2BPRC-A1Camera Bluetooth Remote

ShenzhenhaiguodaTechnologyCo.,Ltd. Address：3/F,Building5,LongbiIndustrialZoneBantian,LonggangDistrict, ShenZhen,Guangdong,China Date:2026-06-15 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2BPRC-A1 FRN:0037076452. (“ShenzhenhaiguodaTechnologyCo.,Ltd.”)certifiesthat,asofthedateofthefilingofthe application,CELLTINC.isourdesignatedU.S.agentforserviceofprocessfortheabove referencedFCCID.(“ShenzhenhaiguodaTechnologyCo.,Ltd.”)acceptstomaintainan agentfornolessthanoneyearafterthegranteehasterminatedallmarketingandimportation ortheconclusionofanyCommission-relatedproceedinginvolvingtheequipment. CELLTINC.accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:CELLTINC. Address:140121STST#12958SACRAMENTO,CA95811UnitedStates FRN：0036412567 ContactPerson:ThompsonLim Tel.:(424)347-4188 Email:[email protected] Sincerely, SignedonbehalfofShenzhenhaiguoda TechnologyCo.,Ltd. SignedonbehalfofCELLTINC. Name:HuiXiongName:ThompsonLim Title:ManagerTitle:GeneralManager Date:2026-06-15Date:2026-06-15

Rev1/26/2023 ShenzhenhaiguodaTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:06-11-2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BPRC-A1 (“ShenzhenhaiguodaTechnologyCo.,Ltd.”)certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. (“ShenzhenhaiguodaTechnologyCo.,Ltd.”)certifiesthattheequipmentforwhichauthorizationis soughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc. oranyofitssuccessorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyof itssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB 986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature)HuiXiong (Applicantprintedname) Rev1/26/2023 ShenzhenhaiguodaTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:06-11-2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BPRC-A1 (“ShenzhenhaiguodaTechnologyCo.,Ltd.”)certifiesthat,asofthedateofthefilingoftheapplication, ShenzhenhaiguodaTechnologyCo.,Ltd.isnotidentifiedontheCoveredList(asaspecificallynamed entityoranyofitssubsidiariesoraffiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)HuiXiong

ShenzhenhaiguodaTechnologyCo.,Ltd. Date ： 06-11-2026 Product/ModelNumber:CameraBluetoothRemote/A1,A2,A3 FCCID:2BPRC-A1 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By:HuiXiong ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:86-15214328170 Onbehalfof:ShenzhenhaiguodaTechnologyCo.,Ltd.

ShenzhenhaiguodaTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:June11,2026 Subject;RequestforConfidentiality FCCID:2BPRC-A1 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:HuiXiong Title:Manager

ShenzhenHaiguodaTechnologyCo.,Ltd. ProductSimilarityDeclaration Productname:CameraBluetoothRemote Modelname:A1,A2,A3 FCCID:2BPRC-A1 We(ShenzhenHaiguodaTechnologyCo.,Ltd.)herebystatethatallthe modelsareelectricalidenticalincludingthesamesoftware parameterandhardwaredesign(i.e.,circuitdesign,PCBLayout, RFmodule/circuit,antennatype(s)andantennalocation, componentsonPCB,etc.,),samemechanicalstructureand design(includingproductenclosure,materials,etc.,),theonly differencearemodelnameandcolor. Signature: Name:HuiXiong Title:Manager Place,date:SHENZHEN,2026.6.11

Label: CameraBluetoothRemote Model:A1 FCCID:2BPRC-A1 25mm 18mm

FCCID:2BPRC-A1 RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1093， UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone 1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposure conditions,bymeasurementornumericalsimulation,isnotrequiredwhenthe correspondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f (GHz) ]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f (GHz) istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Here, SoaSARtestisnotrequired ModeFreque ncy (MHz) Max Power (dBm) Target power W/ tolerance (dBm) Maxtune uppower tolerance (dBm) Max Power (mW) Min. Distanc e (mm) Calc. threshol ds limit GFSK 2402-0.17 0±1 11.25895.000.39023.0 2440-0.67 0.5±1 1.51.41255.000.44133.0 2480-1.49 -1.5±1 -0.50.89135.000.28073.0

