2BR9Z-YT001Anti-lost device

Anti-lost device manual MODEL: YT001 Product operation instructions: 1. Power on: Click the button once, and the product will sound a prompt sound to turn on the device. 2. Shutdown: Press and hold the button for 3 seconds, the product will sound a beep and shut down. 3. Restore factory settings: Press the button 5 times in a row, and press the button for more than 3 seconds the fifth time until you hear a reset prompt sound. For detailed operation,please refer to the equipment operation instructions in the manual. ①Open the Find My application. ②Click "Add Item" in the item list. ③Select "Other supported items" ④Bind APPLE ID after filling in the information. ⑤Complete binding. ⑥Find device: Click to play sound, and the product will emit 10 consecutive short beeps. ⑦Remove the item: Place the device next to the phone, navigate to the app, click on "Play Sound", and confirm that the connection is normal.Click to remove the item. After successful removal, a prompt sound will be emitted by the product. ⑧View serial number 1. Press the button twice, and the buzzer will sound once briefly, indicating that the iPhone has detected the device. 2. In the search app, navigate to the item, scroll down to the bottom, and check the serial number. BATTERY This product has a replaceable CR2032 battery that will last up to 18 months.When the battery runs out you can replace it in 3 simple steps: 1. Loosen the screw(not removable),the back cover can be opened from the button position in the lower right corner. 2. Replace the battery with a new CR2032 type battery,placing the battery positive side up; 3. Close YT001 by aligning the dots on the battery cover and bottom case. It is recormmended to use Panasonic or Maxell CR2032 batteries bacause they are known for their long battery life and reliability. PRIVACY Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad. iPadOS, Mac, macOS and watchOS are the trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. FCC WARNNINGS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenYunkeIntelligentCo.Ltd TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenYunkeIntelligentCo.Ltd ProductDescription:Anti-lostdevice FRN:0037517992 GranteeCode:2BR9Z FCCID:2BR9Z-YT001 ContactName:YongfengDAI Address:303BuildingB,HuafengInternationalRobotIndustrialPark,XixiangStreet,Bao'an District,Shenzhen TelephoneNo:18129831596 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2025/09/30 Applicant’sName: ShenzhenYunkeIntelligentCo.Ltd USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:HardwareengineerTitle:Manager SignatureSignature

Rev 1/26/2023 Shenzhen Yunke Intelligent Co.Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Sept. 26, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BR9Z-YT001 [Shenzhen Yunke Intelligent Co.Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Yunke Intelligent Co.Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Yongfeng DAI Rev 1/26/2023 Shenzhen Yunke Intelligent Co.Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Sept. 26, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BR9Z-YT001 [Shenzhen Yunke Intelligent Co.Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Yongfeng DAI

