2BQXTKT200Two Way Radio

FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Compliance with RF Exposure Standards The radio complies with the following RF energy exposure standards and guidelines: United States Federal Communications Commissin, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310 and 2.1093. American National Standards Institute (ANSI)/ Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005;Canada RSS102 Issue 5 March 2015. Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. FCC Regulatory Conformance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference including received interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. Replacement of any transmitter component (crystal, semiconductor, etc) not authorized by the FCC equipment authorization for this radio could violate FCC rules. SAFETY STATEMENT INFORMATION We declare that the radio is compliance with Radio equipment Directive (RED) 2014/53/EU. The device in the environment with the temperature between 0-40°C and operating under 2000m, otherwise, it may damage your radio. For this device, Head SAR and Body SAR was performed with the device configured in the positions according to EN 50566:2017 & EN IEC/IEEE 62209-1528:2021, and face-up SAR was performed with the device 25mm from the phantom, and Body SAR was performed with the device 0mm from the phantom. Body SAR was also performed with the headset and belt clip attached and without. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. EU 400-480Mhz /US FRSEU 400-480Mhz /US FRSEU 400-480Mhz /US FRSEU 400-480Mhz /US FRS

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025-11-04 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BQXTKT200 Quanzhou UNIKOO Electronic Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, _______________________ WANG JINXING,CEO

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025-11-04 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BQXTKT200 Quanzhou UNIKOO Electronic Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, _______________________ WANG JINXING,CEO

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Date: 2025-11-04 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BQXTKT200 US Agent – Attestation Statement / Part 2.911(d)(7) Quanzhou UNIKOO Electronic Technology Co., Ltd. certifies, that as of November 4, 2025, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BQXTKT200. Quanzhou UNIKOO Electronic Technology Co., Ltd., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Quanzhou UNIKOO Electronic Technology Co., Ltd. for FCC ID: 2BQXTKT200. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Quanzhou UNIKOO Electronic Technology Co., Ltd. FRN: 0037297124 Designated Agent: FCC US Agent, LLC Company Representative: WANG JINXING Tel: +8615905012190 Email: [email protected] Designated Agent Representative: Tim Payne Signature: Signature:

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Nov. 04, 2025 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2BQXTKT200 Model Number: TK200, TK165, TK155, TK145, TK125, UK260, UK216, UK215, UK206, UK205, SK300, SK256, SK236, SK226, SK216, FT40, FT34, FT33, FT32, FT31, MX190, MX180, MX170, MX160, MX150, BC100, BC146, BC136, BC126, BC116, S300, S235, S225, S215, S205, RC3000, RC2880, RC2860, RC2850, RC2830, C2000, C1980, C1960, C1950, C1930, VC320, VC315, VC316, VC305, VC306 To Whom It May Concern: We, The Quanzhou UNIKOO Electronic Technology Co., Ltd. hereby declare that the models are identical except the case design and model name. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: WANG JINXING

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date:2025-11-04 Subject; Request for Confidentiality FCC ID: 2BQXTKT200 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: WANG JINXING Title: CEO

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Agent Authorization Company: Quanzhou UNIKOO Electronic Technology Co., Ltd. Address: B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Product Name: Two Way Radio Model Number(s): TK200, TK165, TK155, TK145, TK125, UK260, UK216, UK215, UK206, UK205, SK300, SK256, SK236, SK226, SK216, FT40, FT34, FT33, FT32, FT31, MX190, MX180, MX170, MX160, MX150, BC100, BC146, BC136, BC126, BC116, S300, S235, S225, S215, S205, RC3000, RC2880, RC2860, RC2850, RC2830, C2000, C1980, C1960, C1950, C1930, VC320, VC315, VC316, VC305, VC306 Product Description: Two Way Radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Nov.04,2025 Name: WANG JINXING Company: Quanzhou UNIKOO Electronic Technology Co., Ltd.

