FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Shenzhen Sitejiatu Technology Co., LTD/
  3. 2BPRB-ST-X04

2BPRB-ST-X04low-power battery surveillance camera

Shenzhen Sitejiatu Technology Co., LTD
low-power battery surveillance camera - FCC ID 2BPRB-ST-X04 - Shenzhen Sitejiatu Technology Co., LTD
Click to zoom

Application Details

Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Date of Grant
Jun 22, 2026
Application Purpose
Original Equipment
Equipment Note
low-power battery surveillance camera
Frequency Range
2412.00000000 - 2462.00000000
Company
Shenzhen Sitejiatu Technology Co., LTD
Country
China

Documents & Files

Select a file to view

Users Manual

↗

Attestation Statements

↗
↗

Cover Letter(s)

↗
↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗
↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

FCC Caution: This device complies with part �� of the FCC Rules. Operation is subject to the following two conditions: (�) this device may not cause harmful interference, and (�) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible f or compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part �� of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between ��cm the radiator your body: Use only the supplied antenna. English (英语) UBox Quick Start Guide for the App As the app is updated, some modifications may occur. The manual is for reference only. Product Appearance: Product Dimensions: 5.1cm/2.01inch7cm/2.76inch 9.7cm/3.82inch ① Select your country Click Register Now ② Enter your phone number, tap Register, then enter the verification code and set a password. Tap Register to complete the process. ③ After successful registration, enter your account credentials and click Login. II. Register and Log In to Your Account 1、Download and install the app Open the app and register an account using your phone number. Set up a login password. After successful registration, log in using the registered phone number and password. Scan the QR code below, click to download the UBox software, and install it. Please select country CHINA Login No account,Register Now Click to contact customer service Register Login Register Please enter your email Or login with the following account: I read and agree to User Agreement and Privacy Policy Login 1587521**** RememberForgot Password ............. No account,Register Now ① After successful login, click Add Smart Device② Select and install WiFi devices ⑤ Enter your home WiFi network and password to configure the device. Alternatively, tap the bottom-right corner to select Sonic Configuration. (Be sure to select a 2.4GHz Wi-Fi network; do not choose a 5GHz Wi-Fi network.) ⑥ Hold the camera lens about 10 cm away from the QR code displayed on your phone. After hearing the prompt tone, tap “Confirm.” ③ After powering on the camera, press and hold the reset button until you hear the reset confirmation. When you hear “Entering configuration mode,” press the button. ④ Set the camera name, then click Next. III. WiFi Connection Guide (WiFi devices only) No device added, please click the button below to add device. + + No Yes Power on your camera and check that the blue indicator LED is blinking, or hear the voice prompt "The camera is now readyto begin pairing" Discover Devices Next Device My Home Set device info Select Wi-FiAdd device Device information Configuring devices More notesSound wave configuration Wi-Fi network Wi-Fi password Please re-enter your password. This device does not currently support 5GHz WiFi. If your phone is connected to a 5GHz WiFi network, please switch to a 2.4GHz WiFi network. Please increase your phone's volume and maintain a distance of approximately one phone length from the camera. Connect to Wi-Fi Set device info Select Wi-FiAdd device Add device Connecting.. Place the phone with the QR code facing the camera's lens and maintain a distance of 10cm, you will hear a confirmation voice after the security camera scanned successfully ⑦Camera successfully connectedInstalling WiFi Equipment Important Notes Got it Scan QR code setup notes 1. Is the LED flashing blue? If not, please reset the device. 2. WIFI device only supports 2.4G signal. If you are on a 5G signal, please check your router settings and switch to 2.4G. 3. Please check if the WIFI password is correct, and make sure your password will not exceed over 30 characters. 4. Is the device placed too far from the router? Please install closer for better reception. If you need help, you can scan the device's QR code to view the installation video guide or contact customer service 5: If none of the above works. please try to pair to hotspot setup by phone - �� - - �� - - �� - - �� - - �� - White light bulbs Lens Speaker Battery compartment Mounting holes TF memory card Reset button Power button Charging port Infrared Lights*4 photosensitive MIC PIR Motion Sensor LED Indicator Light Click to contact customer serviceClick to contact customer service Or login with the following account: Device list Add a Device DeviceCloud videoCustomer ServiceMe Setup WiFi Device Set up a new device, or relocate an existing device to a new Wi-Fi network. Setup Device list Device Subscription Online Silent modeShareCloud videoContact us + Low-power battery surveillance camera ST-X04 Cloud Services Device Sorting My Friends General Settings Push Settings Link WeChat FAQ Data Protection App Wizard Network Diagnostics System Permissions Account Management About 1587970**** Log Out Important Notes: �, Your device is powered by a rechargeable…

