2BOSVXCOMRU30N48OXCOM RAN Remote Radio Unit (XRRU)

REGULATORY COMPLIANCE TEST REPORT FCC CFR 47 Part 96 (CBRS Band) Report No.: XCOL08-U2 Part 2 Rev A Company: Globalstar, Inc Model Name: XCOMRU30N48O REGULATORY COMPLIANCE TEST REPORT Company Name: Globalstar, Inc Model Name: XCOMRU30N48O To: FCC CFR 47 Part 96 (CBRS Band) Test Report Serial No.: XCOL08-U2 Part 2 Rev A This report supersedes: NONE Applicant: Globalstar, Inc 9450 Carroll Park Dr San Diego, California 92121 USA Issue Date: 26th May 2026 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory Title: Globalstar, Inc XCOMRU30N48O To: FCC CFR 47 Part 96 (CBRS Band) Serial #: XCOL08-U2 Part 2 Rev A Issue Date: 26th May 2026 Page: 3 of 120 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com Table of Contents 1. TEST SUMMARY .................................................................................................................................. 4 2. TEST RESULTS .................................................................................................................................... 5 2.1. Channel Mask Emissions .............................................................................................................. 5 APPENDIX A - GRAPHICAL IMAGES ................................................................................................... 11 A.1. Channel Mask Emissions ........................................................................................................... 12 Title: Globalstar, Inc XCOMRU30N48O To: FCC CFR 47 Part 96 (CBRS Band) Serial #: XCOL08-U2 Part 2 Rev A Issue Date: 26th May 2026 Page: 4 of 120 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com 1. TEST SUMMARY List of Measurements Test Header Result Data Link 26 dB & 99% Bandwidth Complies See XCOM08-U2 Part 1 Test Report Frequency Stability Complies See XCOM08-U2 Part 1 Test Report Peak Transmit Power Complies See XCOM08-U2 Part 1 Test Report Power Spectral Density Complies See XCOM08-U2 Part 1 Test Report Peak to Average Power Ratio Complies See XCOM08-U2 Part 1 Test Report Conducted Spurious Emissions Complies See XCOM08-U2 Part 1 Test Report Channel Mask Complies View Data Radiated Spurious Emissions Complies See XCOM08-U2 Part 1 Test Report Please note all measurements take duty cycle into account. Title: Globalstar, Inc XCOMRU30N48O To: FCC CFR 47 Part 96 (CBRS Band) Serial #: XCOL08-U2 Part 2 Rev A Issue Date: 26th May 2026 Page: 5 of 120 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com 2. TEST RESULTS 2.1. Channel Mask Emissions Equipment Configuration for Conducted Channel Mask Emissions Variant: 10MHz Duty Cycle (%): 75 Data Rate: 100.00 MBit/s Antenna Gain (dBi): Not Applicable Modulation: 256QAM Beam Forming Gain (Y)(dB): Not Applicable TPC: Not Applicable Tested By: SB Engineering Test Notes: Test Measurement Results CHAIN A Test Frequency Frequency Range Mask 0 – 1 MHz Evaluation Result dBm Limit Margin 3555 MHz 3500 – 3550 MHz Chain A Mask -30.27 -19.00 -11.27 Pass 3560 – 3750 MHz -30.73 -19.00 -11.73 Pass 3625.02 MHz 3500 – 3620 MHz Chain A Mask -30.36 -19.00 -11.36 Pass 3630 – 3750 MHz -30.10 -19.00 -11.1 Pass 3695 MHz 3500 – 3690 MHz Chain A Mask -30.03 -19.00 -11.03 Pass 3700 – 3750 MHz -31.26 -19.00 -12.26 Pass CHAIN B Test Frequency Frequency Range Mask 0 – 1 MHz Evaluation Result dBm Limit Margin 3555 MHz 3500 – 3550 MHz Chain B Mask -30.45 -19.00 -11.45 Pass 3560 – 3750 MHz -30.40 -19.00 -11.40 Pass 3625.02 MHz 3500 – 3620 MHz Chain B Mask -30.19 -19.00 -11.19 Pass 3630 – 3750 MHz -30.03 -19.00 -11.03 Pass 3695 MHz 3500 – 3690 MHz Chain B Mask -28.83 -19.00 -9.83 Pass 3700 – 3750 MHz -31.24 -19.00 -12.24 Pass CHAIN C Test Frequency Frequency Range Mask 0 – 1 MHz Evaluation Result dBm Limit Margin 3555 MHz 3500 – 3550 MHz Chain C Mask -30.59 -19.00 -11.59 Pass 3560 – 3750 MHz -30.74 -19.00 -11.74 Pass 3625.02 MHz 3500 – 3620 MHz Chain C Mask -30.46 -19.00 -11.46 Pass 3630 – 3750 MHz -30.27 -19.00 -11.27 Pass 3695 MHz 3500 – 3690 MHz Chain C Mask -29.81 -19.00 -10.81 Pass 3700 – 3750 MHz -29.95 -19.00 -10.95 Pass Title: Globalstar, Inc XCOMRU30N48O To: FCC CFR 47 Part 96 (CBRS Band) Serial #: XCOL08-U2 Part 2 Rev A Issue Date: 26th May 2026 Page: 6 of 120 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com CHAIN D Test Frequency Frequency Range Mask 0 – 1 MHz Evaluation Result dBm Limit Margin 3555 MHz 3500 – 3550 MHz Chain D Mask -30.66 -19.00 -11.66 Pass 3560 – 3750 MHz -30.95 -19.00 -11.95 Pass 3625.02 MHz 3619 – 3620 MHz Chain D Mask -29.90 -19.00 -10.90 Pass 3630 – 3631 MHz -30.26 -19.00 -11.26 Pass 3695 MHz 3500 – 3690 MHz Chain D Mask -30.45 -19.00 -11.45 Pass 3700 – 3750 MHz -31.71 -19.00 -12.71 Pass Traceability to Industry Recognized Test Methodologies Work Instruction: WI-05 MEASUREMENT OF SPURIOUS EMISSIONS Measurement Uncertainty: …

Text truncated - open the document above for the full version.

2TB-21U 4 Port Antenna / 2H / 1.0m ●2×(3300-4200) MHz ●Integrated RET (AISG 2.0 Compliant), Field Exchangeable ●4.3-10 Connectors Electrical Data (BASTA11.1) Frequency(MHz) 3300-4200 3300-38003800-4200 GainP1/P2 Mid Tilt dBi 17.817.9 Over All Tilts17.7±0.517.8±0.5 Polarization°±45 Horizontal Pattern 3dB Azimuth Beamwidth°64±564±5 Front to Back Ratio, Total Power, 180°±30° dB > 26> 26 Cross-Polar Discrimination At Mechanical Boresight 0°> 18> 18 Over Sector ±60°> 6> 7 Vertical Pattern 3dB Elevation Beamwidth ° 5.4±0.55.0±0.5 Electrical Downtilt0-10 1st Upper Sidelobe SuppressiondB> 16> 16 RF Parameters VSWR< 1.5 Intra - Cluster IsolationdB26 3rd PIM(2 x 43 dBm)dBc< -153 ImpedanceΩ50 Maximum Effective Power per Port W150 — Maximum Effective Power Whole Antenna: 400 W. Prose Technologies | www.prosetechnologies.comRev. 1.0 1/3 The information contained in this document is subject to change without notice. [email protected] 2TB-21U 4 Port Antenna / 2H / 1.0m Mechanical Data (BASTA11.1) Connector Type4 x 4.3-10 Female Connector PositionBottom Lightning ProtectionDC Ground Radome MaterialASA Radome ColorLight Grey Antenna Net Weight5.8 kg12.8 lb Shipping Weight12.3 kg26.5 lb Antenna Dimensions (H x W x D)998 x 180 x 115 mm39.3 x 7.1 x 4.5 in Packing Size (H x W x D)1148 x 308 x 216 mm45.2 x 12.1 x 8.5 in Survival Wind Speed241 km/h150 mph Wind Load @150 km/h (Frontal / Lateral / Max)130 / 57 / 157 N29 / 13 / 35 lbf Mast Diameter Supported50 - 110 mm2.0 - 4.3 in Relative Humidity5% - 95% Operating Temperature Range-40 ~ +60 °C-40 ~ +140 °F RET Specification (BASTA11.1) Compatible StandardsAISG2.0/ 3GPP Power Consumption≤2(stand by); ≤13(operating) Configuration ManagementIntegrated RET, pre-configured Software UpgradabilityTrue Replaceability in FieldTrue Pattern (Sample for reference) 3300-4200 Prose Technologies | www.prosetechnologies.comRev. 