深圳市和鸣微科技有限公司 Shenzhen HamyWe Technology Co., Ltd. HM3216ANT24HS-HML2_V1.0 Page1 of 8 SPECIFICATION Ceramic Antenna 3216 Size 2400-2500 MHz P/N: HM3216ANT24HS-HML2 HM3216ANT24HS-HML2_V1.0 1. Frequency 2400-2500 MHz 2. Applications For Miniaturized BluetoothSystem 3. Dimensions (Unit : mm) 1). Over View : 2). PCB Layout (Unit : mm) 深圳市和鸣微科技有限公司 Shenzhen HamyWe For Miniaturized Bluetooth System mm) (Unit :mm) : 深圳市和鸣微科技有限公司 Technology Co., Ltd. Page2 of 8 mm) ` 深圳市和鸣微科技有限公司 Shenzhen HamyWe Technology Co., Ltd. HM3216ANT24HS-HML2_V1.0 Page3 of 8 4. Evaluation Board Size and Matching Circuits 5. Electrical Characteristics Part Number HM3216ANT24HS-HML2 Central Frequency 2450 MHz Bandwidth 100(typ.) MHz V.S.W.R ≤2.0 Peak Gain 4.11 dBi Impedance 50 Ohm Polarization Linear Azimuth Beamwidth Omni-directional 5.6 nH 0.8 pF 深圳市和鸣微科技有限公司 Shenzhen HamyWe Technology Co., Ltd. HM3216ANT24HS-HML2_V1.0 Page4 of 8 6. Return Loss (S11) 7. Radiation Pattern & Efficiency Frequency (MHz) 2400 2450 2500 Efficiency (dB) -2.08 -1.94 -2.15 Efficiency (%) 62 64 61 Gain (dBi) 3.43 4.11 3.67 深圳市和鸣微科技有限公司 Shenzhen HamyWe Technology Co., Ltd. HM3216ANT24HS-HML2_V1.0 Page5 of 8 8. Reflow Soldering Standard Condition 9. Packaging and Dimensions
Plastic Tape ` HM3216ANT24HS-HML2_V1.0
Remarks for Package Reserve a length of 150~200mm for the trailer of the carrier and 250~300 mm for the leader of the carrier and further 250mm of cover tape at the leading part of the carrier.
Reel (5000 pcs/Reel)
Storage Period Oxidizable Material, 12 months in vacuum sealed bag, please repack within 168 hours by re-seal the package treatment after using. Storage Temperature Range :<30degree C, Humidity:<60%RH 深圳市和鸣微科技有限公司 Shenzhen HamyWe Reserve a length of 150~200mm for the trailer of the carrier and 250~300 mm for the leader of the carrier and further 250mm of cover tape at the leading part of the Oxidizable Material, 12 months in vacuum sealed bag, please repack within 168 seal the package treatment after using. Storage Temperature Range : <30 degree C, Humidity : <60%RH 深圳市和鸣微科技有限公司 Technology Co., Ltd. Page6 of 8 Reserve a length of 150~200mm for the trailer of the carrier and 250~300 mm for the leader of the carrier and further 250mm of cover tape at the leading part of the Oxidizable Material, 12 months in vacuum sealed bag, please repack within 168 深圳市和鸣微科技有限公司 Shenzhen HamyWe Technology Co., Ltd. HM3216ANT24HS-HML2_V1.0 Page7 of 8 10. Dependability Test Test item Test condition / Test method Specification Solderability IEC 60068-2-58 GB/T2423.28 *Solder bath temperature：240±5°C *Immersion time：2±0.5 sec Solder：Sn96.5Ag3.0Gu0.5 for lead-free. At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) JIS C5101 *Solder bath temperature：260±5°C *Leaching immersion time：10±1 sec Solder : Sn96.5 Ag3.0 Gu0.5 for lead-free. Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat IEC 60068-2-58 GB/T2423.28 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：260±5°C *Immersion time：10±1 sec Solder：Sn96.5Ag3.0Gu0.5 for lead-free Measurement to be made after keeping at room temperature for 24±2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test IEC 60068-2-32 GB/T2423.8 Customer’s specification. *Height：50 cm *Test Surface: Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Vibration IEC 60068-2-6 GB/T 2423.10 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Adhesive Strength of Termination IEC60068-2-21 GB/T 2423.6 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time:10±1 sec No remarkable damage or removal of the termination. 深圳市和鸣微科技有限公司 Shenzhen HamyWe Technology Co., Ltd. HM3216ANT24HS-HML2_V1.0 Page8 of 8 Bending test IEC 60068-2-21 GB/T 2423.29 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 2mm and then pressure shall be maintained for 10±1 sec. Measurement to be made after keeping at room temperature for 24±2 hours. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Temperature cycle IEC60068-2-14 GB/T 2423.22 30 minutes at-40°C±2°C. 10~15 minutes at room temperature. 30minutes at +85°C±2°C. 10~15 minutes at room temperature. Total 100 continuous cycles Measurement to be made after keeping at room temperature for 24±2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. High temperature IEC 60068-2-2 GB/T2423.2 *Temperature：85±2°C. *Test duration：500+24/-0 hours. Measurement to be made after keeping at room temperature for 24±2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics. Humidity (steady conditions) IEC60068-2-3 GB/T 2423.3 *Humidity：85±5%R.H. *Temperature：85±2°C. *Time：500+24/-0 hrs. Measurement to be made after keeping at room temperature for 24±2 hrs ※ 200hrs measuring the first data then 300hrs data. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Low temperature IEC 60068-2-1 GB/T2423.1 *Temperature：-40±2°C. *Test duration：500+24/-0 hours Measurement to be made after keeping at room temperature for 24±2 hrs. No mechanic…

