2BS5M-S-PBMF5KMagPower Pro

Thanks
for
choosing
us
! Magnetic Wireless
Charger 3 in 1 Product
Manual ABOUT
WIRELESS
CHARGER 1 SPECIFICATION Output
(USB-C)

:
5V2.4A 9V/2.2A 12V/1.5A Wireless
output1

:
5W
7.5W
10W 15W(MAX) Note: QC3.0
/ PD
Quick
Charge
wall
adapter (≥18W)
required
for
Fast
Charge
Mode, Otherwise it will cause unstable charging. This product is a powerful 3 in 1 magnetic wireless charger with 5000mAh power bank , which can provide wireless charging for iPhone12 / 13 /14 . This wireless charger features 3 Qi-compatible charging mats, having the ability of charging phone , Airpods and Apple Watch simultaneously,. It's Aluminum alloy and foldable design. Its appearance resembles a cool shell. The 5000mAh Battery can meet outside charging needs. It can be folded for Easy storage and travel carrying. Wireless
output2

:
5W
(For Airpods) Wireless
output3

:
3W
(For Watch) Input
(USB-C)





:
5V2.4A 9V/2.2A
Capacity





:
5000mAh Watch
charging area USB-C in Phone
charging area Aripods
charging area LED
indicator Apple
watch
&

phone
&
Airpods
wireless
charging
simultaneously 4 PLEASE
NOTE 5 1.


Generally,
the
full
charge
of
the
mobile
phone
is
3-4
hours.
Please
remove
the mobile phone immediately after the mobile phone is full to avoid overheating. Please do not charge the phone continuously for days. 5.

Do
not
place
metal
objects,
magnetic
cards,
and
metal
phone
cases
on
the charging pad, as this may cause damage or the charger may not work. Compatible with most kinds of phone cover cases, including rubber cases, hybrid cases, plastic/TPU/PC cases etc. 2.

Please
try
to
align
the
phone
with
the
surface
dots
to
improve
the
charging efficiency. If the charge is unstable or not charging, adjust the phone position 3.

If
the
phone
case
is
too
thick,
please
remove
the
case
to
increase
the charging efficiency 4.

It's
normal
for
your
device
to
get
slightly
warm
during
the
inductive
charging.
It has an overheating protection function on built-in. 6.

Do
not
place
the
charger
closely
to
the
magnetic
stripes
or
chip
cards(ID
cards, bank cards) to avoid magnet failure. 7.

Make
sure
that
the
pad
doesn't
get
too
hot.
If
it
does,
take
your
phone
away from the pad, and switch the charger off;when the plate has cooled down try charging again. Note: The mobile phone needs to be aligned with the charging center area, otherwise it will cause intermittent or poor charging. 3 IN 1 Charging Mode 2 IN 1 Charging Mode Singular charging Mode 7 6 GUIDE
ON
HOW
TO
WIRELESS CHARGE
Apple
watch

Airpods
wireless
charging
simultaneously Only Magafe
wireless
charging for mobile Phone
GUIDE
ON
HOW
TO
INPUT/OUTPUT When
the

lights

flashes fast,
it
shows
Metal
FOD
(Foreign
Object
Debris)
on
the surface or it is not working properly. Please remove the device and FOD immediately, then restart the product for reuse. 2 USB-C IN 1. INPUT: Power bank You can use USB-C Port to charge for the Power bank. 4 Power lights are used to display the capacity of the battery. 2. OUTPUT: USB-C OUT The USB-C port supports QC / PD fast charge output. Connect the USB-C port to the mobile phone, the mobile phone can be quickly charged. Button The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Scapade Ltd Covered Equipment Certification Attestation Letter 11/11/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BS5M-S-PBMF5K Scapade Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Scapade Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Scapade Ltd (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Lemon feng Title: Manager Company Name: Scapade Ltd Date: 11/11/2025

Scapade Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: November 11, 2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BS5M-S-PBMF5K Scapade Ltd(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Scapade Ltd FRN: 0037548328 Address: Neofytou Nikolaidi & Theod. Kolokotroni, Onisiforou Center, 2nd floor, Theodoros, 8011, Paphos, Cyprus Signature: Contact Person: Lemon feng Tel: 18211307641 Email: [email protected]

DATE: November 11, 2025 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BS5M-S-PBMF5K Product Name: MagPower Pro Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Lemon feng Title: Manager Company: Scapade Ltd

Date: November 11, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Lemon feng Title: Manager Company: Scapade Ltd

