2BQGR-AMPLAYERG2400W MEDIA PLAYER AMPLIFIER

The installation of this product must be carried out by a qualified professional. Instruction manual 01 Index Introduction Please read this manual carefully before connecting or using the product. In case of doubts, please contact our technical support: (18) 3266-4050 or www.taramps.com.br. Congratulations on purchasing AMPLAYER G2! The AMPLAYER G2 stands out not only for its performance, but also for its appearance. Its innovative design is complemented by a front lighting system with seven vibrant colors, allowing you to customize your car’s ambience. Power and style for your vehicle. The AMPLAYER G2 is not only a car player, it is an integrated entertainment system that combines power, technology, innovative design, and versatility. This product includes a remote control, player, amplifier, and an RGB control module for LED strips or strobe lighting. With 4 amplified channels of 100 Watts RMS, the AMPLAYER G2 delivers a sound quality. Package contents • 01 Remote control • 02 Removal Key• 01 Metal installation frame • 01 AMPLAYER • 02 Wiring Harness • 01 Taramps brand cord 02 • Safety Requirements • Package Contents 01 • Introduction • Safety 03 • Panel functions • Important Recommendations 09 • Car dashboard installation 07 • Remote control functions 04 / 05 / 06 • Panel functions (Cont’d) 08 • Output and power connector • AMPLAYER cleaning 13 • Technical specications • Bridge connection example 12 • Bluetooth • SYNC another remote control • Recommended wire gauge and fuse 11 • Stereo connection example 10 •Installation • Head unit • Remote control 15 • Warranty terms 14 • Declaration on conformity • Technical assistance • FCC Warning Safety precautions Safety Throughout this manual, pay attention to the safety symbols. Taramps reserves the right to modify the contents of this manual without prior notice and without any obligation to apply such modications to units previously manufactured. This symbol as ‘’Caution’’ is intended to alert the user to important instructions. Failure to follow the instructions may result in risks to the user or damage to the product. Caution As protection, a fuse (20A) must be installed near the positive terminal of the battery. See more details on page 10 of this manual. This product incorporates a high power Class D amplifier, which may degrade the reception of distant FM stations. To achieve the best FM reception, avoid routing the antenna cable together with the product’s installation wiring. The recommended wire gauge is 4mm² for the positive/negative wires and 0,75mm² for the remote and ACC wire. LED strips may also interfere with radio, depending on the lighting effect, the chosen color, or the installation location. Important information 02 - Make sure the AMPLAYER is turned OFF before proceeding with any connection or disconnection of its connectors. - Make sure to install a protective fuse or circuit breaker near the battery. Follow the amperage specified in this manual. Using an incorrect fuse or circuit breaker may result in overheating, smoke, product damage, injury, or burns. - If you wish to dispose of this product, do not throw it in household waste. It must be collected by an electronic waste disposal service for proper recycling. - Never install the AMPLAYER in locations exposed to moisture, or water. Make sure to install it away from the fuel tank, fuel lines, heat sources, and other parts of the vehicle. - Avoid routing wires over or through sharp edges. Use rubber or plastic grommets to protect any wires that pass through the vehicle’s bodywork. - The installation of this product must be carried out by a qualified professional. -During use, the external surface may become hot. Avoid touching the heat sink area and keep children away from the product. - This product must be used with 12V batteries. Always check the voltage before installation. - Use safety glasses, insulated gloves, and the proper tools to install this product. - To ensure proper use, read this manual before using the AMPLAYER. It is important that you are aware of the PRECAUTIONS contained herein. - Before making any connection to the AMPLAYER, disconnect the negative (-) terminal of the battery. - This product can produce high sound pressure levels. Avoid continuous exposure to levels above 85dB to prevent hearing loss. 1 - Rotary knob: Volume: Increases or decreases the audio volume. Function adjustment: Access the functions by pressing the center of the knob. To adjust a function, simply rotate the knob to the right or left. BASS: Bass adjustment, allowing boost or attenuation of up to 7dB; TRE: Treble adjustment, allowing or attenuation of up to 7dB; BAL: Balance adjustment, distributes the signals between the left and right channels ; FAD: Fader adjustment, distributes the signals between the front and rear channels; LOUD: Activates the loudness function; Colors: 2 - Mic: Hands free microphone. 3 - LCD Display: Displays FM radio frequency, track/folder number, signal source, song title, functions... capacity is 32GB). DSP: Accesses the 7 band graphic equalizer (60Hz, 250Hz, 500Hz, 1KHz, 2KHz, 10KHz, 15KHz) with boost or attenuation of up to 7dB. 5 - USB: USB input for connecting a flash drive containing music files (max. recomended EQ: Provides 6 equalization curves: Flat/Rock/Pop/Classic/Jazz/User (DPS); 4 - Aux: Auxiliary J2 input for connecting another device (Ex.: Smartphones). Click 03 Panel functions 132 5 4 BASSTREBALFADLOUDEQDSP LOC / DX COLORS MONO / ST FM RADIO MODE ONLY *DSP RST: Resets the equalization values to zero. BLUEGREEN RED YELLOWPURPLE CYAN WHITE AUTOMÁTICA 60Hz250Hz500Hz 1KHz 2KHz 10KHz 15KHzDSP RST * DSP Adjustment 10 - BAND/ANSWER/SEARCH: USB / SD Short press: Switch between FM1/FM2/FM3, each option with 6 present stations. FM RADIO USB / SD CARD Long Press: Fast Forward. BLUETOOTH: Short Press: Numeric track search function using the rotary encoder. Short Press: Answers incoming calls, redials the last number. Long Press: Performs an a…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Taramps Electronics Ltda. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03‐04‐2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BQGR‐AMPLAYERG2 Taramps Electronics Ltda. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Taramps Electronics Ltda. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti‐virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti‐virus software pursuant to DA‐24‐886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end‐user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) Paulo Hodlich Rev 1/26/2023 Taramps Electronics Ltda. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03‐04‐2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BQGR‐AMPLAYERG2 Taramps Electronics Ltda. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) Paulo Hodlich

