2BQTM-DPS2400LPortable Power Pack

Caution Before using our power station, please read this manual carefully to understand the proper use of your unit. Keep this manual handy. POWER STATION Model:DPS2400L-C TABLEOFCONTENTS 2 Explanation of the symbols on the product ............................................................................ 03 Introduction ............................................................................................................................. 04 Product description ................................................................................................................. 06 Proper use .............................................................................................................................. 08 Safety instructions .................................................................................................................. 08 Technical data ......................................................................................................................... 11 Unpacking ............................................................................................................................... 12 Charging ................................................................................................................................. 12 Description of the various connections and the display......................................................... 14 Start up ................................................................................................................................... 19 Electrical connection .............................................................................................................. 20 Cleaning .................................................................................................................................. 21 Transport ................................................................................................................................. 21 Storage ................................................................................................................................... 21 Maintenance ........................................................................................................................... 21 Disposal and recycling ............................................................................................................ 21 Troubleshooting ...................................................................................................................... 24 3 Explanation of the symbols on the product Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompanying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace proper accident prevention measures. m Befo re co mmissioning, read and observe the operating manual and safety instruc- tions! Do not use the product in wet conditions! Protect from moisture! Observe warnings and safety instructions! The battery charger is only suitable for use indoors. Do not throw old equipment away with household waste Mains power unit corresponds to the RoH guideline. Do not throw Li-ion rechargeable batteries away with household waste Connection identification We have marked points in this operating manual that impact your safety with this symbol Atten tion! SMPS(Switch mode power supply unit) SMPS incorporating a short-cir cuit-proof safety isolating transformer (inherently or non-inherently) 4 Introduction Dear Customer, We hope your new product brings you much enjoyment and succ ess. Note: In accordance with the applicable product liability laws, the manufacturer of this product assumes no liability for damage to the product or caused by the product arising from: • Improper handling • Failure to comply with the operating instructions • Repairs carried out by third parties, unauthorised specialists. • Installing and replacing nonoriginal spare parts • Application other than specified • Failure of the electrical system in the event of the electrical regulations and VDE provisions 0100, DIN 57113 / VDE0113 not being observed Note: Read through the complete text in the operating manu-al before installing and commissioning the device. This operating manual should help you to familiarise yourself with your product and to use it for its intended purpose. The operating manual includes important instructions for the safe, proper and economic operation of the product, for avoiding danger, for minimising repair costs and downtimes and for increasing the reliability and extending the s ervice life of the product. In addition to the safety instructions in this operating manual, you must also observe the regulations appli-cable to the operation of the product in your country. Keep the operating manual package with the power tool at all times and store it in a plastic cover to protect it from dirt and moisture. They must be read and carefully observed by all operating personnel before starting the work. The product may only be used by personnel who have been trained to use it and who have been instructed with respect to the associated hazards. The required minimum age must be observed. In addition to the safety instructions in this operating manual and the separate regulations of your country, the generally recognised technical rules relating to the operation of such machines must also be observed. We accept no liability for accidents or damage that occur due to a failure to observe this manual and the safety instructions. 5 Introduction FCC his device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s ). Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference. (2) this device must accept any interference received, including interference thatmay cause undesired operation. Changes or modifications not expressly approved by the party responsible for com…

Text truncated - open the document above for the full version.

Chongqing Dajiang Power Equipment Co., Ltd 071426-19 Certification Application Attestation Statements Date: August 13, 2026 American Certification Body, Inc. 3060 Williams Drive, Suite 300 #104 Fairfax, VA 22031 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) ______( Chongqing Dajiang Power Equipment Co., Ltd)______ certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) ______( Chongqing Dajiang Power Equipment Co., Ltd)______ (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / √ - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. The applicant also certifies that the device does not have cybersecurity and/or anti-virus software produced by Kaspersky Lab, Inc or any of its successors and assignees identified on the covered list installed on the device, nor will it be installed by the applicant at any time after certification. Thank you, By: __________________________ _______ Jenny Cheng ____ (Signature 2 ) (Print name) Title: _ Product Regulatory Manager Company: Chongqing Dajiang Power Equipment Co., Ltd Telephone: +86-23-15902337522 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters must be placed on appropriate letterhead.

