2BPD4-0003Wireless charge of the mobile power supply

MAGNETIC POWER BANK SUPER SLIM WEBSITE: www.GoiHome.com SUPPORT: 877 543 3540 PACKAGE INCLUDES: (1) 5000mah magnetic powerbank (1) charging cable (1) user manual 2024 © Lifeworks Technology Group LLC. New York, NY 10018 iHome® is a registered trademark of SDI Technologies Inc., used under license. iPhone® is a trademark of Apple Inc., registered in the U.S. and other countries. All other brands and logos are trademarks of their respective companies. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum. *Actual products may dier slightly from Images. MADE IN CHINA RE-CHARGING THE POWER BANK PRODUCT SPECIFICATIONS LED INDICATOR 5000 MAH POWER BANK A. Press and hold the power button for 1 second to turn on. The LED indicator will light up. B. Plug the USB-C cable into the charging port and plug the other end into your device. LED indicator will light up and charging will begin automatically. A. Press and hold the power button for 1 second to turn on. The LED indicator will light up. B. Place your MagSafe compatible device on the magnetic wireless charging pad of the power bank. LED indicator will light up and charging will begin automatically. ◦Insert the included USB-A to USB-C cable to a power source, a USB charger (sold separately). Plug the USB-C end into the USB port to begin the recharging process. ◦LED will light up, indicating the power bank is charging. ◦When power bank is fully charged, all 4 LED's will turn o. 4-LEVEL BATTERY CHARGE INDICATOR: 1 of 4 White LED's is illuminated: 0-25% battery life 2 of 4 White LED's is illuminated: 25-50% battery life 3 of 4 White LED's is illuminated: 50-75% battery life 4 of 4 White LED's is illuminated: 75-100% battery life Type C Input : 5V2.1 A Type C Output : 5V2.1A Wireless Output: 5W Total Output :12W Max 1. USB-C INPUT & OUTPUT CHARGING PORT 2. LED INDICATOR 3. POWER BUTTON 4. MAGNETIC CHARGING PAD WARNINGS ◦If this device is not used for a long time, please charge it at least every 3 months. ◦It might produce light heat during charging, which is normal as long as it's below 55°C (131°F). ◦Always keep this device dry and do not clean it with chemical agents. ◦Go green and recycle this device at designated place. ◦Children must use it under adult supervision. ◦Do not crush, disassemble, impale or put this device into water. ◦Do not use it to charge devices with non compatible current and voltage, which will cause re or other problems. BACK CHARGING YOUR DEVICES USING THE USB CHARGING PORT CHARGING YOUR DEVICES USING THE MAGNETIC CHARGING PAD COMPATIBILITY iPhone 12 & newer, and other wireless charging devices USB-A and USB-C Charging Cables FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Rev 1/26/2023 Shenzhen GPO Tech CO., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-10-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BPD4-0003 [Shenzhen GPO Tech CO., LTD] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen GPO Tech CO., LTD] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Signature： By: Jindong Huang Rev 1/26/2023 Shenzhen GPO Tech CO., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-10-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BPD4-0003 [Shenzhen GPO Tech CO., LTD] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signature： By: Jindong Huang

Shenzhen GPO Tech CO., LTD U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: 12-10-2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BPD4-0003 Shenzhen GPO Tech CO., LTD (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Shenzhen GPO Tech CO., LTD FRN: 0037030798 Address: 708, Building 3, South Taiyun Chuanggu, Fenghuang Street, Tangwei Community, Guangming District, Shenzhen, China Signature: Contact Person: Jindong Huang Tel: 13632537353 Email: [email protected]