Text truncated - open the document above for the full version.

Attestation Statements

LocalRepresentativeLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(7),oftheCommission’sRules(47C.F.R.)weattestasfollowsfor theproductlistedbelow: FCCIDModelname 2BPRB-ST-X04ST-X04 Weherebyacknowledgeasfollows: i.bothsigneesconfirmthatthepointofcontactacceptsresponsibilitytoactasaUS- AmericanRepresentativeonbehalfoftheapplicant ii.thepointofcontactprovidesthephysicalU.S.addressandemailaslistedbelow iii.bothpartiesmaintaintherequirementsofthisagreementwithoutexpirationdate US-AmericanPointofContactApplicant/ApprovalHolder SignatureSignature CompanyName:LOBOSIOWAINCShenzhenSitejiatuTechnology Co.,LTD FRN:00364139610037076445 ContactName:HarleyLiJunLi Address:4623BittercreekDrColorado SpringsCO80922US Room201,Building1,Longdong CommercialCity,No.6,Dachang Street,LongdongCommunity, BaolongSubdistrict,Longgang District,Shenzhen,China Phone:+18188180538-- Email:[email protected]@qq.com

Attestation Statements

CoveredEquipmentAttestationLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(5)(i)-(ii)oftheCommission’sRules(47C.F.R.)weattestas followsfortheproductlistedbelow: FCCIDModelname 2BPRB-ST-X04ST-X04 We, Applicant CompanyName:ShenzhenSitejiatuTechnologyCo.,LTD Address:Room201,Building1,Longdong CommercialCity,No.6,DachangStreet, LongdongCommunity,BaolongSubdistrict, LonggangDistrict,Shenzhen,China Phone:N/A certifythattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules.Thisincludesthecybersecurityandanti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofistsuccessorsandassignees. Wecertifythat,asofthedateofthefilingoftheapplication,theapplicantisnotidentified ontheCoveredListasanentityproducing“covered”equipment. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, 2026-6-12 SignatureDate PrintedNameofSignee:JunLi Company:ShenzhenSitejiatuTechnology Co.,LTD Phone:13798407018 Email:[email protected] Address:Room601,6thFloor,BuildingC, No.7,EastDistrict,ShangxueIndustrial Park,Bantian,Longgang,Shenzhen,China Fax:N/A

Cover Letter(s)

ShenzhenSitejiatuTechnologyCo.,LTD Date:June22,2026 FederalCommunicationsCommission EquipmentAuthorizationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Attn:OETDept. FCCID:2BPRB-ST-X04 ToWhomItMayConcern: WeherebycertifythatwewillmakedeclarationsofconformityforClassBDigitaldevice peripheral. EnsurethattheproductcomplieswiththerequirementsidentifiedinKDB896810and47CFR2.948(b). Sincerely, Signature PrintedNameofSignee/Title:JunLi/Manager Company:ShenzhenSitejiatuTechnologyCo.,LTD Address:Room201,Building1,LongdongCommercialCity,No.6,DachangStreet,Longdong Community,BaolongSubdistrict,LonggangDistrict,Shenzhen,China

Cover Letter(s)

