Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 1 | 15E | 5.18 GHz - 5.24 GHz | 113.00 mW |
| 2 | 15E | 5.26 GHz - 5.32 GHz | 131.00 mW |
| 3 | 15E | 5.50 GHz - 5.72 GHz | 153.00 mW |
| 4 | 15E | 5.75 GHz - 5.83 GHz | 628.00 mW |
| 5 | 15E | 5.84 GHz - 5.88 GHz | 494.00 mW |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesPower output is conducted for U-NII-1, U-NII-2A, U-NII-2C and U-NII-3. Power output is EIRP for U-NII-4. This device supports 20MHz, 40MHz, and 80MHz bandwidth and is MIMO 2x2 transmitter. Modular approval. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module grantee is responsible for providing the documentation to the host integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 8.12 dBi for satisfying RF exposure compliance according to as defined in 2.1091.