2BQ6S-BFM07Card Finder

Quick instructions (Note :Peel off white protective sticker before use.) 1. Power on Press and hold the button for � seconds, the device will beep and power on. 2. Pair the device A. Open the Find My app and Bluetooth. B�. Never connect finder before: Tap the "ltems" at the bottom, then tap "Add Item", and select "Other Supported Item". B�: Connect finder before: Tap the "ltems" at the bottom, then tap the "+" icon and select "Other ltem" C. When "BFM��" appears in the search results, tap to connect, Ent er a name, choose an icon, and follow the on-screen instructions, Once added, you'll see the tag's name and icon in your device list and on t he map. Tap Play Sound to hear a about �-second sound from the tag. 3. Power off Press and hold the button for � seconds, after the prompt tone, the device powers off. 4. Status Check When the card is on, single-press the button to hear a sound make the blue light flash once. Double press to hear a sound and see the blue light flash twice. If the card has been idle for a long time, it may enter sleep mode to conserve power.Press the button to wake it up-the blue light will flash. If single or double pressing the button produces no sound or light, the card is powered off, Press and hold for about � seconds to hear three beeps and power it on again. If there is still no response after holding for over � seconds, the battery is depleted. Place the card on a wireless charger. If the green light flashes or the red light turns on, it's charging. 5. Locate your item ·If your missing item isn't nearby, the Find My app can still help you track it down using the Find My network- hundreds of millions of iPhone, iPad, and Mac devices around the world. Nearby devices can detect the location of your missing device via Bluetooth signals and securely transmit this information to iCloud. · Open the Find My app, tap the items tab, then tap your item. · Click Directions, Open Apple Maps to view the location of your item. 6. Play sound · Open the Find My app, tap the items tab, then tap your item. · When the item is within the Bluetooth range of your phone, Click play sound, and the device will beep, so you can find the item easily. 7. Enable Lost Mode · Open the Find My app, tap the items tab, then tap your item. · Under lost mode, tap enable. · Read the instructions, tap continue and enter a phone number or email address. · Confirm the information, customize the lost message, and tap activate to complete the setup. 8. Remove the device · Open the Find My app, tap the items tab, then tap your item. · Tap remove item and then tap remove to complete the operation. Note: After removing the device in the app, the device will beep and the light will flash. It will not shut down but enter pairing mode. If no re-pairing occurs within �� minutes, the device will exit pairing mode and power off automatically. 9. Factory Reset ·Connection error: Factory reset first, then connect. ·Reset Procedure: With the device powered on, first press the device button twice in quick succession. After the device emits a prompt tone, immediately press the button five times in quick succession. When the device emits a prompt tone again and the indicator light flashes, the reset is complete. 10. Wireless Charging The battery level will be shown in the Find My app. When charging, place the "Charging Side" on the wireless charger, aligning it with the charging area.(Supports phone and earbud wireless chargers. ·Flashing green or steady red light means charging is in progress. ·Flashing red light indicates abnormal charging alignment. Please remove the product and reposition it for proper alignment before charging. ·Steady green light indicates charging is complete. · Each full charge can last approximately two months. 11. FAQ-Common Issues - Find My app not working properly: · Ensure you're signed in with your Apple lD. · Make sure Bluetooth and location services are enabled. · Check that security settings aren't overly restrictive. · iOS version should be ��.� or higher. · For more, visit: Apple Support - Cannot find or connect to "BFM07": ·Don't use the Bluetooth settings directly-use the Find My app. ·Don't choose "AirTag" -- choose "Other ltem" or "Other Supported ltem" ·The card may be off or out of battery. Double-check the tag status. ·If the card is already bound to an Apple ID, it cannot be connected by another Apple ID. To bind it to a different Apple ID, you must first remove it from the original Apple ID and perform a factory reset. ·Other causes: outdated iOS version, slow phone, dead battery, poor network. Try resetting the tag, restarting the phone, or changing network. - Location not updating promptly: This depends on Apple's update policy, your network conditions, and where the tag is located. Try using it outdoors or in crowded areas. - Need to Wake up: If the card shows "unreachable", has been idle for a long time, location hasn't updated for a while, double-press the power button to wake it up. If it has been recharged after battery depletion, you need to power it on again. Legal Notice The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch. To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find ltems app on Apple Watch requires the latest version of watchOS. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are the trademarks of Apple Inc. IOS is a trademark or regi…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Picus Advisors US LLC FRN: 0034336891 Contact Name: lvan Wang Address: 5855 SOVEREIGN DRSTE B-1, HOUSTON, TX 77036, USA Telephone No: +1(713) 271-9600 Email: [email protected] Applicant: Company name: DongGuan Monuo Innovation Technology Co., Limited FRN: 0037324621 Product Description: Card Finder Grantee code: 2BQ6S FCC ID: 2BQ6S-BFM07 Contact Name: Xudong Chen Address: 5/F Building 8,Haiyong Science Park,No. 2 of Shangxiawei Industrial Road, Zhutang, Fenggang Town, Dongguan City, Guangdong, China Telephone No: 0769-87009416 Email: [email protected] [DongGuan Monuo Innovation Technology Co., Limited] certifies that, as of the date of this filing of the application with the TCB, [Picus Advisors US LLC] is our designated US agent for service of process for the above referenced FCC ID. [DongGuan Monuo Innovation Technology Co., Limited] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Picus Advisors US LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 02.06.2026 Applicant’s Name: Xudong Chen US Agent’s Name: lvan Wang Title: manager Title: CEO Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: DongGuan Monuo Innovation Technology Co., Limited Grantee code: 2BQ6S FCC ID: 2BQ6S-BFM07 FRN: 0037324621 Contact Name: Xudong Chen Address: 5/F Building 8,Haiyong Science Park,No. 2 of Shangxiawei Industrial Road, Zhutang, Fenggang Town, Dongguan City, Guangdong, China Telephone No: 0769-87009416 Fax No: 0769-87009416 Email: [email protected] i. [DongGuan Monuo Innovation Technology Co., Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [DongGuan Monuo Innovation Technology Co., Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. DongGuan Monuo Innovation Technology Co., Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 02.06.2026 Applicant’s Name: Xudong Chen Title: manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