ConfidentialityRequestLetter ForCertificationServiceintheUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)andSection §552(b)(4)oftheFreedomofInformationAct,werequestconfidentialityforthe documentationofthefollowingproducts: FCCIDModelname 2BPRB-ST-X04ST-X04 Fortheproductslistedabove,werequestpermanentconfidentialityforallapplicable exhibitsasthereare:  theOperationalDescription  theBlockDiagram theSchematics Theabovelistedexhibitscontaintradesecretsandproprietaryinformationthatcouldbeof benefittoourcompetitors. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, 2026-6-12 SignatureDate PrintedNameofSignee/Title:JunLi/Manager Company:ShenzhenSitejiatuTechnologyCo.,LTD Address:Room201,Building1,LongdongCommercialCity,No.6, DachangStreet,LongdongCommunity,Baolong Subdistrict,LonggangDistrict,Shenzhen,China Phone:13798407018 Fax:-- Email:[email protected]

External Photos

ReportNo.:CISRR26051410401 Page 53 of 56 9.EXTERNALANDINTERNALPHOTOS 9.1.ExternalPhotos ReportNo.:CISRR26051410401 Page 54 of 56

ID Label/Location Info

Label Size:25mm*8mm Productname:Low-powerbatterysurveillancecamera ModelName:ST-X04 FCCID:2BPRB-ST-X04 LabelLocation

Internal Photos

ReportNo.:CISRR26051410401 Page 55 of 56 9.2.InternalPhotos FPCAntenna ReportNo.:CISRR26051410401 Page 56 of 56 ------Endofthereport-----

