2BQACEMM01Emm Smart Menstrual Cup

UL International (UK) Ltd ULID-018088 issue 3.0 FCC Applicant Attestation letter template 14/04/2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: CFR 47 §2.911 (d)(7) Agent Designation Attestation Applicant: Emm Technology Ltd FCC ID: 2BQACEMM01 Model number/name: EMM01 To whom it may concern The applicant as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. U.S. Agent for service of process information: Company Name: FCC US Agent FRN: 0033402884 Contact Person: Tim Payne Company Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Agent Email Address: [email protected] The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Sincerely yours, Name: Sophie Dawson Job Title: Senior Quality Engineer

UL International (UK) Ltd ULID-018088 issue 3.0 FCC Agent Attestation letter template 4/13/2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Applicant: Emm Technology Ltd FCC ID: 2BQACEMM01 Model number/name: EMM01 To whom it may concern This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of the above applicant for the above referenced FCC ID. U.S. Agent for service of process information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Name: Tim Payne Job Title: Manager

UL International (UK) Ltd ULID-018088 issue 5 23-JUN-2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: CFR 47 §2.911 (d)(5) Attestation Applicant: Emm Technology Ltd FCC ID: 2BQACEMM01 Model number/name: EMM01 To whom it may concern 1. The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. The applicant certifies that the equipment does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. The applicant certifies that the equipment is not a router “produced in a foreign country”. 4. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Sophie Dawson Job Title: Senior Quality Engineer

UL International (UK) Ltd ULID-006026 issue 4.0 03-Sep-2025 Telecommunication Certification Body UL International (UK) Ltd Units 1-4, Horizon Wade Road, Kingsland Business Park Basingstoke, Hampshire RG24 8AH United Kingdom Subject: Authorisation Letter Applicant: Emm Technology Ltd FCC ID: 2BQACEMM01 Model number/name: EMM01 To whom it may concern The applicant hereby authorises UL International (UK) Ltd. to act as the TCB for the above application to the FCC. The applicant certifies that they are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. The applicant also acknowledges that the FCC operates a certification scheme that makes some documentation (information) accessible to the public in accordance with FCC KDB publication 726920 D01. This is information that is generally known to the public. Yours faithfully, Sophie Dawson, Senior Quality Engineer

UL International (UK) Ltd ULID-006028 issue 3.0 14-JAN-2026 Telecommunication Certification Body UL International (UK) Ltd Units 1-4, Horizon Wade Road, Kingsland Business Park Basingstoke, Hampshire RG24 8AH United Kingdom Subject: Short-Term Confidentiality (STC) Request Applicant: Emm Technology Ltd FCC ID: 2BQACEMM01 Model number/name: EMM01 STC date: Duration of 180 days To whom it may concern In accordance with §0.457 and §0.459 of CFR 47, the applicant requests the short-term confidentiality of the items listed below until the above STC date for the above device.  Internal Photos  Test Set Up Photos  User Guide These items contain proprietary information related to the design of the product which has not yet been released to the market. The public disclosure of this information prior to public launch may be harmful to our company and provide unjust benefits to its competitors. The above period is requested to protect this information before formal market launch. If the launch date is re-scheduled to be earlier than the date stated above, the applicant will inform you to cancel this restriction. Please contact the undersigned if there are any further questions or additional information needed in this matter. Yours faithfully, Sophie Dawson, Senior Quality Engineer

UL International (UK) Ltd ULID-006027 issue 3.0 14-JAN-2026 Telecommunication Certification Body UL International (UK) Ltd Units 1-4, Horizon Wade Road, Kingsland Business Park Basingstoke, Hampshire RG24 8AH United Kingdom Subject: Permanent Confidentiality Request Applicant: Emm Technology Ltd FCC ID: 2BQACEMM01 Model number/name: EMM01 To whom it may concern Pursuant to Sections 0.457(d) and 0.459 of CFR 47, the applicant requests that the following information, provided to support the FCC application for the above device be held permanently confidential: Schematics Block Diagrams Parts List Operational Description SW Security Information The above material contains trade secrets not customarily released to public that are judged to have the potential to cause detriment to the applicant and provide unjustified benefits to its competitors. This information should not be available for public disclosure for an indefinite period of time. Yours faithfully Sophie Dawson, Senior Quality Engineer

