2BP5K-YM-001Serpentine Thrusting Wearable Dildo

PRODUCT MANUALS Thank you for choosing The Serpentine Thrusting Wearable Dildo! Prior to first use, please ensure your new device is fully charged. We also recommend reading the provided instructions carefully and retaining the manual for future reference. 18 Made in China Product View 6.69in/170mm 1.48in/37.5mm 5.16in/131mm 1.57in/40mm 3.23in/82mm5.87in/149mm Once the product is powered on, the wave-shaped button independently controls the vibration of the flower-shaped component. Once the product is powered on, the circular button provides independent control over the serpentine thrusting function of the dildo.This button also remotely powers off the device. 1 Note: Sizes are manually measured and may vary slightly. Wave-Shaped Button Function: Circular Button Function: Straps Introduction 2 1.Lay the straps flat.3.Slide strap under buckle heart. 4.Thread strap top through buckle crown. 5.Fit and Fasten.6.Wear the sit and ride vibrator. 2.Thread the strap through the designed holes from top to bottom. 32cm/12.6inch 27cm/10.63inch 35cm/13.78inch 27cm/10.63inch L (Large) S (Small) Tip: For solo play, wear inward. For lesbian partnered play, simply switch it outward. Product Parameters 3 Serpentine Thrusting Wearable Dildo 10 Serpentine Thrusting & Vibrating Modes YM-001 Soft Liquid Silicone 5.87*3.23*6.69in 0.95lb/430g lPX7 Waterproof USB Magnetic Charging Buttons, Wireless Remote & Smart App 1000mAh 8M(26FT) 60-90Mins 60Mins <50 DB – Solo: Up to 10M(32.8FT) – With Partner: Unlimited (Anywhere) Product Name: Function: Model Name: Material: Dimensions: Net Weight: Waterproof Rating: Charging Method : Control Method: Battery Capacity: Remote Range: APP Control Range: Charging Time: Runtime: Noise: Operation Guide 4 STEP 1 Press and hold the power button for 3 seconds on the vibrator to urn on the vibrator, lights up STEP 2 Short press once to activate the default function. STEP 3 Press again to switch frequency, frequency cycles. STEP 4 Press and hold the power button for 3 seconds on the vibrator to turn off the vibrator, lights off. APP Control Usage Guide 5 1.Download and install the App 2.First-Time Registration Guide: Scan the QR code on the right with your phone. Select the one matches your phone, download and install the App follow the prompts. Remark: For IOS system, search for "Love Spouse" in the Apple Store. For Android system, search for "Love Spouse" in Google Play. 2.1 Open the "LoveSpouse Remote Connec- tion" app. 2.2 Tap Register, then enter your email, password, re-enter password, and verification code. 2.3 Tap Register again to complete. Tip: The app features become available only when the product is powered on. 3.Device Binding 6 4.Lost Your Binding Code? After logging in for the first time, you need to bind the device, click "+" (Pic.1). The device scan box (Pic.2) will appear. If the scan is unsuccessful, you can manually enter the number " 7893" (click ”input”) below the identification code. After the scan is successful, as shown in Pic.4. Pic.2 Pic.4 Pic.1 4.1 Take a clear photo of your device and submit it via the Feedback section. 4.2 Our customer service will provide you with a new code. Save this image to your phone album. 4.3 In the app, tap + on the homepage, then select Album (top right) to scan and complete binding. Scan the device identification code on the manual (Pic.3). Pic.3 7893 7 5.Equipment control 6.How Do You Connect It in Interactive Mode? Please turn on Bluetooth before using the product, Switch on the device and follow the software prompts to connect the device. Long press the device can rename or delete the device .Click the "My Device" icon in App to start your journey, Many vibration modes await your exploration. Note: In interactive mode, you need to add the other party as a friend first. Only others accept invitation, interactive connection will success. If the device is on your side and you want to invite your partner for a long-distance interaction, please refer to the following steps: 6.1.Both you and your partner have registered a Love Spouse account and both the devices are connected to the app and bound the product code( 7893). 6.2. Click "Mine"-"Personal Information" to find personal ID, and tap "+" on interactive mode, and enter your boyfriend's ID/Email to add him as your contact, Wait for him to agree to this add request, then you can make voice or video call with him on interactive mode, meanwhile he can control your device even from far away. (You can download this APP by searching for Love Spouse in Google Play or Apple Store or you can scan the QR code in the manual to download this APP. 8 Button Battery Information & Warinings In The Remote Controller (CR2032, 3.0V) 1. General Instructions (a) Dispose of used CR2032 batteries according to local regulations. Keep away from children. Do not dispose in household trash or incinerate. (b) Even a used CR2032 batteries may cause serious injury or death if mishandled. (c) Call your local poison control center (or equivalent) if ingested. (d) Compatible Battery Type: CR2032 (3V Lithium Metal Cell). (e) Nominal Voltage: 3.0V. (f) Non-rechargeable batteries must not be recharged. (g) Do not forcibly discharge, recharge, disassemble, heat or incinerate. These actions may cause venting, leakage, or explosion leading to chemical burns. 2. Replace CR2032 Button Battery (a) Ensure correct battery orientation aligns with polarity markings (+/-). (b) Do not mix new and old CR2032 batteries, different brands, or battery types (e.g., alkaline, carbon-zinc, or rechargeable cells). (c) Remove and recycle/dispose of batteries immediately from unused devices per local regulations. (d) Always secure the battery compartment fully. Discontinue use if the compart- ment cannot be closed properly, remove batteries, and keep away from children. 9 Package Listing Service and Promise: If you have any issues, questions, or concerns about our products, please contact us via email or APP. We will resolve your is…

Text truncated - open the document above for the full version.