RF Exposure Info

ReportNo.: CISRR26051410402 Reporttemplateversion:CISE-TR-001-A0Page:1of6 TESTREPORT RFExposureEvaluation ReportNo.: CISRR26051410402 ProjectNo.: CISR260514104 FCCID:2BPRB-ST-X04 Applicant:ShenzhenSitejiatuTechnologyCo.,LTD Address: Room201,Building1,LongdongCommercialCity,No.6,DachangStreet, LongdongCommunity,BaolongSubdistrict,LonggangDistrict, Shenzhen,China Manufacturer: ShenzhenSitejiatuTechnologyCo.,LTD Address: Room201,Building1,LongdongCommercialCity,No.6,DachangStreet, LongdongCommunity,BaolongSubdistrict,LonggangDistrict, Shenzhen,China ProductName: Low-powerbatterysurveillancecamera TradeMark: - Model/Typereference: ST-X04 ListedModel(s):- Standard:47CFRPart2.1091 Issuedate:May26,2026 Testresult:Complied Reviewedby:MorganTan Approvedby:HansHu Thetestresultsrelateonlytothetestedsamples. ThetestreportshouldnotbereproducedexceptinfullwithoutthewrittenapprovalofShenzhenBangceTesting TechnologyCo.,Ltd. ReportNo.: CISRR26051410402 Reporttemplateversion:CISE-TR-001-A0Page:2of6 1.APPLICABLESTANDARD 47CFRPart2.1091:Radiofrequencyradiationexposureevaluation:mobiledevices ANSIC95.1–3999:IEEEStandardforSafetyLevelswithRespecttoHumanExposuretoRadioFrequency ElectromagneticFields,3kHzto300GHz. FCCKDBpublication447498D01GeneralRFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. 47CFRPart1.1307:Actionsthatmayhaveasignificantenvironmentaleffect,forwhichEnvironmental Assessments(EAs)mustbeprepared. 47CFRPart1.1310:Radiofrequencyradiationexposurelimits. 2.REPORTVERSION VersionNo.IssuedateDescription 00May26,2026Original ReportNo.: CISRR26051410402 Reporttemplateversion:CISE-TR-001-A0Page:3of6 3.RADIOSPECIFICATIONDESCRIPTION WIFI-2.4GHzBand Supportedtype:802.11b802.11g802.11n 802.11ax Note:PleaserefertoRFreportfordetailedtechnicalspecifications 4.SIMULTANEOUSTRANSMISSIONANALYSIS ThesedevicesuseasingletransmittermoduleandantennaforbothWLAN.WLANcannottransmit simultaneously. ReportNo.: CISRR26051410402 Reporttemplateversion:CISE-TR-001-A0Page:4of6 5.TESTRESULT 5.1.SARtestexclusionEvaluation ExclusionLimit: KDB447498D01v06,Clause4.3.1b) 100MHzto1500MHz {[Powerallowedatnumericthresholdfor50mminstepa)]+[(testseparation distance–50mm)·(f(MHz)/150)]}mW 1500MHzand≤6GHz {[Powerallowedatnumericthresholdfor50mminstepa)]+[(testseparation distance–50mm)·10]}mW Result: Passed TestData Radiotype Frequency (GHz) Maximum output power #1 (dBm) Antenna gain #2 (dBi) Maximum EIRP #3 (dBm) Maximum tune-upEIRP #4 (dBm) Minimum distance #5 (mm) Exclusion Limit (dBm) Result WIFI2.4G2.46213.12.2115.311620032.03PASS Note #1:ThisvaluecomesfromtheRFtestreport. #2:Thisvalueisdeclaredbytheapplicant. #3:EIRP=Maximumoutputpower+Antennagain. #4:Thisvalueisdeclaredbytheapplicant. #5:Thisvalueisdeclaredbytheapplicant. ReportNo.: CISRR26051410402 Reporttemplateversion:CISE-TR-001-A0Page:5of6 