2BQI3-L805SMART GLASSES

Smartglasses UsageGuidelines Precautions  Do not charge in a humid or wet place  Do not use high-power chargers for charging; use a standard 5V/1A charger and the charging cable that comes with this product.  This product is prohibited from being soaked in water. Please wipe it clean immediately after being exposed to rain or water.  The material of this product is relatively soft, please handle it with care and do not drop it.  This product has video and photo functions. Please clean the camera lens and foreign matter on the surface in time to avoid affecting the photo effect.  The lenses of this product (smart glasses) can be replaced. You can go to a local optical shop to replace the lenses according to your needs. This product supports photo and video recording functions. Please strictly comply with local laws and regulations when using it for covert photography, and use the product responsibly. During photo and video recording, the flash will illuminate. If any issues are detected, please promptly address them. Product Image Connection Instructions 1. This smart glasses is a stand-alone product, and some functions can only be used after connecting to a mobile phone 2. HeyCyan " in the mobile app downloads and install it on your phone. 3. You can scan the QR code to download, install and use it; the QR code is as shown in the picture Key Definition Description Button 1: 1) In the power-off state, press and hold for 3 seconds to start the machine. 2) In the power-on state, press and hold for 5 seconds to turn it off. 3) When the machine is turned on, press and hold for 10 seconds to restore the factory settings (this operation will clear all data on the device, so please use it carefully). 4) In the power-on state, a short press can take pictures, and the flash lights up; Photos are automatically stored in the local memory of the product, and can be imported into the mobile phone by connecting with the APP (directly imported through WiFi). 5) When the phone is turned on, you can quickly press it twice to record, the flash is always on, recording starts, and short press it once to end recording. The recorded video Will be automatically stored in the local memory of the product, which can be connected to the APP and imported into the mobile phone (directly through WiFi). The default duration of recording is 3 minutes, which can be set in the APP settings (15S,30S, 60S,3 minutes, 9 minutes, 12 minutes), 9 minutes and 12 minutes of video recording have high power consumption, which will lead to fever and will quickly return to normal after stopping video recording. 6) In the power-on state, press and hold the key for 16 seconds, and the product will be forced to restart. Button 2: 1) In the power-on state, press once to wake up the AI voice assistant. 2) In the power-on state, press it twice quickly to turn on quick map reading. 3) In the power-on state, press the key for a long time to start recording, and press it for a short time during the recording to end the recording (the default recording time is 30min, optional 30min,60min,120min). The recorded audio Will be automatically stored in the local memory of the product, and can be connected to the APP to import into the mobile phone (directly imported through WiFi).  In case of an incoming call, in the Bluetooth connection state, press the key 1 or 2 briefly to answer, and press it once to hang up during the call.  In case of incoming call, in Bluetooth connection state, press and hold the key 1 or 2 for 2 seconds to refuse to answer the call. Touch key 3: 1) In the case of music playing/talking, slide left and right to increase or decrease the volume. 2) When the music is playing, double-click the slide bar to pause the music; In the music pause state, double-click the music playback with the slider. 3) When the music is playing, remove the glasses and pause the music 4) Long press the slider while music is playing to wake up the phone voice assistant 5) When playing music, swipe the slider three times to play the next song APP function usage 1. On the home page, click on the upper right corner (the glasses icon on the right side of the Bluetooth name) to set up my glasses (wearing detection, recording settings, etc.) 2. On the home page, you can click on the glasses function settings to learn, and there are explanation icons 3. In the album interface, you can set up the album; pictures, videos, and recordings - import them on this page Kind tips  When the device is turned on, the indicator light flashes blue, and after the APP is connected, the indicator light goes out; when the device is turned off, the indicator light flashes red and then turns off.  When taking photos and recording videos, the blue indicator light is on and turns off after completion.  During data transmission, the blue indicator light is on and turns off after completion.  During recording, the blue indicator light is on and turns off after completion.  When the battery level is below 15%, the device stops taking photos and recording videos.  Because it is a smart product, the software will be updated regularly and the APP will prompt you; If the battery level is below 15%, the upgrade cannot be performed. You can resume using it after charging.  When the battery level is below 20%, the device will stop data transmission and can be resumed after charging.  This product supports WiFi transmission, which requires the mobile phone to be connected to the APP  The power consumption is high during recording and data transmission. Long-term recording and data transmission will cause heating. It will quickly return to normal after stopping recording and data transmission.  After the Android phone is connected and paired with the APP, go to --- "Phone Settings" --- "Bluetooth" --- find the paired glasses ID (settings icon on the right ) and turn on the "Turn on Bluetooth device volume synchronization with phone" switch, and the volume can be synchronize…

