2BS5R-0906-CLDcar dashboard

Honor LSV, LLC Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [December 2, 2025] U.S. Agent Designation [Honor LSV, LLC] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BS5R-0906-CLD Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Honor LSV, LLC]. [Honor LSV, LLC] with the FRN [0037652997] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Brian Plaisance] [Huiying Fan] [CEO] [Director] [Honor LSV, LLC] [GLOCERTS TECHNOLOGY INC]

Honor LSV, LLC (November 29, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BS5R-0906-CLD [Honor LSV, LLC] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Brian Plaisance Honor LSV, LLC (November 29, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BS5R-0906-CLD [Honor LSV, LLC] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Brian Plaisance

Honor LSV, LLC Model Difference Data：November 29, 2025 Product description: car dashboard Model name: 0906-CLD, 0901-CLD, 0902-CLD, 0903-CLD, 0904-CLD, 0905- CLD, 0907-CLD, 0908-CLD, 0909-CLD, 0910-CLD, 0912-CLD, 0913-CLD, 0914-CLD, 0915-CLD, 0916-CLD, 0917-CLD, 0918-CLD, 0919-CLD, 092- CLD Trade Name: N/A FCC ID: 2BS5R-0906-CLD All the model are the same circuit and RF module, only the name is different. Regards Sincerely Client’s signature : Client’s name / title : Brian Plaisance（CEO） Contact information / address：636 Omni Industrial Blvd Summerville, SC 29483

Honor LSV, LLC (November 29, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (car dashboard / 0906-CLD, 0901-CLD, 0902-CLD, 0903-CLD, 0904-CLD, 0905-CLD, 0907-CLD, 0908-CLD, 0909-CLD, 0910-CLD, 0912-CLD, 0913-CLD, 0914-CLD, 0915-CLD, 0916-CLD, 0917-CLD, 0918-CLD, 0919-CLD, 092-CLD / FCC ID: 2BS5R-0906-CLD) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Brian Plaisance Title: CEO

Honor LSV, LLC (November 29, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Brian Plaisance Title: CEO

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 Model: 0906-CLD External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4

FCC ID LABEL: Label Location: FCC ID: 2BS5R-0906-CLD Model No.: 0906-CLD

Operational Description 2.4wifi: 0906-CLD car dashboard uses RTL8821CS chip and WiFi 2.4G. The whole wifi protocol architecture can be divided into three parts: the bottom hardware module, the middle protocol layer and the high-end application layer. The external circuit consists of antenna RF matching circuit, 40MHz oscillation circuit, power filter circuit and output circuit, KEY function key PIO circuit and LED indicator lamp Operation Frequency: 2412-2462 MHz Modulation Type: DSSS, OFDM Number Of Channel 11CH/7 CH Antenna Designation: FPC Antenna Antenna Gain 2.1dBi Ratings: DC 12V 30W Operation Frequency: 5150-5250 MHz Modulation Type: OFDM Number Of Channel 4CH Antenna Designation: FPC Antenna Antenna Gain 1.6dBi Ratings: DC 12V 30W Bluetooth: 0906-CLD car dashboard uses QCC3040 chip and Bluetooth 5.0. The whole wifi protocol architecture can be divided into three parts: the bottom hardware module, the middle protocol layer and the high-end application layer. The external circuit consists of antenna RF matching circuit, 32MHz oscillation circuit, power filter circuit and output circuit, KEY function key PIO circuit and LED indicator lamp Operation Frequency: 2402-2480MHz Modulation Type: GFSK Number Of Channel 40CH Antenna Designation: FPC Antenna Antenna Gain 2.25dBi Ratings: DC 12V 30W Operation Frequency: 2402-2480MHz Modulation Type: GFSK, π/4 DQPSK, 8DPSK Number Of Channel 79CH Antenna Designation: FPC Antenna Antenna Gain 1.0dBi Ratings: DC 12V 30W

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2BS5R-0906-CLD Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm Test Result of RF Exposure Evaluation BT+WIFI supported simultaneous transmission: BT+2.4GWIFI: ∑MPE Ratio =0.0008/1+0.0102/1=0.011≤1, BT+5GWIFI: ∑MPE Ratio =0.0008/1+0.0072/1=0.008≤1, So passed. Modes& Channel Freq. (MHz) Tune up Produce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result 2.4G WIFI 802.11b&2 462 14±1 15 31.6228 1.6218 (2.1dBi) 0.0102 1 Pass EDR 8DPSK& MCH 3±1 4 2.5119 1.6788 (2.25dBi) 0.0008 1 Pass BLE GFSK& MCH 2±1 3 1.9953 1.2589 (2.25dBi) 0.0007 1 Pass 5.2GWIFI 802.11a &5240 13±1 14 25.1189 1.4454 (1.6dBi) 0.0072 1 Pass

