2BPGI-F18Portable anti-theft detector

Shenzhen Yilichuang Electronics Co., LTD Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [March 27, 2026] U.S. Agent Designation [Shenzhen Yilichuang Electronics Co., LTD] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BPGI-F18 Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Shenzhen Yilichuang Electronics Co., LTD]. [Shenzhen Yilichuang Electronics Co., LTD] with the FRN [0037038684] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Yilong Wang] [Huiying Fan] [Manager] [Director] [Shenzhen Yilichuang Electronics Co., LTD] [GLOCERTS TECHNOLOGY INC]

Shenzhen Yilichuang Electronics Co., LTD (March 26, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BPGI-F18 [Shenzhen Yilichuang Electronics Co., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Yilong Wang Shenzhen Yilichuang Electronics Co., LTD (March 26, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BPGI-F18 [Shenzhen Yilichuang Electronics Co., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Yilong Wang

Shenzhen Yilichuang Electronics Co., LTD (March 26, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Portable anti-theft detector / F18 / FCC ID: 2BPGI-F18) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Yilong Wang Title: Manager

Shenzhen Yilichuang Electronics Co., LTD (March 26, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Yilong Wang Title: Manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 Model: F18 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4

FCC ID LABEL: Label Location: FCC ID: 2BPGI-F18 Model No.: F18

Ver. A.1 Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 / 19 EMC TEST REPORT Test item description: Portable anti-theft detector FCC ID: 2BPGI-F18 Trademark(s): N/A Model/Type reference: F18 S/N: / Report No.: CTB26031613501E01 Applicant’s name: Shenzhen Yilichuang Electronics Co., LTD Address: Room 1303, Huaneng Building, Huaqiangbei Sub-district, Futian District, Shenzhen City Manufacturer: Shenzhen Yilichuang Electronics Co., LTD Address: Room 1303, Huaneng Building, Huaqiangbei Sub-district, Futian District, Shenzhen City Prepared by: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Date of Receipt: Mar. 16, 2026 Date of Test(s): Mar. 16, 2026 ~ Mar. 24, 2026 Date of Issue: Mar. 24, 2026 Test Standard(s): CFR47, FCC Part 15 Subpart B, ANSI C63.4: 2014 Test Result: Pass In the configuration tested, the EUT complied with the standards specified above. Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “” indicates the testing items were fulfilled by subcontracted lab. “” indicates the items are not in CNAS accreditation scope. Compiled by: Reviewed by: Approved by: Black cai Bin Mei Rita Xiao Report No.: CTB26031613501E01 Ver. A.1 Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 / 19 Table of Contents 1. Description of version ....................................................................................................................................... 3 2. Test summary ..................................................................................................................................................... 4 3. Measurement uncertainty ................................................................................................................................. 5 4. General information ........................................................................................................................................... 6 4.1. Description of EUT ............................................................................................................................. 6 4.2. Description of accessory device ....................................................................................................... 6 4.3. Test conditions .................................................................................................................................... 6 4.4. Block diagram of EUT configuration ................................................................................................. 6 4.5. Operating condition of EUT ............................................................................................................... 6 5. List of Test and Measurement Instruments .................................................................................................... 7 6. Conducted Emission ......................................................................................................................................... 9 6.1. Limit ................................ ...................................................................................................................... 9 6.2. Test setup ............................................................................................................................................ 9 6.3. EMI test receiver setup ...................................................................................................................... 9 6.4. Test procedure .................................................................................................................................... 9 6.5. Test results .........................................................................................................................................10 7. Radiated emissions ......................................................................................................................................... 12 7.1. Limit .....................................................................................................................................................12 7.2. Test setup ...........................................................................................................................................12 7.3. EMI test receiver setup and spectrum analyzer setup ..................................................................13 7.4. Test procedure ...................................................................................................................................13 7.5. Corrected Amplitude & Margin Calculation .....................................................................................13 7.6. Test results .........................................................................................................................................14 8. Photographs of test setup ................................................................ .............................................................. 18 Report No.: CTB26031613501E01 Ver. A.1 Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 / 19 1. Description of version Report No. Issue Date Description Approved CTB26031613501E01 Mar. 24, 2026 Original Valid Report No.: CTB26031613501E01 Ver. A.1 Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 / 19 2. Test summary Test procedures according to the technical standards: Standard Test Item Test Result §15.107 Conducted Emission PASS §15.109 Radiated Emission PASS Report No.…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: F18 Radiated Emission Below 1G Above 1GHz Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 CE