1.0 2/3 The information contained in this document is subject to change without notice. [email protected] 2TB-21U 4 Port Antenna / 2H / 1.0m Layout ArrayConnectorFrequency (MHz)Sub Unit #RET TypeRET Serial* ●P11 - 23300-42001MRETRB......XYYxxxxx-MM ●P23 - 43300-42002MRETRB......XYYxxxxx-MM *Remark: X – Year, YY – Week , xxxxx – Serial Number Accessories ItemModelWeightMechanical Tilt Range (°) Mounting Kit70-12.4kg0-10 Compliance — Our quality assurance system and our environmental management system apply to the entire company and are certified according to EN ISO 9001, EN ISO 14001 and OHSAS 18001 — Our products are compliant to the EU Directive RoHS as well as to other environmentally relevant regulations (e.g. REACH) While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. For environmental information, please refer to https://www.rosenbergertechnologies.com/Company.html?id=16 Prose Technologies | www.prosetechnologies.comRev. 1.0 3/3 The information contained in this document is subject to change without notice. [email protected]

MX04FIT365-01 NWAV™X-PolPanelAntenna 4-Port30in.FIT(ForminTighter),3550-3700MHz l X-Pol,smallcell,panelantenna l Suitableforpoleorbuildingmount l 4x4MIMOforCBRS l Integrated(internalRET)forremoteelectricaltiltcontrol Electricalspecification(minimum/maximum)Ports1,2,3,4 Frequencybands,MHz3550-3700 Polarization±45° Averagegainoveralltilts,dBi17.0 Horizontalbeamwidth(HBW),degrees65.0 Front-to-backratio,co-polarpower@180°±30°,dB25 X-Poldiscrimination(CPR)atboresight,dB>18 Verticalbeamwidth(VBW),degrees 1 7.3 Remoteelectricaldowntilt(EDT)range,degrees0-10 Firstuppersidelobe(USLS)suppression,dB 1 17 Cross-polarisolation,port-to-port,dB 1 25 MaxVSWR/returnloss,dB1.5:1/-14.0 Maxpassiveintermodulation(PIM),2x20Wcarrier,dBc-140 Maxinputpowerperanyport,watts100 1 Typicalvalueoverfrequencyandtilt ©2024JMAWireless.Allrightsreserved.Thisdocumentcontainsproprietaryinformation.Allproducts,companynames, brands,andlogosaretrademarks™orregistered®trademarksoftheirrespectiveholders.Allspecificationsaresubject tochangewithoutnotice.+1315.431.7100customerservice@jmawireless.com 01/02/24V2.0 Page1 Mechanicalspecifications Dimensionsheight/width/depth,inches(mm)32.67/11.6/4.53(830/295/115) Shippingdimensionslength/width/height,inches(mm)37.4/16.9/11.8(950/430/300) No.ofRFinputports,connectortype,andlocation4x4.3-10female,bottom RFconnectortorque96lbf·in(10.85N·mor8lbf·ft) Netantennaweight,lb(kg)17.6(8.0) Weightwithsuppliedpipemountbracket,lb(kg)50.2(22.8) Shippingweight,lb(kg)44.1(20) Ratedwindsurvivalspeed,mph(km/h)150(241) Frontalwindloading@150km/h,lbf(N)56.9 FrontviewBackviewBottomview Orderinginformation AntennamodelDescription MX04FIT365-0130inchpanelantenna,4portsCBRSwithRET Mountingkit(included)91900318BRACKETKIT,rangeofmechanicalup/downtilt-2°to12° Optionalaccessories AISGcablesM/FcablesforAISGconnections PCU-1000RETcontrollerStand-alonecontrollerforRETcontrolandconfigurations ©2024 JMAWireless.Allrightsreserved.Thisdocumentcontainsproprietaryinformation.Allproducts,companynames, brands,andlogosaretrademarks™orregistered®trademarksoftheirrespectiveholders.Allspecificationsaresubject tochangewithoutnotice.+1315.431.7100customerservice@jmawireless.com 01/02/24V2.0 Page2 MX04FIT365-01 NWAV™X-PolPanelAntenna Remoteelectricaltilt(RET1000)information RETlocationIntegratedintoantenna RETinterfaceconnectortype8-pinAISGconnectorperIEC60130-9 RETconnectortorqueMin0.5N·mtomax1.0N·m(handpressure&fingertight) RETinterfaceconnectorquantity1pairofAISGmale/femaleconnectors RETinterfaceconnectorlocationBottomoftheantenna Totalno.ofinternalRETs1 RETinputoperatingvoltage,vdc10-30 RETmaxpowerconsumption,idlestate,W≤2.0 RETmaxpowerconsumption,normaloperatingconditions,W ≤13.0 RETcommunicationprotocolAISG2.0/3GPP RETandRFconnectortopology EachRETdevicecanbecontrolledeitherviathedesignatedexternalAISGconnectororRFportasshownbelow: RETdeviceBandRFport 13550-37001-4 Arraytopology 2setsofradiatingarrays P1:3550-3700MHz P2:3550-3700MHz BandRFport 3550-37001-4 ©2024 JMAWireless.Allrightsreserved.Thisdocumentcontainsproprietaryinformation.Allproducts,companynames, brands,andlogosaretrademarks™orregistered®trademarksoftheirrespectiveholders.Allspecificationsaresubject tochangewithoutnotice.+1315.431.7100customerservice@jmawireless.com 01/02/24V2.0 Page3 MX04FIT365-01 NWAV™X-PolPanelAntenna

