2BRPZ1282.4GHz Digital Wireless System(Monitor+Camera)

Guangzhou Weitech Co., LTD 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Dec. 30, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BRPZ128 Guangzhou Weitech Co., LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Isa Liang Title: Assistant Address: 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China Tel.: 8615918797018 Email: [email protected]

Guangzhou Weitech Co., LTD 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Dec. 30, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BRPZ128 Product Name: 2.4GHz Digital Wireless System(Monitor+Camera) This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Isa Liang Title: Assistant Address: 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China Tel.: 8615918797018 Email: [email protected] Guangzhou Weitech Co., LTD 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Guangzhou Weitech Co., LTD 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China Date: 2025/12/30 Dear Sir/Madam, We, Guangzhou Weitech Co., LTD, Hereby declares the following statement, PCB board, circuit, structure and internal of these model(s) are the same, Only model name and appearance are different for these model: Product name: 2.4GHz Digital Wireless System(Monitor+Camera) FCC ID: 2BRPZ128 Model no.: CW0101+MW0101, MW0101+CW0102, MW0101+CW0103, MW0101+CW0104, MW0101+CW0105, MW0101+CW0106, MW0101+CW0107, MW0101+CW0108, MW0102+CW0101, MW0103+CW0101, MW0104+CW0101, MW0105+CW0101, MW0106+CW0101, MW0107+CW0101, MW0108+CW0101, MW0102+CW0102, MW0103+CW0102, MW0104+CW0102, MW0105+CW0102, MW0106+CW0102, MW0103+CW0103 Sincerely, Name/Title： Isa Liang / Assistant Company: Guangzhou Weitech Co., LTD Address: 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China Phone: 8615918797018 Fax: N/A E-Mail: [email protected]

Guangzhou Weitech Co., LTD 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China December 30, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BRPZ128 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of 45 days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. ⎯ User Manual ⎯ Internal Photos Sincerely, Title: Assistant Address: 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China Tel.: 8615918797018 Email: [email protected]

Guangzhou Weitech Co., LTD 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China December 30, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BRPZ128 I, the undersigned, hereby authorize Shenzhen Tongzhou Testing Co.,Ltd. to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by Shenzhen Tongzhou Testing Co.,Ltd. shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Guangzhou Weitech Co., LTD. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Isa Liang Assistant Tel: 8615918797018 Fax: N/A Email: [email protected]

Report No.: TZ0120250401PH02 Page 1 of 4 External Photographs of EUT External Photo 1 External Photo 2 Report No.: TZ0120250401PH02 Page 2 of 4 External Photo 3 External Photo 4 Report No.: TZ0120250401PH02 Page 3 of 4 External Photo 5 External Photo 6 Report No.: TZ0120250401PH02 Page 4 of 4 External Photo 7