5.2.Standalonetransmission Limit: Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironment impactofhumanexposuretoradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency range(MHz) Electricfield strength(V/m) Magneticfield strength (A/m) Powerdensity (mW/cm 2 ) Averaging time(minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f *(900/f 2 ) 6 30–30061.40.1631.06 300–1500--f/3006 1500–100,000--56 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f *(180/f 2 ) 30 30–30027.50.0730.230 300–1500--f/150030 1500–100,000--1.030 Evaluationmethod: Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW, G=gainofantennainlinearscale,Pi=3.1416, R=distancebetweenobservationpointandcenteroftheradiatorincm Result:Passed TestData Radiotype Maximum outputpower (dBm) #1 Maximum tune-uppower (dBm) Antenna gain(dBi) #2 Minimun distance(cm) #3 Pd (mW/cm 2 ) Limit (mW/cm 2 ) Result WIFI2.4G13.114.002.2120.000.00831.00PASS Note #1:ThisvaluecomesfromtheRFtestreport. #2:Thisvalueisdeclaredbytheapplicant. ReportNo.: CISRR26051410402 Reporttemplateversion:CISE-TR-001-A0Page:6of6 5.3.Simultaneoustransmission Limit: KDB447498D01v06,Clause4.3.2,47CFRPart1.1307 InthecaseofxedRFsourcesoperatinginthesametime-averagingperiod,orof multiplemobileorportableRFsourceswithinadeviceoperatinginthesametime averagingperiod,ifthesumofthefractionalcontributionstotheapplicablethresholds islessthanorequalto1asindicatedinthefollowingequation. Where a=numberoffxed,mobile,orportableRFsourcesclaimingexemptionusingparagraph (b)(3)(i)(B)ofthissectionforP,includingexistingexempttransmittersandthosebeing added. b=numberoffxed,mobile,orportableRFsourcesclaimingexemptionusingparagraph (b)(3)(i)(C)ofthissectionforThresholdERP,includingexistingexempttransmittersand thosebeingadded. c=numberofexistingfixed,mobile,orportableRFsourceswithknownevaluationforthespeci edminimumdistanceincludingexistingevaluatedtransmitters. P j =theavailablemaximumtime-averagedpowerortheERP,whicheverisgreater,forxed, mobile,orportableRFsourceiatadistancebetween0.5cmand40cm(inclusive). P th,j =theexemptionthresholdpower(P)accordingtoparagraph(b)(3)(i)(B)ofthissectionfor xed,mobile,orportableRFsourcei. ERP j =theERPoffixed,mobile,orportableRFsourcej. ERP th,j =exemptionthresholdERPforfixed,mobile,orportableRFsourcej,atadistanceofat leastλ/2πaccordingtotheapplicableformulaofparagraph(b)(3)(i)(C)ofthissection. Evaluated k =themaximumreportedSARorMPEoffixed,mobile,orportableRFsourcekeither inthedeviceoratthetransmittersitefromanexistingevaluationatthelocationofexposure. ExposureLimit k =eitherthegeneralpopulation/uncontrolledmaximumpermissibleexposure (MPE)orspecicabsorptionrate(SAR)limitforeachxed,mobile,orportableRFsourcek, asapplicablefrom§1.1310ofthischapter. Result:NotApplicable --------EndofReport--------