Taramps Electronics Ltda. Date: 2026-03-04 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BQGR-AMPLAYERG2 To Whom It May Concern: This letter is to statement that AMPLAYER G2/400W MEDIA PLAYER AMPLIFIER. has been tested according to FCC Part 15B by Waltek Testing Group Co., Ltd. (Test Report No.: WTF25D11308789W001). And the SDOC file, meetting the requirements of the FCC regulations, would been provided when the device is sold by the responsible party in US. The service will not be sold until the SDOC is provided. If the sale does not have an SDOC, all responsibility is the responsibility of the applicant. Sincerely, Signature Paulo Hodlich Product Engineering Taramps Electronics Ltda.

Taramps Electronics Ltda. Rod. Julio Budisk, 0-Km 30-Bairro da Pedreira Alfredo Marcondes, SP 19180-000 Brazil Date: 04-28-2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BQGR-AMPLAYERG2 FRN: 0037190857 US Agent – Attestation Statement / Part 2.911(d)(7) Taramps Electronics Ltda. certifies, that as of 04-28-2026, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BQGR-AMPLAYERG2 Taramps Electronics Ltda., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Taramps Electronics Ltda. for FCC ID: 2BQGR-AMPLAYERG2. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Taramps Electronics Ltda. Designated Agent: FCC US Agent, LLC Company Representative: Paulo Hodlich Designated Agent Representative: Tim Payne Signature: Signature:

Taramps Electronics Ltda. Date: Mar. 04, 2026 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BQGR-AMPLAYERG2 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Long-term confidentiality: Schematics Block Diagram Operational Description Schematics.pdf Block Diagram.pdf Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Taramps Electronics Ltda. Signature Paulo Hodlich / Product Engineering

Taramps Electronics Ltda. FCC ID: 2BQGR-AMPLAYERG2 POWER OF ATTORNEY Date: Mar. 04, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group Co., Ltd. (Deval Qin) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group Co., Ltd. (Deval Qin) on our behalf shall have the same effect as acts of our own. This authorization expires on Mar. 03, 2027. Sincerely, Taramps Electronics Ltda. Signature Paulo Hodlich / Product Engineering