06/15/2021 © 2021 CCI All rights reserved. Specifications are subject to change. Revision 1.01 DS-QPA65FH2A-V1.0-210615 Quad Port High-Band Antenna QPA65F-H2A DATA SHEET Two foot (0.75 m), WideBand, four port antenna with a 65° azimuth beamwidth covering 3100-4200 MHz frequencies Four wide high band ports covering 3100-4200 MHz, with full spectrum compliance Narrow enclosure with 10.1” (257 mm) width, reducing tower loading issues The Low weight and Low profile of this 65° panel antenna, makes this an ideal solution for Fixed Wireless Access (FWA) and Small Cell/C-RAN Densification deployments LTE Optimized FBR and SPR performance, providing for an efficient use of valuable radio capacity LTE Optimized Boresight and Sector XPD and USL performance, essential for LTE Performance Equipped with 4.3-10 connector Overview The CCI WideBand Antenna is a four port antenna, with four wide High Band ports covering 3100-4200 MHz. The CCI WideBand Antenna provides the capability to deploy 4×4 Multiple-Input Multiple-Output (MIMO). CCI antennas are designed and produced to ISO 9001:2008 certification standards for reliability and quality in our state-of-the-art manufacturing facilities. Applications Ideal for FWA deployments or other deployments where 4×4 MIMO is required in 3.5 GHz spectrum Ready for Network Standardization on 4.3-10 connectors With CCI’s WideBand Antennas, wireless providers can connect platforms to a single antenna, reducing tower load, lease expense, deployment time and installation costs 06/15/2021 © 2021 CCI All rights reserved. Specifications are subject to change. Revision 1.02 DS-QPA65FH2A-V1.0-210615 Quad Port High-Band Antenna QPA65F-H2A SPECIFICATIONS Electrical Specifications4 × High Band Ports for 3100-4200 MHz Frequency Range 3100-3300 MHz3300-3800 MHz3700-4200 MHz Gain 17.6 dBi18.3 dBi18.4 dBi Azimuth Beamwidth (-3dB) 62°59°55° Elevation Beamwidth (-3dB) 7.6°6.5°6.1° Electrical Downtilt 4°4°4° Elevation Sidelobes (1st Upper) < -16 dB< -18 dB< -17 dB Front-to-Back Ratio @180° > 40 dB> 45 dB> 45 dB Cross-Polar Discrimination (at Peak) > 21 dB> 21 dB> 19 dB Cross-Polar Port-to-Port Isolation > 27 dB> 27 dB> 27 dB Voltage Standing Wave Ratio(VSWR) < 1.5:1< 1.5:1< 1.5:1 Passive Intermodulation (2×20W) ≤ -140 dBc ≤ -140 dBc ≤ -140 dBc Input Power Continuous Wave (CW) 100 watts100 watts100 watts Polarization Dual Pol 45°Dual Pol 45°Dual Pol 45° Input Impedance 50 ohms50 ohms50 ohms Lightning Protection DC GroundDC GroundDC Ground BASTA Electrical Specifications* Frequency Range 3100-3300 MHz3300-3800 MHz3700-4200 MHz Gain over Sub Band (dBi) 16.917.817.8 Gain over Sub Band Tolerance (dB) 1.10.40.4 Azimuth Beamwidth Tolerance (°) 2.22.16.6 Elevation Beamwidth Tolerance (°) 0.80.40.5 Electrical Downtilt Deviation (°) 0.50.40.5 First Upper Sidelobes Suppression (dB) 7.713.113.8 Front-to-Back Ratio over ±20° (dB) 30.833.629.2 Cross-polar Discrimination at ±60° (dB) 3.64.24.2 * Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V11.1. All specifications are subject to change without notice. Mechanical Dimensions (L×W×D) 29.5×10.1×3.7 in (750×257×94 