2BRHY-T015Detector

user's manual Infrared Lamps Windows Windows I. Product description Highest sensitivity indicator Low-sensitivity lamp Magnetic Field Detector Burglar alarm light Flashlight switch Signal sensitivity/ Infrared scan switch Night vision detection lamp Power button/ Volume and vibration switch Charging indicator light Medium Sensitivity Lamp Wireless Detection Mode Lamp High-sensitivity lamp Function switch key II. Product Profile III. Product Precautions IV. Operating instructions Please read the instructions before use and use this product correctly. This product is a multi-functional detector, adopting active infrared scanning and passive wireless scanning combined way, can detect a variety of hidden cameras, bugs, locators, wireless routers, including wired and wireless products, the product wireless detection function can detect about 10-30 square metres within the range of all the wireless devices to effectively prevent the leakage of your personal privacy and property. 1. Entering the room, please turn off and unplug all network-relat- ed communication devices to prevent the machine has been issued by the alarm chirps 2. If the camera is not detected in wireless mode, please switch to infrared detection mode. 3. Sensitivity adjustment key can adjust the machine alarm sensitivity intensity, such as the machine always alarm chirping state, please lower the signal level and re-adjustment. 4. If you need to mute the machine, you can short press the power-on button again to switch off the sound to vibration, cycle switching. 5. Charging mode: red light when charging, green light when full, please do not use 5V/1A power other than charging to avoid excessive power damage to the machine. Switch on key: Long press the switch on/off key for about 3 seconds, you will hear a ‘drop’ blue light to enter the wireless detection mode. This mode can detect all wireless (including Bluetooth, GPS, eavesdropping devices) devices within a range of about 10-30 square metres with an alarm beep. Infrared detection: short press the function key four infrared lamps light up into the infrared scanning mode (please turn off the indoor lights), this mode every time you press the Sensitive V. Scope of application adjustment key infrared light blinking frequency to speed up, please put your eyes close to the infrared window, through the instrument scanning the surroundings Find the hidden lens Magnetic field detection: short press the function key green light on to enter the magnetic field detection mode, the machine will be close to the source of the magnetic field, the closer the magnetic field the white light is more intense, indicating that the surrounding environment contains a magnetic field or a strong magnetic suspects the presence of objects. Infrared night vision detection: short press the function key blue light into the camera night vision light detection mode, the machine issued a ‘drop’ alarm beep prompt. (This function is only for indoor use) Anti-theft function: short press the function key yellow light into the anti-theft mode, touch the machine vibration will sound the alarm. Switch off key: Long press the on/off key for about 3 seconds, hear the ‘drop’ sound to switch off the machine is complete. Torch: Press and hold the torch button for approximately 5 seconds to activate steady illumination. When the light is steady, press briefly to switch to slow-flashing mode. 1.Hotel travelling 2.Public entertainment places 3 Shopping mall fitting rooms 4.People who contact and keep trade secrets 5.Security personnel of business secrets and technical secrets places 6.Professionals in anti-photography, anti-eavesdropping 7.Business meetings Caution:Please strictly abide by the relevant laws of the country in which you are using this product, and do not use this product for any illegal purposes, otherwise you will be responsible for the consequences. Flashlight FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Rev 1/26/2023 Shenzhen Luwei Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 20, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BRHY-T015 [Shenzhen Luwei Technology Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Luwei Technology Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24- 886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Jing Hu Rev 1/26/2023 Shenzhen Luwei Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 20, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BRHY-T015 [Shenzhen Luwei Technology Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Jing Hu

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenLuweiTechnologyCo.,Ltd TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenLuweiTechnologyCo.,Ltd ProductDescription:Detector FRN:0037382439 GranteeCode:2BRHY FCCID:2BRHY-T015 ContactName:JingHu Address:Room402,Building11,JinguanHuating,FenghuangAvenue,FenghuangCommunity, PinghuStreet,LonggangDistrict,Shenzhen TelephoneNo:13650162301 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2025/11/20 Applicant’sName: ShenzhenLuweiTechnologyCo.,Ltd USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:CTOTitle:Manager SignatureSignature

Shenzhen Luwei Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 20, 2025 Subject; Request for Confidentiality FCC ID: 2BRHY-T015 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jing Hu Title: CTO

Shenzhen Luwei Technology Co., Ltd Date: Nov. 20, 2025 Product Model Number: T015 FCC ID: 2BRHY-T015 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: CTO Email: [email protected] Telephone: 13650162301 On behalf of: Shenzhen Luwei Technology Co., Ltd

Ext Photos Model: T015 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

DetectorModel:T015FCCID:2BRHY-T015 18mm 6.7mm 75mm 25.6mm 12.6mm 26mm 6.7mm

Int Photos Model: T015 Photo 1 Photo 2 Photo 3 Photo 4 RX ANT Photo 5 Photo 6 Photo 7

- Page 1 of 27 - Report No.: HB20251105055E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Declaration of Conformity Product: Detector Trade Mark: N/A Model Number: T015 FCC ID: 2BRHY-T015 Prepared for Shenzhen Luwei Technology Co., Ltd Room 402, Building 11, Jinguan Huating, Fenghuang Avenue, Fenghuang Community, Pinghu Street, Longgang District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 27 - Report No.: HB20251105055E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 SUMMARY OF TEST RESULT ............................................................................................................................... 6 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 3.1 TEST LABORATORY ..................................................................................................................................................... 7 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 3.4 TEST SOFTWARE ........................................................................................................................................................ 7 4 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 5 EMC EMISSION TEST .......................................................................................................................................... 9 5.1 CONDUCTED EMISSION ............................................................................................................................................... 9 5.2 RADIATED EMISSION ................................................................................................................................................ 13 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................19 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................21 - Page 3 of 27 - Report No.: HB20251105055E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Luwei Technology Co., Ltd Address ................................. : Room 402, Building 11, Jinguan Huating, Fenghuang Avenue, Fenghuang Community, Pinghu Street, Longgang District, Shenzhen Manufacturer's Name .......... : Shenzhen Luwei Technology Co., Ltd Address ................................. : Room 402, Building 11, Jinguan Huating, Fenghuang Avenue, Fenghuang Community, Pinghu Street, Longgang District, Shenzhen Product description Product name ........................ : Detector Model Number ....................... : T015 Standards ............................. : E-CFR Title 47 Part 15 Subpart B Test procedure ..................... : ANSI C63.4: 2014 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Nov. 05, 2025~Nov. 13, 2025 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 27 - Report No.: HB20251105055E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Nov. 13, 2025 Original - Page 5 of 27 - Report No.: HB20251105055E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Str…

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: T015 Radiated Emission Below 1GHz Radiated Emission Above 1GHz Conducted Emission