DongGuan Monuo Innovation Technology Co., Limited Code 00018768 Ed. 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device Card Finder Company name DongGuan Monuo Innovation Technology Co., Limited Grantee code 2BQ6S FCC ID 2BQ6S-BFM07 FRN 0037324621 Contact name Xudong Chen Address 5/F Building 8,Haiyong Science Park,No. 2 of Shangxiawei Industrial Road, Zhutang, Fenggang Town, Dongguan City, Guangdong, China Telephone number 0769-87009416 E-mail [email protected] Chipset/module information JC511 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A 3 # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software 4 Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Xudong Chen Date: 2/6/2026 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

DongGuan Monuo Innovation Technology Co., Limited Product Similarity Declaration Product name: Card Finder Model name: BFM07, BFM06, MSECard, Ultr Card FCC ID: 2BQ6S-BFM07 We (DongGuan Monuo Innovation Technology Co., Limited) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and appearance (texture, shape differences). Model: BFM06, MSECard BFM07, Ultr Card Signature: Name: Xudong Chen Title: manager Date: 2/10/2026

TCB CALL página 1 File FCC ID: 2BQ6S-BFM07 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. Google: TCB CALL página 2 EIN Statement TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter"

C5266091_X10_Ed.2 1/1 DongGuan Monuo Innovation Technology Co., Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2/6/2026 Subject: Request for Confidentiality FCC ID: 2BQ6S-BFM07 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Xudong Chen Title: manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: DongGuan Monuo Innovation Technology Co., Limited Address: 5/F Building 8,Haiyong Science Park,No. 2 of Shangxiawei Industrial Road, Zhutang, Fenggang Town, Dongguan City, Guangdong, China Product Name: Card Finder Model Number: BFM07, BFM06, MSECard, Ultr Card FCC Identifier: 2BQ6S-BFM07 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xudong Chen Date: 2/6/2026 Title: manager Signature of applicant:

Page1of4ReportNo.:MTi260106030-0102 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] PhotographsoftheEUT External Model:BFM07 Page2of4ReportNo.:MTi260106030-0102 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Page3of4ReportNo.:MTi260106030-0102 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Page4of4ReportNo.:MTi260106030-0102 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Model:BFM07,UltrCard

SN:xxxxxxxxxxxxxxxx Model: BFM��Battery: �.�V Li-Po ���mAh / �.��WhMade in China ���-J����� FCC ID: �BQ�S-BFM��

Page 1 of 3 Report No.: MTi260106030-0102 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT Internal Model: BFM06, MSECard Page 2 of 3 Report No.: MTi260106030-0102 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Bluetooth ANT WPT/NFC RX ANT Page 3 of 3 Report No.: MTi260106030-0102 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected]

Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page1of6 RFEXPOSURE TestReport ReportNo.:MTi260106030-0102E2 Dateofissue:2026-02-05 Applicant:DongGuanMonuoInnovationTechnologyCo., Limited Product:CardFinder Model(s):BFM07,BFM06,MSECard,UltrCard FCCID:2BQ6S-BFM07 ShenzhenMicrotestCo.,Ltd. TESTREPORT ReportNo.:MTi260106030-0102E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page2of6 Tableofcontents 1StandaloneSARtestexclusionconsiderations.................................................................4 2SARTestExclucsionThresholds.........................................................................................5 TESTREPORT ReportNo.:MTi260106030-0102E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page3of6 TestResultCertification ApplicantDongGuanMonuoInnovationTechnologyCo.,Limited ApplicantAddress 5/FBuilding8,HaiyongSciencePark,No.2ofShangxiaweiIndustrialRoad, Zhutang,FenggangTown,DongguanCity,Guangdong,China ManufacturerDongGuanMonuoInnovationTechnologyCo.,Limited ManufacturerAddress 5/FBuilding8,HaiyongSciencePark,No.2ofShangxiaweiIndustrialRoad, Zhutang,FenggangTown,DongguanCity,Guangdong,China FactoryDongGuanMonuoInnovationTechnologyCo.,Limited FactoryAddress 5/FBuilding8,HaiyongSciencePark,No.2ofShangxiaweiIndustrialRoad, Zhutang,FenggangTown,DongguanCity,Guangdong,China Productdescription ProductnameCardFinder TrademarkN/A ModelnameBFM07 SeriesModel(s)BFM06,MSECard,UltrCard Standards47CFRPart2.1093 TestmethodKDB447498D01v06 TestingInformation Dateoftest2026-01-14to2026-02-05 TestResultPass Preparedby:ManusWang Reviewedby:DavidLee Approvedby:LewisLian TESTREPORT ReportNo.:MTi260106030-0102E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page4of6 1StandaloneSARtestexclusionconsiderations UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-g headorbodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions,by measurementornumericalsimulation,isnotrequiredwhenthecorrespondingSARTest ExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Thesetestexclusionconditionsarebasedonsource-basedtime-averagedmaximum conductedoutputpoweroftheRFchannelrequiringevaluation,adjustedfortune-uptolerance, andtheminimumtestseparationdistancerequiredfortheexposureconditions. Theminimumtestseparationdistancedefinedin4.1f)isdeterminedbythesmallestdistance fromtheantennaandradiatingstructuresoroutersurfaceofthedevice,accordingtothehost formfactor,exposureconditionsandplatformrequirements,toanypartofthebodyorextremity ofauserorbystander. ToqualifyforSARtestexclusion,thetestseparationdistancesappliedmustbefullyexplained andjustified,typicallyintheSARmeasurementorSARanalysisreport,bytheoperating configurationsandexposureconditionsofthetransmitterandapplicablehostplatform requirements,accordingtotherequiredpublishedRFexposureKDBprocedures. WhennootherRFexposuretestingorreportingarerequired,astatementofjustificationand compliancemustbeincludedintheequipmentapproval,inlieuoftheSARreport,toqualifyfor SARtestexclusion. Whenrequired,thedevicespecificconditionsdescribedintheotherpublishedRFexposure KDBproceduresmustbesatisfiedbeforeapplyingtheseSARtestexclusionprovisions. a)For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where  f (GHz) istheRFchanneltransmitfrequencyinGHz  PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Thevalues3.0and7.5arereferredtoasnumericthresholdsinstepb)below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mm, andfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmaccordingto4.1f)isappliedtodetermine SARtestexclusion. b)For100MHzto6GHzandtestseparationdistances>50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing(alsoillustratedinAppendixB): 1){[Powerallowedatnumericthresholdfor50mminstepa)]+[(testseparation distance–50mm)·(f(MHz)/150)]}mW,for100MHzto1500MHz 2){[Powerallowedatnumericthresholdfor50mminstepa)]+[(testseparation distance–50mm)·10]}mW,for>1500MHzand≤6GHz c)Forfrequenciesbelow100MHz,thefollowingmaybeconsideredforSARtestexclusion (alsoillustratedinAppendixC): 1)Fortestseparationdistances>50mmand<200mm,thepowerthresholdatthe correspondingtestseparationdistanceat100MHzinstepb)ismultipliedby[1+ log(100/f(MHz))] TESTREPORT ReportNo.:MTi260106030-0102E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page5of6 2)Fortestseparationdistances≤50mm,thepowerthresholddeterminedbythe equationinc)1)for50mmand100MHzismultipliedby½ 3)SARmeasurementproceduresarenotestablishedbelow100MHz. WhenSARtestexclusioncannotbeapplied,aKDBinquiryisrequiredtodetermineSAR evaluationrequirementsforanySARtestresultsbelow100MHztobeacceptable. …

Text truncated - open the document above for the full version.

Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page 1 of 61 TestReport ReportNo.:MTi260106030-0102E1 Dateofissue:2026-02-10 Applicant:DongGuanMonuoInnovationTechnologyCo.,Limited Product:CardFinder Model(s):BFM07,BFM06,MSECard,UltrCard FCCID:2BQ6S-BFM07 ShenzhenMicrotestCo.,Ltd. TESTREPORT ReportNo.:MTi260106030-0102E1 Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page 2 of 61 Tableofcontents 1GeneralDescription.......................................................................................................................4 1.1DescriptionoftheEUT.........................................................................................................4 1.2Descriptionoftestmodes.....................................................................................................4 1.3EnvironmentalConditions.....................................................................................................6 1.4Descriptionofsupportunits..................................................................................................6 1.5Measurementuncertainty.....................................................................................................6 2SummaryofTestResult................................................................................................................7 3TestFacilitiesandaccreditations................................................................................................8 3.1Testlaboratory......................................................................................................................8 4Listoftestequipment....................................................................................................................9 5EvaluationResults(Evaluation).................................................................................................11 5.1Antennarequirement..........................................................................................................11 6RadioSpectrumMatterTestResults(RF)................................................................................12 6.16dBBandwidth....................................................................................................................12 6.2MaximumConductedOutputPower................................…

Text truncated - open the document above for the full version.