Report No.: AGC17061250803AP02 Page 1 of 13 EXTERNAL PHOTOS All View of EUT The model name of TK200 Top View of EUT The model name of TK165 The model name of TK155 The model name of TK145 The model name of TK125 The model name of TK200 Report No.: AGC17061250803AP02 Page 2 of 13 Bottom View of EUT Front View of EUT Report No.: AGC17061250803AP02 Page 3 of 13 Back View of EUT Left View of EUT Report No.: AGC17061250803AP02 Page 4 of 13 Right View of EUT Port-1 View of EUT Report No.: AGC17061250803AP02 Page 5 of 13 Port-2 View of EUT The model name of TK165 Top View of EUT Report No.: AGC17061250803AP02 Page 6 of 13 Bottom View of EUT Front View of EUT Report No.: AGC17061250803AP02 Page 7 of 13 Back View of EUT Left View of EUT Report No.: AGC17061250803AP02 Page 8 of 13 Right View of EUT Port-1 View of EUT Report No.: AGC17061250803AP02 Page 9 of 13 Port-2 View of EUT The model name of TK125 Top View of EUT Report No.: AGC17061250803AP02 Page 10 of 13 Bottom View of EUT Front View of EUT Report No.: AGC17061250803AP02 Page 11 of 13 Back View of EUT Left View of EUT Report No.: AGC17061250803AP02 Page 12 of 13 Right View of EUT Port-1 View of EUT Report No.: AGC17061250803AP02 Page 13 of 13 Port-2 View of EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm&20mm FCC ID: 2BQXTKT200

Report No.: AGC17061250803AP02 Page 1 of 22 INTERNAL PHOTOS The model name of TK200 Open View-1 of EUT Open View-2 of EUT Report No.: AGC17061250803AP02 Page 2 of 22 Internal View-1 of EUT Internal View-2 of EUT UHF Antenna Report No.: AGC17061250803AP02 Page 3 of 22 Internal View-3 of EUT Internal View-4 of EUT Report No.: AGC17061250803AP02 Page 4 of 22 Internal View-5 of EUT Internal View-6 of EUT Report No.: AGC17061250803AP02 Page 5 of 22 Internal View-7 of EUT Internal View-8 of EUT Report No.: AGC17061250803AP02 Page 6 of 22 Internal View-9 of EUT Internal View-10 of EUT Report No.: AGC17061250803AP02 Page 7 of 22 Internal View-11 of EUT Battery of EUT Report No.: AGC17061250803AP02 Page 8 of 22 The model name of TK165 Open View-1 of EUT Open View-2 of EUT Report No.: AGC17061250803AP02 Page 9 of 22 Internal View-1 of EUT Internal View-2 of EUT UHF Antenna Report No.: AGC17061250803AP02 Page 10 of 22 Internal View-3 of EUT Internal View-4 of EUT Report No.: AGC17061250803AP02 Page 11 of 22 Internal View-5 of EUT Internal View-6 of EUT Report No.: AGC17061250803AP02 Page 12 of 22 Internal View-7 of EUT Internal View-8 of EUT Report No.: AGC17061250803AP02 Page 13 of 22 Internal View-9 of EUT Internal View-10 of EUT Report No.: AGC17061250803AP02 Page 14 of 22 Internal View-11 of EUT Internal View-12 of EUT Report No.: AGC17061250803AP02 Page 15 of 22 Battery of EUT The model name of TK125 Open View-1 of EUT Report No.: AGC17061250803AP02 Page 16 of 22 Open View-2 of EUT Internal View-1 of EUT Report No.: AGC17061250803AP02 Page 17 of 22 Internal View-2 of EUT Internal View-3 of EUT UHF Antenna Report No.: AGC17061250803AP02 Page 18 of 22 Internal View-4 of EUT Internal View-5 of EUT Report No.: AGC17061250803AP02 Page 19 of 22 Internal View-6 of EUT Internal View-7 of EUT Report No.: AGC17061250803AP02 Page 20 of 22 Internal View-8 of EUT Internal View-9 of EUT Report No.: AGC17061250803AP02 Page 21 of 22 Internal View-10 of EUT Internal View-11 of EUT Report No.: AGC17061250803AP02 Page 22 of 22 Internal View-12 of EUT Battery of EUT ****************************************End of Report*************************************