Appendix- AMPLAYER G2-Photos FCC ID: 2BQGR-AMPLAYERG2 Reference No.: WTF25D11308789WPage 3 of 10 2. Photographs –Constructional Details 2.1. EUT – External View Appendix- AMPLAYER G2-Photos FCC ID: 2BQGR-AMPLAYERG2 Reference No.: WTF25D11308789WPage 4 of 10 Appendix- AMPLAYER G2-Photos FCC ID: 2BQGR-AMPLAYERG2 Reference No.: WTF25D11308789WPage 5 of 10 Appendix- AMPLAYER G2-Photos FCC ID: 2BQGR-AMPLAYERG2 Reference No.: WTF25D11308789WPage 6 of 10

Appendix- AMPLAYER G2-Photos FCC ID: 2BQGR-AMPLAYERG2 Reference No.: WTF25D11308789WPage 7 of 10 2.2. EUT – Internal View Appendix- AMPLAYER G2-Photos FCC ID: 2BQGR-AMPLAYERG2 Reference No.: WTF25D11308789WPage 8 of 10 433M RX ANT Appendix- AMPLAYER G2-Photos FCC ID: 2BQGR-AMPLAYERG2 Reference No.: WTF25D11308789WPage 9 of 10 Appendix- AMPLAYER G2-Photos FCC ID: 2BQGR-AMPLAYERG2 Reference No.: WTF25D11308789WPage 10 of 10 . ======End====== BT ANT

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 8 TEST REPORT Reference No. .................... : WTF25D11308789W003 FCC ID ................................ : 2BQGR-AMPLAYERG2 Applicant ............................ : Taramps Electronics Ltda. Address .............................. : Rod. Julio Budisk, 0-Km 30-Bairro da Pedreira, Alfredo Marcondes, SP Brazil Manufacturer .................... : Taramps Electronics Ltda. Address .............................. : Rod. Julio Budisk, 0-Km 30-Bairro da Pedreira, Alfredo Marcondes, SP Brazil Product ............................... : 400W MEDIA PLAYER AMPLIFIER Model(s). ............................ : AMPLAYER G2 Standards........................... : FCC 47CFR Part 2 Subpart J Section 2.1091 Date of Receipt Sample .... : 2025-12-03 Date of Test........................ : 2025-12-09 to 2026-04-28 Date of Issue ...................... : 2026-04-29 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Estel Qian / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTF25D11308789W003 Page 2 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2. Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2. CONTENTS ............................................................................................................................................... 2 3. REVISION HISTORY................................................................................................................................. 3 4. GENERAL INFORMATION ....................................................................................................................... 4 4.1. GENERAL DESCRIPTION OF E.U.T. .................................................................................................. 4 4.2. DETAILS OF E.U.T. ......................................................................................................................... 4 4.3. TEST FACILITY ................................................................................................................................ 5 4.4. SUBCONTRACTED ........................................................................................................................... 5 4.5. ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................ 5 5. TEST SUMMARY ...................................................................................................................................... 6 6. RF EXPOSURE ......................................................................................................................................... 7 6.1. REQUIREMENTS .............................................................................................................................. 7 6.2. THE PROCEDURES / LIMIT ................................................................................................................ 7 6.3. MPE CALCULATION METHOD........................................................................................................... 8 6.4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ................................................................... 8 Reference No.: WTF25D11308789W003 Page 3 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 3. Revision History Test Report No. Date of Receipt Sample Date of Test Date of Issue Purpose Comment Approved WTF25D11308789W003 2025-12-03 2025-12-09 to 2026-04-28 2026-04-29 Original - Valid Reference No.: WTF25D11308789W003 Page 4 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4. General Information 4.1. General Description of E.U.T. Product: 400W MEDIA PLAYER AMPLIFIER Model(s): AMPLAYER G2 Model Description: N/A Test Sample No.: 1-1/1 Bluetooth Version: 5.3 Hardware Version: Rev 2.0 Software Version: Rev 1104 4.2. Details of E.U.T. Operation Frequency: 2402~2480MHz Max. RF output power: 4.09dBm Modulation Technology: GFSK, π/4DQPSK, 8DPSK Antenna installation: PCB Antenna Antenna Gain: 5.3dBi Note: #: The antenna gain is provided by the applicant, and the applicant should be responsible for its authenticity, WALTEK lab has not verified the authenticity of its information. Ratings: DC 12V Reference No.: WTF25D11308789W003 Page 5 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4.3. Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0013. Test Firm Registration No.: 7760A. Waltek Testing Group Co., Ltd. Has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration number 7760A, October 15, 2016. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. Waltek Testing Group Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration number 523476, September 10, 2019. 4.4. Subcontracted Whether parts of tests for the product have been subcontracted to other labs: Yes No If Yes, list the related test items and lab information: Test Lab: N/A Lab address: N/A Test items: N/A 4.5. Abnormalities from Standard Conditions None. Reference No.: WTF25D11308789W003 Page 6 of 8 Waltek Testing Group C…

