2BQXTP260N4G Poc Radio

4G PoC Radio ŶUS Band 2/4/5/7/12/13/17/ 38/40/41/66 FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference including received interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement: SAR tests are conducted using standard operating positions accepted by FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is an available for sale to the public, it must be tested and certified to the FCC that is does not exceed the exposure limit established by the FCC. Tests for each product are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with and accessory designated for this product or when used with and accessory that contains no metal. To maintain compliance with FCC RF exposure guidelines, hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Quanzhou UNIKOO Electronic Technology Co., Ltd. Address: B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA FCC ID: 2BQXTP260N Date: Mar. 25, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [Quanzhou UNIKOO Electronic Technology Co., Ltd.] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: Quanzhou UNIKOO Electronic Technology Co., Ltd. Address: B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA FRN: 0037297124 Contact Name: WANG JINXING Telephone No: +86-15905012190 Email: [email protected] Signature: Signature:

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Mar. 25, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BQXTP260N Product Name: 4G PoC Radio This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature: Printed Name: WANG JINXING Title: CEO Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 / / / 2 / / / 3 / / /

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Mar. 25, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BQXTP260N FRN: 0037297124 Quanzhou UNIKOO Electronic Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature: Printed Name: WANG JINXING Title: CEO

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA Date: Mar. 25, 2026 Federal Communications Commission Authorization and Evaluation Devision 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Ref: FCC new Grants for FCC ID: 2BQXTP260N Applicant Name: Quanzhou UNIKOO Electronic Technology Co., Ltd. Dear Examiner, The host equipment: N210 (FCC ID: 2BQXTP260N) is a new product with one certified module M12 (Module FCC ID: 2AR45-M12). Grant date: 04/28/2024) integrated. This module is a Single Module, which is integrated into the host without any impact on the RF performance. and can be integrated into the main unit without affecting RF performance. Considering the antenna is designed for the main unit (N210), we retested the power, effective radiated power, equivalent isotropic radiated power, and received signal strength after integrating the module. When the main unit (N210) integrates this module, and the device is less than 20 cm from the human body, it is considered a portable device. SAR testing has been re-evaluated. Test report data clarification: Test Standard Original test reports No.: Testing Data Remark FCC Part 15 Subpart B Reports No. AGC17061260203FE01 N/A Full Test N/A FCC Part 22 Subpart H FCC Part 24 Subpart E FCC Part 27 Subpart D/G/L/M Reports No. AGC17061260203FR01 CTB240415033RFX Add test: ERP/EIRP/Radiated Spurious Emission Based on the module difference description, Frequency Stability, Occupied Bandwidth, Emission Bandwidth, band edge and Conducted Spurious Emission are evaluated refer to original reports IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2019 Reports No.: AGC17061260203FH01 N/A Full Test The host device is portable. CONCLUSION This radio device continues to meet all FCC standard requirements. Please contact me if you have any questions or need further information regarding this application. Sincerely, Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA Signature Date: Feb. 28, 2026 Printed Name of Signee: WANG JINXING Company Name: Quanzhou UNIKOO Electronic Technology Co., Ltd. Company Address: B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA Mar. 25, 2026 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2BQXTP260N Models: N210, N220, N230, N240, N250, PN270, PN280, PN290, PN230, PN240, P25, P26, P27, P28, P29, FP350, FP360, FP370, FP380, FP390, MP328, MP338, MP358, MP368, MP388, DP200, DP210, DP240, DP270, DP290, SK-400P, SK-440P, SK-450P, SK- 460P, SK-480P, RC300, RC320, RC350, RC360, RC380, C20, C21, C22, C23, C24, HK420, HK430, HK450, HK460, HK480 To Whom It May Concern: We, The Quanzhou UNIKOO Electronic Technology Co., Ltd. hereby declare that the model : N210 is identical with the model : N220, N230, N240, N250, PN270, PN280, PN290, PN230, PN240, P25, P26, P27, P28, P29, FP350, FP360, FP370, FP380, FP390, MP328, MP338, MP358, MP368, MP388, DP200, DP210, DP240, DP270, DP290, SK-400P, SK-440P, SK-450P, SK-460P, SK- 480P, RC300, RC320, RC350, RC360, RC380, C20, C21, C22, C23, C24, HK420, HK430, HK450, HK460, HK480, except the model name, outer plastic shell and button placement. Sincerely, Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA Quanzhou UNIKOO Electronic Technology Co., Ltd. Signature: [WANG JINXING, CEO]

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604, Building2, Xiamei Jiayuan Xiamei Town, Nan'an City, Quanzhou, Fujian CHINA Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 25, 2026 Subject; Request for Confidentiality FCC ID: 2BQXTP260N To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: WANG JINXING Title: CEO

Quanzhou UNIKOO Electronic Technology Co., Ltd. B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA Mar. 25, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BQXTP260N I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Quanzhou UNIKOO Electronic Technology Co., Ltd. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Full name of contact person listed on FCC’s website: WANG JINXING Title: CEO Tel: +86-15905012190 Fax: 15905012190 Email: [email protected]