DATE: November 11, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen CCUT Quality Technology Co., Ltd. (1F, Building 35, Changxing Technology Indstrl Park Changzhen Community, Yutang Street,Shenzhen,China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Scapade Ltd (Neofytou Nikolaidi & Theod. Kolokotroni, Onisiforou Center, 2nd floor, Theodoros, 8011, Paphos, Cyprus). <Signature> Name: Lemon feng Title: Manager Applicant Company: Scapade Ltd

Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report Annex A. EUT External Photos Model: S-PBMF5K EUT View 1 EUT View 2 Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report EUT View 7

Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report Annex B. EUT Internal Photos Model: S-PBMF5K EUT Internal View 1 EUT Internal View 2 Earphone Coil Antenna Watch Coil Antenna Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report EUT Internal View 3 EUT Internal View 4 Phone Coil Antenna Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report EUT Internal View 5 EUT Internal View 6

Report No: SSP25090140-2E MPE Test Report Page 1 of 16 MPE Test Report FCC ID: 2BS5M-S-PBMF5K Report No. : SSP25090140-2E Applicant : Scapade Ltd Product Name : MagPower Pro Model Name : S-PBMF5K Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2025-10-21 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090140-2E MPE Test Report Page 2 of 16 Test Report Basic Information Applicant..................................: Scapade Ltd Address of Applicant...............: Neofytou Nikolaidi & Theod. Kolokotroni, Onisiforou Center, 2nd floor, Theodoros, 8011, Paphos, Cyprus Manufacturer..........................: Scapade Ltd Address of Manufacturer........: Neofytou Nikolaidi & Theod. Kolokotroni, Onisiforou Center, 2nd floor, Theodoros, 8011, Paphos, Cyprus Product Name.........................: MagPower Pro Brand Name.............................: Scapade Main Model..............................: S-PBMF5K Series Models..........................: - Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2025-09-17 to 2025-9-28 Test Result...............................: PASS Tested By ................................: (Coke Huang) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090140-2E MPE Test Report Page 3 of 16 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................7 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Setup Block Diagram ......................................................................................................................................9 2.4 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 18 Report No: SSP25090140-2E MPE Test Report Page 4 of 16 Revision History Revision Issue Date Description Revised By V1.0 2025-10-21 Initial Release Lahm Peng Report No: SSP25090140-2E MPE Test Report Page 5 of 16 1. General Information 1.1 Product Information Product Name: MagPower Pro Trade Name: Scapade Test Model: S-PBMF5K Series Models: - Rated Voltage: USB-C Input: 9V⎓2.2A, 5V⎓2.4A USB-C Output: 12V⎓1.5A, 9V⎓2.2A, 5V⎓2.4A Watch Wireless Output: 3W Earbuds Wireless Output: 5W Wireless Output: 5W, 7.5W, 10W, 15W DC 3.85V by battery, USB 5V Charging Power Adapter: - Battery: DC 3.85V, 5000mAh Test Sample No: SSP25090140-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: Wireless charging Output (Phone/Earphone):110.5kHz-205kHz Wireless charging Output (Watch):310kHz-340kHz Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Modular Device Report No: SSP25090140-2E MPE Test Report Page 6 of 16 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 5W (Phone)+adapter charging - TM2 Wireless charging 15W (Phone) - TM3 Wireless charging 10W (Phone) - TM4 Wireless charging 7.5W (Phone) - TM5 Wireless charging 5W (Phone) - TM6 Wireless charging 5W (Earphone)+adapter charging - TM7 Wireless charging 5W (Earphone) - TM8 Wireless charging 3W (Watch)+adapter charging - TM9 Wireless charging 3W (Watch) - TM10 Wireless charging 5W (Phone) + Wireless charging 5W (Earphone) + Wireless charging 3W (Watch) +adapter charging - TM11 Wireless charging 5W (Phone) + Wireless charging 5W (Earphone) + Wireless charging 3W (Watch) - Note1: All modes including full load, halfload and no-load have been tested, The report reflects data for the worst full load TM2 and …

Text truncated - open the document above for the full version.