Ceramic Antenna 3216 Size 2400-2500 MHz P/N: HXD-BT51 SPECIFICATION HXD-3216ANT-BT51_V1.0 Page1 of 8 Sh enzhen Qinx inTechnolog y Co ., Ltd. No. 101, Building A, Dongcheng Road, Liulian Community, Pingshan Street, Ping'an District, Shenzhen City For Miniaturized Bluetooth Syste m 3. Dimensions (Unit : mm) 1). Over View : 1. Fre quency 2400-2500 MHz 2).PCBLYOUTVIEW: 2. Applications HXD-BT51_V1.0 Page2 of 8 Shenzhen QinxinTechnology Co., Ltd. Part Number HM3216ANT2450-HM02 Central Frequency 2450 MHz Bandwidth100(typ.) MHz V. S. W.R≤2.0 Peak Gain4.34 dB i Impedance50 Ohm PolarizationLinear Azimuth BeamwidthOmni-directional 4. Evaluation Board Size and Matching Circ uits 4.7 nH 0.5 pF 5. Electrical Characteristics HXD-BT51_V1.0 Page3 of 8 Shenzhen QinxinTechnology Co., Ltd. Frequency (MHz)240024502500 Efficiency (dB)-1.87-1.67-1.94 Effi ci en cy (%)656864 Gain (dBi) 3.124.343.45 Radiation Pattern & Efficiency 6. Return Loss (S11) HXD-BT51_V1.0 Page4 of 8 7. Shenzhen QinxinTechnology Co., Ltd. .Plastic Tape HXD-BT51_V1.0 Page5 of 8 8. Reflow Solderi ng Standard Condition 9. Packaging and Dimensions Shenzhen QinxinTechnology Co., Ltd. . Remarks for Package Reserv e a length of 150 ~200mm for the tra iler of the carri er and 250 ~300 mm for the leader of the carr er and furt her 250mm of cover tape at the leading part of the carri er. .Reel (6000 pcs/Reel) .Sto rag e Per iod Oxidizable Materi al, 12 months in vacuum sealed bag, please re pack within 168 hours by re -seal the package tre atment after using. Stora ge Tempera ture Range : <30 degre e C, Humidity : <60%RH HXD-BT51_V1.0 Page6 of 8 Shenzhen QinxinTechnology Co., Ltd. Test itemTest condition / Test methodSpecification Solderability IEC 60068-2-58 GB/T2423.28 *Solder bath temperature：240：5°C *Immersion time：2：0.5 sec Solder：Sn96.5Ag3.0Gu0.5 for lead-free. At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) JIS C5101 *Solder bath temperature：260：5°C * Leaching immersion time：10：1 sec Solder : Sn96.5 Ag3.0 Gu0.5 for lead-free. Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat IEC 60068-2-58 GB/T2423.28 *Preheating temperature：120 ~150°C, 1 minute. *Solder temperature：260：5°C *Immersion time：10：1 sec Solder： Sn96.5Ag3.0Gu0.5 for lead-free Measurement to be made after keeping at room temperature for 24：2 hrs. No mechanical damage. Electrical speci fication shall satisfy the descriptions in electrical characteristics at the room temperature. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test IEC 60068-2-32 GB/T2423.8 Customer’s specification. *Height：50 cm *Test Surface: Rigid surface of concrete or steel. *Times：6 surfaces for each units ；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Vibration IEC 60068-2-6 GB/T 2423.10 *Frequency：10Hz ~55Hz ~10Hz(1min) *Total amplitude ：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Adhesive Strength of Terminatio n IEC60068-2-21 GB/T 2423.6 *Pressurizing force： 5N(≦0603)；10N( >0603) *Test time:10：1 sec No remarkable damage or removal of the termination. 10.Dependability Test HXD-BT51_V1.0 Page7 of 8 Shenzhen QinxinTechnology Co., Ltd. Bending test IEC 60068-2-21 GB/T 2423.29 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 2mm and then pressure shall be maintained for 10：1 sec. Measurement to be made after keeping at room temperature for 24：2 hours. No mechanical damage. Electrical specification shall satisfy the descriptions in elec trical characteristics at the room temperature. Temperature cycle IEC60068-2-14 GB/T 2423.22 30 minutes at-40°C：2°C. 10 ~15 minutes at room temperature. 30minutes at +85°C：2°C . 10 ~15 minutes at room temperature. Total 100 continuous cycles Measurement to be made after keeping at room temperature for 24：2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical character istics at the room temperature. High temperature IEC 60068-2-2 GB/T2423.2 *Temperature：85：2°C . *Test duration：500+24/-0 hours. Measurement to be made after keeping at room temperature for 24：2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics. Humidity (steady conditions) IEC60068-2-3 GB/T 2423.3 *Humidity：85：5%R.H. *Temperature：85：2°C . *Time：5 00+24/-0 hrs. Measurement to be made after keeping at room temperature for 24：2 hrs ※ 200hrs measuring the first data then 300hrs data. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Low temperature IEC 60068-2-1 GB/T2423.1 *Temperature：-40：2°C . *Test duration：500+24/-0 hours Measurement to be made after keeping at room te mperature for 24：2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. HXD-BT51_V1.0 Page8 of 8 Shenzhen QinxinTechnology Co., Ltd.

Shenzhen Yunke Intelligent Co.Ltd Family models declaration letter Sept. 26, 2025 We Shenzhen Yunke Intelligent Co.Ltd Of 303 BuildingB, Huafeng International Robot Industrial Park, Xixiang Street, Bao'an District, Shenzhen Declare under our sole responsibility that the product FCC ID: 2BR9Z-YT001 Product: Anti-lost device Model Number: YT001, YT001-A, YT001-A1, YT001-A2, YT001-A3, YT001-A4, YT001-A5, YT001-A6, YT001-B, YT001-B1, YT001-B2, YT001-B3, YT001-B4, YT001-B5, YT001-B6, YT001-C, YT001-C1, YT001-C2, YT001-C3, YT001-C4, YT001-C5, YT001-C6, YT001-D, YT001-D1, YT001-D2, YT001-D3, YT001-D4, YT001-D5, YT001-D6, YT001-E, YT001-E1, YT001-E2, YT001-E3, YT001-E4, YT001-E5, YT001-E6, YT001-F, YT001-F1, YT001-F2, YT001-F3, YT001-F4, YT001-F5, YT001-F6 Except for the model and color, the circuits and modules of all models are the same. Yongfeng DAI/ Hardware engineer E-mail : [email protected] Phone : 18129831596 Fax : 18129831596 Address : 303 BuildingB, Huafeng International Robot Industrial Park, Xixiang Street, Bao'an District, Shenzhen

Shenzhen Yunke Intelligent Co.Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 26, 2025 Subject; Request for Confidentiality FCC ID: 2BR9Z-YT001 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yongfeng DAI Title: Hardware engineer

