2BQO7-JH25QI 2.2 25W Magnetic Wireless Charger

WIRELESS CHARGER Supports MagSafe and is compatible with phone cases that are 6mm or thinner. Caution On The Compatibility Of Wireless Charging *15W wireless charging: Matters Need Attention *25W Wireless Fast Charging: Applicable models: iPhone 16e and subsequent series (excluding iPhone 16e). For example: New models such as iPhone 16, iPhone 17, etc. Applicable models: iPhone 16e and all previous series (including iPhone 16e). For example: Older models such as iPhone 16e, iPhone 15 Pro Max, and iPhone 15 Pro. Users of the iPhone 16 series are required to update their devices to iOS 26 or a higher version. This will enable the use of Qi 2.2 specification chargers for 25W high-speed charging. Please follow the following steps to confirm the update: "Settings" > "General" > "Software Updates" Common Questions And Solutions *Question: If the charging speed is slow or does not reach 25W, please follow the steps below. Confirmation: 2. Confirmation of Charger Compatibility Please confirm whether your device has been updated to **iOS 26 or a later version. Please ensure that the charger you are using has an output power of 30W or higher, and supports the following charging protocols: The Type-C adapters from mainstream brands such as Apple and Anker are compatible. PleaseAvoid using chargers or power banks that are un-certified or have false specifications marked. 3. Battery power confirmation When the battery level of a smart phone is above 50%, due to the effect of the battery protection function, the charging speed may slow down. This is a normal operating phenomenon. Charging Protocol PD/QC9V0-7.5W (最大) 0-15W (最大) 0-25W (最大) 0-25W (最大) 0-25W (最大) 12V 3.3-16V 3.3-21V 5-20 V PD/QC PPS PPS AVS voltage Wireless charging output 1. Confirmation of iOS system version Package Contents Important Notice 1. Regarding power adapters This product does not come with a power adapter. Please prepare one by yourself. It is recommended to use a power adapter with a capacity of 30W or above that supports Type-C connection, to ensure the best charging performance. 2. Regarding the compatibility of smartphone cases This product can also be used when installing a smartphone case.However, if the thickness of the case increases, the charging speed may decrease. It is recommended to use it in conjunction with an official MagSafe compatible case. When using a case not supported by MagSafe made by another company, the magnetic attraction effect of the magnet may weaken. Please be aware of this. 1 x 25W wireless charger 1 x User Manual 无线充电器 支持MagSafe，可使用厚度6mm以下的手机壳。 使用注意事项 *1.推荐使用高输出充电器 为确保本产品处于最佳状态，请使用30W以上的高 功率充电器。 *2.异物检测功能 本产品搭载异物检测功能。当检测到异物时，将自 动关闭电源，以确保安全。 *3，输入过电流 · 过电压保护功能 *4. 适当的使用环境 *5，产品的清洁方法 *6.保修范围外的注意事项 本产品具备过电流及过电压保护功能。若发生不当 使用，产品可能会自动关闭电源或降低输出功率，请 确认是否存在异常或不当使用情况。 请在 0~25°C的环境温度下使用本产品。请勿在水下、火 源附近、高温 (40°C以上) 或低温 (-20°C以下) 环境中 使用。同时，请将产品存放在儿童无法触及的地方。 清洁产品表面时， 请使用干燥柔软的布。请勿使用化学 品、肥皂或洗涤剂。 因不当使用或保管导致的人身伤害或产品损坏，不 在保修范围内，请知悉。 为确保您能安全舒适地使用本产品，请务必遵守上述注意 事项。 关于无线充电的兼容性 *15W无线充电: 注意事项 *25W 无线快速充电: 适用机型: iPhone 16e及以后的系列 (不包括iIPhone16e) 。 例如: iPhone16、iPhone 17等新款机型。 适用机型: iPhone16e 及其之前系列 (包含 iPhone16e) 。 例如: iPhone16e、iPhone15 Pro Max、iPhone 15Pro等旧款机型。 使用iPhone16系列的用户，需将设备更新至iOS26及 以上版本。由此可支持Qi2.2规格充电器进行25W高速 充电。 请按以下步骤确认更新: “设置” > “通用” > “软件更新” 梱包内容 重要注意事项 *1.关于电源适配器 本产品不附带电源适配器，请您自行准备。 建议使用30W以上支持Type-C的电源适配器 ，以确保最佳充电性能。 *2.关于智能手机壳的兼容性 本产品在安装智能手机外壳的情况下也可使用。 但是，外壳厚度增加时，充电速度可能会降低。 建议与官方MagSafe支持外壳并用。使用其他公 司制造的非MagSafe支持外壳时，磁铁的吸附效 果可能会减弱，请注意。 25W无线充电器x1 用户手册x1 1. It is recommended to use a high-output charger. To ensure that this product is in its best condition, please use a charging device with a power rating of 30W or higher. 2. Foreign Object Detection Function This product is equipped with an object detection function. When an object is detected, the power will be automatically turned off to ensure safety. 3. Input overcurrent and overvoltage protection function 4. Appropriate usage environment 5. Cleaning methods for the product *6. Notes for Exclusions from Warranty Coverage This product is equipped with overcurrent and overvoltage protection functions. In case of improper use, the product may automatically shut off the power supply or reduce the output power. Please confirm whether there is any abnormal or improper usage. Please use this product within the environmental temperature range of 0 to 25°C. Do not use it in water, near an open flame, in a high-temperature environment (above 40°C) or a low-temperature environment (below -20°C). Use. Also, please store the product in a place where children cannot access it. When cleaning the surface, please use a dry and soft cloth. Do not use chemicals, soap or detergents. Personal injuries or product damages caused by improper use or storage are not covered by the warranty. Please be informed of this. To ensure that you can use this product safely and comfortably, please strictly follow the above precautions. 常见问题与对策 *问题:充电速度慢或未达到25W时，请按以下步骤 确认: *2.充电器兼容性确认 请确认您的设备是否已更新至**iOS 26及以上版本。 请确认所使用的充电器具备30W以上输出功率，并支持以下 充电协议: 苹果、Anker等主流品牌的Type-C适配器具有兼容性。 请避免使用未经认证或标注虚假规格的充电器或移动 电源。 *3.电池电量确认 当智能手机电池电量在50%以上时，由于电池保护 功能的作用，充电速度可能会降低。这是正常的 运行现象。 充电协议 PD/QC9V0-7.5W (最大) 0-15W (最大) 0-25W (最大) 0-25W (最大) 0-25W (最大) 12V 3.3-16V 3.3-21V 5-20 V PD/QC PPS PPS AVS 电压无线充电输出 *1.i0S系统版本确认 封面 正面 背面 To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