莞市石碣聚源电子制品厂 Dongguan Shijie Juyuan Electronic products factory 产品规格承认书 SPECIFICATON APPROVAL 客户名称： CUSTOMER 客户品名： Product Name ofCustomer A11G47 Single-layer L-shaped Launch Module 我方产品名（材质）： Product Mame ofOurs(Matenial) A11G47 Single-layer L-shaped Launch Module 承 认： APPROVED 核准： 制表： 日期： APPROVED DRAWN Yang Min DATE 2018-3-20 Address: 4th Floor, Building A, Central Industrial Zone, Shijie Village Committee, Dongguan City Telephone：0769-82297538 Fax：0769-82297548 Page number 1 of 4 Specification 规格内容 CISTOMEP/N: 客户品名 A11G47 Single-layer L-shaped Launch Module PARTNUMBER： 制造商料号 1.DIMENSIONS(外形尺寸）：mm A 20.5±0.5 B 39±0.5 C 43±0.5 D 3 MAX E 185±2 F 0.8±0.1 G 1.5 MAX APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日 期 PACE 页 码 杨 敏 2018-3-20 2 of 4 Specifcation 规 格 内 容 CUSTOMERP/N: 客户名称 A11G47 Single-layer L-shaped Launch Module PARTNUMBER： 制造商料号 5.WINDING DETAILS(绕线详细说明）： 6.ELECTRICAL CHARACTERISTICS(电气特性）： PARAMETERS UNIN LIMTI Inductance ls@100KHz/1v uh 6.3±10% Q @100KHz/1v 75Min DCR @100KHz/1v mΩ 55Max Wdy.NO. 绕 组 Start 开始 Finish 结束 Turns 圈数 Wire Dia 线径 Wdg.TyepeSprad/lose 绕线方法疏/密绕 Wdg.Direction 绕线方向 Turns/Layer 层数/每层圈数 S F 10TS 0.08×24 ×2 Single-layer tightly wound Counter-c lockwise 1st floor /10TS APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日期 PAGE 页码 Yang Min 2018-3-20 3 of 4 MATERIAL LIST 材 料 清 单 CUSTOMER P/N: 客 户 品 名 A11G47 Single-layer L-shaped Launch Module PARTNUMBER： 制造商料号 NO. Material name 材料名称 Description 品名描述 Manufacturer 制造商 Material 材质 1 Silk-covered wire 0.08×24×2 2 Lead-free tin rod High temperature 3 magnetic sheet 40*1.0 Ferrite. Manganese zinc. PC40 4 Glue Resin glue 5 High-temperature adhesive tape 8mm 6 Pearly foam 270*380*55 7 Carton box 280*390*190 8 9 10 APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制作 DATE 日期 PAGE 页码 Yang Min 2018-3-20 4 of 4

莞市石碣聚源电子制品厂 Dongguan Shijie Juyuan Electronic products factory 产品规格承认书 SPECIFICATON APPROVAL 客户名称： CUSTOMER 客户品名： Product Name ofCustomer A11G47 Single-layer L-shaped Launch Module 我方产品名（材质）： Product Mame ofOurs(Matenial) A11G47 Single-layer L-shaped Launch Module 承 认： APPROVED 核准： 制表： 日期： APPROVED DRAWN Yang Min DATE 2018-3-20 Address: 4th Floor, Building A, Central Industrial Zone, Shijie Village Committee, Dongguan City Telephone：0769-82297538 Fax：0769-82297548 Page number 1 of 4 Specification 规格内容 CISTOMEP/N: 客户品名 A11G47 Single-layer L-shaped Launch Module PARTNUMBER： 制造商料号 1.DIMENSIONS(外形尺寸）：mm A 20.5±0.5 B 39±0.5 C 43±0.5 D 3 MAX E 185±2 F 0.8±0.1 G 1.5 MAX APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日 期 PACE 页 码 杨 敏 2018-3-20 2 of 4 Specifcation 规 格 内 容 CUSTOMERP/N: 客户名称 A11G47 Single-layer L-shaped Launch Module PARTNUMBER： 制造商料号 5.WINDING DETAILS(绕线详细说明）： 6.ELECTRICAL CHARACTERISTICS(电气特性）： PARAMETERS UNIN LIMTI Inductance ls@100KHz/1v uh 6.3±10% Q @100KHz/1v 75Min DCR @100KHz/1v mΩ 55Max Wdy.NO. 绕 组 Start 开始 Finish 结束 Turns 圈数 Wire Dia 线径 Wdg.TyepeSprad/lose 绕线方法疏/密绕 Wdg.Direction 绕线方向 Turns/Layer 层数/每层圈数 S F 10TS 0.08×24 ×2 Single-layer tightly wound Counter-c lockwise 1st floor /10TS APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日期 PAGE 页码 Yang Min 2018-3-20 3 of 4 MATERIAL LIST 材 料 清 单 CUSTOMER P/N: 客 户 品 名 A11G47 Single-layer L-shaped Launch Module PARTNUMBER： 制造商料号 NO. Material name 材料名称 Description 品名描述 Manufacturer 制造商 Material 材质 1 Silk-covered wire 0.08×24×2 2 Lead-free tin rod High temperature 3 magnetic sheet 40*1.0 Ferrite. Manganese zinc. PC40 4 Glue Resin glue 5 High-temperature adhesive tape 8mm 6 Pearly foam 270*380*55 7 Carton box 280*390*190 8 9 10 APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制作 DATE 日期 PAGE 页码 Yang Min 2018-3-20 4 of 4

