2BS2I-MATE06Smart Scalp Serum Applicator

This product is a scalp care device that can regularly dispense foamed liquid medicine and serum. It also has multiple functions such as EMS microcurrent, red light, blue light, red & blue light therapy, and micro-vibration massage, aiming to provide you with a comprehensive and convenient scalp care experience to care for your hair. 2、 EMS mode Vibration mode Liquid dispensing mode Red light / Blue light / Red & blue light / O Level 1-8 / O Low / Medium / High / O Dispensing time: 30-second dispensing / 1-minute dispensing / O All the above working modes are set via the APP. Among them, the set working status of EMS, vibration, and liquid dispensing modes will only take eect when the device's touch sensing teeth are in contact with the scalp. The touch sensing status cannot be set. Azure Cloud Mate06 Smart Scalp Serum Applicator Product Introduction Product Structure Foam compartment cover Liquid outlet teeth ×4 EMS teeth ×6 sensing Touch teeth ×2 Liquid dispensing mode status indicator light Power/charging indicator light Power switch Protective cover Type-C charging port Function Introduction 1、Button Function Introduction Power switch Button Function Button Name Long press Power on/o Long press to enable the default facto mode (Red light + EMS level 1 + 1-minute liquid dispensing + low vibration) Sho press Sho press the power key once to retract the liquid compament plunger to the initial position with one click, and reset the liquid dispensing output time. (Sho press once when the plunger is in the middle position to pause the plunger without resetting the liquid dispensing time.) Working Mode Light therapy mode Warm reminder: Mode Name Selectable Working Status 4、Low batte reminder: 3、Indicator Light Introduction 5、Sma power-o: 6、Sma sensing: (1) When the device is powered on, liquid dispensing, vibration, and EMS will only sta when the touch sensing teeth are in contact with the scalp. To ensure the liquid reaches the scalp directly, liquid dispensing, vibration, and EMS will stop immediately if the touch sensing teeth leave the scalp or are blocked by hair. (2) The eective sensing time for a single touch on the touch sensing teeth is about 15 seconds. After 15 seconds, you need to release the sensing teeth and touch again for the output to take eect again. When the device is powered on and the batte is low, all lights will ash 5 times simultaneously. The device will automatically shut down after the reminder. Please charge it in time. The device automatically shuts down after 5 minutes of standby. After turning on the device, if there is no APP control operation, no key operation, and no touch operation on the touch sensing teeth, it will shut down by default after 5 minutes. (1) Power/charging indicator light: After powering on, the power indicator light ashes for 15 seconds to prompt the user to connect via Bluetooth, and stays on after 15 seconds. The indicator light ashes when the device is charging and stays on when fully charged. (2) Liquid dispensing mode status indicator light: When the liquid dispensing mode is set in the APP: The indicator light stays on when the touch sensing teeth detect contact during a single dispensing period, and turns o when no contact is detected. The indicator light ashes while the liquid tank plunger is retracting, and turns o when retraction is complete. When no liquid dispensing mode is set: The indicator light is o. First-time use guide: 1.For Android or iOS phones, search for the "MY Sma Care" APP in the app market or App Store, then download and install it. 2.Before connecting, the APP will pop up a prompt to grant permissions. Click "OK" to grant the relevant permissions. 3.Turn on your phone's Bluetooth, power on the device, open the "MY Sma Care" APP, click "Add Sma Device", swipe the product list to nd your device and click it. The APP will automatically connect to the selected care device. Precautions 4.After successful connection, the APP will automatically enter the product operation inteace. Usage Steps 1.Rotate the foam compament cover counterclockwise and remove it. 2.Add an appropriate amount of foamed liquid medicine into the compament, cover it, and tighten clockwise. 3.Turn on your phone's Bluetooth and open the "MY Sma Care" APP. Connect this device to your phone. Set your desired care mode via the APP inteace. 4.Press the device head rmly against the skin. It is recommended to use continuous circular motions or slide at a constant speed. 5.After use, use the cleaning pin to remove residual liquid from the liquid outlet teeth, clean other pas, and store the device in a well-ventilated, d place. 1.When cleaning the device body and applicator head, do not use chemical detergents or cleaning products containing mercu, alkaline, or acidic ingredients. 2.Do not immerse the device in water or place it in humid environments (e.g., bathrooms) to prevent sho circuits. 3.If liquid dispensing is not smooth during use, use the cleaning pin to unclog the liquid outlet teeth for smoother ow. 4.Do not use or store the device in high-temperature environments, as this may cause damage due to excessive heat. 5.If the device is not used for a long time, clean it regularly to maintain hygiene, peormance, and lifespan. Keep the batte at around 50% charge and peorm a full charge-discharge cycle periodically to maintain batte health. Package Contents 6.Use only the original charging cable. Avoid using damaged cables and keep the device away from ammable and explosive materials while charging. 7.Do not disassemble, strike, or drop the device. Store it out of reach of children and pets. 8.When using serums of dierent specications or brands, thoroughly clean the foam compament to avoid interactions between dierent products. 9.This device is not a medical device and cannot be used to treat diseases. Consult a doctor before use if you have any medical conditions or health concerns. 10.Use only external…