Report No.: AGC17061260203AP02 Page 1 of 4 EXTERNAL PHOTOS All View of EUT Top View of EUT Report No.: AGC17061260203AP02 Page 2 of 4 Bottom View of EUT Front View of EUT Report No.: AGC17061260203AP02 Page 3 of 4 Back View of EUT Left View of EUT Report No.: AGC17061260203AP02 Page 4 of 4 Right View of EUT Port-1 View of EUT ****************************************End of Report*************************************

FCC ID Label Location 40mm*50mm FCC ID: 2BQXTP260N

Report No.: AGC17061260203AP02 Page 1 of 8 INTERNAL PHOTOS Open View-1 of EUT Open View-2 of EUT Report No.: AGC17061260203AP02 Page 2 of 8 Internal View-1 of EUT Internal View-2 of EUT Report No.: AGC17061260203AP02 Page 3 of 8 Internal View-3 of EUT Internal View-4 of EUT LTE Antenna Report No.: AGC17061260203AP02 Page 4 of 8 Internal View-5 of EUT Internal View-6 of EUT Report No.: AGC17061260203AP02 Page 5 of 8 Internal View-7 of EUT Internal View-8 of EUT Report No.: AGC17061260203AP02 Page 6 of 8 Internal View-9 of EUT Internal View-10 of EUT Report No.: AGC17061260203AP02 Page 7 of 8 Internal View-11 of EUT Internal View-12 of EUT Report No.: AGC17061260203AP02 Page 8 of 8 Internal View-13 of EUT Battery View of EUT ****************************************End of Report*************************************

Page 1 of 22 FCC Test Report Report No.: AGC17061260203FE01 FCC ID 2BQXTP260N APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : 4G Poc Radio BRAND NAME : N/A MODEL NAME : N210, N220, N230, N240, N250, PN270, PN280, PN290, PN230, PN240, P25, P26, P27, P28, P29, FP350, FP360, FP370, FP380, FP390, MP328, MP338, MP358, MP368, MP388, DP200, DP210, DP240, DP270, DP290, SK-400P, SK-440P, SK-450P, SK-460P, SK-480P, RC300, RC320, RC350, RC360, RC380, C20, C21, C22, C23, C24, HK420, HK430, HK450, HK460, HK480 APPLICANT : Quanzhou UNIKOO Electronic Technology Co., Ltd. DATE OF ISSUE : Mar. 25, 2026 STANDARD(S) : FCC Part 15 Subpart B REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC17061260203FE01 Page 2 of 22 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 25, 2026 Valid Initial Release Report No.: AGC17061260203FE01 Page 3 of 22 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 2.2 Auxiliary Surrounding Description ............................................................................................................. 5 2.2 Test Methodology ...................................................................................................................................... 6 2.3 Definition of Device Classification ............................................................................................................. 6 2.3 Description of Test Modes ......................................................................................................................... 6 3. Test Environment ............................................................................................................................................ 7 3.1 Address of The Test Laboratory ................................................................................................................ 7 3.2 Test Facility ................................................................................................................................................ 7 3.3 Environmental Conditions ......................................................................................................................... 8 3.4 Measurement Uncertainty ......................................................................................................................... 8 3.5 List of Equipment Used ............................................................................................................................. 9 4. Summary of Test Results ............................................................................................................................. 10 5. Radiated Emission Measurements .............................................................................................................. 11 5.1 Provisions Applicable .............................................................................................................................. 11 5.2 Measurement Setup ................................................................................................................................ 11 5.3 Measurement Procedure ......................................................................................................................... 12 5.4 Measurement Resul ................................................................................................................................ 13 6. Conducted Emission Measurements .......................................................................................................... 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Setup ................................................................................................................................ 17 6.3 Measurement Procedure ......................................................................................................................... 18 6.4 Measurement Result ............................................................................................................................... 19 Appendix I: Photographs of Test Setup .......................................................................................................... 21 Appendix II: Photographs of Test EUT ........................................................................................................... 21 Report No.: AGC17061260203FE01 Page 4 of 22 1. General Information Applicant Quanzhou UNIKOO Electronic Technology Co., Ltd. Address B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA Manufacturer Quanzhou UNIKOO Electronic Technology Co., Ltd. Address B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA Factory Quanzhou UNIKOO Electronic Technology Co., Ltd. Address B1604,Building2, Xiamei Jiayuan Xiamei Town, Nan'an City Quanzhou, Fujian CHINA Product Designation 4G Poc Radio Brand Name N/A Test Model N210 Series Model(s) N220, N230, N240, N250, PN270, PN280, PN290, PN230, PN240, P25, P26, P27, P28, P29, FP350, FP360, FP370, FP380, FP390, MP328, MP338, MP358, MP368, MP388, DP200, DP210, DP240, DP270, DP290, SK-400P, SK-440P, SK-450P, SK-460P, SK-480P, RC300, RC320, RC350, RC360, RC380, C20, C21, C22, C23, C24, HK420, HK430, HK450, HK460, HK480 Difference Description Identical electrical specifications and PCB boards, differing only in model name, outer plastic shell and button…

Text truncated - open the document above for the full version.

Report No.: AGC17061260203AP03 Page 1 of 2 TEST SETUP PHOTOS Radiated Emission Test Setup Below 1GHz Radiated Emission Test Setup Above 1GHz Report No.: AGC17061260203AP03 Page 2 of 2 AC Power Line Conducted Test Setup ****************************************End of Report*************************************