Text truncated - open the document above for the full version.

Application Note AN043 Small Size 2.4 GHz PCB antenna By Audun Andersen 1 KEYWORDS • CC25xx • CC24xx • CC2480 • PCB antenna • USB dongle • 2.4 GHz • Inverted F Antenna 2 INTRODUCTION The PCB antenna used on the CC2511 USB dongle reference design is described in this application note. Even if the antenna presented is for a USB dongle design it can be used in all 2.4 GHz designs, especially where small space is required for the antenna. This application note describes the antenna dimensions, the RF performance and considerations for complying with regulatory limits when using this design. The suggested antenna design requires no more than 15.2 x 5.7 mm of space and ensures a VSWR ratio of less than 2 across the 2.4 GHz ISM band when connected to a 50 ohm source. Figure 1: CC2511 USB Dongle SWRA117D Page 1 of 21 Application Note AN043 Table of Contents 1 KEYWORDS...................................................................................................................1 2 INTRODUCTION.............................................................................................................1 3 ABBREVIATIONS...........................................................................................................2 4 ANTENNA DESIGN........................................................................................................3 4.1 DESIGN GOALS..........................................................................................................3 4.2 SIMULATION...............................................................................................................3 4.3 LAYOUT AND IMPLEMENTATION...................................................................................4 5 TEST RESULTS.............................................................................................................5 5.1 REFLECTION..............................................................................................................5 5.2 RADIATION PATTERN..................................................................................................7 5.3 OUTPUT POWER......................................................................................................15 5.4 SPURIOUS EMISSION AND HARMONICS......................................................................17 6 CONCLUSION ..............................................................................................................20 7 GENERAL INFORMATION..........................................................................................21 7.1 DOCUMENT HISTORY................................................................................................21 3 ABBREVIATIONS CAD Computer Aided Design CC24xx CC2400, CC2420, CC2430 and CC2431 CC25xx CC2500, CC2510, CC2511, CC2550 and CC2520 CC2480 Z-Accel ZigBee Processor IFA Inverted F Antenna ISM Industrial, Scientific and Medical LOS Line Of Sight PCB Printed Circuit Board PER Packet Error Rate VSWR Voltage Standing Wave Ratio SWRA117D Page 2 of 21 Application Note AN043 4 ANTENNA DESIGN The PCB antenna on the CC2511 USB dongle reference design is a meandered Inverted F Antenna (IFA). The IFA was designed to match an impedance of 50 ohm at 2.45 GHz. Thus no additional matching components are necessary. 4.1 Design Goals The reflection at the feed point of the antenna determines how much of the applied power is delivered to the antenna. A reflection of less than -10 dB across the 2.4 GHz ISM band, when connected to a 50 ohm source, was a design goal. Reflection of less than -10 dB, or VSWR less than 2, ensures that more than 90% of the available power is delivered to the antenna. Bandwidth is in this document defined as the frequency band where more than 90% of the available power is delivered to the antenna. Another design goal was to fit the size of the PCB antenna on a USB dongle and to obtain good performance also when the dongle is connected to a computer. 4.2 Simulation IE3D from Zeland, which is an electromagnetic simulation tool, was used to design the antenna. The accuracy of the simulation is controlled by the mesh. An increase of the mesh increases the simulation time. Thus, for initial simulations mesh = 1 should be used. When a fairly good result is achieved a higher mesh should be used to obtain more accurate results. Comparison of simulation and measurement results shows that the measured reflection is between the result obtained with mesh = 5 and mesh = 1; see Figure 2 for details. Figure 2: Comparison of Simulation and Measurements Results SWRA117D Page 3 of 21 Application Note AN043 4.3 Layout and Implementation Small changes of the antenna dimensions may have large impact on the performance. Therefore it is strongly recommended to make an exact copy of the reference design to achieve optimum performance. The easiest way to implement the antenna is to import the gerber or DXF file showing the antenna layout. These files are named IFA_USB.spl and IFA_USB.dxf respectively and are included in the CC2511 USB dongle reference design available from http://www.ti.com\lpw. The imported file can be used as a template when drawing the antenna. By using this procedure it should be possible to make an exact copy. If the PCB CAD tool being used does not support import of DXF or gerber files, Figure 3 and Table 1 should be used to ensure correct implementation. It is recommended to generate a gerber file for comparison with IFA_USB.spl when making a manual implementation. Most gerber viewers have the possibility to import several gerber files at the same time. Thus by placing the gerber file, showing the manually implemented antenna, on top of IFA_USB.spl it is easy to verify that the antenna is correctly implemented. It is also recommended to use the same thickness and type of PCB material as used in the reference design. Information about the PCB can be found in a separate readme file included in the reference design. To compensate for a thicker/thinner P…