Text truncated - open the document above for the full version.

LocalRepresentativeLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(7),oftheCommission’sRules(47C.F.R.)weattestasfollowsfor theproductlistedbelow: FCCIDModelname 2BQI3-L805L805 Weherebyacknowledgeasfollows: i.bothsigneesconfirmthatthepointofcontactacceptsresponsibilitytoactasaUS- AmericanRepresentativeonbehalfoftheapplicant ii.thepointofcontactprovidesthephysicalU.S.addressandemailaslistedbelow iii.bothpartiesmaintaintherequirementsofthisagreementfornolessthanoneyear afterthegranteehasterminatedallmarketingandimportationortheconclusionof anyCommission-relatedproceedinginvolvingtheequipment. iv.Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,the granteeisobligatedtonotifytheFCCwithin30daysviathegrantingTCB. US-AmericanPointofContactApplicant/ApprovalHolder SignatureDate:2026-4-10SignatureDate:2026-4-10 CompanyName:GLOCERTSTECHNOLOGYINCShenzhenmiduintelligent technologyco.,ltd FRN:00363397370037200623 ContactName:HuiyingFanRONGZHOU Address:19784SUNKISSEDRIDGEDR, RIVERSIDE,CA92507UnitedStates Room318,No.2TianqianRoad, XinheCommunity,Fucheng Street,LonghuaDistrict, ShenzhenChina Phone:(626)588-803913302944285 Email:[email protected]@qq.com

Page1of4FCCID: 2BQI3-L805 GuangdongAsiaHongkeTestTechnologyLimited B1/F,Building11,JunfengIndustrialPark,ChongqingRoad,HepingCommunity,FuhaiStreet,Bao'anDistrict,Shenzhen, Guangdong,China ExternalPhotos Photo1 Photo2 Page2of4FCCID: 2BQI3-L805 GuangdongAsiaHongkeTestTechnologyLimited B1/F,Building11,JunfengIndustrialPark,ChongqingRoad,HepingCommunity,FuhaiStreet,Bao'anDistrict,Shenzhen, Guangdong,China Photo3 Photo4 Page3of4FCCID: 2BQI3-L805 GuangdongAsiaHongkeTestTechnologyLimited B1/F,Building11,JunfengIndustrialPark,ChongqingRoad,HepingCommunity,FuhaiStreet,Bao'anDistrict,Shenzhen, Guangdong,China Photo5 Photo6 Page4of4FCCID: 2BQI3-L805 GuangdongAsiaHongkeTestTechnologyLimited B1/F,Building11,JunfengIndustrialPark,ChongqingRoad,HepingCommunity,FuhaiStreet,Bao'anDistrict,Shenzhen, Guangdong,China Photo7 ------End------

Label FCCID:2BQI3-L805

Page 1 of 3 FCC ID: 2BQI3-L805 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Internal Photos Photo 1 Photo 2 Page 2 of 3 FCC ID: 2BQI3-L805 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Photo 3 Photo 4 BT Antenna WIFI Antenna Page 3 of 3 FCC ID: 2BQI3-L805 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Photo 5 Photo 6 ------End------