Test Report

YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. customername: CustomerModel: CustomerID: CustomerSpecification Description:Yuanchua- ngxingMaterialNumber: YuanChuangxingSpecificationDescrip- tion: specification Approval,Signature,Seal Source:ChuangxingStarConfirmationCustomerConfirmation SamplePreparationExamineandverifyRatifyTestandverifyExamineandverifyRatify Zouyc YuanChuangxingsignedandstampedthedocument.Customersignsandstampsthedocument Date 2026-03-11 Date 2026-03-11 Stetjatu YCX08N-2139-60B Built-in2.4GFPCantenna,black,1.13mmdiameter,60mmlength,withterminals 2.4GFPCantenna YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD DocumentCreation/revision/RepealHistoryTable EditionDateProduction/RevisionContentCreateApprovalRemarks A1 2026.03.11 Zouyc YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. 3、Catalogue 1、Cover ................................................1 2、DocumentCreation/revision/RepealHistoryTable .............2 3、catalogue ..............................................3 4、productdrawing ........................................4 5、Nonesourceperformancetestparameters...........5 6、2D,3DPerformanceChart ................................7 7、ElectricalPerformanceTestReport.........................7 8、ReliabilityTestReport ...................................8 8 NO. PARTOR IDENTIFYINGNO. 6 7 ORDESCRIPTION NOMENCLATURE 45 MA TERIAL ASDIMENSION A B TOLERANCE C D 7 6 5 4 2 3 CADFILE: SCALE:1:1 1 3 21 A B C D QTY PARTNO.: DWGTYPE: UNIT .XXX ±0.05 .XX ±0.1 .X ±0.2 X. ±0.25 XX.±1 XXX.±2 CHANGEDESCRIPTION SIGNATURE DATE REV. PRODUCTDRAWING UNIT mm DRAWEDBY CHECKEDBY APPROVEDBY zyc Mike Sky YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. www.yuanchuangxing.cn www.yuanchuangxing.cn A1 New 2023.09.25 zyc Technicalrequirements: 1.Electricalparameters: 1.1Impedance 1.2Frequency 1.3VSWR 1.4PeakGain 1.5Polarization :50Ω :2400-2500MHz :<2.0 :2dBi :Linear 1.6RadiationPatten:Omnidirectional 2.Mechanicalproperties: 2.1StorageTemperatureRange:-40TO+85°C 2.2OperatingTemperatureRange:-40TO+85°C 3.AllmaterialmustmeetROHSrequest 4.Mark()asthekeycontroldimensions FPC wire stock terminal black 113.Black Golden1.13terminal YCX08N-2139-60B TITLE:Built-in2.4GFPCAnte- nna,Black,1.13mmwire length,60mm,withterminals 4、ProductDrawing YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. 1 1 1 1 60±3 40±0.2 7 . 5 ± 0 . 2 YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. 5、NoneSourcePerformanceTestParameters Frequency(GHz) 2.42.452.5 VSWR 1.13 1.22 1.36 5.15 / 5.55 / 5.85 / YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. 6、2Dand3DPerformanceChart PassiveTestForWiFi Freq (MHz) Effi (%) Gain (dBi) 2400 60 2.01 2450 61 2.11 2500 60 2.21 YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. 7、ElectricalPerformanceParameters ElectricalParameters Frequencyrange 2.4GHz-2.5GHz Inputimpedence50Ω Standingwaveratio <2.0 Gain 2dBi PolarizationMethodVerticalpolarization RadiationdirectionOmnidirectional ConnectionMethod IPEX MechanicalParameter Linelength Maintenanceenergy Coax SaltSprayTest Enviromentalparameter Workingtemperature -40~85°C YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. 8、ReliabilityTestReport 8.1.SteadyTemperatureDampTest Test/TestItem SteadytemperaturedamptestInspectionOrderNumber ProductName/Specification WIFI2.4Gantenna Numberoftrials:5PCS Dateofsubmission:2026-03-10 CompletionDate:2026-03-11 Testing/inspectionequipment: 1.Programmableconstanttemperatureandhumiditylaboratorychamber 2.8753ESNetworkAnalyzer Test/InspectionConditions: 1.Testconductedataconstanttemperatureof-40°Cfor12hours 2.Testconductedat+85°65°Cand70%relativehumidityfor12hours,totaling24hours; Endoftest Requirement: 1、Themetalsurfaceshallbefreefromcracks,wrinkles,separation,etc.;non-metalliccomponentsshallnotexhibitdiscoloration,cracking, deformation,delamination,orotherdefects. 2、Theelectricaltestmeetsthestandardrequirements;thevoltagestandingwaveratiotestpassed. Test/InspectionConclusion:  Qualified  Unqualified  Donotmakeajudgment Test:LiChunqiangReview:WangChunjiang YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. 8.2HighandLowTemperatureThermalShock Test/TestItem HighandlowtemperaturethermalshockInspectionOrderNumber ProductName/Specification WIFI2.4Gantenna Numberoftrials:5PCS Dateofsubmission:2026-03-10 CompletionDate:2026-03-11 Testing/inspectionequipment: 1.HighandLowTemperatureAlternatingHumidHeatChamber 2.8753ESNetworkAnalyzer Test/InspectionConditions: -30°C(2hours)---followedby80°C(2hours)intervals,repeated6timesforatotalof24hours; Endoftest Requirement: 3、Themetalsurfacecoatingshallbefreefrompeeling,cracking,wrinkling,orseparation;non-metallic areasshallnotexhibitdiscoloration,cracking,deformation,adhesionfailure,orotherdefects. 4、Theelectricaltestscomplywiththestandards;thevoltagestandingwaveratiotestpassed. Test/InspectionConclusion:  Qualified  Unqualified  Donotmakeajudgment Test:LiChunqiangReview:WangChunjiang YuanchuangxingElectronics(Shenzhen)Co.,Ltd. Yuanchuangxingelectronics(Shenzhen)CO.,LTD. SpecificationsforTestingSamplesofStructuralComponents Theinspectionresultsforstructuralcomponentsamplesshallincludethefollowing: ClassSpecificationItemClassSpecificationItem ①Appe- arance& Specifica- tions Kerchikovtest 1、Examinethesurfaceforthepresenceofwater stains,airpockets,shrinkage,whitening,scratch- es,impacts,materialimperfections,oroilstains. ③Reli- ability Perfor- mance Test 1、Storagetemperaturerange 2、Checkcorners,adhesivepillars,limitpositions, holeopenings,windowgrids,andslotpositionsfor issuessuchasunevencoatingpeaks,misaligned adhesiveapplication,brokenpillars,chippededges, flattenedwateroutlets,orbrittlematerials. 2、operatingtemper…

Text truncated - open the document above for the full version.

