2BR45-SE-0583-10-3Massager

Product Name：Massager Product model：SE-0583-15-3 Operating Instructions: To use butterfly independently: 1. Press and hold the button on the butterflyfor 3 seconds to activate; a flashing LED lightwill indicate thebutterfly is activated. 2. Press the button to turn on vibrations and back and forth rocking motion. 3. Press the button repeatedly until the desired function is reached. 4. To turn off and deactivate butterfly, press and holdthe button for 3 seconds. The flashing LED will turn off. To use with remote: 1. Press and hold the button on the butterfly for 3 seconds to activate; a flashing LED light will indicate the butterfly is activated. 2. Using the remote, press the XO button once to turn onvibrations and back and forth rocking motion. 3. Press the XO button on the remote repeatedly until the desired function is reached. 4. To turn offbutterfly, press and hold the XO button on the remote for 3 seconds. 5. To deactivate, press and hold button on the butterfly for 3 seconds. The butterfly must be activated to pair with the remote. A flashing LED light will indicate the butterfly is activated. Ensure the butterfly is deactivated after each use to preserve battery life. Butterfly will automatically deactivate after 30 minutes of inactivity. Product has a memory feature and will resume on the last function used. Item # Complete Charging Time Run Time on High Run Time on Low SE-0583-10-3 50 min 35 min 45 min LED light will flash while charging and glow solid when fully charged. Fully charge product before use. Battery life depends on frequency and speed of use. We recommend fully charging your product once every 6 months. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. ISED Statement ‐ English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. ‐ French:Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l’appareil. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps.

Product Name：Massager Product model：SE-0583-10-3 Operating Instructions: To use butterfly independently: 1. Press and hold the button on the butterflyfor 3 seconds to activate; a flashing LED lightwill indicate thebutterfly is activated. 2. Press the button to turn on vibrations and back and forth rocking motion. 3. Press the button repeatedly until the desired function is reached. 4. To turn off and deactivate butterfly, press and holdthe button for 3 seconds. The flashing LED will turn off. To use with remote: 1. Press and hold the button on the butterfly for 3 seconds to activate; a flashing LED light will indicate the butterfly is activated. 2. Using the remote, press the XO button once to turn onvibrations and back and forth rocking motion. 3. Press the XO button on the remote repeatedly until the desired function is reached. 4. To turn offbutterfly, press and hold the XO button on the remote for 3 seconds. 5. To deactivate, press and hold button on the butterfly for 3 seconds. The butterfly must be activated to pair with the remote. A flashing LED light will indicate the butterfly is activated. Ensure the butterfly is deactivated after each use to preserve battery life. Butterfly will automatically deactivate after 30 minutes of inactivity. Product has a memory feature and will resume on the last function used. Item # Complete Charging Time Run Time on High Run Time on Low SE-0583-10-3 50 min 35 min 45 min LED light will flash while charging and glow solid when fully charged. Fully charge product before use. Battery life depends on frequency and speed of use. We recommend fully charging your product once every 6 months. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. ISED Statement ‐ English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. ‐ French:Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l’appareil. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps.

Product Name：Massager Product model：SE-0583-05-3 Operating Instructions: To use butterfly independently: 1. Press and hold the button on the butterflyfor 3 seconds to activate; a flashing LED lightwill indicate thebutterfly is activated. 2. Press the button to turn on vibrations and back and forth rocking motion. 3. Press the button repeatedly until the desired function is reached. 4. To turn off and deactivate butterfly, press and holdthe button for 3 seconds. The flashing LED will turn off. To use with remote: 1. Press and hold the button on the butterfly for 3 seconds to activate; a flashing LED light will indicate the butterfly is activated. 2. Using the remote, press the XO button once to turn onvibrations and back and forth rocking motion. 3. Press the XO button on the remote repeatedly until the desired function is reached. 4. To turn offbutterfly, press and hold the XO button on the remote for 3 seconds. 5. To deactivate, press and hold button on the butterfly for 3 seconds. The butterfly must be activated to pair with the remote. A flashing LED light will indicate the butterfly is activated. Ensure the butterfly is deactivated after each use to preserve battery life. Butterfly will automatically deactivate after 30 minutes of inactivity. Product has a memory feature and will resume on the last function used. Item # Complete Charging Time Run Time on High Run Time on Low SE-0583-10-3 50 min 35 min 45 min LED light will flash while charging and glow solid when fully charged. Fully charge product before use. Battery life depends on frequency and speed of use. We recommend fully charging your product once every 6 months. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. ISED Statement ‐ English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. ‐ French:Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l’appareil. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps.

