2BR3D-WHD01Wireless HDMI Transmitter And Receiver

FCC ID: 2BR3D-WHD01

FCC ID:2BR3D-WHD01 Test Positions Horizontal-Up (Separation distance of 5mm) Horizontal-Down (Separation distance of 5mm) Vertical-Front (Separation distance of 5mm) Vertical-Back (Separation distance of 5mm)

Shenzhen QC Testing Laboratory Co., Ltd. Page 1 of 2 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Product Name: Wireless HDI Transmitter And Receiver Test Model No.: WHD01 Photograph of Test Setup Conducted Emissions Radiated Emissions (30 MHz - 1 GHz) Shenzhen QC Testing Laboratory Co., Ltd. Page 2 of 2 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Radiated Emissions (Above 1 GHz) ------End------

产品规格书 PRODUCT SPECIFICATION Customer: ShenZhen Actionsmicro Technology Co., Ltd. Customer’s part number: ANT000088 Product description: 5G Frequency Antenna Manufacturer： Shenzhen RedbirdTek Technology Co., Ltd. Address：Room 206, Haibin Technology Building, Bao'an District, Shenzhen City, Guangdong Province, China Tester：Luo wenlai 1、产品技术指标（PRODUCT TECHNICAL SPECIFICATION） 电性能指标Electrical Specifications 频率范围Frequency Range (MHz) 5150-5850 频带宽度Bandwidth (MHz) 5G：700 输入阻抗Input Impendence (Ω) 50 电压驻波比V.S.W.R ≤2.0 增益Gain (dBi) 2.5dBi 极化形式Polarization Type 垂直Vertical 机械指标Mechanical Specifications 天线长度Antenna Length (mm) 6.6*3.9*0.5mm 辐射体Radiator Copper 连接器型号Connect Type NC 外壳颜色Radome Color Silver 重量Weight (g) 0.02 产品简介Product introduction: 该天线是专为无线内置天线设备设计生产的，天线具有外形美观，结 构小巧，一致性高，成本低廉。 The antenna is specially designed and produced for wireless built-in antenna equipment. The antenna has beautiful appearance, small structure, high consistency and low cost. 2、产品图片（PRODUCT PICTURE） 3、产品规格图(PRODUCT SPECIFICATION CHART)单位MM 4、驻波图（STATIONARY WAVE PATTERN） 5.增益效率值Gain and Efficiency： 6.场型图Field Pattern： 5.15G/5.25G 5. 75G/5.85G

Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT25IR-1940E-01 Page 1 of 69 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 www.qctest.com.cn FCC PART 15.407 TEST REPORT On Behalf of Shenzhen Qunyu E-commerce Co., Ltd 403, No. 254, Zone 5, Longsheng New Village, Longsheng Community, Dalang Street, Longhua District, Shenzhen City, China FCC ID: 2BR3D-WHD01 Model: WHD01, WHD02, WHD03, WHD04, WHD05, WHD06, WHD07, WHD08, WHD09, WHD10 September 19, 2025 T hi s Repor t Concer ns: Or iginal Report Equi pm ent T ype: Wireless HDMI Transmitter And Receiver Test Engineer: Fan Yang / Report Number: QCT25IR-1940E-01 Test Date: September 13~17, 2025 Test Result: Pass Reviewed By: Vincent Yang / Approved By: Kendy Wang / Prepared By: Shenzhen QC Testing Laboratory Co., Ltd. East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT25IR-1940E-01 Page 2 of 69 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 www.qctest.com.cn Table of Contents 1. GENERAL INFORMATION ................................................................................................. 5 1.1 Product Description for Equipment under Test (EUT) ............................................................. 5 1.2 System Test Configuration ...................................................................................................... 6 1.3 Test Facility.............................................................................................................................. 8 1.4 Measurement Uncertainty ........................................................................................................ 8 2. SUMMARY OF TEST RESULTS ........................................................................................ 9 3. LIST OF TEST AND MEASUREMENT INSTRUMENTS .................................................. 10 3.1 Conducted Emission Test ...................................................................................................... 10 3.2 Radiated Emission Test ......................................................................................................... 10 3.3 RF Conducted test ................................................................................................................. 11 4. ANTENNA REQUIREMENT .............................................................................................. 12 5. CONDUCTED EMISSIONS ............................................................................................... 13 5.1 Applicable Standard............................................................................................................... 13 5.2 Limit ....................................................................................................................................... 13 5.3 Test setup .............................................................................................................................. 13 5.4 EMI Test Receiver Setup ....................................................................................................... 13 5.5 Test procedure....................................................................................................................... 13 5.6 Test Data ............................................................................................................................... 13 6. EMISSION BANDWIDTH .................................................................................................. 16 6.1. Test Method of -26dB Bandwidth .......................................................................................... 16 6.2. Test Method of -6dB Bandwidth ............................................................................................ 16 6.3. Test Method of 99% Bandwidth ............................................................................................. 16 6.4. Test setup .............................................................................................................................. 17 6.5. Test Data ............................................................................................................................... 17 7. MAXIMUM CONDUCTED OUTPUT POWER ................................................................... 33 7.1. Test Method ........................................................................................................................... 33 7.2. Limit ....................................................................................................................................... 33 7.3. Test setup .............................................................................................................................. 33 7.4. Test Procedure ...................................................................................................................... 33 7.5. Test Data ............................................................................................................................... 33 8. MAXIMUM POWER SPECTRAL DENSITY ...................................................................... 42 8.1. Applicable Standard............................................................................................................... 42 8.2. Limit ....................................................................................................................................... 42 8.3. Test setup .............................................................................................................................. 42 8.4. Test Procedure .…

Text truncated - open the document above for the full version.

Page 46 of 63 Report No.: AiTSZ-251014012FW1 Page 47 of 63 Report No.: AiTSZ-251014012FW1 Page 48 of 63 Report No.: AiTSZ-251014012FW1 Page 49 of 63 Report No.: AiTSZ-251014012FW1 Page 50 of 63 Report No.: AiTSZ-251014012FW1 Page 51 of 63 Report No.: AiTSZ-251014012FW1 Page 52 of 63 Report No.: AiTSZ-251014012FW1 Page 53 of 63 Report No.: AiTSZ-251014012FW1 Page 54 of 63 Report No.: AiTSZ-251014012FW1 Page 55 of 63 Report No.: AiTSZ-251014012FW1 Page 56 of 63 Report No.: AiTSZ-251014012FW1 Page 57 of 63 Report No.: AiTSZ-251014012FW1 Page 58 of 63 Report No.: AiTSZ-251014012FW1 Page 59 of 63 Report No.: AiTSZ-251014012FW1 Page 60 of 63 Report No.: AiTSZ-251014012FW1 Page 61 of 63 Report No.: AiTSZ-251014012FW1 Page 62 of 63 Report No.: AiTSZ-251014012FW1 Page 63 of 63 Report No.: AiTSZ-251014012FW1 Appendix E. Justification of the extended calibration If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 5800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -14.91 - 38.53 - Feb. 21, 2024 -14.349 3.76 38.715 0.185 Feb. 20, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Head 5200MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -9.64 - 25.80 - Feb. 21, 2024 -9.1819 4.75 25.891 0.091 Feb. 20, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. ※※END OF THE REPORT※※