Text truncated - open the document above for the full version.

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 75 TEST REPORT Re ference No. .................... : WTF25D11308789W002 FCC ID ................................ : 2BQGR-AMPLAYERG2 Applicant ............................ : Taramps Electronics Ltda. Address .............................. : Rod. Julio Budisk, 0-Km 30-Bairro da Pedreira, Alfredo Marcondes, SP Brazil Manufacturer .................... : Taramps Electronics Ltda. Address .............................. : Rod. Julio Budisk, 0-Km 30-Bairro da Pedreira, Alfredo Marcondes, SP Brazil Product ............................... : 400W MEDIA PLAYER AMPLIFIER Model(s). ............................ : AMPLAYER G2 Standards........................... : FCC 47CFR Part 15.247 Date of Receipt Sample .... : 2025-12-03 Date of Test ....................... : 2025-12-09 to 2026-04-28 Date of Issue ...................... : 2026-04-29 Test Result ......................... : Pass Remarks: The res ults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Estel Qian / Pro ject Engineer Deval Qin / Designated Reviewer Reference No.: WTF25D11308789W002 Page 2 of 75 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 4 4 GENERAL INFORMATION ....................................................................................................................... 5 4.1 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................... 5 4.2 DETAILS OF E.U.T. .............................................................................................................................. 5 4.3 CHANNEL LIST ..................................................................................................................................... 6 4.4 TEST MODE ........................................................................................................................................ 6 4.5 TEST FACILITY .................................................................................................................................... 7 5 TEST SUMMARY ...................................................................................................................................... 8 6 EQUIPMENT USED DURING TEST ......................................................................................................... 9 6.1 EQUIPMENTS LIST ............................................................................................................................... 9 6.2 DESCRIPTION OF SUPPORT UNITS ...................................................................................................... 10 6.3 MEASUREMENT UNCERTAINTY ........................................................................................................... 10 7 RADIATED SPURIOUS EMISSIONS ..................................................................................................... 11 7.1 EUT OPERATION ............................................................................................................................... 11 7.2 TEST SETUP ..................................................................................................................................... 12 7.3 SPECTRUM ANALYZER SETUP ............................................................................................................ 13 7.4 TEST PROCEDURE ............................................................................................................................. 1 4 7.5 CORRECTED AMPLITUDE & MARGIN CALCULATION .............................................................................. 14 7.6 SUMMARY OF TEST RESULTS ............................................................................................................. 15 8 CONDUCTED SPURIOUS EMISSIONS ................................................................................................. 18 8.1 TEST PROCEDURE ............................................................................................................................. 1 8 8.2 TEST RESULT .................................................................................................................................... 19 9 BAND EDGE MEASUREMENT ...........................................................................................................…

Text truncated - open the document above for the full version.