Text truncated - open the document above for the full version.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: Companyname:HOPEKCORPORATIONINC FRN:0034562900 ContactName:YangyangXu Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates TelephoneNo:561-875-9826 Email:[email protected] Applicant: Companyname:Mirya(Shenzhen)Technologyco.,Ltd. GranteeCode:2BS2I FCCID:2BS2I-MATE06 FRN:0037636412 ContactName:YuanwangXU Address:FactoryBuildingNo.5119,Zone2,FuqiaoIndustrialZone,Heping Community,FuhaiSubdistrict,Bao’anDistrict,Shenzhen,China TelephoneNo:18666903872 FaxNo:/ Email:[email protected] Mirya(Shenzhen)Technologyco.,Ltd.certifiesthat,asofthedateofthisfilingoftheapplication withtheTCB,[HOPEKCORPORATIONINC]isourdesignatedUSagentforserviceofprocess fortheabovereferencedFCCID.Mirya(Shenzhen)Technologyco.,Ltd.acceptstomaintain anagentfornolessthanoneyearafterthegranteehasterminatedallmarketingandimportation ortheconclusionofanycommissionrelatedproceedinginvolvingequipment.[HOPEK CORPORATIONINC]accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedUSagentforserviceofprocessfortheabovereferenceFCCID. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. Date:2026-05-25 Applicant’sName:YuanwangXUUSAgent’sName:YangyangXu Title:GeneralManagerTitle:Manager Signature:Signature:

Mirya (Shenzhen) Technology co.,Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Mirya (Shenzhen) Technology co.,Ltd. Address: Factory Building No.5119, Zone 2, Fuqiao Industrial Zone, Heping Community, Fuhai Subdistrict, Bao’an District, Shenzhen, China Product Name: Smart Scalp Serum Applicator FCC ID: 2BS2I-MATE06 Model(s): Azure Cloud Mate06 2.911(d)(5)(i) Equipment Type We, [Mirya (Shenzhen) Technology co.,Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Date: May 25, 2026 Title and Company name: Manager / Mirya (Shenzhen) Technology co.,Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the `

Mirya (Shenzhen) Technology co.,Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Mirya (Shenzhen) Technology co.,Ltd. Address: Factory Building No.5119, Zone 2, Fuqiao Industrial Zone, Heping Community, Fuhai Subdistrict, Bao’an District, Shenzhen, China Product Name: Smart Scalp Serum Applicator FCC ID: 2BS2I-MATE06 Model(s): Azure Cloud Mate06 2.911(d)(5)(ii) Applicant filing We, [Mirya (Shenzhen) Technology co.,Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Date:May 25, 2026 Title and Company name: General Manager / Mirya (Shenzhen) Technology co.,Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Mirya (Shenzhen) Technology co.,Ltd. Letter of Authorization Company: Mirya (Shenzhen) Technology co.,Ltd. Address: Factory Building No.5119, Zone 2, Fuqiao Industrial Zone, Heping Community, Fuhai Subdistrict, Bao’an District, Shenzhen, China Product Name: Smart Scalp Serum Applicator Model Number(s): Azure Cloud Mate06 Product Description: Smart Scalp Serum Applicator FCC ID: 2BS2I-MATE06 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: May 25, 2026 Name: Yuanwang XU Title: General Manager Company: Mirya (Shenzhen) Technology co.,Ltd.

Mirya (Shenzhen) Technology co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 25, 2026 Subject; Request for Confidentiality FCC ID: 2BS2I-MATE06 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yuanwang XU Title: General Manager

Page 1 of 4 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix II external photos FCC ID: 2BS2I-MATE06 Page 2 of 4 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 3 of 4 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 4 of 4 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China ------End------

Label and Location Material: Silk-screen Font color: White Size: L: 3cm*W: 1cm Label and Location W FCC ID: 2BS2I-MATE06 Model No.: Azure Cloud Mate06 L

Page 1 of 7 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix III internal photos FCC ID: 2BS2I-MATE06 Page 2 of 7 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 3 of 7 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 4 of 7 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 5 of 7 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 6 of 7 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China BT ANT Page 7 of 7 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China ------End------

Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China RF Exposure evaluation FCC ID: 2BS2I-MATE06 According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison According to FCC Part 2.1093, this device is classified as a Portable Device. A portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. BLE: Worse case output power is as below: [2480MHz: 1.30dBm] Maximum output power is 1.30dBm (1.35mW). (1.35mW /5mm)·[√2.480(GHz)]= 0.42 <3.0 for 1-g SAR. Then SAR evaluation is not required.

