2BQGQ-AT100MINI PC

Shenzhen Weijingnako Technology Co., Ltd Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: May. 7, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BQGQ-AT100 Shenzhen Weijingnako Technology Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Shenzhen Weijingnako Technology Co., Ltd Title: manager Address: Room 2209, AGI Cloud Tower, Unit 1, Heping Times Square, Heping Road, Qinghua Community, Longhua Subdistrict, Longhua District, Shenzhen City China Tel.: 15210011922 Email: [email protected]

Shenzhen Weijingnako Technology Co., Ltd 1 | P a g e Attestation Statements To: Federal Communications Commission Date: May. 7, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2BQGQ-AT100] Product Name: [MINI PC] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Liu Yadong Title: manager Address: Room 2209, AGI Cloud Tower, Unit 1, Heping Times Square, Heping Road, Qinghua Community, Longhua Subdistrict, Longhua District, Shenzhen City China Tel.: 15210011922 Email: [email protected] Shenzhen Weijingnako Technology Co., Ltd 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☐ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☒ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) Section Component Name Version Supplier 1 windows 11 Microsoft 2 3

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company name: HOPEK CORPORATION INC FRN: 0034562900 Contact Name: Yangyang Xu Address: 16755 Coyote Bush Dr Unit 84, San Diego, CA 92127 United States Telephone No: 561-875-9826 Email: [email protected] Applicant: Company name: Shenzhen Weijingnako Technology Co., Ltd Grantee Code: 2BQGQ FCC ID: 2BQGQ-AT100 FRN: 0037190758 Contact Name: Liu Yadong Address: Room 2209, AGI Cloud Tower, Unit 1, Heping Times Square, Heping Road, Qinghua Community, Longhua Subdistrict, Longhua District, Shenzhen City China Telephone No: 15210011922 Fax No: / Email: [email protected] Shenzhen Weijingnako Technology Co., Ltd certifies that, as of the date of this filing of the application with the TCB, [HOPEK CORPORATION INC] is our designated US agent for service of process for the above referenced FCC ID. Shenzhen Weijingnako Technology Co., Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [HOPEK CORPORATION INC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2026-05-07 Applicant’s Name: Liu Yadong US Agent’s Name: Yangyang Xu Title: manager Title: manager Signature: Signature:

Shenzhen Weijingnako Technology Co., Ltd Family models declaration letter. Date: May 7, 2026 We Shenzhen Weijingnako Technology Co., Ltd Of Room 2209, AGI Cloud Tower, Unit 1, Heping Times Square, Heping Road, Qinghua Community, Longhua Subdistrict, Longhua District, Shenzhen City China Product: MINI PC Model Name: AT100 Serial Model: AT101,AT102,AT104,AT105,AT106,AT107,AT108,AT109,AT110,AT111,AT112,AT113,AT114,A T115,AT103 Difference description of series models: Except for the model name, color, and sales area, all models have the same circuit and RF module Thanks Sincerely Signature Name: Liu Yadong Date: May.07, 2026 Title: manager

Shenzhen Weijingnako Technology Co., Ltd May 07, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BQGQ-AT100 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description  Software Security Requirements for UNII devices The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired.  User Manual  Internal Photos  External Photos  Test Setup Photos Sincerely, Title: manager Address: Room 2209, AGI Cloud Tower, Unit 1, Heping Times Square, Heping Road, Qinghua Community, Longhua Subdistrict, Longhua District, Shenzhen City China Tel.: 15210011922 Email: [email protected]

Shenzhen Weijingnako Technology Co., Ltd May 07, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BQGQ-AT100 I, the undersigned, hereby authorize Shenzhen ETR Standard Technology Co., Ltd. to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by Shenzhen ETR Standard Technology Co., Ltd. shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Shenzhen Weijingnako Technology Co., Ltd We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Title：manager Tel: 15210011922 Fax: / Email: [email protected]

Shenzhen Weijingnako Technology Co., Ltd FCC Software Configuration Control Declaration Rev1.0.docx FCC Software Configuration Control Declaration Date: May 7, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: MINI PC AT100,AT101,AT102,AT104,AT105,AT106,AT107,AT108,AT109,AT110,AT111,AT11 2,AT113,AT114,AT115,AT103 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. (Signature of applicant) Name: Liu Yadong Date: May. 7, 26 Title: manager Tel: 15210011922 Fax: / Email: [email protected]