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Yunke Intelligent Co.Ltd Date: Sept. 26, 2025 Product Model Number: YT001, YT001-A, YT001-A1, YT001-A2, YT001-A3, YT001-A4, YT001-A5, YT001-A6, YT001-B, YT001-B1, YT001-B2, YT001-B3, YT001-B4, YT001-B5, YT001-B6, YT001-C, YT001-C1, YT001-C2, YT001-C3, YT001-C4, YT001-C5, YT001-C6, YT001-D, YT001-D1, YT001-D2, YT001-D3, YT001-D4, YT001-D5, YT001-D6, YT001-E, YT001-E1, YT001-E2, YT001-E3, YT001-E4, YT001-E5, YT001-E6, YT001-F, YT001-F1, YT001-F2, YT001-F3, YT001-F4, YT001-F5, YT001-F6 FCC ID: 2BR9Z-YT001 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Hardware engineer Email: [email protected] Telephone: 18129831596 On behalf of: Shenzhen Yunke Intelligent Co.Ltd

Ext Photos Model: YT001 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Model:YT001 SN:20250910000000 FCC ID:2BR9Z-YT001 Made in china 18.91 mm

Int Photos Model: YT001 Photo 1 Photo 2 Photo 3 Photo 4 ANT

- Page 1 of 10 - Report No.: HB20250917055E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Anti-lost device Trade Mark: Model Number: YT001 FCC ID: 2BR9Z-YT001 Prepared for Shenzhen Yunke Intelligent Co.Ltd 303 BuildingB, Huafeng International Robot Industrial Park, Xixiang Street, Bao'an District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 10 - Report No.: HB20250917055E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 STANDALONE SAR TEST EXCLUSION CONSIDERATIONS........................................................................................................ 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Result ................................................................................................................................................. 10 - Page 3 of 10 - Report No.: HB20250917055E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Yunke Intelligent Co.Ltd Address ................................. : 303 BuildingB, Huafeng International Robot Industrial Park, Xixiang Street, Bao'an District, Shenzhen Manufacturer's Name .......... : Shenzhen Yunke Intelligent Co.Ltd Address ................................. : 303 BuildingB, Huafeng International Robot Industrial Park, Xixiang Street, Bao'an District, Shenzhen Product description Product name ........................ : Anti-lost device Model Number ....................... : YT001 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 447498 D01 General RF Exposure Guidance v06 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Sept. 17, 2025~Sept. 26, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : (G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 10 - Report No.: HB20250917055E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Sept. 26, 2025 Original - Page 5 of 10 - Report No.: HB20250917055E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com 1 General Description 1.1 Description of EUT Product name: Anti-lo…

Text truncated - open the document above for the full version.

- Page 1 of 47 - Report No.: HB20250917055E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Anti-lost device Trade Mark: Model Number: YT001 FCC ID: 2BR9Z-YT001 Prepared for Shenzhen Yunke Intelligent Co.Ltd 303 BuildingB, Huafeng International Robot Industrial Park, Xixiang Street, Bao'an District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 47 - Report No.: HB20250917055E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 6 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 6 1.2 TEST MODE .............................................................................................................................................................. 6 1.3 OPERATION CHANNEL LIST ........................................................................................................................................... 7 1.4 TEST SETUP .............................................................................................................................................................. 7 1.5 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 7 1.6 ANCILLARY EQUIPMENT .............................................................................................................................................. 7 2 SUMMARY OF TEST RESULT ............................................................................................................................. 8 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 9 3.1 TEST LABORATORY ..................................................................................................................................................... 9 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 9 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 9 3.4 TEST SOFTWARE ...................................................................................................................................................... 10 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 11 5 TEST ITEM AND RESULTS ............................................................................................................................... 13 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 13 5.1.1 Standard Requirement ............................................................................................................................. 13 5.1.2 Test Result ................................................................................................................................................. 13 5.2 CONDUCTED EMISSION ............................................................................................................................................. 14 5.2.1 Limits ........................................................................................................................................................ 14 5.2.2 Test Procedures ......................................................................................................................................... 14 5.2.3 Test Setup.................................................................................................................................................. 15 5.2.4 Test Result ................................................................................................................................................. 15 5.3 RADIATED EMISSION ................................................................................................................................................ 16 5.3.1 Limits ........................................................................................................................................................ 16 5.3.2 Test Procedures ......................................................................................................................................... 16 5.3.3 Test Setup.................................................................................................................................................. 16 5.3.4 Test Result ................................................................................................................................................. 17 5.3.5 Band Edge - Radiated ............................................................................................................................... 21 5.3.6 Spurious emission in restricted band 1000MHz-25000MHz .................................................................... 22 5.4 PEAK OUTPUT …

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: YT001 Radiated Emission Below 1GHz Radiated Emission Above 1GHz