mm) Survival Wind Speed > 150 mph (> 241 kph) Front Wind Load 65 lbs (288 N) @ 100 mph (161 kph) Side Wind Load 28 lbs (124 N) @ 100 mph (161 kph) Equivalent Flat Plate Area 2.5 ft 2 (0.2 m 2 ) Weight * 13.2 lbs (6.0 kg) Connector 4 × 4.3-10 female Mounting Pole 2 to 5 in (5 to 12 cm) * Weight excludes mounting 06/15/2021 © 2021 CCI All rights reserved. Specifications are subject to change. Revision 1.03 DS-QPA65FH2A-V1.0-210615 Quad Port High-Band Antenna QPA65F-H2A SPECIFICATIONS Mechanical Bottom View Connector Spacing 06/15/2021 © 2021 CCI All rights reserved. Specifications are subject to change. Revision 1.04 DS-QPA65FH2A-V1.0-210615 Quad Port High-Band Antenna QPA65F-H2A SPECIFICATIONS Typical Antenna Patterns For detailed information on additional antenna patterns, contact customer support at [email protected] 3300 MHz Azimuth & Elevation 4°3600 MHz Azimuth & Elevation 4° 3800 MHz Azimuth & Elevation 4°4100 MHz Azimuth & Elevation 4° 06/15/2021 © 2021 CCI All rights reserved. Specifications are subject to change. Revision 1.05 DS-QPA65FH2A-V1.0-210615 Quad Port High-Band Antenna QPA65F-H2A ORDERING Parts & Accessories QPA65F-H2AA-K Two foot (0.75 m) QuadPort antenna with 65° azimuth beamwidth, 4.3-10 female connectors and MBK-03 mounting brackets MBK-03 Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment 06/15/2021 © 2021 CCI All rights reserved. Specifications are subject to change. Revision 1.06 DS-QPA65FH2A-V1.0-210615 Mounting Bracket Kit MBK-03 ACCESSORIES Mechanical Weight 9.8 lbs (4.4 kg) Hinge Pitch 13 in (330 mm) Mounting Pole Dimension 2 to 5 in (5 to 12 cm) Fastener Size M10 Installation Torque 15 ft·lbs (20 N·m) Mechanical Tilt Adjustment 0° - 12° MBK-03 Top Adjustable BracketMBK-03 Top Adjustable Bracket Side View MBK-03 Bottom Fixed Bracket 06/15/2021 © 2021 CCI All rights reserved. Specifications are subject to change. Revision 1.07 DS-QPA65FH2A-V1.0-210615 Quad Port High-Band Antenna QPA65F-H2A STANDARDS & CERTIFICATIONS Standards & Compliance Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24 Certifications Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001

DATASHEET Small Cell AW3924-T0-FAW3924-T0-F Common Name-Common Name- 4 Port, 11", C-Band, 65° Small Cell 3300-4200MHz4Fixed13.365° FrequencyPortsTiltGainBeamwidth PRODUCT INFORMATIONPRODUCT INFORMATION This ultracompact form factor solution was developed for 3xed wireless applications to cover the extended C-band 3300-4200MHz. The AW3924-T0-F provides small cell coverage for 4G and 5G private networks using the 3.5 GHz Citizens Broadband Radio Service (CBRS, n48) and C-band (n77, n78) spectrum. This four port small cell antenna offers a wide elevation beamwidth with a fixed electrical downtilt. APPLICATIONAPPLICATION Alpha Wireless small cell provides sector coverage whilst in an ultra-compact radome design. The wide-band antenna is designed to be installed in urban environment where low visual impact is required. There are a number of mounting options available making deployments on lamp posts, utility poles, walls and other vertical structures possible. The 4 port antenna supports 4X4 MIMO for improved data throughput with options for various fixed tilt settings. STANDARD & CERTIFICATIONSSTANDARD & CERTIFICATIONS CertificationBS EN ISO 9001:2015 FEATURESFEATURES Wide Band antenna covering 3300-4200MHz Covering NR bands n48, n77 and n78. Compact design for Small Cell deployment - Low visual impact Supports 4x4 MIMO for improved throughput Dual Cross polarization antenna +/- 45 alphawireless.comalphawireless.com