2BPTC-UNA01Una Watch

Una Watch Ltd, CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Dec. 08, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BPTC-UNA01 Una Watch Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Lewis Allison Title:CEO Address: CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom Tel.: 0044 131 221 1234 Email: [email protected]

Una Watch Ltd, CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Dec. 08, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BPTC-UNA01 Product Name: Una Watch This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1.Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2.Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Lewis Allison Title:CEO Address: CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom Tel.: 0044 131 221 1234 Email: [email protected] Una Watch Ltd, CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

Una Watch Ltd CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom Date: Dec. 08, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BPTC-UNA01 US Agent – Attestation Statement / Part 2.911(d)(7) [Una Watch Ltd] certifies, that as of [Dec. 08, 2025], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BPTC-UNA01. [Una Watch Ltd], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Una Watch Ltd] for FCC ID: 2BPTC-UNA01. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Una Watch Ltd Designated Agent: FCC US Agent, LLC Company Representative: Lewis Allison FRN: 0037084506 Tel: 0044 131 221 1234 Email: [email protected] Designated Agent Representative: Tim Payne Signature: Signature:

Una Watch Ltd, CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Dec. 08, 2025 Subject; Request for Confidentiality FCC ID: 2BPTC-UNA01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lewis Allison Title: CEO

Una Watch Ltd CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom Dec. 08, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BPTC-UNA01 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Una Watch Ltd. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) Full name of contact person listed on FCC’s website: Lewis Allison Title: CEO Tel: 0044 131 221 1234 Fax:N/A Email:[email protected]

FCC ID Label Location 10mm*20mm

Page 1 of 10 RF Exposure Report Report No.: AGC02762251115FH01 FCC ID : 2BPTC-UNA01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Una Watch BRAND NAME : Una Watch MODEL NAME : 1.0 APPLICANT : Una Watch Ltd DATE OF ISSUE : Dec. 04, 2025 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC02762251115FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 04, 2025 Valid Initial Release Report No.: AGC02762251115FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC02762251115FH01 Page 4 of 10 1. General Information Applicant Una Watch Ltd Address CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom Manufacturer Una Watch Ltd Address CBC House 24 Canning Street, Edinburgh, EH3 8EG, United Kingdom Factory USRX Global Address Tingkat 4, 12B Jalan Bayu, Kawasan Perindustrian Hasil, 81200 Johor Bahru, Malaysia Product Designation Una Watch Brand Name Una Watch Test Model 1.0 Series Model(s) N/A Difference Description N/A Date of receipt of test item Nov. 20, 2025 Date of Test Nov. 20, 2025 to Dec. 04, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Dec. 04, 2025 Reviewed By Bibo Zhang (Reviewer) Dec. 04, 2025 Approved By Angela Li (Authorized Officer) Dec. 04, 2025 Report No.: AGC02762251115FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version 1.0 Software Version 0.0.14 Modulation Type BLE GFSK 1Mbps GFSK 2Mbps Maximum Transmitter Power -5.022dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Integral Antenna Antenna Gain 3.83dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC02762251115FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC02762251115FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 3.7V by battery or DC 5V by adapter Note: The Extreme Temperature and Extreme Voltages declared by the manufacturer. Report No.: AGC02762251115FH01 Page 8 of 10 4. Portable Device Evaluation Method and Limit Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding …

Text truncated - open the document above for the full version.

Tel:021-54266190 Fax:021-54266191 Web:www.zxsignalplus.com Antenna Test Report UNA Watch Antenna Type: Integral Antenna Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com DataPreview Freespacestate BT Freq.(MHz)240024502500 VSWR1.801.061.82 Gain(dBi)2.793.833.31 Eff.%41.049.243.4 Freespacestate GNSS Freq.(MHz)11661176118615611575.421602 VSWR3.102.692.401.151.281.39 Gain(dBi)0.190.210.50.070.030.15 Eff.%31.031.233.032.434.234.7 Handmodelstatus BT Freq.(MHz)240024502500 VSWR1.341.292.07 Gain(dBi)-0.6-0.31-1.21 Eff.%19.420.818.2 Handmodelstatus GNSS Freq.(MHz)11661176118615611575.421602 VSWR2.552.302.121.361.491.55 Gain(dBi)-2.08-2.23-2.26-3.38-3.56-3.33 Eff.%16.516.316.815.114.413.8 Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com 1.RFFixtureExperiment 1.1TestSetup 1.1.1VNATestSetup VSWRandReturnLossmeasurements(S11)wereperformedusingan KeySightE5071CNetworkAnalyzer.Theisolationbetweenantennasisalso tested.Thetestingwasperformedwithapparatusinfreespace. 1.1.2AnechoicChamberTestSetup Thegainoftheantennawasmeasuredintheanechoicchamber. Thechamberprovideslessthan–30dBreflectivityfrom400MHzthrough 6GHz.Thechambersizeis:7m*4m*3m.Themeasurementresultsare calibratedusingaleakywavehornstandard.Wecanmeasuretheantenna gainandefficiencyaccurately. +Z +Y +X HornAntenna Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com 2.AntennaSolution 3.RFmatchingcircuitfordifferentantennas N / A IC0 Ω N / A BT N / A IC0Ω N / A GNSS Freespacestate Handmodelstatus Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com Freespacestate BT(S11) Radiationpatterns:3D Radiationpatterns:2D(2450MHz) Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com Freespacestate GNSS(S11) Radiationpatterns:3D Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com Radiationpatterns:2D(1176/2450MHz) Freespacestate BT&GNSS(S21) Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com Handmodelstatus BT(S11) Radiationpatterns:3D Radiationpatterns:2D(2450MHz) Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com Handmodelstatus GNSS(S11) Radiationpatterns:3D Tel:021-54266190Fax:021-54266191Web:www.zxsignalplus.com Radiationpatterns:2D(1176/2450MHz) Handmodelstatus BT&GNSS(S21)

Page 1 of 49 FCC Test Report Report No.: AGC02762251115FR01 FCC ID : 2BPTC-UNA01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Una Watch BRAND NAME : Una Watch MODEL NAME : 1.0 APPLICANT : Una Watch Ltd DATE OF ISSUE : Dec. 04, 2025 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC02762251115FR01 Page 2 of 49 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 04, 2025 Valid Initial Release Report No.: AGC02762251115FR01 Page 3 of 49 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Special Accessories .................................................................................................................................. 7 2.6 Equipment Modifications ........................................................................................................................... 7 2.7 Antenna Requirement................................................................................................................................ 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory ................................................................................................................. 8 3.2 Test Facility ................................................................................................................................................ 8 3.3 Environmental Conditions ......................................................................................................................... 9 3.4 Measurement Uncertainty ......................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................. 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ................................................................................................................................... 12 4.2 EUT Exercise ........................................................................................................................................... 12 4.3 Configuration of Tested System .............................................................................................................. 12 4.4 Equipment Used In Tested System ........................................................................................................ 12 4.5 Summary of Test Results ........................................................................................................................ 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable .............................................................................................................................. 16 7.2 Measurement Procedure ......................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 16 7.4 Measurement Result ............................................................................................................................... 16 8. 6dB Bandwidth Measurement ...................................................................................................................... 19 8.1 Provisions Applicable .............................................................................................................................. 19 8.2 Measurement Procedure ......................................................................................................................... 19 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 19 8.4 Measurement Results ............................................................................................................................. 20 9. Power Spectral Density Measurement ........................................................................................................ 24 9.1 Provisions Applicable .............................................................................................................................. 24 9.2 Measurement Procedure ...........…

Text truncated - open the document above for the full version.