ShenzhenJinghuaChuangxingTechnologyCo.,Ltd. Address：5thFloor,BuildingA,JinhongIndustrialZone,ShiyanStreet,Bao'anDistrict,Shenzhen China Date:2026-03-06 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2BQO7-JH25 FRN:0037245891 (“ShenzhenJinghuaChuangxingTechnologyCo.,Ltd.”)certifiesthat,asofthedateofthe filingoftheapplication,GOLDENVICTORYINTERNATIONALTRADINGCOLTDisour designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID.(“Shenzhen JinghuaChuangxingTechnologyCo.,Ltd.”)acceptstomaintainanagentfornolessthanone yearafterthegranteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. GOLDENVICTORYINTERNATIONALTRADINGCOLTDaccepts,asofthedateofthefiling oftheapplication,theobligationofthedesignatedU.S.agentforserviceofprocessforthe abovereferencedFCCID. DesignatedU.S.AgentInformation: Name:GOLDENVICTORYINTERNATIONALTRADINGCOLTD Address:11016THSTREETSUITE1400DENVER,CO80202UnitedStates FRN：0036377570 ContactPerson:LeonHowar Tel.:(337)255-0461 Email:[email protected] Sincerely, Signedonbehalfof（ShenzhenJinghua ChuangxingTechnologyCo.,Ltd.） SignedonbehalfofGOLDENVICTORY INTERNATIONALTRADINGCOLTD Name:panzhuliName:LeonHowar Title:ManagerTitle:Manager Date:2026-03-06Date:2026-03-06

Rev1/26/2023 (ShenzhenJinghuaChuangxingTechnologyCo.,Ltd.) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:3-6-2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BQO7-JH25 (“ShenzhenJinghuaChuangxingTechnologyCo.,Ltd.”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. (“ShenzhenJinghuaChuangxingTechnologyCo.,Ltd.”)certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegratedKaspersky Lab,Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24- 886andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature): (Applicantprintedname):panzhuli Rev1/26/2023 (ShenzhenJinghuaChuangxingTechnologyCo.,Ltd.) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:3-6-2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BQO7-JH25 (“ShenzhenJinghuaChuangxingTechnologyCo.,Ltd.”)certifiesthat,asofthedateofthefilingofthe application,ShenzhenJinghuaChuangxingTechnologyCo.,Ltd.isnotidentifiedontheCoveredList(asa specificallynamedentityoranyofitssubsidiariesoraffiliates)asanentityproducing“covered” equipment. Sincerely, (Applicantsignature): (Applicantprintedname):panzhuli

ShenzhenJinghuaChuangxingTechnologyCo.,Ltd. Date:March9,2026 ProductModelNumber:JH25,SH-5005,GW-0589,MG-9073 FCCID:2BQO7-JH25 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:13751155056 Onbehalfof:ShenzhenJinghuaChuangxingTechnologyCo.,Ltd.

ShenzhenJinghuaChuangxingTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:March6,2026 Subject;RequestforConfidentiality FCCID:2BQO7-JH25 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:panzhuli Title:Manager

ShenzhenJinghuaChuangxingTechnologyCo.,Ltd. ModelDifference Date:March11,2026 Productdescription:QI2.225WMagneticWirelessCharger Modelname:JH25,SH-5005,GW-0589,MG-9073 FCCID:2BQO7-JH25 JH25isthetestmodel,whileothermodelsarederivativemodels.Thesemodelsare thesameonthecircuit,onlywithdifferentmodelnamesandLengthofcharging cable.Therefore,thetestdataofJH25canrepresenttheremainingmodels. Client’ssignature: Client’sname/title:panzhuli/Manager Contactinformation/address:5thFloor,BuildingA,JinhongIndustrialZone,Shiyan Street,Bao'anDistrict,ShenzhenChina

FCCID:2BQO7-JH25 EUTPHOTOSExternalPhotos FCCID:2BQO7-JH25 FCCID:2BQO7-JH25 FCCID:2BQO7-JH25 ※※※※※ENDOFREPORT※※※※※

Size:5mmX25mm FCCID：2BQO7-JH25

FCCID:2BQO7-JH25 EUTPHOTOSInternalPhotos FCCID:2BQO7-JH25 FCCID:2BQO7-JH25 FCCID:2BQO7-JH25 ※※※※※ENDOFREPORT※※※※※ PhoneANT