Page 1/5 Publish Date: Publish Date: 13.02.202513.02.2025Revision no: Revision no: 1717 (MB-2 Col)(MB-2 Col) The paramenters in this specification follow the definitions and recommendations per NGMN P-Basta, Release 9.6. Small Cell AW3924-T0-FAW3924-T0-F TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION Electrical SpecificationsElectrical Specifications Frequency RangeMHz3300 - 38003800 - 4200 PolarisationDegree+/- 45° Slant Linear GainBastadBi12.8±0.513.3±0.5 MaxdBi13.313.8 Azimuth BeamwidthDegree65° Elevation BeamwidthDegree22° 20° Electrical DowntiltDegreeT0° Electrical Downtilt DeviationDegree<1° ImpedanceOhms50 VSWR<1.5 Return LossdB>14 IsolationdB>25 Front to Back Ratio: Copolarization +/-30°dB>25 Cross-Polar DiscriminationdB>16 Maximum Effective Power Per PortW50 Representative Pattern FilesRepresentative Pattern Files AzimuthAzimuthElevationElevation For radiation pattern files, please login at www.alphawireless.com alphawireless.comalphawireless.com Page 2/5 Publish Date: Publish Date: 13.02.202513.02.2025Revision no: Revision no: 1717 (MB-2 Col)(MB-2 Col) Small Cell AW3924-T0-FAW3924-T0-F TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION Mechanical SpecificationsMechanical Specifications Dimensionsmm (in)285 (11.2) x 280 (11) x 85 (3.3) - (LxWxD) Packing Size (LxWxD)mm (in)425 (16.7) x 350 (13.4) x 210 (7.5) Net Weight (antenna)kg (lb)3.05 (6.7) Shipping Weightkg (lb)4.2 (11.1) Connector Type (Female)-4.3-10 Connector Quantity--4 Connector Position--Bottom Windload Frontal (at Rated Wind Speed: 150km/h)N (Ibf)105 (24) Windload Lateral (at Rated Wind Speed: 150km/h)N (Ibf)34 (8) Survival Wind Speedkm/h (mph)200 (125) Radome Material-ASA Radome ColourRAL7035 Product Compliance Environmental--RoHS Lightning Protection--DC Grounded Cold Temperature SurvivalºC (ºF)-40 (-40) Hot Temperature SurvivalºC (ºF)70 (158) Array Layout and RET InformationArray Layout and RET Information alphawireless.comalphawireless.com Page 3/5 Publish Date: Publish Date: 13.02.202513.02.2025Revision no: Revision no: 1717 (MB-2 Col)(MB-2 Col) Small Cell AW3924-T0-FAW3924-T0-F TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION Mechanical Illustration Mechanical Illustration All measurements are in mm (in)All measurements are in mm (in) Page 4/5 Publish Date: Publish Date: 13.02.202513.02.2025 alphawireless.comalphawireless.com Revision no: Revision no: 1717(MB-2 Col)(MB-2 Col) Small Cell AW3924-T0-FAW3924-T0-F TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION Mounting Bracket KitMounting Bracket Kit CL-V-158 (Mounting Kit included with Antenna)CL-V-158 (Mounting Kit included with Antenna) Tilt function of -18° to 0° is available when used in conjunction with the CL-V-156 Scissor Bracket (Optional Extra). Tilt function of -18° to 0° is available when used in conjunction with the CL-V-156 Scissor Bracket (Optional Extra). Bracket spacing of 335mm @ B (Image below).Bracket spacing of 335mm @ B (Image below). Mounting of the bracket to the pole must be completed while the bracket is set to 0°.Mounting of the bracket to the pole must be completed while the bracket is set to 0°. Note: Tilt should be checked with Inclinometer for accuracy. Note: Tilt should be checked with Inclinometer for accuracy. Mounting Kit Tilt RangeMounting Kit MaterialMounting Kit Pole Diameter n/aStainless Steel50mm-115mm (2" to 4.5") Ordering InfoOrdering Info Order Code - AntennaOrder Code - AntennaDescriptionDescription AW3924-T0-F Zero Degrees Fixed Tilt with 4.3/10 Connectors DescriptionDescriptionOrder Code - AntennaOrder Code - Antenna AW1012-2-FM-FMRF Jumper Cable, connector types 4.3-10 (m) / 4.3-10 (m), length 2 metres (6'6") AW1012-2-FM-NMRF Jumper Cable, connector types 4.3-10 (m) / N-Type (m), length 2 metres (6'6") AW1014-2-FM-TMRF Jumper Cable, connector types 4.3-10 (m) / Nex10 (m), length 2 metres (6'6") EnquiriesEnquiries Global Headquarters Global Headquarters Ashgrove Business Centre, Ballybrittas, Portlaoise, R32 DT0A, IRELAND [email protected] +353 57 86 33847 North AmericaNorth America 7301 W. 129th Street, Suite 150, Overland Park, KS 66213, USA [email protected] +1 913 279 0008 DISCLAIMER The information in this document is provided solely regarding Alpha Wireless products. The information is not a guarantee of performance or characteristics. Alpha Wireless reserves the right to modify, change, amend, improve or make corrections to this document and its products, at any time and its sole discretion without prior written consent or notice. No license to any intellectual property rights is granted or implied u…

Text truncated - open the document above for the full version.

DATASHEET Panel AW3923-T0-FAW3923-T0-F Common Name-Common Name- 4 Port, 29.5", 65° C-Band Panel 3300-4200MHz4Fixed1865° FrequencyPortsTiltGainBeamwidth PRODUCT INFORMATIONPRODUCT INFORMATION This solution was developed for 2xed wireless applications to cover the extender C-band 3300-4200MHz. This four port antenna supports 4x4 MIMO applications. This compact sector antenna supports 4×4 MIMO for 2xed- wireless access (FWA) and mobile private networks operating in the 3.5 GHz Citizens Broadband Radio Service (CBRS, n48, n78) and extended C-band (n77). Equally spacing three or four of the AW3923-T0-F 65° sector panels around the tower infrastructure would enable complete 360° of coverage. Panel antennas are the most used solution to provide directive coverage in a wireless network. These panel antennas offer multiple ports and frequency bands and are designed to deliver high gain across the sector. They are commonly available with 33°, 45°, 60°, 90°, and 120° beamwidths. Alpha Wireless provides a wide array of sector panel solutions that meet the needs of the most intricate deployment requirements. APPLICATIONAPPLICATION Alpha Wireless panel antennas provide wireless network operators the highest performance and quality. Panel antennas are generally used in sectorized applications. These antennas are designed for optimal radiation patterns improving overall network performance. A horizontally spaced array provides enhance MIMO performance with full 4x4 operation or receive diversity RF functions. STANDARD & CERTIFICATIONSSTANDARD & CERTIFICATIONS CertificationBS EN ISO 9001:2015 FEATURESFEATURES Wide Band antenna covering 3300-4200MHz 4x4 MIMO for maximum throughput Supports NR bands n48, n77, & n78 Fixed electrical down tilt Mounting bracket with variable tilt (included). alphawireless.comalphawireless.com Page 1/5 Publish Date: Publish Date: 13.02.202513.02.2025Revision no: Revision no: 1111 (MB-2 Col)(MB-2 Col) The paramenters in this specification follow the definitions and recommendations per NGMN P-Basta, Release 9.6. Panel AW3923-T0-FAW3923-T0-F TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION Electrical SpecificationsElectrical Specifications Frequency RangeMHz3300 - 38003800 - 4200 PolarisationDegree+/- 45° Slant Linear GainBastadBi17.5±0.517.5±0.5 MaxdBi1818 Azimuth BeamwidthDegree65° Elevation BeamwidthDegree 7° 7° Electrical DowntiltDegreeT0° Electrical Downtilt DeviationDegree<1° ImpedanceOhms50 