Inverted F Antenna Specification Summary ITEMANT SPEC Model Name 2.4G ANT MAX. Gain 2.65dBi PolarizationHorizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50 Ohm Antenna Length 9 .4mm Manufacture Antenna Photo & Length (mm) Shenzhen Kimairay Technology Co.,Ltd.

Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Page 1 of 45 Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China FCC TEST REPORT FCC ID: 2BS2I-MATE06 On Behalf of Mirya (Shenzhen) Technology co.,Ltd. Smart Scalp Serum Applicator Model No.: Azure Cloud Mate06 Prepared for : Mirya (Shenzhen) Technology co.,Ltd. Address : Factory Building No.5119, Zone 2, Fuqiao Industrial Zone, Heping Community, Fuhai Subdistrict, Bao’an District, Shenzhen, China Prepared By : Shenzhen PSI Testing Co., Ltd. Address : 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Report Number : psi2605022-C01-R10 Date of Receipt : May 9, 2026 Date of Test : May 9, 2026- May 20, 2026 Date of Report : May 20, 2026 Version Number : V0 Page 2 of 45 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China TABLE OF CONTENTS Description Page 1. Summary Of Standards And Results ---------------------------------------------------------- 6 1.1. Description of Standards and Results ---------------------------------------------------- 6 2. General Information --------------------------------------------------------------------------------- 7 2.1. Description of Device (EUT) ---------------------------------------------------------------- 7 2.2. Accessories of Device (EUT) --------------------------------------------------------------- 8 2.3. Tested Supporting System Details--------------------------------------------------------- 8 2.4. Block Diagram of Connection Between EUT and Simulators ---------------------- 8 2.5. Test Mode Description ------------------------------------------------------------------------ 9 2.6. Software test version and power setting information --------------------------------- 9 2.7. Test Conditions ------------------------------------------------------------------------------- 10 2.8. Test Facility ------------------------------------------------------------------------------------ 10 2.9. Measurement Uncertainty ----------------------------------------------------------------- 10 2.10. Test Equipment List-------------------------------------------------------------------------- 11 3. Spurious Emission --------------------------------------------------------------------------------- 12 3.1. Test Limits -------------------------------------------------------------------------------------- 12 3.2. Block Diagram of Test setup -------------------------------------------------------------- 13 3.3. Test Procedure -------------------------------------------------------------------------------- 14 3.4. Test Results------------------------------------------------------------------------------------ 15 4. Power Line Conducted Emission ------------------------------------------------------------- 21 4.1. Test Limits -------------------------------------------------------------------------------------- 21 4.2. Test Procedure -------------------------------------------------------------------------------- 21 4.3. Test Setup -------------------------------------------------------------------------------------- 21 4.4. Test Results------------------------------------------------------------------------------------ 22 5. Out-of-band Emissions --------------------------------------------------------------------------- 25 5.1. Test Limits -------------------------------------------------------------------------------------- 25 5.2. Test Procedure -------------------------------------------------------------------------------- 25 5.3. Test Setup -------------------------------------------------------------------------------------- 25 5.4. Test Results------------------------------------------------------------------------------------ 25 6. Conducted Maximum Output Power --------------------------------------------------------- 31 6.1. Test limits --------------------------------------------------------------------------------------- 31 6.2. Test Procedure -------------------------------------------------------------------------------- 31 6.3. Test Setup -------------------------------------------------------------------------------------- 31 6.4. Test Results------------------------------------------------------------------------------------ 31 7. Peak Power Spectral Density ------------------------------------------------------------------ 34 7.1. Test limits --------------------------------------------------------------------------------------- 34 7.2. Test Procedure -------------------------------------------------------------------------------- 34 7.3. Test Setup -------------------------------------------------------------------------------------- 34 7.4. Test Results------------------------------------------------------------------------------------ 34 8. Bandwidth --------------------------------------------------------------------------------------------- 37 8.1. Test limits --------------------------------------------------------------------------------------- 37 8.2. Test Procedure -------------------------------------------------------------------------------- 37 8.3. Test Setup -------------------------------------------------------------------------------------- 37 8.4. Test Results------------------------------------------------------------------------------------ 37 Page 3 of 45 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China 9. Band Edge Test -----…

Text truncated - open the document above for the full version.

Page 1 of 2 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix I Test Setup Photo FCC ID: : 2BS2I-MATE06 Spurious Radiation Emissions Test (<1G) Spurious Radiation Emissions Test (＞1G) Page 2 of 2 Report No.: psi2605022-C01-R10 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Conducted emission Test RF ------End------