23-JUN-2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: FCC Labeling and User Information Justification Applicant: Emm Technology Ltd FCC ID: 2BQACEMM01 Model number/name: EMM01 To whom it may concern The Emm Smart Menstrual Cup (Model EMM01) is a Bluetooth Low Energy (BLE) enabled menstrual cup intended for intravaginal use. The device is manufactured from flexible medical-grade silicone and incorporates embedded electronics and sensors for menstrual fluid volume measurement. Pursuant to FCC KDB 784748 D01 General Labeling and Notification Guidance, the applicant respectfully requests acceptance for alternative labeling and compliance information placement. Placement of the FCC ID and FCC compliance statements directly on the device is impracticable for the following reasons: 1. The device has a continuously curved geometry with no suitable flat surface capable of accommodating readily legible regulatory markings. 2. The available external areas, including the stem portion, are too small to accommodate the FCC ID and required compliance statements in a font size that remains readily legible, as required by FCC labeling guidance. 3. The device is manufactured from flexible medical-grade silicone, which limits the feasibility of applying durable and clearly readable permanent markings. 4. The product is intended for intravaginal use. Placement of regulatory markings on surfaces intended for direct bodily contact is undesirable from both a usability and user comfort perspective. 5. The device does not incorporate a display and therefore electronic labeling (e-labeling) is not available. In accordance with FCC KDB 784748 D01, the FCC ID is provided in the user manual and on the retail packaging of the device. The applicant further notes that, due to the same physical and use-related constraints described above, placement of the FCC Part 15.19(a)(3) compliance statement directly on the device is likewise impracticable. The user manual supplied with the product includes the FCC Section 15.105(b) Class B digital device statement. As indicated in FCC KDB 784748 D01 General Labeling and Notification Guidance, inclusion of the Section 15.105(b) statement in the user manual satisfies the applicable user information requirements, and it is therefore not necessary to additionally provide the Section 15.19(a)(3) statement within the user manual. The retail packaging includes the FCC ID (2BQACEMM01) together with the FCC Part 15.19(a)(3) compliance statement. Accordingly, the required FCC compliance information is provided through the user documentation and product packaging rather than on the device itself. The applicant therefore believes that the proposed labeling and user information method fully complies with the alternative labeling provisions of FCC KDB 784748 D01 General Labeling and Notification Guidance and respectfully requests acceptance of this approach. Sincerely yours, Name: Sophie Dawson Job Title: Senior Quality Engineer

Cup model number: EMM01 Charger model number: EMM01-CH FILE-0214-D (01)XXXXXXXXXXXXXX(21) WWYYXXXXCCCCLL (11)YYYY-MM-DD YYYY-MM-DD WWYYXXXXCCCCLL Emm Technology Ltd, Unit 10 Temple Studios, Temple Gate BS1 6QA Bristol, UK Made in Malaysia www.emm.co/downloads The Emm Smart Menstrual Cup is a receptacle placed in the vagina to collect blood and cellular debris that is exuded from the uterus via the cervix during menstruation. The Cup component contains embedded sensors to provide a quantitative volume measurement output to the user. Emm Smart Menstrual Cup Storage conditions –25 °C to +5 °C +5 °C to +35 °C at up to 90% relative humidity (non-condensing) +35 °C to +70 °C at a water vapour pressure up to 50 hPa FCC ID: 2BQACEMM01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Analysis – SAR Test Exemption Applicant: EMM TECHNOLOGY LTD FCC ID: 2BQACEMM01 Model number/name: EMM01 The above device operates in the 2402-2483.5 MHz frequency band (BLE). The following FCC Rule Parts are applicable: • Part 1.1307(b)(3)(i)(A) – 1 mW Blanket Exemption (i) • Part 1.1307(b)(3)(i)(C) – MPE-based Exemption (ii) • Part 1.1307(b)(3)(i)(B) – SAR-based Exemption (iii) For the above device: Transmitter frequency range = 2402 MHz to 2483.5 MHz Maximum Conducted Power = −3.5 dBm (including tune-up tolerance) Antenna gain: +1.8 dBi Duty Cycle: 100 % EIRP = -3.5 dBm + 1.8 dBi = -1.7 dBm = 0.68 mW As the calculated EIRP is higher than the conducted transmitter output power this figure is compared to the specified exemption limits of Part 1.1307 Evaluation: From Part 1.1307, RF exposure exemption applies if the maximum transmitted power is less than the maximum of the following three criteria: i) Less than 1 mw Blanket exemption. P TH = 0.001 W – §1.1307(b)(3)(i)(A) ii) determination of exemption under the MPE-based §1.1307(b)(3)(i)(C), if i) not met - met iii) determination of exemption under the SAR-based §1.1307(b)(3)(i)(B) if both i) and ii) are not met; Conclusion The EMM01 maximum EIRP is less than 1 mW and, therefore, complies with the RF exposure blanket exemption in accordance with §1.1307(b)(3)(i)(A). Certification Body UL International (UK) Ltd