Product Name：Massager Product model：SE-0077-60-3 Operating Instructions: To use butterfly independently: 1. Press and hold the button on the butterflyfor 3 seconds to activate; a flashing LED lightwill indicate thebutterfly is activated. 2. Press the button to turn on vibrations and back and forth rocking motion. 3. Press the button repeatedly until the desired function is reached. 4. To turn off and deactivate butterfly, press and holdthe button for 3 seconds. The flashing LED will turn off. To use with remote: 1. Press and hold the button on the butterfly for 3 seconds to activate; a flashing LED light will indicate the butterfly is activated. 2. Using the remote, press the XO button once to turn onvibrations and back and forth rocking motion. 3. Press the XO button on the remote repeatedly until the desired function is reached. 4. To turn offbutterfly, press and hold the XO button on the remote for 3 seconds. 5. To deactivate, press and hold button on the butterfly for 3 seconds. The butterfly must be activated to pair with the remote. A flashing LED light will indicate the butterfly is activated. Ensure the butterfly is deactivated after each use to preserve battery life. Butterfly will automatically deactivate after 30 minutes of inactivity. Product has a memory feature and will resume on the last function used. Item # Complete Charging Time Run Time on High Run Time on Low SE-0583-10-3 50 min 35 min 45 min LED light will flash while charging and glow solid when fully charged. Fully charge product before use. Battery life depends on frequency and speed of use. We recommend fully charging your product once every 6 months. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. ISED Statement ‐ English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. ‐ French:Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l’appareil. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps.

Product Name：Massager Product model：SE-0077-58-3 Operating Instructions: To use butterfly independently: 1. Press and hold the button on the butterflyfor 3 seconds to activate; a flashing LED lightwill indicate thebutterfly is activated. 2. Press the button to turn on vibrations and back and forth rocking motion. 3. Press the button repeatedly until the desired function is reached. 4. To turn off and deactivate butterfly, press and holdthe button for 3 seconds. The flashing LED will turn off. To use with remote: 1. Press and hold the button on the butterfly for 3 seconds to activate; a flashing LED light will indicate the butterfly is activated. 2. Using the remote, press the XO button once to turn onvibrations and back and forth rocking motion. 3. Press the XO button on the remote repeatedly until the desired function is reached. 4. To turn offbutterfly, press and hold the XO button on the remote for 3 seconds. 5. To deactivate, press and hold button on the butterfly for 3 seconds. The butterfly must be activated to pair with the remote. A flashing LED light will indicate the butterfly is activated. Ensure the butterfly is deactivated after each use to preserve battery life. Butterfly will automatically deactivate after 30 minutes of inactivity. Product has a memory feature and will resume on the last function used. Item # Complete Charging Time Run Time on High Run Time on Low SE-0583-10-3 50 min 35 min 45 min LED light will flash while charging and glow solid when fully charged. Fully charge product before use. Battery life depends on frequency and speed of use. We recommend fully charging your product once every 6 months. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. ISED Statement ‐ English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. ‐ French:Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l’appareil. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps.

Product Name：Massager Product model：SE-0077-57-3 Operating Instructions: To use butterfly independently: 1. Press and hold the button on the butterflyfor 3 seconds to activate; a flashing LED lightwill indicate thebutterfly is activated. 2. Press the button to turn on vibrations and back and forth rocking motion. 3. Press the button repeatedly until the desired function is reached. 4. To turn off and deactivate butterfly, press and holdthe button for 3 seconds. The flashing LED will turn off. To use with remote: 1. Press and hold the button on the butterfly for 3 seconds to activate; a flashing LED light will indicate the butterfly is activated. 2. Using the remote, press the XO button once to turn onvibrations and back and forth rocking motion. 3. Press the XO button on the remote repeatedly until the desired function is reached. 4. To turn offbutterfly, press and hold the XO button on the remote for 3 seconds. 5. To deactivate, press and hold button on the butterfly for 3 seconds. The butterfly must be activated to pair with the remote. A flashing LED light will indicate the butterfly is activated. Ensure the butterfly is deactivated after each use to preserve battery life. Butterfly will automatically deactivate after 30 minutes of inactivity. Product has a memory feature and will resume on the last function used. Item # Complete Charging Time Run Time on High Run Time on Low SE-0583-10-3 50 min 35 min 45 min LED light will flash while charging and glow solid when fully charged. Fully charge product before use. Battery life depends on frequency and speed of use. We recommend fully charging your product once every 6 months. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. ISED Statement ‐ English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. ‐ French:Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l’appareil. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps.

Product Name：Massager Product model：SE-0077-55-3 Operating Instructions: To use butterfly independently: 1. Press and hold the button on the butterflyfor 3 seconds to activate; a flashing LED lightwill indicate thebutterfly is activated. 2. Press the button to turn on vibrations and back and forth rocking motion. 3. Press the button repeatedly until the desired function is reached. 4. To turn off and deactivate butterfly, press and holdthe button for 3 seconds. The flashing LED will turn off. To use with remote: 1. Press and hold the button on the butterfly for 3 seconds to activate; a flashing LED light will indicate the butterfly is activated. 2. Using the remote, press the XO button once to turn onvibrations and back and forth rocking motion. 3. Press the XO button on the remote repeatedly until the desired function is reached. 4. To turn offbutterfly, press and hold the XO button on the remote for 3 seconds. 5. To deactivate, press and hold button on the butterfly for 3 seconds. The butterfly must be activated to pair with the remote. A flashing LED light will indicate the butterfly is activated. Ensure the butterfly is deactivated after each use to preserve battery life. Butterfly will automatically deactivate after 30 minutes of inactivity. Product has a memory feature and will resume on the last function used. Item # Complete Charging Time Run Time on High Run Time on Low SE-0583-10-3 50 min 35 min 45 min LED light will flash while charging and glow solid when fully charged. Fully charge product before use. Battery life depends on frequency and speed of use. We recommend fully charging your product once every 6 months. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to …

Text truncated - open the document above for the full version.