Test Report

ReportNo.:CISRR26051410401 Thetestresultsrelateonlytothetestedsamples. ThetestreportshouldnotbereproducedexceptinfullwithoutthewrittenapprovalofShenzhenBangce TestingTechnologyCo.,Ltd. Page1of49 TESTREPORT ReportNo.CISRR26051410401 ProjectNo.CISR260514104 FCCID2BPRB-ST-X04 ApplicantShenzhenSitejiatuTechnologyCo.,LTD Address Room201,Building1,LongdongCommercialCity,No.6,Dachang Street,LongdongCommunity,BaolongSubdistrict,LonggangDistrict, Shenzhen,China ManufacturerShenzhenSitejiatuTechnologyCo.,LTD Address Room201,Building1,LongdongCommercialCity,No.6,Dachang Street,LongdongCommunity,BaolongSubdistrict,LonggangDistrict, Shenzhen,China ProductNameLow-powerbatterysurveillancecamera Trademark- Model/TypereferenceST-X04 ListedModel(s)- Standard 47CFRPart15.247 DateofsamplereceiptMay20,2026 TestdateMay20,2026toMay26,2026 IssuedateMay26,2026 TestresultComplied Reviewedby:MorganTan Approvedby:HansHu ReportNo.:CISRR26051410401 Page 2 of 49 Contents 1.STANDARDANDAPPLICABLETESTMETHODS........................................................................................3 2.REPORTVERSION..........................................................................................................................................3 3.TESTDESCRIPTION.......................................................................................................................................4 4.SUMMARY........................................................................................................................................................5 4.1.ProductDescription*..................................................................................................................................5 4.2.RadioSpecificationDescription*..............................................................................................................5 4.3.ModificationofEUT.....................................................................................................................................5 4.4.Deviationfromstandards...........................................................................................................................6 4.5.TestingSite...................................................................................................................................................6 5.TESTCONFIGURATION.................................................................................................................................7 5.1.Testfrequencylist.......................................................................................................................................7 5.2.Descriptionsoftestmode...........................................................................................................................7 5.3.Supportunitusedintestconfiguration....................................................................................................7 5.4.Testsampleinformation.............................................................................................................................7 5.5.Environmentalconditions...........................................................................................................................7 5.6.Statementofthemeasurementuncertainty.............................................................................................8 5.7.EquipmentUsedduringtheTest................................................................................................................9 6.TESTRESULTS.............................................................................................................................................11 6.1.EvaluationResults(Evaluation)...............................................................................................................11 6.1.1.AntennaRequirement.............................................................................................................................11 6.2.RadioSpectrumMatterTestResults(RF)...............................................................................................12 6.2.1.ConductedEmissionatACpowerline.................................................................................................12 6.2.2.6dBBandwidth........................................................................................................................................15 6.2.3.MaximumConductedOutputPower.....................................................................................................16 6.2.4.PowerSpectralDensity..........................................................................................................................17 6.2.5.Conductedbandedgeandspuriousemission...................................................................................18 6.2.6.Radiatedbandedgeemission...............................................................................................................19 6.2.7.RadiatedSpuriousEmission(below1GHz).........................................................................................25 6.2.8.RadiatedSpuriousEmission(Above1GHz)........................................................................................29 7.APPENDIXREPORT......................................................................................................................................37 7.1.ConductedOutputPower.........................................................................................................................37 7.2.PowerSpectralDensity.............................................................................................................................39 7.3.6dBBandwidth...........................................................................................................................................41 7.4.DutyCycle..................................................................................................................................................43 7.5.Conducte…

Text truncated - open the document above for the full version.

Test Setup Photos

ReportNo.:CISRR26051410401 Page 51 of 56 8.TESTSETUPPHOTOS ConductedEmissionatACpowerline Radiatedbandedgeemission RadiatedSpuriousEmission(Above1GHz) ReportNo.:CISRR26051410401 Page 52 of 56 RadiatedSpuriousEmission(below1GHz)

Contact Information

Applicant

Jun Li
[email protected]Fax: N/A

Technical Contact

LOBOS IOWA INCHarley Li
[email protected]

4623 Bittercreek Dr Colorado Springs CO 80922 · United States

Test Firm

Shenzhen Bangce Testing Technology Co. , Ltd.Hans Hu
[email protected]

Technical Specifications

#Rule PartsFrequency RangePower Output
115C2.41 GHz - 2.46 GHz2.04 mW
Confidentiality
Long Term
Grant Notes
Power listed is maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This device only supports 20MHz bandwidth mode.