ProjectNo.:ZHT-260126107W02-2 Page 1 of 11 RFExposureEvaluation FCCID:2BQO7-JH25 ApplicantName...............: ShenzhenJinghuaChuangxingTechnologyCo.,Ltd. Address............................: 5thFloor,BuildingA,JinhongIndustrialZone,ShiyanStreet,Bao'an District,ShenzhenChina ManufacturerName.........: ShenzhenJinghuaChuangxingTechnologyCo.,Ltd. Address............................: 5thFloor,BuildingA,JinhongIndustrialZone,ShiyanStreet,Bao'an District,ShenzhenChina Product............................: QI2.225WMagneticWirelessCharger Model(s)...........................: JH25 AdditionalModel(s)..........: SH-5005,GW-0589,MG-9073 Trademark.......................: JH ModelDifference..............: JH25isthetestmodel,whileothermodelsarederivativemodels.These modelsarethesameonthecircuit,onlywithdifferentmodelnamesand Lengthofchargingcable.Therefore,thetestdataofJH25canrepresentthe remainingmodels. Preparedby.....................: GuangdongZhonghanTestingTechnologyCo.,Ltd. Address............................: Room104/201,Building1,YibaolaiIndustrialPark,Qiaotou,Fuhai Subdistrict,Bao'anDistrict,Shenzhen,Guangdong,China DateofReceipt................: Jan.26,2026 DateofTest(s).................: Jan.26,2026toFeb.25,2026 DateofIssue....................: Feb.25,2026 TestRequested...............:Selecttest(s)asrequestedbytheclient. TestStandard(s)..............:KDB680106D01WirelessPowerTransferv04 Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. Preparedby:Reviewedby:Approvedby: KimiLu/EngineerBaretWu/DirectorLeviLee/Manager Note:Theresultsshowninthistestreportreferonlytothesample(s)testedunlessotherwisestated.Thistest reportshallnotbereproducedexceptinfull,withoutpriorwrittenapprovalofZHT.Thisdocumentmaybe alteredorrevisedbyZHT,personnelonly,andshallbenotedintherevisionofthedocument. ProjectNo.:ZHT-260126107W02-2 Page 2 of 11 TableofContentsPage 1.GENERALINFORMATION................................................................................................................................3 1.1.GENERALDESCRIPTIONOFEUT.......................................................................................................3 1.2.TESTMODES.........................................................................................................................................4 1.3.AUXILIARYEQUIPMENT.......................................................................................................................5 2.RFEXPOSURETEST........................................................................................................................................6 2.1.MEASURINGSTANDARD.....................................................................................................................6 2.2.REQUIREMENTS...................................................................................................................................6 2.3.LIMITS....................................................................................................................................................6 2.4.TESTSETUP..........................................................................................................................................7 2.5.TESTPROCEDURE...............................................................................................................................7 2.6.MEASUREMENTUNCERTAINTY.........................................................................................................7 2.7.TESTINSTRUMENTSLIST...................................................................................................................8 2.8.TESTRESULT........................................................................................................................................8 2.9.TESTPHOTOS.......................................................................................................................................9 ProjectNo.:ZHT-260126107W02-2 Page 3 of 11 1.GENERALINFORMATION 1.1.GENERALDESCRIPTIONOFEUT ProductName:QI2.225WMagneticWirelessCharger TestModelNo.: JH25 Hardwareversion:V1.0 Softwareversion:V1.0 OperationFrequency: 110.1-140kHz,360kHz Modulationtype:ASK AntennaType:InductiveloopcoilAntenna Antennagain:0dBi Ratings:Input:PD/QC:9V,Output:7.5W(MAX) Input:PD/QC:12V,Output:15W(MAX) Input:PPS:3.3-16V,Output:25W(MAX) Input:PPS:3.3-21V,Output:25W(MAX) Input:AVS:5-20V,Output:25W(MAX) SampleNumber:260126107YP001 Remark:Theantennagainisprovidedbythecustomer,ifthedataprovidedbythecustomerisnotaccurate, GuangdongZhonghanTestingTechnologyCo.,Ltd.doesnotassumeanyresponsibility. ProjectNo.:ZHT-260126107W02-2 Page 4 of 11 1.2.TESTMODES TestModes: Mode1ACAdapter+Wirelesschargingmode(25W) Mode2ACAdapter+Wirelesschargingmode(15W) Mode3ACAdapter+Wirelesschargingmode(10W) Mode4ACAdapter+Wirelesschargingmode(7.5W) Mode5ACAdapter+Wirelesschargingmode(5W) Mode6Standby Note:Allmodesweretested,onlytheworst-casewasrecordedinthereport.Mode1istheworstmode. ProjectNo.:ZHT-260126107W02-2 Page 5 of 11 1.3.AUXILIARYEQUIPMENT Item EquipmentMfr/BrandModel/TypeNo.SeriesNo.Note E-1 ACAdapter VivoMobileCommunication Co.,Ltd V12060L1H0-CN /AE E-2 Mobilephone XiaomiCommunicationsCo., Ltd. Xiaomi13 /AE ProjectNo.:ZHT-260126107W02-2 Page 6 of 11 2.RFEXPOSURETEST 2.1.MEASURINGSTANDARD KDB680106D01WirelessPowerTransferv04 2.2.REQUIREMENTS Accordingtotheitem5ofKDB680106D01v04: Inductivewirelesspowertransferapplicationsthatmeetallofthefollowingrequirementsareexcludedfrom submittinganRFexposureevaluation. Requirementsofsection3ofKDB680106D01Yes/NoDescription MobileDeviceandPortableDeviceConfigurationsYesMobileDevice EquipmentAuthorizationProceduresforDevicesOperatingat FrequenciesBelow4MHz Yes Thedeviceoperateinthe frequencyrangeCellphone: 110.1-140kHz,360kHz RFExposurecompliancemaybeensuredonlyforaminimum conditionsatsmallerdistancescanstillbeconsidered unlikely.separationdistancethatisgreaterthan20cm,whileuse Yes TheEUTH-fieldandE-field strengthsat20cmsurrounding the…

Text truncated - open the document above for the full version.