Page 1 of 30 FCC Test Report Report No.: AGC17061250803FE01 FCC ID : 2BQXTKT200 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Two Way Radio BRAND NAME : N/A MODEL NAME : TK200, TK165, TK155, TK145, TK125, UK260, UK216, UK215, UK206, UK205, SK300, SK256, SK236, SK226, SK216, FT40, FT34, FT33, FT32, FT31, MX190, MX180, MX170, MX160, MX150, BC100, BC146, BC136, BC126, BC116, S300, S235, S225, S215, S205, RC3000, RC2880, RC2860, RC2850, RC2830, C2000, C1980, C1960, C1950, C1930, VC320, VC315, VC316, VC305, VC306 APPLICANT : Quanzhou UNIKOO Electronic Technology Co., Ltd. DATE OF ISSUE : Oct. 13, 2025 STANDARD(S) : FCC Part 15 Subpart B REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC05559250803FE01 Page 2 of 30 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 13, 2025 Valid Initial Release Report No.: AGC05559250803FE01 Page 3 of 30 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 2.2 Auxiliary Surrounding Description ............................................................................................................. 5 2.2 Test Methodology ...................................................................................................................................... 6 2.3 Description of Test Modes ......................................................................................................................... 6 3. Test Environment ............................................................................................................................................ 7 3.1 Address of The Test Laboratory ................................................................................................................ 7 3.2 Test Facility ................................................................................................................................................ 7 3.3 Environmental Conditions ......................................................................................................................... 8 3.4 Measurement Uncertainty ......................................................................................................................... 8 3.5 List of Equipment Used ............................................................................................................................. 9 4. Summary of Test Results ............................................................................................................................. 10 5. Radiated Emission Measurements .............................................................................................................. 11 5.1 Provisions Applicable .............................................................................................................................. 11 5.2 Measurement Setup ................................................................................................................................ 11 5.3 Measurement Procedure ......................................................................................................................... 12 5.4 Measurement Resul ................................................................................................................................ 13 6. Conducted Emission Measurements .......................................................................................................... 25 6.1 Provisions Applicable .............................................................................................................................. 25 6.2 Measurement Setup ................................................................................................................................ 25 6.3 Measurement Procedure ......................................................................................................................... 26 6.4 Measurement Result ............................................................................................................................... 27 Appendix I: Photographs of Test Setup .......................................................................................................... 29 Appendix II: Photographs of Test EUT ........................................................................................................... 29 Report No.: AGC05559250803FE01 Page 4 of 30 1. General Information Applicant Quanzhou UNIKOO Electronic Technology Co., Ltd. Address B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Manufacturer Quanzhou UNIKOO Electronic Technology Co., Ltd. Address B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Factory Quanzhou UNIKOO Electronic Technology Co., Ltd. Address B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Product Designation Two Way Radio Brand Name N/A Test Model TK200 Series Model(s) TK165, TK155, TK145, TK125, UK260, UK216, UK215, UK206, UK205, SK300, SK256, SK236, SK226, SK216, FT40, FT34, FT33, FT32, FT31, MX190, MX180, MX170, MX160, MX150, BC100, BC146, BC136, BC126, BC116, S300, S235, S225, S215, S205, RC3000, RC2880, RC2860, RC2850, RC2830, C2000, C1980, C1960, C1950, C1930, VC320, VC315, VC316, VC305, VC306 Difference Description All the same except for the case design and model name. Date of receipt of test item Aug. 08, 2025 Date of Test Aug. 08, 2025~Sep. 18, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal …

Text truncated - open the document above for the full version.

Report No.: AGC17061250803AP03 Page 1 of 2 TEST SETUP PHOTOS Radiated Emission Test Setup Below 1GHz Radiated Emission Test Setup Above 1GHz Report No.: AGC17061250803AP03 Page 2 of 2 AC Power Line Conducted Test Setup ****************************************End of Report*************************************