2BQML2025FX095G1LTE Module

Rev 1/26/2023 Jiangyin Xinxinzhihuo Technology Co., Ltd. Room 302, Building 1, No. 2 Binjiang West Road, Jiangyin, Jiangsu Province, 214433,China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 28, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BQML2025FX095G1 Jiangyin Xinxinzhihuo Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Jiangyin Xinxinzhihuo Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24- 886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Contact Person: Wang Congliang Jiangyin Xinxinzhihuo Technology Co., Ltd. Tel: +8619951785365 E-mail: [email protected] Rev 1/26/2023 Jiangyin Xinxinzhihuo Technology Co., Ltd. Room 302, Building 1, No. 2 Binjiang West Road, Jiangyin, Jiangsu Province, 214433,China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 28, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BQML2025FX095G1 Jiangyin Xinxinzhihuo Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Contact Person: Wang Congliang Jiangyin Xinxinzhihuo Technology Co., Ltd. Tel: +8619951785365 E-mail: [email protected]

Rev 1/26/2023 Jiangyin Xinxinzhihuo Technology Co., Ltd. Room 302, Building 1, No. 2 Binjiang West Road, Jiangyin, Jiangsu Province, 214433,China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 28, 2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2BQML2025FX095G1 Applicant FRN: 0037227311 Jiangyin Xinxinzhihuo Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, FCC US Agent, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Jiangyin Xinxinzhihuo Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. FCC US Agent, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name:FCC US Agent, LLC U.S. Agent FRN:0033402884 Address:3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Tel.:708-571-3148 Email: [email protected] Sincerely, Jiangyin Xinxinzhihuo Technology Co., Ltd. FCC US Agent, LLC Wang Congliang Tim Payne [Insert Applicant signature] [U.S. Agent signature]

Jiangyin Xinxinzhihuo Technology Co., Ltd. Room 302, Building 1, No. 2 Binjiang West Road, Jiangyin, Jiangsu Province, 214400,China Date: July 30, 2025 Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Subject: Request for Confidentiality FCC ID: 2BQML2025FX095G1 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. ⚫ Schematic Diagram ⚫ Block Diagram ⚫ Operational Description ⚫ Part List ⚫ Tune up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. ◆ External Photos ◆ Internal Photos ◆ Test Setup Photos ◆ Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Contact Person: Wang Congliang Jiangyin Xinxinzhihuo Technology Co., Ltd. Tel: +8619951785365 E-mail: [email protected]

JiangyinXinxinzhihuoTechnologyCo.,Ltd. Room302,Building1,No.2BinjiangWestRoad,Jiangyin,JiangsuProvince,214400,China ModularApprovalRequestFCC(KDB996369D01&Part15.212) FCCID:2BQML2025FX095G1 ItemstobecoveredbySinglemodulartransmitters. Answerfromapplicant 1.ThemodulartransmittermusthaveitsownRFshielding.Theradioportionofthis moduleisshielded. 2.Themodulartransmittermusthavebufferedmodulation/datainputs(ifsuch inputsareprovided)toensurethatthemodulewillcomplywithPart15 requirementsunderconditionsofexcessivedataratesorover-modulation. Themodulehasbuffer modulation/datainputs. 3.Themodulartransmittermusthaveitsownpowersupplyregulation.Themodulehasitsown powersupplyregulation. 4.ThemodulartransmittermustcomplywiththeantennarequirementsofSection 15.203and15.204(b)(c).Theantennamusteitherbepermanentlyattachedor employa“unique”antennacoupler(atallconnectionsbetweenthemoduleand theantenna,includingthecable). Therequirementsofantenna connectorandspurious emissionhavebeenfulfilled. 5.Themodulartransmittermustbetestedinastand-aloneconfiguration,i.e.,the modulemustnotbeinsideanotherdeviceduringtesting.Thisisintendedto demonstratethatthemoduleiscapableofcomplyingwithPart15emission limitsregardlessofthedeviceintowhichitiseventuallyinstalled. Therequiredrulehasbeen fulfilled. 6.Themodulartransmittermustbeequippedwitheitherapermanentlyaffixedlabel ormustbecapableofelectronicallydisplayingitsFCCidentificationnumberin accordancewith15.212(a)(1)(vi)(A)/(B). TheModulewillbelabeled withitsownFCCID,andthe instructiononthelabeling ruleoftheendproducthas beenstatedintheUser Manualofthismodule. 7.Themodulartransmittermustcomplywithanyspecificruleoroperating requirementsapplicabletothetransmitterandthemanufacturermustprovide adequateinstructionsalongwiththemoduletoexplainanysuchrequirements.A copyoftheseinstructionsmustbeincludedintheapplicationforequipment authorization.Forexample,thereareverystrictoperationalandtiming requirementsthatmustbemetbeforeatransmitterisauthorizedforoperation underSection15.231.Forinstance,datatransmissionisprohibited,exceptfor operationunderSection15.231(e),inwhichcasethereareseparatefieldstrength levelandtimingrequirements.Compliancewiththeserequirementsmustbe assured. Therequiredrulehasbeen fulfilledandallthe instructionsformaintaining compliancehavebeenclearly statedintheUserManual. 8.ThemodulartransmittermustcomplywithanyapplicableRFexposure requirements.Forexample,FCCRulesinSections1.1310,2.1091,2.1093,and specificSectionsofPart15,including15.319(i),15.407(f),15.253(f)and 15.255(g),requirethatUnlicensedPCS,UNIIandmillimeterwavedevices performroutineenvironmentalevaluationforRFExposuretodemonstrate compliance.Inaddition,spreadspectrumtransmittersoperatingunderSection 15.247arerequiredtoaddressRFExposurecompliance.Modulartransmitters approvedunderotherSectionsofPart15,whennecessary,mayalsoneedto addresscertainRFExposureconcerns,typicallybyprovidingspecificinstallation andoperatinginstructionsforusers,installersandotherinterestedpartiesto ensurecompliance. Therequiredrulehasbeen fulfilledandallthe instructionsformaintaining compliancehavebeenclearly statedintheUserManual. Ifyoushouldhaveanyquestion(s)regardingthisdeclaration,pleasedon’thesitatetocontactus. Thankyou! ____________ ContactPerson:WangCongliang JiangyinXinxinzhihuoTechnologyCo.,Ltd. Tel:+8619951785365 E-mail:[email protected]

