2BPDX-WX005Handgun Safe

Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BPDX-WX005 WX005, WX002, WX005-B We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. iv. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. US-American Point of Contact Applicant/Approval Holder Signature Date: 2026-1-8 Signature Date: 2026-1-8 Company Name: GLOCERTS TECHNOLOGY INC NINGBO ILOCK SECURITY TECHNOLOGY CO..LTD FRN: 0036339737 0037030723 Contact Name: Huiying Fan Jiaxin Huang Address: 19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507 12 Shengxia Road, Beilun District, Ningbo City, Zhejiang Province, China Phone: (626) 588-8039 0574-86823387 Email: [email protected] [email protected]

Page 1 of 3 FCC ID: 2BPDX-WX005 External photos Page 2 of 3 FCC ID: 2BPDX-WX005 Page 3 of 3 FCC ID: 2BPDX-WX005

Label FCC ID:2BPDX-WX005

Page 1 of 6 FCC ID: 2BPDX-WX005 Internal photos Page 2 of 6 FCC ID: 2BPDX-WX005 Page 3 of 6 FCC ID: 2BPDX-WX005 Page 4 of 6 FCC ID: 2BPDX-WX005 Page 5 of 6 FCC ID: 2BPDX-WX005 Phone Coil Page 6 of 6 FCC ID: 2BPDX-WX005

Page 1 of 11 Report No.: AiTSZ-251212028FW2 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : Handgun Safe Brand Name : N/A Model : WX005 Series Model : WX002, WX005-B FCC ID : 2BPDX-WX005 Applicant : NINGBO ILOCK SECURITY TECHNOLOGY CO..LTD Address : 12 Shengxia Road, Beilun District, Ningbo City, Zhejiang Province, China Manufacturer : NINGBO ILOCK SECURITY TECHNOLOGY CO..LTD Address : 12 Shengxia Road, Beilun District, Ningbo City, Zhejiang Province, China Standard(s) : FCC CFR 47 PART 1, § 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Receipt : Dec. 12, 2025 Date of Test : Dec. 12, 2025~ Dec. 18, 2025 Issued Date : Dec. 18, 2025 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 11 Report No.: AiTSZ-251212028FW2 Report Revise Record Report Version Issued Date Notes M0 Dec. 18, 2025 Initial Release Page 3 of 11 Report No.: AiTSZ-251212028FW2 Contents 1 GENERAL INFORMATION .......................................................................................................................................... 4 1.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 4 1.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 1.5 DESCRIPTION OF THE TEST MODE ..................................................................................................................................... 6 1.6 SPECIAL ACCESSORIES ................................................................................................................................................... 6 1.7 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 6 2 TEST CONDITIONS AND RESULTS .............................................................................................................................. 7 2.1 APPLICABLE STANDARD.................................................................................................................................................. 7 2.2 LIMIT ......................................................................................................................................................................... 7 2.3 TEST SETUP ................................................................................................................................................................. 7 2.4 MEASUREMENT PROCEDURE .......................................................................................................................................... 8 2.5 TEST RESULT OF E AND H FIELD STRENGTH ........................................................................................................................ 8 2.6 CONCLUSION ............................................................................................................................................................... 9 3 TEST SETUP PHOTOGRAPHS OF EUT ....................................................................................................................... 10 Page 4 of 11 Report No.: AiTSZ-251212028FW2 1 GENERAL INFORMATION 1.1 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 1.2 General Description of EUT Product Name: Handgun Safe Model/Type reference: WX005 Serial Model: WX002, WX005-B Model difference: All the models are the same, except for the differences in model names and color. Power Supply: Input: DC 12V Output:5W/7.5W/10W/15W Adapter information: Model: SG-120200024AU Input: 100-240V~ 50/60Hz 0.6A Max Output: 12.0V⎓2.0A 24.0W Hardware Version: N/A Software Version: N/A Sample(s) Status: AiTSZ-251212028-1(Normal sample) AiTSZ-251212028-2(Engineer sample) Wireless Charger: Operation frequency: 110KHz - 205KHz Modulation Technology: ASK Antenna Type: Loop coil antenna Antenna gain: 0dBi Remark: The above DUT's information was declared by manufacturer. For more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Page 5 of 11 Report No.: AiTSZ-251212028FW2 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized…

Text truncated - open the document above for the full version.