Page 1 of 63 Report No.: AiTSZ-251014012FW1 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093) and IEEE Std 1528-2013 Product Name: Wireless HDMI Transmitter And Receiver Model No.: WHD01 Serial Model: WHD02,WHD03,WHD04,WHD05,WHD06, WHD07,WHD08,WHD09,WHD10 Brand Name: N/A Report No.: AiTSZ-251014012FW1 FCC ID: 2BR3D-WHD01 Prepared for Shenzhen Qunyu E-commerce Co., Ltd 403, No. 254, Zone 5, Longsheng New Village, Longsheng Community, Dalang Street, Longhua District, Shenzhen City Prepared by Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Page 2 of 63 Report No.: AiTSZ-251014012FW1 TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen Qunyu E-commerce Co., Ltd Address ................................. : 403, No. 254, Zone 5, Longsheng New Village, Longsheng Community, Dalang Street, Longhua District, Shenzhen City Manufacturer's Name .......... : Shenzhen GiantPu Technology Co., Ltd. Address ................................. : Room 501,Building C11, Fuyuan Industrial City, No. 598 Zhoushi Road, Jiuwei Community, Hangcheng Street, Baoan District, Shenzhen City Product description Product name ........................ : Wireless HDMI Transmitter And Receiver Trademark ........................... : N/A Model and/or type reference : WHD01 Serial Model........................... : WHD02,WHD03,WHD04,WHD05,WHD06, WHD07,WHD08,WHD09,WHD10 Standards ............................. : FCC 47 CFR Part 2(2.1093) IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Guangdong Asia Hongke Test Technology Limited. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01.Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093). The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited, this document may be altered or revised by Guangdong Asia Hongke Test Technology Limited, personal only, and shall be noted in the revision of the document. Test Sample Number .............................. : AiTSZ-251014012-1 Date of Test Date (s) of performance of tests ............. : Oct. 14, 2025 ~ Oct. 15, 2025 Date of Issue .......................................... : Oct. 18, 2025 Test Result.............................................. : Pass Reviewed by: Approved by: Ken Zou Jack Li Page 3 of 63 Report No.: AiTSZ-251014012FW1 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Oct. 18, 2025 Jack Li Page 4 of 63 Report No.: AiTSZ-251014012FW1 TABLE OF CONTENTS 1. General Information .......................................................................................... 5 1.1. RF exposure limits .................................................................................. 5 1.2. Statement of Compliance ....................................................................... 6 1.3. EUT Description ..................................................................................... 7 1.4. Test specification(s) ................................................................................ 8 1.5. Ambient Condition ................................................................................. 8 1.6. Test Facility ............................................................................................. 8 2. SAR Measurement System ................................................................................. 9 2.1. SATIMO SAR Measurement Set-up Diagram ........................................... 9 2.2. Robot ................................................................................................... 10 2.3. Probe ................................................................................................... 11 2.3.1. E-Field Probe Calibration ................................................................ 11 2.4. Phantoms ............................................................................................. 12 2.5. Technical Data ...................................................................................... 13 2.6. Device Holder ...................................................................................... 14 2.7. Test Equipment List .............................................................................. 15 3. SAR Measurement Procedures ........................................................................ 17 3.1. Power Reference.................................................................................. 17 3.2. Area scan & Zoom scan ........................................................................ 17 3.3. Description of interpolation/extrapolation scheme ............................. 19 3.4. Volumetric Scan ................................................................................... 19 3.5. Power Drift .......................................................................................... 19 4. System Verification Procedure ......................................................................... 20 4.1. Tissue Verification ................................................................................ 20 4.1.1. Tissue Dielectric Parameter Check Results ..................................... 21 4.2. System Verification Procedure ............................................................. 22 4.2.1. System Verification Results ..............................................…

Text truncated - open the document above for the full version.

Shenzhen QC Testing Laboratory Co., Ltd. Page 1 of3 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Product Name: Wireless HDI Transmitter And Receiver Test Model No.: WHD01 EUT Constructional Details： Antenna Shenzhen QC Testing Laboratory Co., Ltd. Page 2 of3 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Shenzhen QC Testing Laboratory Co., Ltd. Page 3 of3 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn -----End------