Text truncated - open the document above for the full version.

ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page1of23 RFTestData FCCID:2BPRC-A1 DutyCycle.....................................................................................................................................................................2 MaximumPeakConductedOutputPower....................................................................................................................5 -6dBBandwidth.............................................................................................................................................................8 OccupiedChannelBandwidth.....................................................................................................................................11 MaximumPowerSpectralDensityLevel.....................................................................................................................14 BandEdge..................................................................................................................................................................17 ConductedRFSpuriousEmission..............................................................................................................................20 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page2of23 DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTBLE1M2402Ant116.477.839.71 NVNTBLE1M2440Ant116.47.859.76 NVNTBLE1M2480Ant115.448.1110.36 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page3of23 DutyCycleNVNTBLE1M2402MHzAnt1 DutyCycleNVNTBLE1M2440MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page4of23 DutyCycleNVNTBLE1M2480MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page5of23 MaximumPeakConductedOutputPower ConditionModeFrequency (MHz) AntennaConducted Power (dBm) Conducted Power(W) Limit Conducted(dBm) Verdict NVNTBLE 1M 2402Ant1-0.170.0009630Pass NVNTBLE 1M 2440Ant1-0.670.0008630Pass NVNTBLE 1M 2480Ant1-1.490.0007130Pass ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page6of23 PeakPowerNVNTBLE1M2402MHzAnt1 PeakPowerNVNTBLE1M2440MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page7of23 PeakPowerNVNTBLE1M2480MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page8of23 -6dBBandwidth ConditionModeFrequency (MHz) Antenna-6dBBandwidth (MHz) Limit-6dBBandwidth (MHz) Verdict NVNTBLE 1M 2402Ant10.6890.5Pass NVNTBLE 1M 2440Ant10.71480.5Pass NVNTBLE 1M 2480Ant10.69280.5Pass ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page9of23 -6dBBandwidthNVNTBLE1M2402MHzAnt1 -6dBBandwidthNVNTBLE1M2440MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page10of23 -6dBBandwidthNVNTBLE1M2480MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page11of23 OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTBLE1M2402Ant11.2021 NVNTBLE1M2440Ant11.2497 NVNTBLE1M2480Ant11.2432 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page12of23 OBWNVNTBLE1M2402MHzAnt1 OBWNVNTBLE1M2440MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page13of23 OBWNVNTBLE1M2480MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page14of23 MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNTBLE1M2402Ant1-17.818Pass NVNTBLE1M2440Ant1-18.358Pass NVNTBLE1M2480Ant1-19.138Pass ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page15of23 PSDNVNTBLE1M2402MHzAnt1 PSDNVNTBLE1M2440MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page16of23 PSDNVNTBLE1M2480MHzAnt1 ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page17of23 BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-48.53-20Pass NVNTBLE1M2480Ant1-53.2-20Pass ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page18of23 BandEdgeNVNTBLE1M2402MHzAnt1Ref BandEdgeNVNTBLE1M2402MHzAnt1Emission ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page19of23 BandEdgeNVNTBLE1M2480MHzAnt1Ref BandEdgeNVNTBLE1M2480MHzAnt1Emission ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page20of23 ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-39.1-20Pass NVNTBLE1M2440Ant1-35.09-20Pass NVNTBLE1M2480Ant1-42.7-20Pass ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page21of23 Tx.SpuriousNVNTBLE1M2402MHzAnt1Ref Tx.SpuriousNVNTBLE1M2402MHzAnt1Emission ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page22of23 Tx.SpuriousNVNTBLE1M2440MHzAnt1Ref Tx.SpuriousNVNTBLE1M2440MHzAnt1Emission ReportNo.:SZNTT26018499E1-1 SZNTT-TR728-0Page23of23 Tx.SpuriousNVNTBLE1M2480MHzAnt1Ref Tx.SpuriousNVNTBLE1M2480MHzAnt1Emission