Made in China SN: Model: AT100 RAM: 8GB ROM: 256GB CPU: intel Core 3 304 Factory：Hubei Yingzhong Information Technology Co., Ltd. Input: 19V 3.42A FCC ID:2BQGQ-AT100 50mm*35mm

FCC ID: 2BQGQ-AT100 RF Exposure Evaluation Limits According to47 CFR Part 2.1091 and 447498 D01 General RF Exposure Guidance v06 The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. FCC ID: 2BQGQ-AT100 Test Result of RF Exposure Evaluation The source of the evaluation data results is based on the test report ET-26041609E01/02/03 BLE Antenna gain=4.58dBi 2.4G WIFI Antenna gain=5.86dBi 5G WIFI Antenna gain=4.25dBi FOR BLE Mode Output power (dBm) Tune-up power (dBm) Max Tune-up (dBm) Max Tune-up (mW) Numeric antenna gain Power Density at R=20cm (mW/cm2) Limit (mW/cm2) Result GFSK 0.60 1±1 2 1.58 2.87 0.0009 1.0 PASS FOR 2.4GWIFI Mode Output power (dBm) Tune-up power (dBm) Max Tune-up (dBm) Max Tune-up (mW) Numeric antenna gain Power Density at R=20cm (mW/cm2) Limit (mW/cm 2 ) Result 802.11b 13.84 14±1 15 31.62 3.85 0.0242 1.0 PASS 802.11g 13.85 14±1 15 31.62 3.85 0.0242 1.0 PASS 802.11n20 13.73 14±1 15 31.62 3.85 0.0242 1.0 PASS 802.11n40 13.67 14±1 15 31.62 3.85 0.0242 1.0 PASS FOR 5GWIFI Mode Output power (dBm) Tune-up power (dBm) Max Tune-up (dBm) Max Tune-up (mW) Numeric antenna gain Power Density at R=20cm (mW/cm2) Limit (mW/cm 2 ) Result 802.11a 13.45 13±1 14 25.12 2.66 0.0133 1.0 PASS 802.11n20 13.77 14±1 15 31.62 2.66 0.0167 1.0 PASS 802.11ac20 13.40 13±1 14 25.12 2.66 0.0133 1.0 PASS 802.11n40 12.20 12±1 13 19.95 2.66 0.0106 1.0 PASS 802.11ac40 12.19 12±1 13 19.95 2.66 0.0106 1.0 PASS 802.11ac80 11.26 11±1 12 15.85 2.66 0.0084 1.0 PASS FCC ID: 2BQGQ-AT100 FOR 5.8GWIFI Mode Output power (dBm) Tune-up power (dBm) Max Tune-up (dBm) Max Tune-up (mW) Numeric antenna gain Power Density at R=20cm (mW/cm2) Limit (mW/cm 2 ) Result 802.11a 14.56 15±1 16 39.81 2.66 0.0211 1.0 PASS 802.11n20 14.12 14±1 15 31.62 2.66 0.0167 1.0 PASS 802.11ac20 14.24 14±1 15 31.62 2.66 0.0167 1.0 PASS 802.11n40 13.72 14±1 15 31.62 2.66 0.0167 1.0 PASS 802.11ac40 13.68 14±1 15 31.62 2.66 0.0167 1.0 PASS 802.11ac80 12.18 12±1 13 19.95 2.66 0.0106 1.0 PASS If BT and WIFI work simultaneously BLE+2.4G WIFI, the total power density is 0.0009/1+0.0242/1=0.0251<1. BLE+5GWIFI, the total power density is 0.0009/1+0.0167/1=0.0176<1. BLE+5.8GWIFI, the total power density is 0.0009/1+0.0211/1=0.0220<1. Maximum power density=0.0251<1. Then SAR evaluation is not require .