U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): Tim Payne/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Chongqing Dajiang Power Equipment Co., Ltd Grantee Code: 2BQTM-DPS2400L Contact Name: Jenny Cheng Street Address: Group 2nd, Shihe Village, Qinggang Town, Bishan District City/Province/Zip: Chongqing, 402761 Telephone No:15902337522 Email: [email protected] Applicant Signature 1 : Date: 2026.7.15 Signed by (Printed Name/Title): Jenny Cheng Senior Regulatory Supervisor Engineer 1 - Letters should be placed on appropriate letterhead.

Chongqing Dajiang Power Equipment Co., Ltd 041521-14 Authority to Act as Agent Date: August 10, 2026 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Intertek Testing Services Zhejiang Ltd is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: December 30, 2026 By: _________________________ Jenny Cheng 1 (Signature 1 ) (Print name) Title: Product Regulatory Manager On behalf of: Chongqing Dajiang Power Equipment Co., Ltd_ (Company Name) Telephone: +86-23-15902337522 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Chongqing Dajiang Power Equipment Co., Ltd 041521-14 Request for Confidentiality Date: August 10, 2026 Subject: Confidentiality Request for: ______(2BQTM-DPS2400L)______ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐Short Term☒Permanent Block Diagrams ☐Short Term External Photos ☐Short Term☐Permanent * 1 Internal Photos ☐Short Term☒Permanent Operation Description/Theory of Operation ☐Short Term☒Permanent Schematics ☐Short Term Test Setup Photos ☐Short Term☐Permanent * 3 User’s Manual ______ Chongqing Dajiang Power Equipment Co., Ltd_____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: / Product Regulatory Manager Jenny Cheng (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Cover Letter for Wireless Charger Data:2026-08-10 Dear Sir/Madam, There’s a Portable Power Pack that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below Wireless Charger with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Applicant: Chongqing Dajiang Power Equipment Co., Ltd Product Description: Portable Power Pack Model No: DPS2400L-C FCC ID: 2BQTM-DPS2400L Requirement Technical Result 1) Power transfer frequency is less than 1 MHz115-205kHzComplied 2) The output power from each transmitting element coil is less than or equal to 15 watts 15W Complied 3) A client device providing the maximum permitted load is placed in physical contact with the transmitter Please refer to test report and RF exposure report. Complied 4) Mobile exposure conditions onlyMobile Complied 5) The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit. H-field strengths at 15 cm surrounding the device and 20cm above the top surface from all simultaneous transmitting coils is less than 50% of the MPE limit. Complied 6) For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded, and with all the radiating structures operating at maximum power at the same time. Please refer to RF exposure report. Complied Sincerely, By: ___ ___ ________ Jenny Cheng (Signature) (Print name)

FCC ID: 2BQTM-DPS2400L External Photos Overview of DPS2400L-C and Arc 2400 Pro FCC ID: 2BQTM-DPS2400L FCC ID: 2BQTM-DPS2400L Overview (input panel side) of Arc 2400 Pro (other part is same as DPS2400L-C) Overview of DPS2400L-D and RPS2024AA-PCS FCC ID: 2BQTM-DPS2400L FCC ID: 2BQTM-DPS2400L ***END of the report***

2026-01 2400W total total 36W total 200W 120V,60Hz 120V,60Hz 4800W Wireless charging:15W Contain FCC ID:2ANDL-CBUFCC ID: 2BQTM-DPS2400L 6612-02-001068 141*141mm 197*161mm 参数贴花 6612-02-00111 9 20mm The top of the machine The bottom of the machine 6612-02-001126 90*24mm

FCC ID: FCC ID: 2BQTM-DPS2400L Internal Photos FCC ID: FCC ID: 2BQTM-DPS2400L FCC ID: FCC ID: 2BQTM-DPS2400L Top view of Inverter board Bottom view of Inverter board FCC ID: FCC ID: 2BQTM-DPS2400L Top view of MCU board on inverter board Bottom view of MCU board on inverter board FCC ID: FCC ID: 2BQTM-DPS2400L Wireless charging module Antenna FCC ID: FCC ID: 2BQTM-DPS2400L Overview of Battery pack Cell ***END of the report***