Page 1 of 8 Report No.: AiTDG-260319006W3 Note:This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. RF Exposure evaluation Product Name:SMART GLASSES Brand Name:N/A Model:L805 Series Model: L803, L806, L807, L808, L809, L811, L812, L813, L815, L816, L817, L818 FCCID:2BQI3-L805 Applicant: Shenzhen midu intelligent technology co., ltd Address: 503, Building 8, Wanzhongcheng Fashion Creative Park (Shangza spark), Xinshi Community, Dalang Street, Longhua District, Shenzhen City, Guangdong Province Manufacturer: Shenzhen midu intelligent technology co., ltd Address: 503, Building 8, Wanzhongcheng Fashion Creative Park (Shangza spark), Xinshi Community, Dalang Street, Longhua District, Shenzhen City, Guangdong Province Standard(s): 47CFR §1.1310,47CFR §2.1091 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt:Mar. 19, 2026 Date of Test:Mar. 19, 2026~Apr. 01, 2026 Issued Date:Apr. 01, 2026 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 8 Report No.: AiTDG-260319006W2 Report Revise Record Report VersionIssued DateNotes M0Apr. 01, 2026Initial Release Page 3 of 8 Report No.: AiTDG-260319006W2 Contents 1GENERAL INFORMATION........................................................................................................................................4 1.1ENVIRONMENTAL CONDITIONS........................................................................................................................................4 1.2GENERAL DESCRIPTIONOF EUT.......................................................................................................................................4 1.3TEST FACILITY..............................................................................................................................................................5 1.4MEASUREMENT UNCERTAINTY........................................................................................................................................5 2METHOD OF MEASUREMENT..................................................................................................................................6 2.1APPLICABLE STANDARD.................................................................................................................................................6 2.2EVALUATION METHOD AND LIMIT...................................................................................................................................6 2.3MANUFACTURING TOLERANCE.......................................................................................................................................7 2.4EVALUATION RESULT....................................................................................................................................................8 2.5CONCLUSION...............................................................................................................................................................8 Page 4 of 8 Report No.: AiTDG-260319006W2 1GENERAL INFORMATION 1.1Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature:25°C Relative Humidity:55 % Air Pressure:101 kPa 1.2General Descriptionof EUT Product Name: SMART GLASSES Model/Type reference: L805 Serial Model: L803, L806, L807, L808, L809, L811, L812, L813, L815, L816, L817, L818 Model different: All the products are the same except for the model name and color. Everything else is exactly the same. Power Supply: Input: USB-C DC 5.0V Battery: DC 3.8V 290mAh 1.1Wh Hardware Version:N/A SoftwareVersion:N/A Sample(s) Status:AiTDG-260319006-1 2.4G WIFI: Supported type: 802.11b/802.11g /802.11n(HT20) Modulation: 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM Operation frequency:802.11b/802.11g/802.11n(H20): 2412MHz~2462MHz Channel number:802.11b/802.11g/802.11n(H20): 11 Channel separation: 5MHz Antenna type: Wire Antenna Antenna gain: 1 dBi Bluetooth: Supported type: Bluetooth BR/EDR Modulation: GFSK, π/4DQPSK, 8DPSK Operation frequency: 2402MHz~2480MHz Channel number: 79 Channel separation: 1MHz Antenna type: Wire Antenna Antenna gain: 1 dBi Remark: The above DUT's information was declared by manufacturer. For more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Page 5 of 8 Report No.: AiTDG-260319006W2 1.3Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized, certified or accredited by the following organizations: FCC-Registration No.: 251906 Designation Number: CN1376 Guangdong Asia Hongke Test Technology Limited has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our f…

Text truncated - open the document above for the full version.