SPECIFICATION FOR APPROVAL 2025.06.16DATE: AREV.: Shanghai Liulian Intelligent Technology Co., Ltd 2.4G&5G WiFi FPC，1.13 L=150mm with RF CONN(4) for ACB19D-H01-SF 6241F00049 CUSTOMER: CUSTOMER P/N: PART NAME: SUPPLIER P/N: Date: Q’TY: Pcs CUSTOMER APPROVED BY Approvaled by Checked by Confirmed by SUPPLIER SIGNATURE Approvaled by Checked byPrepared by AndyCindy ZX-QT-RD-0011-A1 Add:Room 603, Building 30, No. 69 Guiqing Road, Xuhui District, Shanghai, China Tel:021-54266190 Fax:021-54266191 Contents ItemDescriptionPage 1. ..................Cover.................. 1 2. ..................Content.................. 2 3. ..................Drawing.................. 3 4. ..................... Antenna Test Report ............... 4~11 FILE: 6 5 4 3 2 NO DRAWING CHECKED APPROVED SHEET: 1/1 UNIT REV mm X1 DESCRIPTION CUSTOMER: PART NO: Z&X P/NO: PART NAME: 1 A B C DE 5 6 Q'TY REMARK 2 3 4 1 F REV DATE DESCRIPTION G CUSTOMER'S SINGATURE X1 New Issue 08/16-2024 .XX ±0.2 ±0.3 ±0.5 ±1.0 ±2.0 .X X. XX. XXX. 2.4G&5G WiFi Signal Plus Technology Co.,Ltd. 上海增信电子有限公司 1 2 Antenna FPC board,Black solder resist ink 1 1 Cable 1.13 Coaxial cable;Color:Black 6241F00049 502-1-0642-X1 3 1 Connector IPEX-4 compatible;Gold-Plated 0.23±0.05 此处焊接 1.ELECTRICAL PROPERTIES： 1.1 Frequency Range.......2.4~2.5&5.15~5.85GHz 1.2 Impendance..............50 Ohm Nominal 2.These Products are in conformity with ROHS2.0 3.Strict size is marked with "*",and () for reference. *150±5 *26.2±0.2 *9.8±0.2 0642-X1-MAIN 天线标识 焊接时 端子朝向依图 允许转动±75° 1 2 3 Antenna Test Report 1.RF Fixture Experiment 1.1 Test Setup 1.1.1 VNA Test Setup VSWR and Return Loss measurements (S11) were performed using an KeySight E5071C Network Analyzer. The isolation between antennas is also tested. The testing was performed with apparatus in free space. 1.1.2 Anechoic Chamber Test Setup The gain of the antenna was measured in the anechoic chamber. The chamber provides less than –30 dB reflectivity from 400 MHz through 6 GHz. The chamber size is:7m*4m*3m. The measurement results are calibrated using a leaky wave horn standard. We can measure the antenna gain and efficiency accurately. +Z +Y +X Horn Antenna 2.AntennaSolution 3.RF matchingcircuitfor differentantennas IC0欧姆 N/A N/A Ant 1~2 Data Preview Freq Gain Effi (MHz) (dBi) (%) 2400 4.58 46% 2450 3.69 49% 2500 2.83 48% 5150 0.09 33% 5250 0.66 40% 5350 1.48 44% 5450 0.95 40% 5550 2.12 43% 5650 2.87 48% 5750 4.33 50% 5850 5.14 50% S11 Radiation patterns:3D Radiation patterns:2D 2400 2450 2500 2500 5150 5550 5850 Active date TRPTIS 2G 11B-11M 116.66-71.09 616.35-73.79 1116.71-72.53 2G 11G-54M 112.43-54.38 616.82-56.02 1113.08-56.31 2G 11A-54M 3617.49-61.83 14918.16-73.44 16521.21-74.94 S21(主天线-副天线) FILE: 6 5 4 3 2 NO DRAWING CHECKED APPROVED SHEET: 1/1 UNIT REV mm X1 DESCRIPTION CUSTOMER: PART NO: Z&X P/NO: PART NAME: 1 A B C DE 5 6 Q'TY REMARK 2 3 4 1 F REV DATE DESCRIPTION G CUSTOMER'S SINGATURE X1 New Issue 08/16-2024 .XX ±0.2 ±0.3 ±0.5 ±1.0 ±2.0 .X X. XX. XXX. 2.4G&5G WiFi Signal Plus Technology Co.,Ltd. 上海增信电子有限公司 1 2 Antenna FPC board,Black solder resist ink 1 1 Cable 1.13 Coaxial cable;Color:White 6241F00050 502-1-0643-X1 3 1 Connector IPEX-4 compatible;Gold-Plated 0.23±0.05 此处焊接 1.ELECTRICAL PROPERTIES： 1.1 Frequency Range.......2.4~2.5&5.15~5.85GHz 1.2 Impendance..............50 Ohm Nominal 2.These Products are in conformity with ROHS2.0 3.Strict size is marked with "*",and () for reference. *150±5 *26.2±0.2 *9.8±0.2 天线标识 焊接时 端子朝向依图 允许转动±75° 1 2 3 0643-X1-AUX 2.AntennaSolution 3.RF matchingcircuitfor differentantennas IC0欧姆 N/A N/A Ant 1~2 Data Preview Freq Gain Effi (MHz) (dBi) (%) 2400 5.57 51% 2450 5.86 52% 2500 5.48 50% 5150 1.14 39% 5250 1.64 51% 5350 2.82 56% 5450 2.29 50% 5550 3.27 57% 5650 4.08 63% 5750 4.18 62% 5850 4.25 63% Radiation patterns:3D Radiation patterns:2D 2400 2450 2500 5150 5550 5850 Active date TRPTIS 2G 11B-11M 116.66-71.09 616.35-73.79 1116.71-72.53 2G 11G-54M 112.43-54.38 616.82-56.02 1113.08-56.31 2G 11A-54M 3617.49-61.83 14918.16-73.44 16521.21-74.94 S21(主天线-副天线)