Chongqing Dajiang Power Equipment Co., Ltd MPE ASSESSMENT REPORT Report Type: FCC MPE assessment report Model: DPS2400L-C, DPS2400L-D, Arc 2400 Pro, RPS2024AA-PCS REPORT NUMBER: 260200257HAN-002 ISSUE DATE: July 28, 2026 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-02_V1 © 2018 Intertek Intertek Testing Services (Shanghai FTZ) Co., Ltd Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-02_V1© 2018 Intertek Page 2 of 11 Report no.: 260200257HAN-002 Applicant: Chongqing Dajiang Power Equipment Co., Ltd. Group 2nd, Shihe Village, Qinggang Town, Bishan District, Chongqing, 402761, China Manufacturer: Chongqing Dajiang Power Equipment Co., Ltd. Group 2nd, Shihe Village, Qinggang Town, Bishan District, Chongqing, 402761, China FCC ID: 2BQTM-DPS2400L SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: FCC PART 1 SECTION 1.1310 KDB447498 D01 General RF Exposure Guidance v06 KDB 680106 D01 RF Exposure Wireless Charging Apps v04 PREPARED BY: REVIEWED BY: Alex Wu Wakeyou Wang Project Engineer Reviewer Report No.: 260200257HAN-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 11 Revision History Report No. Version Description Issued Date 260200257HAN-002 Rev. 01 Initial issue of report July 28, 2026 Report No.: 260200257HAN-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 11 Measurement result summary TEST ITEM FCC REFERENCE TEST RESULT NOTE RF Exposure 1.1310 Pass - Notes: 1: NA =Not Applicable 2: Determination of the test conclusion is based on IEC Guide 115 in consideration of measurement uncertainty. 3: Additions, Deviations and Exclusions from Standards: None. Report No.: 260200257HAN-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 11 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: Portable Power Pack Type/Model: DPS2400L-C, DPS2400L-D, Arc 2400 Pro, RPS2024AA-PCS Description of EUT: The product covered by this report is a portable power pack with 120VAC/60Hz input and 12-60VDC input, and with 120VAC/60Hz output, 12VDC output, USB output and Wireless charging. The product can be charged and supply the power to AC/DC output port at the same time. AC input and DC input can operate at the same time. AC output and DC output can operate at the same time. This device is intended to be used indoors only. This device is intended to be stored in a vehicle. This device is not intended for use in a commercial repair facility. 1.DPS2400L-C and DPS2400L-D are identical with each other except the shape of handles and ventilation openings. 2.DPS2400L-C and Arc 2400 Pro are identical with each other except the input panel appearances. 3 the Arc 2400 Pro, RPS2024AA-PCS are identical with each other except the model’s name. We test the DPS2400L-C under different working modes as below: 1: standby mode. 2: wireless charging mode with 100% load. The worst testing data under mode 2 is listed in the report as representative. Rating: AC input: 120V, 60HZ, 1750W, Max.15A DC input: 12-60VDC, Max.1200W, 25A Total output power: AC 2400W+DC 410W AC output(*5): 120V, 60HZ, total: 2400W USB-A output(*2): 5V, 2.4A, total: 24W USB-A Quick Charge (*2): 5V, 3A; 9V, 2A; 12V, 1.5A; total: 36W Type-C output(*2): 5V/9V/12V/15V, 3A; 20V, 5A; total: 200W Cigarette lighter output: 12V, 10A DC output(*2):12V, 5A, total:120W Wireless charging(*2): Max.15W, total: 30W Charging Ambient temperature: 0°C~40°C Discharging Ambient temperature: -10°C ~40°C Category of EUT: Class B EUT type: Tabletop Floor standing Software Version: / Report No.: 260200257HAN-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 11 Hardware Version: / Sample number: 1260205-02-007 Sample received date: March 20, 2026 Date of test: May 24- 25, 2026 1.2 Technical Specification Frequency Range: 115kHz – 205kHz Modulation: FSK Antenna: Coil antenna Report No.: 260200257HAN-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 11 1.3 Description of Test Facility Name: Intertek Testing Services Zhejiang Ltd Address: Building No. 2, Juanhu Science and Technology Innovation Park, No. 500 Shuiyueting East Road, Haining City, Zhejiang Province, China Telephone: +86 573 8713 7201 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L13980 A2LA Accreditation Lab Certificate Number: 7662.01 FCC Accredited Lab Designation Number: CN1452 IC Registration Lab CAB identifier.: CN0197 VCCI Registration Lab Member No: 4464 (Registration No.: C-20226, T-20227, R-20273, G-20261) Report No.: 260200257HAN-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 8 of 11 2 TEST SPECIFICATIONS 2.1 Standards or specification FCC PART 1 SECTION 1.1310 KDB 680106 D01 RF Exposure Wireless Charging Apps v04 KDB447498 D01 General RF Exposure Guidance v06 2.2 Mode of operation during the test Within this test report, EUT was tested under all modes and tested under its rating voltage and frequency. Other voltage …

Text truncated - open the document above for the full version.