VSWR<1.5 Return LossdB>14 IsolationdB>25 Front to Back Ratio: Total Power +/-30°dB>30 Upper Sidelobe Suppression, Peak to 20ºdB>18 Cross-Polar DiscriminationdB>16 Maximum Effective Power Per PortW150 Representative Pattern FilesRepresentative Pattern Files AzimuthAzimuthElevationElevation For radiation pattern files, please login at www.alphawireless.com alphawireless.comalphawireless.com Page 2/5 Publish Date: Publish Date: 13.02.202513.02.2025Revision no: Revision no: 1111 (MB-2 Col)(MB-2 Col) Panel AW3923-T0-FAW3923-T0-F TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION Mechanical SpecificationsMechanical Specifications Dimensionsmm (in)750 (29.5) x 280 (11) x 85 (3.3) - (LxWxD) Packing Size (LxWxD)mm (in)823 (32.4) x 337 (13.2) x 175 (6.9) Net Weight (antenna)kg (lb)4.3 (9.6) Net Weight (mount)kg (lb)1.5 (3.4) Shipping Weightkg (lb)5.8 (12.8) Connector Type (Female)-4.3-10 Connector Quantity--4 Connector Position--Bottom Windload Frontal (at Rated Wind Speed: 150km/h)N (Ibf)220 (50) Windload Lateral (at Rated Wind Speed: 150km/h)N (Ibf)80 (18) Survival Wind Speedkm/h (mph)200 (125) Radome Material-ASA Radome ColourRAL7035 Product Compliance Environmental--RoHS Lightning Protection--DC Grounded Cold Temperature SurvivalºC (ºF)-40 (-40) Hot Temperature SurvivalºC (ºF)70 (158) Array Layout and RET InformationArray Layout and RET Information alphawireless.comalphawireless.com Page 3/5 Publish Date: Publish Date: 13.02.202513.02.2025Revision no: Revision no: 1111 (MB-2 Col)(MB-2 Col) Panel AW3923-T0-FAW3923-T0-F TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION Mechanical Illustration Mechanical Illustration All measurements are in mm (in)All measurements are in mm (in) Page 4/5 Publish Date: Publish Date: 13.02.202513.02.2025 alphawireless.comalphawireless.com Revision no: Revision no: 1111(MB-2 Col)(MB-2 Col) Panel AW3923-T0-FAW3923-T0-F TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION Mounting Bracket KitMounting Bracket Kit CL-V-104 Mount Kit (Mount Kit included with antenna)CL-V-104 Mount Kit (Mount Kit included with antenna) Mounting Kit Tilt RangeMounting Kit MaterialMounting Kit Pole Diameter +2° to -10°Stainless Steel50mm-115mm (2" to 4.5") Ordering InfoOrdering Info Order Code - AntennaOrder Code - AntennaDescriptionDescription AW3923-T0-F Zero Degrees Fixed Tilt with 4.3/10 Connectors DescriptionDescriptionOrder Code - AntennaOrder Code - Antenna AW1012-2-FM-FMRF Jumper Cable, connector types 4.3-10 (m) / 4.3-10 (m), length 2 metres (6'6") AW1012-2-FM-NMRF Jumper Cable, connector types 4.3-10 (m) / N-Type (m), length 2 metres (6'6") AW1014-2-FM-TMRF Jumper Cable, connector types 4.3-10 (m) / Nex10 (m), length 2 metres (6'6") PADC 1000Portable AISG Controller SADC 2000Site AISG Controller AW0326-3-PM-PFAISG Jumper Cable Lengths 3 metres (9' 10") AW0326-10-PM-PFAISG Jumper Cable Lengths 10 metres (32' 9") AW0326-25-PM-PFAISG Jumper Cable Lengths 25 metres (82') AW0326-50-PM-PFAISG Jumper Cable Lengths 50 metres (164') EnquiriesEnquiries Global Headquarters Global Headquarters Ashgrove Business Centre, Ballybrittas, Portlaoise, R32 DT0A, IRELAND [email protected] +353 57 86 33847 North AmericaNorth America 7301 W. 129th Street, Suite 150, Overland Park, KS 66213, USA [email protected] +1 913 279 0008 DISCLAIMER The information in this document is provided solely regarding Alpha Wireless products. The information is not a guarantee of performance or characteristics. Alpha Wireless reserves the right to mo…

Text truncated - open the document above for the full version.