2BR4S-AIP-Y25Sound & Light Toy / AI Smart Toys

兰 二 二 ； PartName 芯器褶 ;i Hoosmg 。"'""'七"" 窑怂e心 ． 3陨一0-0-0-0 0 lndicatesthat the content of this ha茂rdoussubstance in all homogeneous materials of this component is below the limit specified in the GB/T26572 standard. x indicates that the concentration of this hazardous substance in at least one homogeneous material of this component exceeds the limits specified in the GB / T26572 standard, and there are currently no mature alternative solutions available. Complies with EU RoHS Directive environmental requirements 5.Precautions To ensure safe use of this product, please read and follow the following precautions carefully: !.Usage Safety This product containsa built-in battery. Do not modify or disassemble the battery. Do not expose the battery or proouctto open flames, high temperatures, or direct sunlight. Avoid exposure to extreme heat, punctures, impacts, or disassembly. Charging time must not exceed 6 hours. Ensure adultsupervision durtng cha屯ing,Disconnect the power sou匹beforeleaving the premises or for extended periods of time. If you notireany abnormalities with the battery, cha电ingcable,ordevire (such as defom1ation, overfleatini; unusual odor,, ordamage),stop using It immediately and con扫ctcustomer service to avoid the廿skof electrical leakage, short circuits, or fire. Do not use the devire in humid environments. S沁rethe productin a cool,dry plarewhen not in use. 2.Child Safety Guidelines This product is desi � ned for children's use. Adult supervision and guidance must be provided t roughoutusero ensure safe operation Chi记renmust not use the devire unsupervised, especiallyduringcha rg i 屯 cleanini; ornetworkop七rations 3.Device Inspection and Maintenanre Before use, inspect the product's appearance for damage, verify proper in选llation,and ensure nom1al operation. Do not use if anyabnom1allties ared七尽l七u. Do not perform deaning or maintenance operations while the device is powered on or cha电ing, Do not use alcohol, dete 愣 屯saltwater,hot water, steel woo(compressed air,orsimilarsubstances rdeaning, lnstead, use a dry, soft cloth to gent� w1pethe device's surface. Do notronunue using the product or才"""""""1f they are damaged, loose, or broken, as this may compromise safety or cause device damage. 6.Product lnforma 1. Product Name:Sound & Light Toy / AI Smart Toys 2. Product Model: AIP-Y25-0001-013219 3. Product Material: Fabric: polyester fiber; Filling: 100% polyester fiber {includes motor housing) 4. Product Dimensions: 50*28*15cm 5. Charging Input: 3.7V 6. Battery Charging Limit Voltage: 4.25V 7. Maximum Power, 4.4Wh 8. Battery Type, Lithium-Ion Polymer Battery 9. Battery Rated Capacity, 1200mAh 10. Country of Origin, Mainland China 11. Compliance Standards, GB 31241-2022; GB 6675.1-2014; GB 6675.2-2014; GB 6675.3-2014; GB 6675.4-2014; GB 19865-2005 Product list 1. One NamyAI Smart Plush Toy 2. One Type-C Charging Cable 3. One Product User Manoal 4. One Creation Card S. Multiple gifts 7. Disdaimer Thank you for choosing the Al Smart Plush Toy senes product-Namy. Toensu芘yoursafetyandpro1Ectyourlegal rights, please ca呻l�readthe follow1ngoon1Entbeforeuse. 伪us1ngth,sproduct, you ackn<mledge and agree tothefollow,ng芘rmsandcommttto using the product in a lawfu(appropn啦env,ronmentfor芘in比ndEdpurpose. 1. This product contains small parts. Children underthreeyearsof age must be supervised by an adult when using it. Please咱；ularlyinspectthecasing 叩wi11μu1比,16fordamaga. lfanyabnormal巾esared咄4脰1.cease use 1mmediately.A叩dusing the product in 1心t,011湿wr1hsafety hazards, such as pa巾nglots, escalators, or roads 2. Do not dispose of the product ca飞lessly.We recommend proper recycling to avoid environmental impact 3. Theim唔"也沿1iliu11a心dialogueseni宝ofth盯productarebasedon AJmodelsandm羽oontainerrorsoromissions.The氐�,匕Id但lco啦nt• for, 匕「仁1匕l压onlyand should not be used as a direct basis for actions such as consumption, 笠知区ration,or health jud驴旧芯.Therompanyshall not be liable for any consequences resultingtl1七I七Imm 4. lfyoo usethird·partyservicesthrough this product, pleasecomplywiththe tennsand policies of the relevant third parties Thewmpan;does not guarantee the accuracy or applicability of third·pa rty rontent and shall not be liable for anyronsequencesarisingtl1七l七,from. lfproperty,pe改）nal, or other losses a面ncu咋dduetofailuretocomp� with the above guidelines when using this product, therompany and 酝affili抽partiesshall not be liableforsuch losses. 8.Warranty Card Thisproductisro,e呕垃1thenational"th咚 ， guarantees'policyfromthed啦 ofpu心,ase,and our com pa叩providesa 12-month warranty service for the product Service Type Return Exchan穿 Wa叩nty Sen11r.ePolicy Return within 7 days from the d啦of邸岱ipt due 的productquality issues. Exchange within IS days from the d乖of冗贷,pt due幻productquality issues. Warranty repair within 1 year from the d啦of呕eipt due伈productquality issues. Warranty Policy Undernormal usa罗cond1t1ons1fthe product experiences quality issues due 如non-human伯ctorswithin the warranty period, users are en"tled 1D free repairservices. Please keep the warranty card and pu兀hasereceipt properly. Any a脰ratio旧，fo咽ries,or loss of these documents m羽affect after-salesserv,ce. Thefollowingsituationsarenotro汜redbythewarranty: 1 Exceed1ngthewarrantyperiod; 2. Dama罗causedby human factors (such as drops, liquid ingress, or improperopsrati on); 3. Unauthorized disassembly, flashinr; or unauthorized repairs; 4. Dama罗causedby natural disastersorotherfo心maj印reeven区 5. Productsthathavebeen忘oldand reused; 6. Dama罗causedby ill窀aluse or violation of the user agreemen� 7. Malfunctions not caused byproduct quality issues; 8. lnabilitytoprovidevalidproofofpu心aseorwarrantycard. 9.FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the li…