MyAntennaRFTechnologyCo.,Ltd ADD:No.RM405,R3-ABuilding,ShenzhenHigh-TechPark,Nanshan,Shenzhen,P.R.China. TEL：+86-0755-86503881FAX：+86-0755-27801677E-mail：[email protected] WIFI7-1Antenna FEATURES [email protected] [email protected] WeldingRG1.13cable,Ipexconnector,3Mstickerforeasyinstallation. Forsmartdevicewireless,Zigbee,Bluetoothterminal PRODUCTS PartNo.WeightDimensions(LxWxH)CablesDimensionsConnectorColor FPC:37.4*17.5*0.2mAIWF015m Φ1.13*145mm IPEX1Black SPECIFICATIONS PARAMETER SPECIFICATION FrequencyBands,MHz2400-25005100-5900 VSWR(Max)3.0:13.0:1 PeakGain,dBi(Typ)[email protected]/[email protected] NominalImpedance50Ω MaxPower(ambienttempof25°C)10Watts AzimuthBeamWidth(deg)60° PolarizationLinear ColorBlack StorageTemperatureRange(°C)-40°Cto+85°C OperationalTemperatureRange(°C)-40°Cto+85°C MaterialSubstanceComplianceREACH/RoHSCompliant HSCODE8517707090 USHSCODE8517620010 UPC MyAntennaRFTechnologyCo.,Ltd ADD:No.RM405,R3-ABuilding,ShenzhenHigh-TechPark,Nanshan,Shenzhen,P.R.China. TEL：+86-0755-86503881FAX：+86-0755-27801677E-mail：[email protected] ELECTRICALDATA ReturnLoss Efficiency（%） MyAntennaRFTechnologyCo.,Ltd ADD:No.RM405,R3-ABuilding,ShenzhenHigh-TechPark,Nanshan,Shenzhen,P.R.China. TEL：+86-0755-86503881FAX：+86-0755-27801677E-mail：[email protected] PeakGain（dBi） MyAntennaRFTechnologyCo.,Ltd ADD:No.RM405,R3-ABuilding,ShenzhenHigh-TechPark,Nanshan,Shenzhen,P.R.China. TEL：+86-0755-86503881FAX：+86-0755-27801677E-mail：[email protected] RADIATIONPATTERNS 2DRadiationPatternat2450MHz 2DRadiationPatternat5500MHz MyAntenna RF Technology Co., Ltd ADD: No.RM 405, R3-A Building, Shenzhen High-Tech Park, Nanshan, Shenzhen, P.R. China. TEL：+86-0755-86503881 FAX：+86-0755-27801677 E-mail：[email protected] Antenna Gain MyAntennaRFTechnologyCo.,Ltd ADD:No.RM405,R3-ABuilding,ShenzhenHigh-TechPark,Nanshan,Shenzhen,P.R.China. TEL：+86-0755-86503881FAX：+86-0755-27801677E-mail：[email protected] HOUSINGCONFIGURATIONS IPEX 1 37.40±0.3 17.50±0.2 145.0±3.0 Φ1.13±0.1 WIFI 7 V1.0

Report Tel: 4008-707-283Web: http://www.ctb-lab.net Page 1 of 53 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: car dashboard FCC ID: 2BS5R-0906-CLD Trademark(s): N/A Model/Type reference: 0906-CLD, 0901-CLD, 0902-CLD, 0903-CLD, 0904-CLD, 0905-CLD, 0907-CLD, 0908-CLD, 0909-CLD, 0910-CLD, 0912-CLD, 0913-CLD, 0914-CLD, 0915-CLD, 0916-CLD, 0917-CLD, 0918-CLD, 0919-CLD, 092-CLD Applicant’s name: Honor LSV, LLC Address: 636 Omni Industrial Blvd Summerville, SC 29483 Manufacturer: Honor LSV, LLC Address: 636 Omni Industrial Blvd Summerville, SC 29483 Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Oct. 24, 2025 Sample tested Date: Oct. 24, 2025 to Nov. 17, 2025 Issue Date: Nov. 17, 2025 Report No.: CTB25102410001RF02 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25102410001RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 53 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................................ 4 2. TEST SUMMARY .......................................................................................................................................... 5 3. MEASUREMENT UNCERTAINTY............................................................................................................. 6 4. PRODUCT INFORMATION AND TEST SETUP ..................................................................................... 7 4.1 Product Information .................................................................................................................................................... 7 4.2 Test Setup Configuration .......................................................................................................................................... 7 4.3 Support Equipment ..................................................................................................................................................... 7 4.4 Channel List .................................................................................................................................................................. 8 4.5 Test Mode ...................................................................................................................................................................... 8 4.6 Test Environment ........................................................................................................................................................ 8 5. TEST FACILITY AND TEST INSTRUMENT USED ................................................................................ 9 5.1 Test Facility ................................................................................................................................................................... 9 5.2 Test Instrument Used ................................................................................................................................................. 9 6. AC POWER LINE CONDUCTED EMISSION .......................................................................................... 11 6.1 Block Diagram Of Test Setup ................................................................................................................................ 11 6.2 Limit ............................................................................................................................................................................... 11 6.3 Test procedure ........................................................................................................................................................... 11 6.4 Test Result .................................................................................................................................................................. 13 7. RADIATED SPURIOUS EMISSION ........................................................................................................ 14 7.1 Block Diagram Of Test Setup ................................................................................................................................ 14 7.2 Limit ............................................................................................................................................................................... 14 7.3 Test procedure ........................................................................................................................................................... 15 7.4 Test Result .................................................................................................................................................................. 16 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS..................................................... 25 8.1 Block Diagram Of Test Setup ................................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 1 Model: 0906-CLD Radiated Emission Below 1G Above 1G