Jiangyin Xinxinzhihuo Technology Co., Ltd. Room 302, Building 1, No. 2 Binjiang West Road, Jiangyin, Jiangsu Province, 214400,China Date: July 30, 2025 Power of Attorney To whom it may concern, Please be notified that I, Wang Congliang, have designated Yuchen Zhao of Huarui 7layers High Technology (Suzhou) Co., Ltd. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Yuchen Zhao of Huarui 7layers High Technology (Suzhou) Co., Ltd. on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.U.S.C. 862, we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act. This authorization is limited to the product of as following: FCC ID: 2BQML2025FX095G1 If you have any acknowledgement and response, please send it to Yuchen Zhao of Huarui 7layers High Technology (Suzhou) Co., Ltd. directly. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, _______________ Contact Person: Wang Congliang Jiangyin Xinxinzhihuo Technology Co., Ltd. Tel: +8619951785365 E-mail: [email protected]

Label Metal shield of the Moduel

Test Report No.: PSU-QSU2506090109EM02 Huarui 7layers High Technology (Suzhou) Co., Ltd. Tower N, Innovation Center, 88 Zuyi Road, High-tech District, Suzhou City, Anhui Province, China Tel: +86 (0557) 368 1008 Page 1 of 23 EMC TEST REPORT Applicant: Jiangyin Xinxinzhihuo Technology Co., Ltd. Address: Room 302, Building 1, No.2, Binjiang West Road, Jiangyin City, China Manufacturer or Supplier: Jiangyin Xinxinzhihuo Technology Co., Ltd. Address: Room 302, Building 1, No.2, Binjiang West Road, Jiangyin City, China Product: LTE Module Brand Name: 芯芯之火 Model Name: FX095-G1 FCC ID: 2BQML2025FX095G1 Date of tests: Jul. 03, 2025 ~ Jul. 11, 2025 The submitted sample of the above equipment has been tested for according to the requirements of the following standards: FCC Part 15, Subpart B, Class A FCC Part 15, Subpart B, Class B ANSI C63.4:2014 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Hanwen Xu Engineer / Mobile Department Approved by Peibo Sun Manager / Mobile Department Date: Jul. 11, 2025 Date: Jul. 11, 2025 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about- us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Test Report No.: PSU-QSU2506090109EM02 Huarui 7layers High Technology (Suzhou) Co., Ltd. Tower N, Innovation Center, 88 Zuyi Road, High-tech District, Suzhou City, Anhui Province, China Tel: +86 (0557) 368 1008 Page 2 of 23 TABLE OF CONTENTS TABLE OF CONTENTS .......................................................................................................................... 2 RELEASE CONTROL RECORD ............................................................................................................ 3 1 GENERAL INFORMATION .............................................................................................................. 4 1.1 GENERAL DESCRIPTION OF EUT ......................................................................................... 4 1.2 SUMMARY OF TEST RESULTS .............................................................................................. 5 1.3 MEASUREMENT UNCERTAINTY ............................................................................................ 6 1.4 DESCRIPTION OF TEST MODES ........................................................................................... 7 1.5 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 8 2 EMISSION TEST .............................................................................................................................. 9 2.1 CONDUCTED EMISSION MEASUREMENT ........................................................................... 9 2.1.1 IMITS OF CONDUCTED EMISSION MEASUREMENT ................................................... 9 2.1.2 TEST INSTRUMENTS ....................................................................................................... 9 2.1.3 TEST PROCEDURES ..................................................................................................... 10 2.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 10 2.1.5 TEST SETUP .................................................................................................................... 11 2.1.6 EUT OPERATING CONDITIONS ..................................................................................... 11 2.1.7 TEST RESULTS .............................................................................................................. 12 2.2 RADIATED EMISSION MEASUREMENT .............................................................................. 14 2.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 14 2.2.2 TEST INSTRUMENTS ..................................................................................................... 15 2.2.3 TEST PROCEDURE ........................................................................................................ 16 2.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 17 2.2.5 TEST SETUP ................................................................................................................... 18 2.2.6 EUT OPERATING CONDITIONS .................................................................................... 18 2.2.7 TEST RESULTS .........................................................................…

Text truncated - open the document above for the full version.