UL International (UK) LTD Unit 1-4 Horizon, Kingsland Business Park, Wade Road, Basingstoke, Hampshire, RG24 8AH, UK Telephone: +44 (0)1256 312000 TEST REPORT Test Report No. : UL-RPT-RP15240581-716A Applicant* : Emm Technology Ltd Model No.* : EMM01 FCC ID* : 2BQACEMM01 Technology : Bluetooth – Low Energy Test Standard(s) : FCC Parts 15.35(c), 15.207, 15.209(a) & 15.247 Test Laboratory : UL International (UK) Ltd, Basingstoke, Hampshire, RG24 8AH, United Kingdom 1. This test report shall not be reproduced except in full, without the written approval of UL International (UK) Ltd. 2. The results in this report apply only to the sample(s) tested. 3. The sample tested is in compliance with the above standard(s). 4. The test results in this report are traceable to the national or international standards. 5. All information marked with (*) was provided by the Customer, Applicant or Authorised representative 6. Version 2.0 supersedes all previous versions. Date of Issue: 24 June 2026 Checked by: Ben Mercer Lead Test Engineer, Radio Laboratory Company Signatory: Sarah Williams Staff Engineer, Radio Laboratory The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by UL International (UK) Ltd is under licence. Other trademarks and trade names are those of their respective owners. TEST REPORT SERIAL NO: UL-RPT-RP15240581-716A VERSION 2.0 ISSUE DATE: 24 JUNE 2026 Page 2 of 33 Applicant Information Company Name*: Emm Technology Ltd Address*: Unit 10 Temple Studios Bristol BS1 6QA Report Revision History Version Number Issue Date Revision Details Revised By 1.0 29/01/2026 Initial Version Ben Mercer 2.0 24/06/2026 Updated ANSI C63.10 version and antenna gain Ben Mercer TEST REPORT SERIAL NO: UL-RPT-RP15240581-716A VERSION 2.0 ISSUE DATE: 24 JUNE 2026 Page 3 of 33 Table of Contents Applicant Information .................................................................................................................. 2 Report Revision History .............................................................................................................. 2 Table of Contents ......................................................................................................................... 3 1 Attestation of Test Results ....................................................................................................... 4 1.1 Description of EUT 4 1.2 General Information 4 1.3 Summary of Test Results 5 1.4 Deviations from the Test Specification 5 2 Summary of Testing.................................................................................................................. 6 2.1 Facilities and Accreditation 6 2.2 Methods and Procedures 6 2.3 Calibration and Uncertainty 7 2.4 Sample Calculations 8 2.5 Test and Measurement Equipment 8 3 Equipment Under Test (EUT) ................................................................................................. 11 3.1 Identification of Equipment Under Test (EUT) 11 3.2 Modifications Incorporated in the EUT 11 3.3 Additional Information Related to Testing 11 3.4 Description of Available Antennas 11 3.5 Description of Test Setup 12 4 Antenna Port Test Results ..................................................................................................... 16 4.1 Minimum 6 dB Bandwidth 16 4.2 Maximum Peak Output Power 18 5 Radiated Test Results ............................................................................................................. 19 5.1 Duty Cycle 19 5.2 Radiated Emissions <1 GHz 21 5.3 Radiated Emissions >1 GHz 23 5.4 Band Edge Radiated Emissions 26 6 AC Power Line Conducted Emissions Test Results ............................................................. 29 6.1 AC Conducted Spurious Emissions 29 TEST REPORT SERIAL NO: UL-RPT-RP15240581-716A VERSION 2.0 ISSUE DATE: 24 JUNE 2026 Page 4 of 33 1 Attestation of Test Results 1.1 Description of EUT The equipment under test (EUT) was a smart menstrual cup. 1.2 General Information Specification Reference: 47CFR15.247 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications): Part 15 Subpart C (Intentional Radiators) – Section 15.247 Specification Reference: 47CFR15.209 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications): Part 15 Subpart C (Intentional Radiators) – Sections 15.209 Site Registration: 685609 FCC Lab. Designation No.: UK2011 Location of Testing: Units 3 & 4 Horizon, Wade Road, Kingsland Business Park, Basingstoke, Hampshire, RG24 8AH, United Kingdom Test Dates: 12 January 2026 to 28 January 2026 TEST REPORT SERIAL NO: UL-RPT-RP15240581-716A VERSION 2.0 ISSUE DATE: 24 JUNE 2026 Page 5 of 33 1.3 Summary of Test Results FCC Clause (47CFR) Transmitter Measurement Result Part 15.35(c) Duty Cycle Note 1 Part 15.247(a)(2) Minimum 6 dB Bandwidth Complied Part 15.247(b)(3) Maximum Peak Output Power Complied Part 15.247(e) Power Spectral Density Note 2 Part 15.247(d) & 15.209(a) Radiated Emissions Complied Part 15.247(d) & 15.209(a) Band Edge Radiated Emissions Complied Part 15.207 AC Conducted Emissions Complied Note(s): 1. Reporting purposes only. 2. In accordance with ANSI C63.10 Section 11.10.1, PSD measurements are not required if the maximum conducted output power is less than the PSD limit of 8 dBm / 3 kHz. The PSD level is therefore deemed be equal to the measured output power. 1.4 Deviations from the Test Specification For the measurements contained within this test report, there were no deviations from, additions to, or exclusions from the test specification identified above. TEST REPORT SERIAL NO: UL-RPT-RP15240581-716A VERSION 2.0 ISSUE DATE: 24 JUNE 2026 Page 6 of 33 2 Summary of Testing 2.1 Facilities and Accreditation The test site and measurement facilities used to collect data are located at Units 3 & 4 Horizon, Wade Road, Kingsland Business Park, Basingstoke, Hampshire, RG24 8AH, United Kingdom. The following table identifies which facilities were utilised for radi…

Text truncated - open the document above for the full version.