Page1of38ReportNo.:AiTDG-260319006W1 GuangdongAsiaHongkeTestTechnologyLimited B1/F,Building11,JunfengIndustrialPark,ChongqingRoad,Heping Community,FuhaiStreet,Bao'anDistrict,Shenzhen,Guangdong,China TESTREPORT ClientInformation: Applicant:Shenzhenmiduintelligenttechnologyco.,ltd Applicantadd.: 503,Building8,WanzhongchengFashionCreativePark(Shangzaspark), XinshiCommunity,DalangStreet,LonghuaDistrict,ShenzhenCity, GuangdongProvince Manufacturer:Shenzhenmiduintelligenttechnologyco.,ltd Manufactureradd.: 503,Building8,WanzhongchengFashionCreativePark(Shangzaspark), XinshiCommunity,DalangStreet,LonghuaDistrict,ShenzhenCity, GuangdongProvince ProductInformation: ProductName:SMARTGLASSES ModelNo.:L805 BrandName:N/A FCCID: 2BQI3-L805 Applicablestandards: FCCCFRTitle47Part15SubpartCSection15.247 PreparedBy: GuangdongAsiaHongkeTestTechnologyLimited B1/F,Building11,JunfengIndustrialPark,ChongqingRoad,HepingCommunity,FuhaiStreet,Bao'anDistrict, Shenzhen,Guangdong,China Tel.:+860755-230967639Fax.:+860755-230967639 DateofReceipt:Mar.19,2026DateofTest:Mar.19,2026~Apr.01,2026 DateofIssue:Apr.01,2026TestResult:Pass ThisdevicedescribedabovehasbeentestedbyGuangdongAsiaHongkeTestTechnologyLimited andthetestresultsshowthattheequipmentundertest(EUT)isincompliancewiththeFCC requirements.Anditisapplicableonlytothetestedsampleidentifiedinthereport. Note:Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofGuangdong AsiaHongkeTestTechnologyLimited,thisdocumentmaybealteredorrevisedbyGuangdong AsiaHongkeTestTechnologyLimited,personalonly,andshallbenotedintherevisionofthe document.Thistestreportmustnotbeusedbytheclienttoclaimproductendorsement. Reviewedby:Approvedby: Aalen.YeAllenWang Page2of38ReportNo.:AiTDG-260319006W1 GuangdongAsiaHongkeTestTechnologyLimited B1/F,Building11,JunfengIndustrialPark,ChongqingRoad,Heping Community,FuhaiStreet,Bao'anDistrict,Shenzhen,Guangdong,China 1Contents Page COVERPAGE 1CONTENTS......................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................4 2.1StatementoftheMeasurementUncertainty................................................................................4 2.2MeasurementUncertainty............................................................................................................4 3TESTFACILITY..............................................................................................................................................................5 3.1Deviationfromstandard...............................................................................................................5 3.2Abnormalitiesfromstandardconditions.......................................................................................5 3.3TestLocation.................................................................................................................................5 4GENERALINFORMATION...........................................................................................................................................6 4.1Testfrequencies............................................................................................................................7 4.2EUTPeripheralList.......................................................................................................................8 4.3TestPeripheralList.......................................................................................................................8 4.4TESTMETHODOLOGY...............................................................................................................9 4.5DescriptionofTestModes..........................................................................................................10 5EQUIPMENTUSEDDURINGTEST.........................................................................................................................11 6TESTRESULTSANDMEASUREMENTDATA.....................................................................................................11 6.1Antennarequirement..................................................................................................................13 6.2PeakPowerMeasurement.........................................................................................................14 6.3FrequencySeparationand20dBBandwidth............................................................................15 6.4NumberofHoppingFrequency..................................................................................................17 6.5TimeofOccupancy(DwellTime)...............................................................................................18 6.6ConductedSpuriousEmissionsandBandEdgesTest.............................................................20 6.7Restrict-bandBand-edgeMeasurements..................................................................................22 6.8RadiatedEmissionsMeasurement............................................................................................24 6.9ConductedEmissions.................................................................................................................34 6.10Pseudorandomfrequencyhoppingsequence...........................................................................37 7TESTSETUPPHOTOGRAPHSOFEUT.................................................................................................................38 8EXTERNALPHOTOGRAPHSOFEUT....................................................................................................................38 9INTERNALPHOTOGRAPHSOFEUT.....................................................................................................................38 Page3of38ReportNo.:AiTDG-260319006W1 GuangdongAsiaHongkeTestTechnology…

Text truncated - open the document above for the full version.