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: CLF Import and Export Limited Contact Name: David Chen FRN: 0033489683 Address: 1312 17th Street #692,Denver,CO 80202,Unite States Telephone No: (949)254-2565 Email: [email protected] EIN: 98-1720547 Applicant: Company name: Shenzhen Qunyu E-commerce Co., Ltd Product Description: Wireless HDMI Transmitter And Receiver Grantee code: 2BR3D FCC ID: 2BR3D-WHD01 FRN: 0037471232 Contact Name: Kai Zheng Address: 403, No. 254, Zone 5, Longsheng New Village, Longsheng Community, Dalang Street, Longhua District, Shenzhen City, China Telephone No: 17603022172 Fax No: N/A Email: [email protected] [Shenzhen Qunyu E-commerce Co., Ltd] certifies that, as of the date of this filing of the application with the TCB, [CLF Import and Export Limited] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Qunyu E- commerce Co., Ltd] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [CLF Import and Export Limited] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2025/11/5 Applicant’s Name: Kai Zheng US Agent’s Name: David Chen Title: Manager Title: Manager Signature Signature

Shenzhen QC Testing Laboratory Co., Ltd. Page 1 of4 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Product Name: Wireless HDI Transmitter And Receiver Test Model No.: WHD01 EUT Constructional Details Shenzhen QC Testing Laboratory Co., Ltd. Page 2 of4 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Shenzhen QC Testing Laboratory Co., Ltd. Page 3 of4 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Shenzhen QC Testing Laboratory Co., Ltd. Page 4 of4 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn ------End------

C5266091_X13_Ed.1 1/1 < Shenzhen Qunyu E-commerce Co., Ltd> FCC Software Configuration Control Declaration Date: November 5, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: Wireless HDMI Transmitter And Receiver/ WHD01, WHD02, WHD03, WHD04, WHD05, WHD06, WHD07, WHD08, WHD09, WHD10 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature of applicant Name: Kai Zheng Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Shenzhen Qunyu E-commerce Co., Ltd Address: 403, No. 254, Zone 5, Longsheng New Village, Longsheng Community, Dalang Street, Longhua District, Shenzhen City, China Product Name: Wireless HDMI Transmitter And Receiver Model Number: WHD01, WHD02, WHD03, WHD04, WHD05, WHD06, WHD07, WHD08, WHD09, WHD10 FCC Identifier: 2BR3D-WHD01 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Kai Zheng 2025-11-5 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 Shenzhen Qunyu E-commerce Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2025-11-5 Subject: Request for Confidentiality FCC ID: 2BR3D-WHD01 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Kai Zheng Title: Manager ☒

TCB CALL página 1 File FCC ID: 2BR3D-WHD01 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://opencorporates.com/companies/us_co/20231240414 In google: TCB CALL página 2 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "2BR3D-WHD01" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "2BR3D-WHD01" >

Shenzhen Qunyu E-commerce Co., Ltd Product Similarity Declaration Pr oduct nam e: Wireless HDMI Transmitter And Receiver Model: WHD01, WHD02, WHD03, WHD04, WHD05, WHD06, WHD07, WHD08, WHD09, WHD10 FCC ID: 2BR3D-WHD01 We (Shenzhen Qunyu E-commerce Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only differences the model name. It has no impact on the test data. Signature: Name: Kai Zheng Address: 403, No. 254, Zone 5, Longsheng New Village, Longsheng Community, Dalang Street, Longhua District, Shenzhen City, China

Shenzhen Qunyu E-commerce Co., Ltd Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Device Wireless HDMI Transmitter And Receiver Company name Shenzhen Qunyu E-commerce Co., Ltd Grantee code 2BR3D FCC ID 2BR3D-WHD01 FRN 0037471232 Contact name Kai Zheng Address 403, No. 254, Zone 5, Longsheng New Village, Longsheng Community, Dalang Street, Longhua District, Shenzhen City, China Telephone number 17603022172 E-mail [email protected] Chipset/module information AM9421 Operating System (if applicable) / Storage Capacity (hard drive or other permanent memory storage, if applicable) / 2 Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 3 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher 3 RAM: 1 GB 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; 4 After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Kai Zheng Date: 2025.11.05 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more …

Text truncated - open the document above for the full version.