Chongqing Dajiang Power Equipment Co., Ltd RF TEST REPORT Report Type: FCC Part 15C RF report Model: DPS2400L-C, DPS2400L-D, Arc 2400 Pro, RPS2024AA-PCS REPORT NUMBER: 260200257HAN-001 ISSUE DATE: July 28, 2026 DOCUMENT CONTROL NUMBER: TTRFFCCPART15C_V1 © 2018 Intertek Intertek Testing Services Zhejiang Ltd., Building No. 2, Juanhu Science and Technology Innovation Park, No. 500 Shuiyueting East Road, Haining City, Zhejiang Province, China Telephone: +86 573 8713 7201 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCPART15C_V1 © 2018 Intertek Page 2 of 25 Report no.: 260200257HAN-001 Applicant: Chongqing Dajiang Power Equipment Co., Ltd. Group 2nd, Shihe Village, Qinggang Town, Bishan District, Chongqing, 402761, China Manufacturer: Chongqing Dajiang Power Equipment Co., Ltd. Group 2nd, Shihe Village, Qinggang Town, Bishan District, Chongqing, 402761, China FCC ID: 2BQTM-DPS2400L SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2024): Radio Frequency Devices (Subpart C) ANSI C63.10 (2020) +Cor.1(2023) +C63.10a (2024) +Errata to C63.10a(2024): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices PREPARED BY: REVIEWED BY: Alex Wu Wakeyou Wang Project Engineer Reviewer Report No.: 260200257HAN-001 TEST REPORT TTRFFCCPART15C_V1 © 2018 Intertek Page 3 of 25 Content REVISION HISTORY................................................................................................................................................ 4 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 5 1 GENERAL INFORMATION ............................................................................................................................. 6 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ........................................................................................... 6 1.2 TECHNICAL SPECIFICATION ......................................................................................................................... 7 1.3 DESCRIPTION OF TEST FACILITY ................................................................................................................... 7 2 TEST SPECIFICATIONS ................................................................................................................................... 8 2.1 STANDARDS OR SPECIFICATION .................................................................................................................... 8 2.2 MODE OF OPERATION DURING THE TEST ........................................................................................................ 8 2.3 TEST SOFTWARE LIST ................................................................................................................................. 8 2.4 TEST PERIPHERALS LIST .............................................................................................................................. 8 2.5 TEST ENVIRONMENT CONDITION: ................................................................................................................. 8 2.6 INSTRUMENT LIST .................................................................................................................................... 9 2.7 MEASUREMENT UNCERTAINTY .................................................................................................................. 10 3 RADIATED EMISSIONS................................................................................................................................ 11 3.1 LIMIT .................................................................................................................................................. 11 3.2 MEASUREMENT PROCEDURE .................................................................................................................... 12 3.3 TEST CONFIGURATION ............................................................................................................................. 13 3.4 TEST RESULTS OF RADIATED EMISSIONS ....................................................................................................... 15 4 CONDUCTED EMISSIONS. .......................................................................................................................... 19 4.1 LIMIT .................................................................................................................................................. 19 4.2 TEST CONFIGURATION ............................................................................................................................. 19 4.3 MEASUREMENT PROCEDURE .................................................................................................................... 20 4.4 TEST RESULTS OF CONDUCTED EMISSIONS ................................................................................................... 21 5 EMISSION BANDWIDTH ................................................................…

Text truncated - open the document above for the full version.

Declaration Letter Related FCC ID: 2BQTM-DPS2400L All measurements for DPS2400L-C were performed radiated and therefore additional antenna gain documentation is not required for DPS2400L-C. See internal photo for details of the antenna for DPS2400L-C. By: ____ _____ _____ _______Alex Wu______ (Signature) (Print name) Title: ____Certification Engineer____ Company: ____Intertek Testing Services Zhejiang_______

FCC ID: 2BQTM-DPS2400L Test Setup Radiated emission 30MHz to 1GHz Radiated emission below 30MHz FCC ID: 2BQTM-DPS2400L Conducted emission