Report No.: ET-26041609E03 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd. TEST REPORT Applicant: Shenzhen Weijingnake Technology Co., Ltd. Address of Applicant: Room 2209, AGI Cloud Tower, Unit 1, Heping Times Square, Heping Road, Qinghua Community, Longhua Subdistrict, Longhua District, Shenzhen City China Manufacturer: Hubei Yingzhong Information Technology Co., Ltd. Address of Manufacturer: 88 Chongli Road, High-tech Development Zone, Xiaogan City, Hubei Province Product Name: MINI PC Model No.: AT100,AT101,AT102,AT104,AT105,AT106,AT107,AT108,AT109,AT110, AT111,AT112,AT113,AT114,AT115,AT103 Trade Mark: N/A FCC ID: 2BQGQ-AT100 Applicable standards: FCC CFR Title 47 Part 15 Subpart E Section 15.407 Date of Test: Apr.21, 2025- Apr.28, 2026 Date of report issued: Apr.29, 2026 Remark: The results shown in this test report refer only to the sample(s) tested , this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 89 Report No.: ET-26041609E03 Tel:(86-0755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-26041609E03 Original Apr.29, 2026 - Page 3 of 89 Report No.: ET-26041609E03 Tel:(86-0755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1 TEST SUMMARY ......................................................................................................................................4 1.1 MEASUREMENT UNCERTAINTY .............................................................................................................4 2 GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT ..........................................................................................................5 2.2 TEST MODE .........................................................................................................................................7 2.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................8 2.4 TEST FACILITY ....................................................................................................................................8 2.5 ADDITIONAL INSTRUCTIONS ..................................................................................................................8 3 TEST INSTRUMENTS LIST ......................................................................................................................9 4 TEST RESULTS AND MEASUREMENT DATA .....................................................................................10 4.1 ANTENNA REQUIREMENT ....................................................................................................................10 4.2 CONDUCTED EMISSIONS ....................................................................................................................11 4.3 DUTY CYCLE ......................................................................................................................................14 4.4 CONDUCTED OUTPUT POWER ............................................................................................................18 4.5 OCCUPY BANDWIDTH ........................................................................................................................20 4.6 BAND EDGE .......................................................................................................................................53 4.6.1 Conducted test Method ...............................................................................................................53 4.6.2 Radiated test Method ..................................................................................................................68 4.7 SPURIOUS EMISSION .........................................................................................................................79 4.7.1 Radiated Emission Method .........................................................................................................79 5 TEST SETUP PHOTO .............................................................................................................................89 6 EUT CONSTRUCTIONAL DETAILS .......................................................................................................89 - Page 4 of 89 Report No.: ET-26041609E03 Tel:(86-0755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 1 Test Summary Test Item Section in CFR 47 Result Test by Antenna requirement 47CFR part 15.203 Pass / AC Power Line Conducted Emission 47CFR part 15.207 Pass Jason Huang Conducted Output Power 47CFR part 15.407 (a)(1)/(a)(3) Pass Kara Wu 26dB Bandwidth 47CFR part 15.407 (a)(12) Pass Kara Wu 6dB Bandwidth 47CFR part 15.407 (e) Pass Kara Wu Power Spectral Density 47CFR part 15.407(a)(1)/(a)(3) Pass Kara Wu Band Edge 47CFR part 15.407(b)(1)/(b)(4) Pass Kara Wu Spurious Emission 47CFR part 15.205/15.209 47CFR part 15.407(b)(1)/(b)(4)/(b)(8) Pass Jason Hua…

Text truncated - open the document above for the full version.