SZNTT-TR828-0Page 1 of 34 Hotline: 0755-27889935http://www.ntt-testing.com FCC TEST REPORT FCC ID:2BPRC-A1 Product: Camera Bluetooth Remote Model Name : A1, A2, A3 Brand: N/A Report No. : SZNTT26018499E1-1 Prepared for Shenzhen haiguoda Technology Co., Ltd. 3/F, Building 5, Longbi Industrial Zone Bantian, Longgang District, ShenZhen,Guangdong, China Prepared by Shenzhen NTT Testing Technology Co., Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district,Bao 'an District, Shenzhen City, China TEL: 0755-27889935 Report No.: SZNTT26018499E1-1 SZNTT-TR828-0Page 2 of 34 Hotline: 0755-27889935http://www.ntt-testing.com 1 TEST RESULT CERTIFICATION Applicant’s name: Shenzhen haiguoda Technology Co., Ltd Address: 3/F, Building 5, Longbi Industrial Zone Bantian, Longgang District, ShenZhen,Guangdong, China Manufacture's name : Shenzhen haiguoda Technology Co., Ltd Address: 3/F, Building 5, Longbi Industrial Zone Bantian, Longgang District, ShenZhen,Guangdong, China Product name: Camera Bluetooth Remote Model name: A1 Additional model: A2, A3 Standards: FCC CFR47 Part 15 Section 15.247 Test procedure: ANSI C63.10-2020+Cor.1-2023 KDB 558074 D01 15.247 Meas Guidance v05r02 Test Date: May. 11, 2026 to May 22, 2026 Date of Issue: May 22, 2026 Test Result: Pass This device described above has been tested by NTT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. Andit is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTT, this document may be altered or revised by NTT, personal only, and shall be notedin the revision of the document. Prepared by(Test Engineer): Cindy Qin Reviewer(Supervisor): Ken Wu Approved(Manager): Abel Yu Report No.: SZNTT26018499E1-1 SZNTT-TR828-0Page 3 of 34 Hotline: 0755-27889935http://www.ntt-testing.com Contents Page 1 TEST RESULT CERTIFICATION.................................................................................................................2 2 TEST SUMMARY..........................................................................................................................................5 3 TEST FACILITY............................................................................................................................................6 4 GENERAL INFORMATION...........................................................................................................................7 4.1 G ENERALDESCRIPTION OFE.U.T.........................................................................................................7 4.2 C HANNELLIST.....................................................................................................................................8 4.3 T ESTSETUPCONFIGURATION.............................................................................................................. 9 4.4 T ESTMODE.........................................................................................................................................9 5 EQUIPMENT DURING TEST......................................................................................................................10 5.1 E QUIPMENTSLIST..............................................................................................................................10 5.2 M EASUREMENTUNCERTAINTY............................................................................................................12 5.3 D ESCRIPTION OFSUPPORTUNITS...................................................................................................... 12 6 CONDUCTED EMISSION...........................................................................................................................13 6.1 E.U.T. O PERATION............................................................................................................................13 6.2 EUT S ETUP...................................................................................................................................... 13 6.3 T ESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)........................................................................13 6.4 M EASUREMENTPROCEDURE..............................................................................................................14 6.5 C ONDUCTEDEMISSIONLIMIT..............................................................................................................14 6.6 M EASUREMENTDESCRIPTION.............................................................................................................14 6.7 C ONDUCTEDEMISSIONTESTRESULT.................................................................................................14 7 RADIATED SPURIOUS EMISSIONS.........................................................................................................17 7.1 EUT O PERATION...............................................................................................................................17 7.2 T ESTSETUP......................................................................................................................................18 7.3 S PECTRUMANALYZERSETUP.............................................................................................................19 7.4 T ESTPROCEDURE.............................................................................................................................19 7.5 S UMMARY OFTESTRESULTS.............................................................................................................21 8 CONDUCT BAND EDGE AND SPURIOUS EMISSIONS MEASUREMENT..............................................28 8.1 T ESTSETUP......................................................................................................................................28 8.2 T EST…

Text truncated - open the document above for the full version.