ANTENNASPECIFICATION0 CUS P/N ： T2970 ApplicationDate: 20 22-12-9Rev: R:A0 CREDITSP/N :Editor:Page 1 of 7 Index 1.GeneralDescription 1 2.ElectricalSpecifications 2 2-1Set-up 2 2-1 -1 FrequencyBand 2 2-1-2 Impedance 2 2-1-3 MatchingRequirements 2 2-1-4 VSWR 2 2-2TestData 3to4 2-2-1 VSWR 3 2-2-2 TRP&TIS 4 3.MechanicalSpecification 5to7 3-1MechanicalConfiguration 5 3-1-1MechanicalConfiguration 5 3-1-2MechanicalConfiguration 6 3-2MeasurementData 7 3-3Salt-SprayTest 7 4.EnvironmentCharacteristics 7 Manufacturer:Shenzhen midu intelligent technology co., ltd Manufacturer add.:Room 318, No.2 Tianqian Road, Xinhe Community, Fucheng Street, Longhua District, Shenzhen China ANTENNASPECIFICATION0 CUSP/N ： T2970 ApplicationDate:2022-12-9Rev:R:A0 CREDITSP/N:Editor:Page2of7 1.GeneralDescription Thisreportsummarizestheelectricalperformanceresultsoftheproposed InternalantennatosupporttheF12（BT）program.Theantennaisan assemblyBT2.4G. 2. ElectricalSpecifications 2-1 Set-up 2-1-1FrequencyBand FrequencyBandTx(MHz)Rx(MHz) GSM900880~915925~960 DCS18001710~17851805~1880 WIFI2400-2450-2500 2-1-2Impedance NominalImpedance(includingmatchingcircuit):50ohms 2-1-3MatchingRequirements ThematchingcircuitonthePCBofthehandsetisaccordingto Figure1 Optimummatchingcircuitishighlydependentonthehandset andthus. Finalmatchingcircuitlayoutandvalueswillbedefinedwhen handsetisavailable. 客供 2-1-4VSWRAndGAIN VSWRGAIN Freq.BandOPENSPECBandFreq.OPENSPEC ANTENNASPECIFICATION0 CUSP/N ： T2970 ApplicationDate:2022-12-9Rev:R:A0 CREDITSP/N:Editor:Page3of7 2400MHz ≦ 2.5 2400MHz ≧-1.0dBi 2450MHz ≦ 2.0 2450MHz ≧0.5dBi 2500MHz ≦2.0 2500MHz ≧-1.0dBi ※Measuringa50Ωtestjigisconnectedtoanetworkanalyzertomeasure theVSWR ※※Alltestvalueisdoneincustomerapprovalfixture. 2-2TestData 2-2-1BTVSWR ModelNo:File: CREDITSNO: Note: BT-VSWR SampleNo: TestCondition:FreeSpaceMatching:客供 Confirmation:Engineer: ANTENNASPECIFICATION0 CUSP/N ： T2970 ApplicationDate:2022-12-9Rev:R:A0 CREDITSP/N:Editor:Page4of7 2-2-2BTGAIN&EFF ANTENNASPECIFICATION0 CUSP/N ： T2970 ApplicationDate:2022-12-9Rev:R:A0 CREDITSP/N:Editor:Page5of7 ANTENNASPECIFICATION0 CUSP/N ： T2970 ApplicationDate:2022-12-9Rev:R:A0 CREDITSP/N:Editor:Page6of7 ANTENNASPECIFICATION0 CUSP/N ： T2970 ApplicationDate:2022-12-9Rev:R:A0 CREDITSP/N:Editor:Page7of7 3.MechanicalSpecification 3-1-1MechanicalConfiguration(组装图) 3-2MeasurementData 3-3Salt-Spraytest 35°C,85%RH,48Hours(AccordingtoMIL-STD-810E)The salt-sprayisgeneratedfroma5%saltsolution.,TheVSWR, Gain,RadiationPatternmustbemetspecificationsafterthe salt-spraytest. 4.EnvironmentCharacteristic NO.ITEMTESTCONDITIONSPECIFICATION 4-1 HighTemperature/Humidity StorageTest(nonoperating) 1.Temperature:+70±2°C 2.Humidity:90~95%RH 3.Time:48hrs Nomaterialdeformationis allowed. ANTENNASPECIFICATION0 CUSP/N ： T2970 ApplicationDate:2022-12-9Rev:R:A0 CREDITSP/N:Editor:Page8of7 TheVSWR,Gain,Radiation Patternmustbemet specificationsafterthesetest. 4-2 LowTemperature/Humidity StorageTest(nonoperating) 1.Temperature:-30±2°C 2.Humidity:0%RH 3.Time:48hrs