Label Location FCC ID: 2BRPZ128

FCC ID: 2BRPZ128 Page 1 of 2 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd RADIO FREQUENCY EXPOSURE Limit According to section B.4 of 447498 D04 Interim General RF Exposure Guidance v01 SAR-based thresholds are derived based on frequency, power, and separation distance of the RF source. The formula defines the thresholds in general for either available maximum time-averaged power or maximum time-averaged ERP, whichever is greater. If the ERP of a device is not easily determined, such as for a portable device with a small form factor, the applicant may use the available maximum time-averaged power exclusively if the device antenna or radiating structure does not exceed an electrical length of λ/4. As for devices with antennas of length greater than λ/4 where the gain is not well defined, but always less than that of a half-wave dipole (length λ/2), the available maximum time-averaged power generated by the device may be used in place of the maximum time-averaged ERP, where that value is not known. The separation distance is the smallest distance from any part of the antenna or radiating structure for all persons, during operation at the applicable ERP. In the case of mobile or portable devices, the separation distance is from the outer housing of the device where it is closest to the antenna. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold Pth (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by Formula (B.2). Where and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). FCC ID: 2BRPZ128 Page 2 of 2 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Results RF Exposure at Separation distance (cm): 20 Mode Antenna Frequency [MHz] Conducted Power [dBm] Manufacturing tolerance Antenna Gain [dBi] Max of ERP and Conducted Power including Tune Up SAR- based exemption threshold Pth [mW] Target Power [dBm] Tolerance ±[dB] [dBm] [mW] SRD Ant1 2403 18.06 17.5 1 3.28 19.63 91.83 3060.00 SRD Ant1 2441 17.85 17.5 1 3.28 19.63 91.83 3060.00 SRD Ant1 2478 16.86 16.5 1 3.28 18.63 72.95 3060.00 SRD Ant1 2403 15.25 15 1 3.28 17.13 51.64 3060.00 SRD Ant1 2441 14.91 14.5 1 3.28 16.63 46.03 3060.00 SRD Ant1 2478 14.26 14 1 3.28 16.13 41.02 3060.00 SRD Ant1 2403 15.56 15 1 3.28 17.13 51.64 3060.00 SRD Ant1 2441 15.17 14.5 1 3.28 16.63 46.03 3060.00 SRD Ant1 2478 14.53 14 1 3.28 16.13 41.02 3060.00 Max of ERP and Conducted Power including Tune Up (dBm) = Max Conducted Tune Up Power(dBm) and Max Conducted Tune Up Power(dBm) + Antenna Gain(dBi)-2.15), whichever is greater. The Maximum Erp is used for Routine Evaluation Exemption according to B.4 of 447498 D04 Interim General RF Exposure Guidance v01. So, the SAR evaluation is not required.

Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 1 of 49 Appendix Test Data for 16QAM (Conducted Measurement) Product Name: 2.4GHz Digital Wireless System(Monitor+Camera) Trade Mark: (TVH), (AgriEyes), (LITLEDA), (NSD), (TECHNI-POWER), (BUYERS PRODUCTS COMPANY) (DUN-BRI GROUP), (PROSIGNAL) Test Model: CW0101+MW0101 FCC ID: 2BRPZ128 Environmental Conditions Temperature: 23.5°C Relative Humidity: 58% ATM Pressure: 100.0 kPa Test Engineer: Allen Lai Supervised by: Max Zhang NOTE N/A Appendix A: DTS Bandwidth Test Result Test Mode Antenna Frequency [MHz] DTS BW [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict 16QAM Ant1 2403 2.810 2401.680 2404.490 0.5 PASS 16QAM Ant1 2441 3.240 2439.470 2442.710 0.5 PASS 16QAM Ant1 2478 3.320 2476.430 2479.750 0.5 PASS BPSK Ant1 2403 3.020 2401.580 2404.600 0.5 PASS BPSK Ant1 2441 3.200 2439.340 2442.540 0.5 PASS BPSK Ant1 2478 3.100 2476.420 2479.520 0.5 PASS QPSK Ant1 2403 2.960 2401.580 2404.540 0.5 PASS QPSK Ant1 2441 3.100 2439.520 2442.620 0.5 PASS QPSK Ant1 2478 3.140 2476.480 2479.620 0.5 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 2 of 49 Test Graphs 16QAM-Ant1-2403-PASS 16QAM-Ant1-2441-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 3 of 49 16QAM-Ant1-2478-PASS BPSK-Ant1-2403-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 4 of 49 BPSK-Ant1-2441-PASS BPSK-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 5 of 49 QPSK-Ant1-2403-PASS QPSK-Ant1-2441-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 6 of 49 QPSK-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 7 of 49 Appendix B: Occupied Channel Bandwidth Test Result Test Mode Antenna Frequency [MHz] OCB [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict 16QAM Ant1 2403 3.9771 2401.0094 2404.9865 --- --- 16QAM Ant1 2441 3.9475 2439.0317 2442.9792 --- --- 16QAM Ant1 2478 3.9938 2475.9922 2479.9860 --- --- BPSK Ant1 2403 3.9295 2401.0384 2404.9679 --- --- BPSK Ant1 2441 3.9179 2439.0255 2442.9434 --- --- BPSK Ant1 2478 3.9101 2476.0543 2479.9644 --- --- QPSK Ant1 2403 3.9576 2401.0245 2404.9821 --- --- QPSK Ant1 2441 3.9572 2439.0140 2442.9712 --- --- QPSK Ant1 2478 3.9605 2476.0202 2479.9807 --- --- Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 8 of 49 Test Graphs 16QAM-Ant1-2403 16QAM-Ant1-2441 Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 9 of 49 16QAM-Ant1-2478 BPSK-Ant1-2403 Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 10 of 49 BPSK-Ant1-2441 BPSK-Ant1-2478 Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 11 of 49 QPSK-Ant1-2403 QPSK-Ant1-2441 Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 12 of 49 QPSK-Ant1-2478 Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 13 of 49 Appendix C: Maximum peak conducted output power Test Result Peak Test Mode Antenna Frequency [MHz] Conducted Peak Power [dBm] Conducted Limit [dBm] Verdict 16QAM Ant1 2403 18.85 ≤30 PASS 16QAM Ant1 2441 19.08 ≤30 PASS 16QAM Ant1 2478 18.38 ≤30 PASS BPSK Ant1 2403 16.59 ≤30 PASS BPSK Ant1 2441 16.53 ≤30 PASS BPSK Ant1 2478 15.82 ≤30 PASS QPSK Ant1 2403 17.86 ≤30 PASS QPSK Ant1 2441 17.61 ≤30 PASS QPSK Ant1 2478 17.03 ≤30 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 14 of 49 Test Graphs Peak 16QAM-Ant1-2403-PASS 16QAM-Ant1-2441-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 15 of 49 16QAM-Ant1-2478-PASS BPSK-Ant1-2403-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 16 of 49 BPSK-Ant1-2441-PASS BPSK-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 17 of 49 QPSK-Ant1-2403-PASS QPSK-Ant1-2441-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 18 of 49 QPSK-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 19 of 49 Appendix D: Maximum peak power spectral density Test Result Test Mode Antenna Frequency [MHz] Result [dBm/3kHz] Limit [dBm/3kHz] Verdict 16QAM Ant1 2403 -1.65 ≤8.00 PASS 16QAM Ant1 2441 -1.88 ≤8.00 PASS 16QAM Ant1 2478 -2.66 ≤8.00 PASS BPSK Ant1 2403 -1.97 ≤8.00 PASS BPSK Ant1 2441 -2.42 ≤8.00 PASS BPSK Ant1 2478 -2.96 ≤8.00 PASS QPSK Ant1 2403 -2.01 ≤8.00 PASS QPSK Ant1 2441 -2.52 ≤8.00 PASS QPSK Ant1 2478 -3.01 ≤8.00 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 20 of 49 Test Graphs 16QAM-Ant1-2403-PASS 16QAM-Ant1-2441-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 21 of 49 16QAM-Ant1-2478-PASS BPSK-Ant1-2403-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 22 of 49 BPSK-Ant1-2441-PASS BPSK-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 23 of 49 QPSK-Ant1-2403-PASS QPSK-Ant1-2441-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 24 of 49 QPSK-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 25 of 49 Appendix E: Band edge measurements Test Result Test Mode Antenna Ch. Name Frequency [MHz] Ref. Level [dBm] Result [dBm] Limit [dBm] Verdict 16QAM Ant1 Low 2403 6.92 -25.72 ≤-13.08 PASS 16QAM Ant1 High 2478 6.04 -40.33 ≤-13.96 PASS BPSK Ant1 Low 2403 9.24 -23.41 ≤-10.76 PASS BPSK Ant1 High 2478 6.84 -41.21 ≤-13.16 PASS QPSK Ant1 Low 2403 8.57 -25.26 ≤-11.43 PASS QPSK Ant1 High 2478 8.06 -41.48 ≤-11.94 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 26 of 49 Test Graphs 16QAM-Ant1-2403-PASS 16QAM-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 27 of 49 BPSK-Ant1-2403-PASS BPSK-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250401FRF12 Page 28 of 49 QPSK-Ant1-2403-PASS QPSK-Ant1-2478-PASS Appendix Test Data of the Report No.: TZ0120250…

Text truncated - open the document above for the full version.