Page 1 of 29 Report No.: AiTSZ-251212028FW1 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : Handgun Safe Brand Name : N/A Model : WX005 Series Model : WX002, WX005-B FCC ID : 2BPDX-WX005 Applicant : NINGBO ILOCK SECURITY TECHNOLOGY CO..LTD Address : 12 Shengxia Road, Beilun District, Ningbo City, Zhejiang Province, China Manufacturer : NINGBO ILOCK SECURITY TECHNOLOGY CO..LTD Address : 12 Shengxia Road, Beilun District, Ningbo City, Zhejiang Province, China Standard(s) : FCC CFR Title 47 Part 15 Subpart C Date of Receipt : Dec. 12, 2025 Date of Test : Dec. 12, 2025~ Dec. 18, 2025 Issued Date : Dec. 18, 2025 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 29 Report No.: AiTSZ-251212028FW1 Report Revise Record Report Version Issued Date Notes M0 Dec. 18, 2025 Initial Release Page 3 of 29 Report No.: AiTSZ-251212028FW1 Contents 1 TEST SUMMARY ....................................................................................................................................................... 4 1.1 TEST STANDARDS ......................................................................................................................................................... 4 1.2 TEST SUMMARY ........................................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 GENERAL INFORMATION .......................................................................................................................................... 6 2.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3 DESCRIPTION OF THE TEST MODE ..................................................................................................................................... 7 2.4 SPECIAL ACCESSORIES ................................................................................................................................................... 7 2.5 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 8 3 TEST CONDITIONS AND RESULTS .............................................................................................................................. 9 3.1 CONDUCTED EMISSIONS TEST ......................................................................................................................................... 9 3.2 RADIATED EMISSIONS .................................................................................................................................................. 12 3.3 20DB BANDWIDTH ..................................................................................................................................................... 18 3.4 ANTENNA REQUIREMENT ............................................................................................................................................. 19 4 TEST SETUP PHOTOGRAPHS OF EUT ....................................................................................................................... 20 5 PHOTOS OF THE EUT............................................................................................................................................... 21 Page 4 of 29 Report No.: AiTSZ-251212028FW1 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: FCC Rules Part 15.207,15.209, 15.215(c) ANSI C63.10: 2020: American National Standard for Testing Unlicensed Wireless Devices 1.2 Test Summary Test Item Section in 47 CFR Test Result Electric Field Radiated Emissions FCC Part 15 C (Section15.209) PASS 20dB Bandwidth/99% Bandwidth FCC Part 15 C (Section15.215(c)) PASS AC Power Line Conducted Emission FCC Part 15 C (Section15.207) PASS Antenna Requirement FCC Part 15 C (Section15.203 PASS Page 5 of 29 Report No.: AiTSZ-251212028FW1 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized, certified or accredited by the following organizations: FCC-Registration No.: 251906 Designation Number: CN1376 Guangdong Asia Hongke Test Technology Limited has been registered and fully …

Text truncated - open the document above for the full version.

承 认 书 客户名称（CUSTOMER): 品名（DESCRIPTION) : DATE:2024-3-26 REV.NO.:A0 部门 品质 工程 page:1/2 董晚红吕惠韦函满 何伟华韦立红韦立红 SPECIFICATION FOR APPROVAL 客户料号（CUSTOMER P/N）: 规格（SPECIFICATION) ：G43.5 Slot + magnetic coil + small magnetic disc + glue 7MM 确认/日期审核/日期批准/日期(盖公司公章) TEL： 15112254520 FAX：+86-0755-28015170 Manufacturer: Shenzhen Lichengxing Technology Co., Ltd. 宁波友好智能安防科技有限公司(KH254) ADD:4th Floor, No. 365 Xinhu Road, Niuhu Community, Guanlan Subdistrict, Longhua District, Shenzhen 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: ADC HEB 42.5±0.57±20.8±0.052.1MAX3±220.5±0.3 3.WINDING： 1.1底部印字100 STE P TAPE REMAR K N1 4.ELECTRICAL SPECIFICATION: ITEM SPEC 5.BILF OF MATERIAL： NO.SGS NO. 1 2 3 4 5 page:2/2 Loop coil Antenna 0dBi 天线增益Antenna gain: 何伟华韦立红韦立红 TES T CON HRSW ELECTRONICS CO.,LTD Note: 1. Add 20MM small magnetic disc 2. Add back glue Operation frequency: Antenna Type: PART NO TITLE G42.5开槽+磁吸线圈+小磁片+胶 7MM DRAWN BYCHECKED BY APPROVED BY 胶水 黄胶9999 LIANCHENG CO.,LTD 高温胶纸 8mm宽高温胶纸 CUDAK CO.,LTD 无铅锡条无铅锡条 QIAODO 磁片 ⌀42.5*0.8锰锌硬磁片开L槽 TAIYI CO.,LTD ITEMMATERIAL SPECIFICATIONMANUFACTURER 热风线热风线0.08*80股 NANJINGJINNINGCO,LTD 100KHz,0.25V AT 25°C 8.1uH±10% 58mΩ Max 80°C HI-POT 线圈加磁片 S-F常规状态 S-F 热风线⌀0.08*80mm 2UEW 11TS (Ref) LDCR温度 SPECIFICATION FOR APPROVAL START-FINISHWIRE TYPETURNS Antenna gain: 110kHz-205kHz

Page 1 of 1 FCC ID: 2BPDX-WX005