Shenzhen Chenxing Electronic Technology Co., Ltd. Company Name: Shenzhen Chenxing Electronic Technology Co., Ltd. Factory Address: 5th Floor, Building 1, Xinkecheng Science and Technology Industrial Park, No. 51, Daba Road, Xin'an Street, Bao'an District, Shenzhen City Page 1 产 品 规 格 书 PRODUCTSPECIFICATIONFORAPPROVAL 客 户 名 称： CUSTOMER Yu Yangcheng 产 品 名 称： PRODUCTNAME Apple Watch transmitting coil 物 料 编 码： PARTNo. 1206C 产 品 规 格： PRODUCTSPEC Measurement specification：6.8uH±10% Disk specification：Soft magnetic sheetR06-2 Wire specification：2 UEW 0.08*24*13Ts（14mm） Outlining length：43mm± 2mm Magnet specifications：8*3mm Nickel plating 3800 ± 100GS 3M+20*8.5*0.4mmEVA 日期： DATE July 8th, 2024 版 本 型 号： VERSION REV1.0 版本 Revision 变更内容 ModifiedContent 责任 人 Principle 日期 Date 备注 Note RE V 1.0 First releaseXue Lei 2024-07-08 制定/PREPAREDBY审核/CHECKEDBY核准/APPROVEDBY 客户认可签名及盖章 Authorizedsignature& companychop Page 2 产 品 规 格 SPECIFICATION 一、Disk size 二、Schematic diagram 三、Winding parameters 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction SF Enamel-coated wire 0.08*24P 13TsCCW Shenzhen Chenxing Electronic Technology Co., Ltd. Company Name: Shenzhen Chenxing Electronic Technology Co., Ltd. Factory Address: 5th Floor, Building 1, Xinkecheng Science and Technology Industrial Park, No. 51, Daba Road, Xin'an Street, Bao'an District, Shenzhen City Page 3 四、Electrical characteristics： 温度TEMPERATURE:25±10°C,湿度RELATIVE HUMIDITY:65±20% 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS IND.S-F 6.8uH ± 10% 100KHz/1.0VLCZ METER 1062B 五、 Shenzhen Chenxing Electronic Technology Co., Ltd. Product image Company Name: Shenzhen Chenxing Electronic Technology Co., Ltd. Factory Address: 5th Floor, Building 1, Xinkecheng Science and Technology Industrial Park, No. 51, Daba Road, Xin'an Street, Bao'an District, Shenzhen City

Report No: SSP25090140-1E FCC Test Report Page 1 of 29 FCC TEST REPORT FCC ID: 2BS5M-S-PBMF5K Report No. : SSP25090140-1E Applicant : Scapade Ltd Product Name : MagPower Pro Model Name : S-PBMF5K Test Standard : FCC Part 15 Subpart C Date of Issue : 2025-10-21 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090140-1E FCC Test Report Page 2 of 29 Test Report Basic Information Applicant..................................: Scapade Ltd Address of Applicant...............: Neofytou Nikolaidi & Theod. Kolokotroni, Onisiforou Center, 2nd floor, Theodoros, 8011, Paphos, Cyprus Manufacturer..........................: Scapade Ltd Address of Manufacturer........: Neofytou Nikolaidi & Theod. Kolokotroni, Onisiforou Center, 2nd floor, Theodoros, 8011, Paphos, Cyprus Product Name.........................: MagPower Pro Brand Name.............................: Scapade Main Model..............................: S-PBMF5K Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020/Cor 1-2023 Date of Test .............................: 2025-09-17 to 2025-9-28 Test Result...............................: PASS Tested By ................................: (Coke Huang) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090140-1E FCC Test Report Page 3 of 29 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 26 6.1 Standard and Limit.............................................................................................................................................. 26 6.2 Test Procedure.................................................................................................................................................... 26 6.3 Test Data and Results .......................................................................................................................................... 26 Report No: SSP25090140-1E FCC Test Report Page 4 of 29 Revision History Revisio…

Text truncated - open the document above for the full version.

Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report Radiated Emission Test View 3 Report No: SSP25090140-1E FCC ID: 2BS5M-S-PBMF5K Annex of Test Report