Shenzhen Easybuy Trading Co., Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: February 28, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BP5K-YM-001 Shenzhen Easybuy Trading Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Shenzhen Easybuy Trading Co., Ltd FRN: 0037141033 Address: Room B503, Building B, Tangxi Jinggongfang, Gushu Community, Xixiang Subdistrict, Bao'an District, Shenzhen 518103 China. Signature: Contact Person: Xixian Tao Tel: 15989633365 Email: [email protected]

Rev 1/26/2023 Shenzhen Easybuy Trading Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-28-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BP5K-YM-001 [Shenzhen Easybuy Trading Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Easybuy Trading Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Xixian Tao Rev 1/26/2023 Shenzhen Easybuy Trading Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-28-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BP5K-YM-001 [Shenzhen Easybuy Trading Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Xixian Tao

Page 1 of 3 1. General Information 1.1 Antenna Information Manufacturer: Shenzhen Easybuy Trading Co., Ltd Address of Manufacturer: Room B503, Building B, Tangxi Jinggongfang, Gushu Community, Xixiang Subdistrict, Bao'an District, Shenzhen 518103 China. Product Name: 2.4GHz Antenna Model Name: YM-001 Frequency Range: 2400MHz - 2500MHz Type of Antenna: Integrated Antenna Antenna Gain: 0dBi (Max.) Impedance: 50 ohm Antenna View: Length (30.97mm) Page 2 of 3 2. Antenna Specification information 2.1 Gain Frequency Peak Gain (dBi) Polarity 2400MHz 0 Horizontal 2400MHz -0.54 Vertical 2450MHz -1.25 Horizontal 2450MHz -1.51 Vertical 2500MHz -1.68 Horizontal 2500MHz -1.27 Vertical Page 3 of 3 2.2 Radiation Pattern View

Shenzhen Easybuy Trading Co., Ltd Date: February 28, 2026 Product Model Number: YM-001, YM-0099, YM-0101, YM-0110, YM-0120, YM-0130, YM-0140, YM-0150, YM-0176, YM-0125, YM-0128, YM-0019, YM-2356 FCC ID: 2BP5K-YM-001 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Xixian Tao Contact Listed on FCC Wesbite Title: Sales Manager Tel.: 15989633365 Email: [email protected] On behalf of: Shenzhen Easybuy Trading Co., Ltd

Shenzhen Easybuy Trading Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 28, 2026 Subject; Request for Confidentiality FCC ID: 2BP5K-YM-001 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Xixian Tao Title: Sales Manager

Shenzhen Easybuy Trading Co., Ltd Model Difference Statement Dear Sir/Madam, FCC ID: 2BP5K-YM-001 Date: February 28, 2026 Added models YM-0099, YM-0101, YM-0110, YM-0120, YM-0130, YM-0140, YM-0150, YM-0176, YM-0125, YM-0128, YM-0019, YM-2356 basis of the original product YM-001 The manufacturer declares that the listed series models have different appearance colors and model names from the main model, but the circuits and electronic structures are the same. Sincerely, Signature： By: Xixian Tao Title: Sales Manager Tel.: 15989633365 Email: [email protected] On behalf of: Shenzhen Easybuy Trading Co., Ltd

Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report Annex A. EUT External Photos Model: YM-001 EUT View 1 EUT View 2 Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report EUT View 7

Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Labe Size: 2cm x 1cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report Annex B. EUT Internal Photos EUT Internal View 1 EUT Internal View 2 Integrated ANT Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Wireless charging receiving ANT

FCC ID: 2BP5K-YM-001 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 1.35 1(±1) 2 1.58 2402 5 0.489749 3.0 So a SAR test is not required

Report No: SSP26020035-1E FCC Test Report Page 1 of 33 FCC TEST REPORT FCC ID: 2BP5K-YM-001 Report No. : SSP26020035-1E Applicant : Shenzhen Easybuy Trading Co., Ltd Product Name : Serpentine Thrusting Wearable Dildo Model Name : YM-001 Test Standard : FCC Part 15.247 Date of Issue : 2026-02-27 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26020035-1E FCC Test Report Page 2 of 33 Test Report Basic Information Applicant..................................: Shenzhen Easybuy Trading Co., Ltd Address of Applicant...............: Room B503, Building B, Tangxi Jinggongfang, Gushu Community, Xixiang Subdistrict, Bao'an District, Shenzhen 518103 China. Manufacturer..........................: Shenzhen Easybuy Trading Co., Ltd Address of Manufacturer........: Room B503, Building B, Tangxi Jinggongfang, Gushu Community, Xixiang Subdistrict, Bao'an District, Shenzhen 518103 China. Product Name.........................: Serpentine Thrusting Wearable Dildo Brand Name.............................: RAGINARD Main Model..............................: YM-001 Series Models..........................: YM-0099, YM-0101, YM-0110, YM-0120, YM-0130, YM-0140, YM-0150, YM-0176, YM-0125, YM-0128, YM-0019, YM-2356 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-02-04 to 2026-02-09 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26020035-1E FCC Test Report Page 3 of 33 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................…

Text truncated - open the document above for the full version.

Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP26020035-1E FCC ID: 2BP5K-YM-001 Annex of Test Report Radiated Emission Test View Above 1GHz