ShenzhenZhideElectronicsCo., LTD acknowledgement visitorone- panelleddoor CUSTOMER: SPECIFICATIONFORAPPROVAL Sources Customernumber: CUSTP/N: Internalmaterial number: LCXP/N: productmodel DESC: sundesignated time DATE: printingplate stemorrootof plants Version: 34200019 ZD-WY Ø20.5*39-0.08*24*2-10TS-35mm-5.3*43.5CC 2024/4/29 A.1 fabrication PREPAREDBY examineand verify CHECKEDBY ratify APPROVEDBY Thecustomeracknowledged CUSTOMERAPPROVE TianPeng 2024/1/24 LiXiaogqi January 24,2024 DuanRenliang January24,2024 ZD-GZ001 Address:6thFloor,BuildingA,JinliIndustrialPark,ShangmuguVillage,Pinghu Street,LonggangDistrict,Shenzhen Tel:0755-28265394 E-mail:[email protected] ProductspecificationsheetSP- ECIFICATION Drawingnumber:ZD-WY VersionA/0 Producedby TianPengon April9, 2024 Review:Duan Renliang2024/ 4/9 Page2of4 customer code specifications andmodels Ø20.5*39-0.08*24*2-10TS- 35mm-5.3* 43.5CC Customerpart number: 34200019 Internalpart number:ZD-WY Versionchangehistory VersionChangeHistory editionRev Beforechange(Be- foreChange) AfterChangeChangedate ratify ApprovedBy A/0 First release ----- 2024/1/24 DuanRenliang A/1 Double-sidedtapeis neededonbothsides ofthecoilmagnetic surface Thecolorofthebackglue onthecoilsurfaceischa- nged yellow 2024/4/9 DuanRenliang BillOfMaterial Billofmaterial order number nameofmaterial Internalpartnumber Materialspecificat- ions unit dosage remarks 1 coil Enamelwire0.08*24P* 2 can 2.813 2 Harddisk 43.5*5.3*0.65 PCS 1 3 gum 8x42.5x0.08(thin model) PCS 1 gum 8x42.5x0.08(thin yellow) pcs 1 [Typetext][Typetext][Typetext] ProductspecificationSPECIFICATION Drawingnumber:ZD-WY printing plate stemor rootof plants A / 1 Produced by Tian Pengon April9, 2024 Review:DuanRen - liang2024/4/9 Page3 of 4 customer code specifications andmodels Ø20.5*39-0 .08*24*2-1 0TS-35mm-5.3* 43.5CC Customer partnumb- er: 34200019 Internalpart number:ZD-WY A B C D E F H H1 H2 - - - - - - - - - - - - --- 20.5 ±0.5 3 9 - ± 1 5.3 ±0.5 43. 5 ± 0.5 3 ± 1 3 5 ± 2 0.6 ± 0. 1 0.65 ±0.1 1.5 ±0.4 - - - - - - - - - - - - --- 1. DIMENSION:(mm)WindingdieØ20.5coilweight:2.673 Note:Themagneticsheetcoilis double-sidedwithdouble-sidedbackadhesive. 1. Thecoilis woundin thewayshownin Figure1, andtheleadwiresarecrossedout. Figure 1: Coil Figure 2: Hard magnetic sheet Figure 3: Combination of coil and hard magnetic sheet [Typetext][Typetext][Typetext] - - - - - - 2.Themagneticsheetspecificationis:43.5*5.3*0.65hardmagnet. 3.Thecoil'sstartandendlinesareattachedtothemagneticsheetinreverse orientation.(Thecoilisnotflat.)4.Double-sidedadhesivemeasuringD8*42.5*0.08mmis appliedtothebackofthemagneticsheet,whilethecoilsideiscoveredwithD8*42.5* 0.08mm(yellow). II.Schematicdiagram: WindingSpecifications: order number NO terminal TERMINAL Wir e dia met er W I R E Wiredecomposition temperatureTempe- rature numberof turns Turns Windingdirec- tionWinding Direction L1 S F Enamelwire2* 0.08*24P*2 180-250degrees 10TS anticlockwise [Typetext][Typetext][Typetext] IV.ElectricalcharacteristicsELECTRICALCHARACTERISTIC: TemperatureTEMPERATURE:25±10°C,humidityRELATIVEHUMIDITY:65±20% order number NO Diskmater- ial Disk material f e e l mea sur e L S Q price impedance DCR Testconditions TESTFREQUENCY measuringand testinstrume- nts TEST EQUIPMENT S L1 4.0uH±10% (singlecoil) >20 84mΩ ±10%100KHz/1.0V 4091C L2 Harddisk 6.5uH±10% (fittingmagn- eticsheet) >3084mΩ±10%100KHz/1.0V 4091C [Typetext][Typetext][Typetext] ProductspecificationsheetSPECI- FICATION Drawingnumber:ZD-WY VersionA/0 Producedby TianPengon April9,2024 Review:DuanRe- nliang2024/4/9 Page4of4 customer code specifications andmodels Ø20.5*39-0.08*24*2-10TS-35mm- 5.3* 43.5CC Customerpart number: 34200019 Internalpart number:ZD-WY V.Packagingmethod: 1.Onebox9PCS 2.Onelayerof360PCS 3.Oneboxwithfivelayers1800PCS/case

Shenzhen GPO Tech CO., LTD Date: December 10, 2025 Product Model Number: 2IHPP1016-BLK-R2, 2IHPP1016, 2IHPP1016- PPL-R2, 2IHPP1016-WHT-R2, PW22-1C-5K FCC ID: 2BPD4-0003 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Contact Listed on FCC Wesbite Signature： By: Jindong Huang Title: Manager Email: [email protected] Telephone: 13632537353 On behalf of: Shenzhen GPO Tech CO., LTD

Shenzhen GPO Tech CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 10, 2025 Subject; Request for Confidentiality FCC ID: 2BPD4-0003 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature： By: Jindong Huang Title: Manager

Shenzhen GPO Tech CO., LTD Model Difference Statement FCC ID: 2BPD4-0003 Model Name: 2IHPP1016-BLK-R2, 2IHPP1016, 2IHPP1016-PPL-R2, 2IHPP1016-WHT-R2, PW22-1C-5K Date: December 10, 2025 Dear Sir/Madam, Added models 2IHPP1016, 2IHPP1016-PPL-R2, 2IHPP1016-WHT-R2, PW22-1C-5K basis of the original product 2IHPP1016-BLK-R2. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Signature： By: Jindong Huang Title: Manager Email: [email protected] Telephone: 13632537353 On behalf of: Shenzhen GPO Tech CO., LTD

Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report Annex A. EUT External Photos 2IHPP1016-BLK-R2 EUT View 1 EUT View 2 Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report EUT View 3 EUT View 4 Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report EUT View 5 EUT View 6 Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report EUT View 7

Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Labe Size: 3cm x 2cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label

Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report Annex B. EUT Internal Photos 2IHPP1016-BLK-R2 EUT View 1 EUT View 2 Coil ANT1 Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report EUT View 3 EUT View 4 Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report EUT View 5

Report No: DSP25111718-2H MPE Test Report Page 1 of 14 MPE Test Report FCC ID: 2BPD4-0003 Report No. : DSP25111718-2H Applicant : Shenzhen GPO Tech CO., LTD Product Name : Wireless charge of the mobile power supply Model Name : 2IHPP1016-BLK-R2 Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2025-12-03 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: DSP25111718-2H MPE Test Report Page 2 of 14 Test Report Basic Information Applicant..................................: Shenzhen GPO Tech CO., LTD Address of Applicant...............: 708, Building 3, South Taiyun Chuanggu Tangwei Community, Fenghuang Street Guangming District, Shenzhen China Manufacturer..........................: Huizhou GPO technology Co., Ltd Address of Manufacturer........: F2-5 Building 9, Hanyabei District section, Ganpo Village, Zhenlong town, Huiyang District, Huizhou City Product Name.........................: Wireless charge of the mobile power supply Brand Name.............................: - Main Model..............................: 2IHPP1016-BLK-R2 Series Models..........................: 2IHPP1016, 2IHPP1016-PPL-R2, 2IHPP1016-WHT-R2, PW22-1C-5K Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2025-11-21 to 2025-12-02 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: DSP25111718-2H MPE Test Report Page 3 of 14 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................7 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Setup Block Diagram ......................................................................................................................................9 2.4 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 12 Report No: DSP25111718-2H MPE Test Report Page 4 of 14 Revision History Revision Issue Date Description Revised By V1.0 2025-12-03 Initial Release Lahm Peng Report No: DSP25111718-2H MPE Test Report Page 5 of 14 1. General Information 1.1 Product Information Product Name: Wireless charge of the mobile power supply Trade Name: - Test Model: 2IHPP1016-BLK-R2 Series Models: 2IHPP1016, 2IHPP1016-PPL-R2, 2IHPP1016-WHT-R2, PW22-1C-5K Rated Voltage: USB-C Input voltage/current: 5V/2.1A USB-C Output Power: 5V/2.1A Wireless Output: 5W Power Adapter: - Battery: DC 3.85V, 5000mAh, 19.25Wh Test Sample No: DSP25111718-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: Wireless charging Output :110.5kHz-205kHz Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Modular Device Report No: DSP25111718-2H MPE Test Report Page 6 of 14 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 5W - TM2 Wireless charging 5W+Charging - Note 1: All modes above have been tested and only the worst modes: TM1, data are represented in the report. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite USB cable 100 Unshielded Without Ferrite - - - - List and Details of Auxiliary Equipment Description Manufacturer Model Serial Number Adapter XIAOMI MDY-14-E…

Text truncated - open the document above for the full version.

Report No: DSP25111718-1E FCC Test Report Page 1 of 27 FCC TEST REPORT FCC ID: 2BPD4-0003 Report No. : DSP25111718-1E Prepared For : Shenzhen GPO Tech CO., LTD Product Name : Wireless charge of the mobile power supply Model Name : 2IHPP1016-BLK-R2 FCC Rule : FCC Part 15 Subpart C Date of Issue : 2025-12-03 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: DSP25111718-1E FCC Test Report Page 2 of 27 Test Report Basic Information Applicant..................................: Shenzhen GPO Tech CO., LTD Address of Applicant...............: 708, Building 3, South Taiyun Chuanggu Tangwei Community, Fenghuang Street Guangming District, Shenzhen China Manufacturer..........................: Huizhou GPO technology Co., Ltd Address of Manufacturer........: F2-5 Building 9, Hanyabei District section, Ganpo Village, Zhenlong town, Huiyang District, Huizhou City Product Name.........................: Wireless charge of the mobile power supply Brand Name.............................: - Main Model..............................: 2IHPP1016-BLK-R2 Series Models..........................: 2IHPP1016, 2IHPP1016-PPL-R2, 2IHPP1016-WHT-R2, PW22-1C-5K Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2025-11-21 to 2025-12-02 Test Result...............................: PASSED Tested Engineer ....................: (Colin Chen) Project Manager......................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: DSP25111718-1E FCC Test Report Page 3 of 27 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 26 6.1 Standard and Limit.............................................................................................................................................. 26 6.2 Test Procedure.................................................................................................................................................... 26 6.3 Test Data and Results ..........................................................…

Text truncated - open the document above for the full version.

Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report Radiated Emission Test View 2 Radiated Emission Test View 3 Report No: DSP25111718-1E FCC ID: 2BPD4-0003 Annex of Test Report Radiated Emission Test View 4