ProjectNo.:ZHT-260126107W02-1 Page 1 of22 FCCTESTREPORT FCCID:2BQO7-JH25 ApplicantName...............: ShenzhenJinghuaChuangxingTechnologyCo.,Ltd. Address............................: 5thFloor,BuildingA,JinhongIndustrialZone,ShiyanStreet,Bao'anDistrict, ShenzhenChina ManufacturerName.........: ShenzhenJinghuaChuangxingTechnologyCo.,Ltd. Address............................: 5thFloor,BuildingA,JinhongIndustrialZone,ShiyanStreet,Bao'anDistrict, ShenzhenChina Product............................: QI2.225WMagneticWirelessCharger Model(s)...........................: JH25 AdditionalModel(s)..........: SH-5005,GW-0589,MG-9073 Trademark........................: JH ModelDifference..............: JH25isthetestmodel,whileothermodelsarederivativemodels.These modelsarethesameonthecircuit,onlywithdifferentmodelnamesand Lengthofchargingcable.Therefore,thetestdataofJH25canrepresentthe remainingmodels. Preparedby......................:GuangdongZhonghanTestingTechnologyCo.,Ltd. Address............................:Room104/201,Building1,YibaolaiIndustrialPark,Qiaotou,Fuhai Subdistrict,Bao'anDistrict,Shenzhen,Guangdong,China DateofReceipt................:Jan.26,2026 DateofTest(s)..................:Jan.26,2026toFeb.25,2026 DateofIssue....................:Feb.25,2026 TestRequested................:Selecttest(s)asrequestedbytheclient. TestStandard(s)................:FCCCFRTitle47Part15SubpartC Testprocedure..................:ANSIC63.10-2020 Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. Preparedby:Reviewedby:Approvedby: KimiLu/EngineerBaretWu/DirectorLeviLee/Manager Note:Theresultsshowninthistestreportreferonlytothesample(s)testedunlessotherwisestated.Thistest reportshallnotbereproducedexceptinfull,withoutpriorwrittenapprovalofZHT.Thisdocumentmaybe alteredorrevisedbyZHT,personnelonly,andshallbenotedintherevisionofthedocument. ProjectNo.:ZHT-260126107W02-1 Page 2 of 22 TABLEOFCONTENTS 1.TESTSUMMARY......................................................................................................................................3 2.GENERALINFORMATION......................................................................................................................4 3.1GENERALDESCRIPTIONOFEUT...................................................................................................4 3.2Testmode...........................................................................................................................................5 3.3BlockDiagramofEUTConfiguration..................................................................................................6 3.4TestConditions...................................................................................................................................6 3.TESTFACILITYANDTESTINSTRUMENTUSED.................................................................................7 4.1TestFacility.........................................................................................................................................7 4.2InstrumentListForAllTestItems.......................................................................................................7 4.3Testingsoftware..................................................................................................................................8 4.4MeasurementUncertainty...................................................................................................................8 4.CONDUCTEDEMISSIONTEST..............................................................................................................9 5.1CONDUCTEDEMISSIONMEASUREMENT.....................................................................................9 5.1.1POWERLINECONDUCTEDEMISSIONLimits.............................................................................9 5.1.2TESTPROCEDURE........................................................................................................................9 5.1.3DEVIATIONFROMTESTSTANDARD...........................................................................................9 5.1.4TESTSETUP.................................................................................................................................10 5.1.5EUTOPERATINGCONDITIONS..................................................................................................10 5.1.6TestResult.....................................................................................................................................11 5.RADIATEDEMISSIONMEASUREMENT..............................................................................................13 6.1RadiatedEmissionLimits..................................................................................................................13 6.2AnechoicChamberTestSetupDiagram..........................................................................................14 6.3TestProcedure.................................................................................................................................14 6.4DEVIATIONFROMTESTSTANDARD............................................................................................14 6.5TestResult........................................................................................................................................15 6.BANDWIDTHTEST................................................................................................................................18 7.ANTENNAREQUIREMENT...................................................................................................................21 8.TESTSETUPPHOTO............................................................................................................................22 9.EUTCONSTRUCTIONALDETAILS......................................................................................................22 ProjectNo.:ZHT-260126107W02-1 Page 3 of 22 1.TESTSUMMARY TestItemSectioninCFR47Result Antennarequirem…

Text truncated - open the document above for the full version.