Report No.: TZ0120250401FRF12 Page 1 of 31 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. TEST REPORT Report Number : TZ0120250401FRF12 Product Name : 2.4GHz Digital Wireless System(Monitor+Camera) Model / Type reference : CW0101+MW0101, MW0101+CW0102, MW0101+CW0103, MW0101+CW0104, MW0101+CW0105, MW0101+CW0106, MW0101+CW0107, MW0101+CW0108, MW0102+CW0101, MW0103+CW0101, MW0104+CW0101, MW0105+CW0101, MW0106+CW0101, MW0107+CW0101, MW0108+CW0101, MW0102+CW0102, MW0103+CW0102, MW0104+CW0102, MW0105+CW0102, MW0106+CW0102, MW0103+CW0103 FCC ID : 2BRPZ128 Prepared for : Guangzhou Weitech Co., LTD 6th Floor,Building B,No.8 Ciguling Road,Huadong, Huadu District, Guangzhou, China Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : FCC CFR Title 47 Part 15C, ANSI C63.10-2020 Date of Test : 2025-10-11 ~ 2025-11-13 Date of Issue : 2025-11-14 Prepared by : Lena Wen Reviewed by : Allen Lai Approved by : Max Zhang (Authorized Officer) Report No.: TZ0120250401FRF12 Page 2 of 31 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2025-11-14 Valid Initial release Report No.: TZ0120250401FRF12 Page 3 of 31 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N ........................................................ 4 1.1. Client Information ................................................................................................................... 4 1.2. Description of Device (EUT) ................................................................................................... 4 1.3. Wireless Function Tested in this Report .............................................................................. 5 1.4. EUT configuration ................................................................................................................... 5 1.5. Description of Test Facility .................................................................................................... 5 1.6. Statement of the Measurement Uncertainty ......................................................................... 6 1.7. Measurement Uncertainty ...................................................................................................... 6 1.8. Description of Test Modes ..................................................................................................... 6 1.9. Frequency of Channels .......................................................................................................... 7 2. T E S T M E T H O D O L O G Y ............................................................ 8 2.1. EUT Configuration .................................................................................................................. 8 2.2. EUT Exercise ........................................................................................................................... 8 2.3. Test Sample ............................................................................................................................. 8 3. S Y S T E M T E S T C O N F I G U R A T I O N .............................................. 9 3.1. Justification ............................................................................................................................. 9 3.2. EUT Exercise Software ........................................................................................................... 9 3.3. Special Accessories ............................................................................................................... 9 3.4. Block Diagram/Schematics .................................................................................................... 9 3.5. Equipment Modifications ....................................................................................................... 9 3.6. Test Setup ................................................................................................................................ 9 4. S U M M A R Y O F T E S T R E S U L T S ................................................ 10 5. T E S T R E S U L T ..................................................................... 11 5.1. On Time and Duty Cycle ....................................................................................................... 11 5.2. Maximum Peak Conducted Output Power Measurement ................................................. 12 5.3. Power Spectral Density Measurement ................................................................................ 13 5.4. 6 dB Spectrum Bandwidth and Occupied Channel Bandwidth Measurement ............... 14 5.5. Radiated Emissions Measurement ...................................................................................... 15 5.6. Conducted Spurious Emissions and Band Edges Test .................................................... 24 5.8. Band-edge measurements for radiated emissions ........................................................... 26 5.9. Antenna Requirements ......................................................................................................... 29 6. L I S T O F M E A S U R I N G E Q U I P M E N T .......................................... 30 7. T E S T S E T U P P H O T O G R A P H S O F E U T ...................................... 31 8. E X T E R I O R P H O T O G R A P H S O F E U T .....................…

Text truncated - open the document above for the full version.

Report No.: TZ0120250401PH01 Page 1 of 2 Test Setup Photos of the EUT Radiated Emission Below 1GHz Radiated Emission Above 1GHz Report No.: TZ0120250401PH01 Page 2 of 2 RF Conducted Test