Text truncated - open the document above for the full version.

Shenzhen Lemilingban Technology Co., Ltd. Covered Equipment Certification Attestation Letter 9/17/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BR4S-AIP-Y25 Shenzhen Lemilingban Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Shenzhen Lemilingban Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Shenzhen Lemilingban Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Jianhua Ding Title: Manager Company Name: Shenzhen Lemilingban Technology Co., Ltd. Date: 9/17/2025

Shenzhen Lemilingban Technology Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: September 17, 2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BR4S-AIP-Y25 Shenzhen Lemilingban Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Shenzhen Lemilingban Technology Co., Ltd. FRN: 0037488368 Address: Room 1206, China Railway Building, Nanshan District, Shenzhen, China Signature: Contact Person: Jianhua Ding Tel: 17372637333 Email: [email protected]

DATE: September 17, 2025 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BR4S-AIP-Y25 Product Name: Sound & Light Toy / AI Smart Toys Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Jianhua Ding Title: Manager Company: Shenzhen Lemilingban Technology Co., Ltd.

Date: September 17, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Jianhua Ding Title: Manager Company: Shenzhen Lemilingban Technology Co., Ltd.

DATE: September 17, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen CCUT Quality Technology Co., Ltd. (1F, Building 35, Changxing Technology Indstrl Park Changzhen Community, Yutang Street,Shenzhen,China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Shenzhen Lemilingban Technology Co., Ltd. (Room 1206, China Railway Building, Nanshan District, Shenzhen, China). <Signature> Name: Jianhua Ding Title: Manager Applicant Company: Shenzhen Lemilingban Technology Co., Ltd.

Shenzhen Lemilingban Technology Co., Ltd. Model Difference Statement FCC ID: 2BR4S-AIP-Y25 DATE: September 17, 2025 Dear Sir/Madam, Added models AIP-Y25-002-013219, AIP-Y25-003-013219, AIP-Y25-004-013219 AIP-Y25-005-013219 basis of the original product AIP-Y25-001-013219. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Jianhua Ding Company name: Shenzhen Lemilingban Technology Co., Ltd. Address: Room 1206, China Railway Building, Nanshan District, Shenzhen, China

Report No: SSP25090004-1&2E FCC ID: 2BR4S-AIP-Y25 Annex of Test Report Annex A. EUT External Photos Model: AIP-Y25-001-013219 EUT View 1 EUT View 2 Report No: SSP25090004-1&2E FCC ID: 2BR4S-AIP-Y25 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25090004-1&2E FCC ID: 2BR4S-AIP-Y25 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25090004-1&2E FCC ID: 2BR4S-AIP-Y25 Annex of Test Report EUT View 7 EUT View 8

Report No: SSP25090004-1&2E FCC ID: 2BR4S-AIP-Y25 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP25090004-1&2E FCC ID: 2BR4S-AIP-Y25 Annex of Test Report Annex B. EUT Internal Photos Model: AIP-Y25-001-013219 EUT Internal View 1 EUT Internal View 2 Report No: SSP25090004-1&2E FCC ID: 2BR4S-AIP-Y25 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP25090004-1&2E FCC ID: 2BR4S-AIP-Y25 Annex of Test Report EUT Internal View 5 EUT Internal View 6 PCB ANT

FCC ID: 2BR4S-AIP-Y25 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 1.05 1(±1) 2 1.585 2402 5 0.491298 3.0 For 2.4GWiFi Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 7.42 7(±1) 8 6.31 2462 5 1.980174 3.0 Remark: antenna gain= 3.57dBi. The device can transmit with 2.4G WI-FI and Bluetooth BLE simultaneously. Calculations for simultaneously transmit Mode Ratios Result Limit Result BLE 0.491298 2.471472 3 PASS 2.4G Wi-Fi 1.980174 Ratios = Power Density / Power density Limit So a SAR test is not required

Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. Antenna OTA Test Report For ESP-ANT-A Customer Shenzhen Sibozhilian Technology Co., Ltd. Demo ESPS3-32 Band 2.4G Color black PRS PN Version V1.0 Issued by Jason Checked by Mem Confirmed by Zhang Date 2025.2.14 一．TEST INSTRUMENTATION CHAMBER SATIMO Chamber Wireless Networking Test Set Agilent E5071C NETWORK ANALYZER Agilent 8753D TEMPERATURE 20±3°C HUMIDITY 50±20%rh GROUND RESISTANCE <0.5R Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. ESPS3-WROOM-32 WiFi Module Antenna Dimension for ESPS3-WROOM-32 Type of Antenna：PCB Antenna Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. 二. Test Results 2.1 Gain and Efficiency Test Freq Efficiency Gain Note Item (MHz) (%) (dBi) Gain 2400 71.32 2.72 Vertical 30° 2412 70.68 3.21 2417 76.51 2.88 2422 77.78 2.67 2427 80.76 2.89 2432 80.11 2.80 2437 75.32 2.64 2442 75.23 2.93 2447 72.99 2.78 2452 70.01 3.12 2457 72.34 3.13 2462 71.32 3.28 2467 72.33 3.24 2472 75.67 3.33 2477 72.12 3.42 2482 80.23 3.57 2500 79.65 3.22 2.2 VSWR (Voltage Standing Wave Ration) Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. Frequency(MHz) 2412 2437 2463 2484 VSWR 1.31 1.17 1.16 1.29 2.3 Antenna S11 Frequency(MHz) 2412 2437 2463 2484 S11 (dB) -17.01 -21.65 -22.52 -18.51 Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. 三. 2-D pattern Plots Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public. Percsson Communication Equipment Co., Ltd This test report belongs to PERCSSON COMMUNICATION EQUIPMENT CO.LTD. and related clients to file,please keeping it propely,without our company and related clients allowed,anybody has no rights to reval it to public.

Report No: SSP25090004-2E FCC Test Report Page 1 of 50 FCC TEST REPORT FCC ID: 2BR4S-AIP-Y25 Report No. : SSP25090004-2E Applicant : Shenzhen Lemilingban Technology Co., Ltd. Product Name : Sound & Light Toy / AI Smart Toys Model Name : AIP-Y25-001-013219 Test Standard : FCC Part 15.247 Date of Issue : 2025-09-17 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090004-2E FCC Test Report Page 2 of 50 Test Report Basic Information Applicant..................................: Shenzhen Lemilingban Technology Co., Ltd. Address of Applicant...............: Room 1206, China Railway Building, Nanshan District, Shenzhen, China Manufacturer..........................: Tianchang Kaimei Toys Co., Ltd. Address of Manufacturer........: No. 5 Tianyi Road, Jinji Town, Tianchang, Anhui Product Name.........................: Sound & Light Toy / AI Smart Toys Brand Name.............................: Namyvera Main Model..............................: AIP-Y25-001-013219 Series Models..........................: AIP-Y25-002-013219, AIP-Y25-003-013219, AIP-Y25-004-013219 AIP-Y25-005-013219 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2013 Date of Test .............................: 2025-09-16 to 2025-09-17 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090004-2E FCC Test Report Page 3 of 50 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results .........................................................................…

Text truncated - open the document above for the full version.

Report No: SSP25090004-1E FCC Test Report Page 1 of 38 FCC TEST REPORT FCC ID: 2BR4S-AIP-Y25 Report No. : SSP25090004-1E Applicant : Shenzhen Lemilingban Technology Co., Ltd. Product Name : Sound & Light Toy / AI Smart Toys Model Name : AIP-Y25-001-013219 Test Standard : FCC Part 15.247 Date of Issue : 2025-09-17 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090004-1E FCC Test Report Page 2 of 38 Test Report Basic Information Applicant..................................: Shenzhen Lemilingban Technology Co., Ltd. Address of Applicant...............: Room 1206, China Railway Building, Nanshan District, Shenzhen, China Manufacturer..........................: Tianchang Kaimei Toys Co., Ltd. Address of Manufacturer........: No. 5 Tianyi Road, Jinji Town, Tianchang, Anhui Product Name.........................: Sound & Light Toy / AI Smart Toys Brand Name.............................: Namyvera Main Model..............................: AIP-Y25-001-013219 Series Models..........................: AIP-Y25-002-013219, AIP-Y25-003-013219, AIP-Y25-004-013219 AIP-Y25-005-013219 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2013 Date of Test .............................: 2025-09-16 to 2025-09-17 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090004-1E FCC Test Report Page 3 of 38 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ..................................................…

Text truncated - open the document above for the full version.