承 认 书 SPECIFICATION FOR APPROVAL 客 户 名 称 深圳市景华创兴科技有限公司 Shenzhen Jinghua Chuangxing Technology Co., Ltd. ： CUSTOMER`S NAME 客 户 料 号 ： CUSTOMER`S P/N 产 品 规 格 Y.A11.506 ： PRODUCT SPEC 制 作 日 期 2026年1月17日 ： ISSUE DATE 拟制 PREPARED BY 审核 CHECKED BY 批准 APPROVED BY 客户承认 CUSTOMER APPROVE 程杰 Cheng J 李蓓 Li Bei ie 李 ADD 博文 东莞市科技有限公司 DONGGUANBOHONG TECHNOLOGY CO., LTD ：东莞市大朗镇富民中路533号 ADD：No. 533, Fumin Middle Road, Dalang Town, Dongguan City *本承认书请在首批下单生产此机种前回签，否则视为贵方默认此承认书内所有内容* *This Acknowledgement Letter should be returned before the first batch of orders for the production of this model is placed. Otherwise, it will be regarded as your default acceptance of all the contents within this Acknowledg TEL：0769-82866410 FAX：0769-82866409 ement Letter.* 工 博 程部 红 专用章 科 红 博 市 莞 东 技 有 限 公 司 Li Bowen 东莞市博红科技有限公司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUST 景华创兴 Jinghua Chuangxing OMER`S P/N 0 ISSUE DATEPRODU 2026.1.17 CT SPEC Y.A11.506 SPECIFICATION CONTROL DRAWING REVISIONS REV DESCRIPTIONDATEISSUE BY A INITIAL2026年1月17日 APPROVAL BY 李博文Li 李蓓Li Bei Bowen 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 东莞市博红科技有限公司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUSTOMER`S P/N 0 ISSUE DATEPROD 2026.1.17 UCT SPEC Y.A11.506 1.MATERIAL: NOITEMTYPESUPPLIERSUL FILE NO 1 MnZn-Ferrite G43.5*5.2*T0.8 LX/ 2 [email protected]*80线材 Wire P RH/ 3 Sn99.3:Cu0.锡 Tin 7 BTL/ 4 BE885-900 Electronic yellow glue 7 BR/ 5 42*0. double faced adhesive tape 1 HWD/ 6 6*0.02 high- temperat ure tape 5 ZR/ 7 MnZn-Ferrite 15*0.6 magneti c sheet 5 LX/ 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 景华创兴 Jinghua Chuangxing 东莞市博红科技有限公司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUSTOMER`S P/N 0 ISSUE DATEPROD 2026.1.17 UCT SPEC Y.A11.506 ISSU 2.DIMENSION：unit:mm E 注： 1.线圈贴紧磁片，不可翘起； 1.The coil should be tightly attached to the magnetic sheet and must not be lifted up. 2.线圈表面整洁，无脏污； 2.The surface of the coil is clean and free of dirt. 3.背贴白色双面胶，带拉手； 3.Back attached with white double-sided adhesive tape, with a handle. 4.单线圈额定电流2.4A，线圈温度155°C；5.线圈中间贴15圆磁片； 4.Single coil rated current is 2.4A, and the coil temperature is 155°C; 5 . A 15-round magnetic sheet is placed in the middle of the coil. CHEC 李蓓Li Bei KAPPROVA 程杰Cheng Jie L B 李博文Li Bowen YBYBY 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 景华创兴 Jinghua Chuangxing 东莞市博红科技有限公司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUSTOMER`S P/N 0 ISSUE DATEPRODU 2026.1.17 CT SPEC Y.A11.506 4.CIRCUIT DIAGRAM 5.WINDING NOWINDINGWIRETURNSTAPEWINDING CONDITION N1S-FØ0.08*80C 11 / CCW 6.CHARACTERISTIC ITEMMEASURED POINTTECHNICAL DATATESTING CONDITION & INSTRUMENT LSS-F7uH±5% LCR1062 100KHz/1V AT 25°C±2°C QS-F60 Min LCR1062 100KHz/1V AT 25°C±2°C DCRS-F 58mΩ Max LCR1062 1KHz/0.3V AT 25°C±2°C 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 工程部专用章 司 公 限 有 技 科 红 博 市 莞 东 景华创兴 Jinghua Chuangxing 东莞市博红科技有限公司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUSTOMER`S P/N 0 ISSUE DATEPRODU 2026.1.17 CT SPEC Y.A11.506 7.THE PACKING WAY 1.珍珠棉规格：355*235*65mm*20格； Pearl foam specification: 355*235*65mm, 20 layers. 2.每格装16pcs，每盘320pcs； Each box contains 16 pieces, and each tray contains 320 pieces. 3.每箱装5盘； Each box contains 5 plates. 4.每箱合计：1600pcs； Total for each box: 1600 pieces; 工程部专用章 司 公 限 有 技 科 红 博 市 莞 东 景华创兴 Jinghua Chuangxing 东莞市博红科技有限公司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL CUSTOMERCUST 景华创兴Jinghua Chuangxing OMER`S P/N 0 ISSUE DATEPRODU 2026.1.17 CT SPEC Y.A11.506 序 m e mo 号 handling metCONTENThod signature date 1 2 3 4 5 6 7 8 9 10 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司

FCCID:2BQO7-JH25 EUTTESTPHOTOS FCCID:2BQO7-JH25 ※※※※※ENDOFREPORT※※※※※