Guangdong Asia Hongke Test Technology Limited Report No.: AiTDG-260319006W1 FCC ID: 2BQI3-L805 Page 1 of 61 Appendix A RF Test Data for BT(BDR/EDR) (Conducted Measurement) Product Name: SMART GLASSES Trade Mark: N/A Test Model: L805 Environmental Conditions Temperature: 24.6  C Relative Humidity:52.4% ATM Pressure:100.0 kPa Test Engineer:Emiya Lin Supervised by:Simba Huang Guangdong Asia Hongke Test Technology Limited Report No.: AiTDG-260319006W1 FCC ID: 2BQI3-L805 Page 2 of 61 Contents Page COVER PAGE 1 Duty Cycle........................................................................................................................................................................................ 3 1.1Test Result............................................................................................................................................................................3 1.2Test Graphs...........................................................................................................................................................................4 2 Maximum Conducted Peak Output Power........................................................................................................................................ 9 2.1Test Result............................................................................................................................................................................9 2.2Test Graphs.........................................................................................................................................................................10 3 20dB Bandwidth..............................................................................................................................................................................15 3.1Test Result..........................................................................................................................................................................15 3.2Test Graphs.........................................................................................................................................................................16 4 Carrier Frequency Separation.........................................................................................................................................................21 4.1Test Result..........................................................................................................................................................................21 4.2Test Graphs.........................................................................................................................................................................22 5 Hopping Channel Number...............................................................................................................................................................24 5.1Test Result..........................................................................................................................................................................24 5.2Test Graphs.........................................................................................................................................................................25 6 Dwell Time...................................................................................................................................................................................... 27 6.1Test Result..........................................................................................................................................................................27 6.2Test Graphs.........................................................................................................................................................................28 7 RF Conducted Spurious Emissions.................................................................................................................................................31 7.1Test Result..........................................................................................................................................................................31 7.2Test Graphs.........................................................................................................................................................................32 8 Band-edge for RF Conducted Emissions........................................................................................................................................41 8.1Test Result..........................................................................................................................................................................41 8.2Test Graphs.........................................................................................................................................................................42 9 Restrict-band band-edge measurements........................................................................................................................................54 9.1Test Result..........................................................................................................................................................................54 9.2Test Graphs.........................................................................................................................................................................56 Guangdong Asia Hongke Test Technology Limited Report No.: AiTDG-260319006W1 FCC ID: 2BQI3-L805 Page 3 of 61 1 Duty Cycle 1.1 Test Result ModeFrequency (MHz)Duty Cycle (%)Correction Factor 1/T (kHz) 1-DH1240231.84.982.56 1-DH1244131.674.992.56 1-DH1248031.814.972.63 2-DH12402324.952.56 2-DH1244132.264.912.56 2-DH12480324.952.56 3-DH1240232.664.862.5 3-DH12441324.952.56 3-DH1248032.634.862.56 Guangdong Asia Hongke Test Technology Limited Report No.: AiTDG…

Text truncated - open the document above for the full version.

Guangdong Asia Hongke Test Technology L…

Text truncated - open the document above for the full version.