2BS5T-M26-AMotorcycle phone mount

FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

DongguanZhuoShiIntelligentTechCo.,Ltd Address:No.7,LianxinRoad,Chang'anTown,DongguanCity,GuangdongProvince,China Date:2025-11-24 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2BS5T-M26-A FRN:0037653003 (“DongguanZhuoShiIntelligentTechCo.,Ltd”)certifiesthat,asofthedateofthefilingofthe application,GOLDENVICTORYINTERNATIONALTRADINGCOLTDisourdesignatedU.S. agentforserviceofprocessfortheabovereferencedFCCID.(“DongguanZhuoShiIntelligent TechCo.,Ltd”)acceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-related proceedinginvolvingtheequipment. GOLDENVICTORYINTERNATIONALTRADINGCOLTDaccepts,asofthedateofthefiling oftheapplication,theobligationofthedesignatedU.S.agentforserviceofprocessforthe abovereferencedFCCID. DesignatedU.S.AgentInformation: Name:GOLDENVICTORYINTERNATIONALTRADINGCOLTD Address:11016THSTREETSUITE1400DENVER,CO80202UnitedStates FRN：0036377570 ContactPerson:LeonHowar Tel.:(337)255-0461 Email:[email protected] Sincerely, Signedonbehalfof（DongguanZhuoShi IntelligentTechCo.,Ltd） SignedonbehalfofGOLDENVICTORY INTERNATIONALTRADINGCOLTD Name:WenQuZhouName:LeonHowar Title:ManagerTitle:Manager Date:2025-11-24Date:2025-11-24

Rev1/26/2023 (DongguanZhuoShiIntelligentTechCo.,Ltd) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025-11-24 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BS5T-M26-A [DongguanZhuoShiIntelligentTechCo.,Ltd]certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. [DongguanZhuoShiIntelligentTechCo.,Ltd]certifiesthattheequipmentforwhichauthorizationis soughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc. oranyofitssuccessorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyof itssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB 986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) (Applicantprintedname):WenQuZhou Rev1/26/2023 (DongguanZhuoShiIntelligentTechCo.,Ltd) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025-11-24 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BS5T-M26-A [DongguanZhuoShiIntelligentTechCo.,Ltd]certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiaries oraffiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname):WenQuZhou

DongguanZhuoShiIntelligentTechCo.,Ltd Date：2025-11-24 ProductModelNumber:M26-A,M26-A1,M26-A2,M26-A3,M23 FCCID:2BS5T-M26-A Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:0769-82177796 Onbehalfof:DongguanZhuoShiIntelligentTechCo.,Ltd

DongguanZhuoShiIntelligentTechCo.,Ltd OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:November24,2025 Subject;RequestforConfidentiality FCCID:2BS5T-M26-A ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:WenQuZhou Title:Manager

DongguanZhuoShiIntelligentTechCo.,Ltd ModelDifference Date:Nov.24,2025 Productdescription:Motorcyclephonemount Modelname:M26-A,M26-A1,M26-A2,M26-A3,M23 FCCID:2BS5T-M26-A M26-Aistestedmodel,othermodelsarederivativemodels.Themodelsareidenticalincircuit, onlydifferentonthemodelnames.SothetestdataofM26-Acanrepresenttheremaining models. Client’ssignature: Client’sname/title:WenQuZhou/Manager Contactinformation/address:No.7,LianxinRoad,Chang'anTown,DongguanCity, GuangdongProvince,China

东莞市德欣达电子科技有限公司 DongguanDesindaElectronicTechnologyCo.,Ltd. 客户/Ciient 名称/TYPE 产品型 MP-A2transmitting coil 号 ModelNO 产品编 G50 Magnetic strip with holes and double grooves, adhesive line length on the back10MM 10UH 号 Partnunberingsystey 客户料号 Cientp/NO 工程编号 EnginrerNOXIE202406001 日期/Date2024-6-11 本公司工程部/ForEnginerDepartnerOnly 修改内容/RrvisedCintent认可日期/APProvedDate 编制/Prepared审核/Checked认可/Approved RAOXUYA Liang Xie N 客户认可回签 /AuthorixedSignaturureCompanyChop 工程/Enginrer认可/QCAPProved认可日期/APProved Address: Room 202, No. 191 Tai'an Road, Wei Town, Zhangmutou Town, Dongguan City, Guangdong Province 东莞市德欣达电子科技有限公司 DongguanDesindaElectronicTechnologyCo.,Ltd. 一、线圈工艺/WindingProcese: NO windingwire gauge number of turns Winding direction Remarks 1N12UEW-B-0.08*105P12TSCCW 2 二．电气性能/FEATURES: 1.测试条件（Testconditions）：25°C,65%RH@100KHz/1V 1.1电感量（Inductance） 1.2 1.3 1. 1.11L0A(Coil+Magnetic Disc)=10uH±10% 4 L:创达1068+1310;DCR:502BC;SIZE:Calliper Qva l u e =85MIN 直流电阻（DCR）：85mΩ MAX 工作温度(Operating Temperature)：-25°C~85°C s N 2.测试仪器(Test instrument)： 3.Bill of Materials O project material 1WIRE￠0.08*105p2UEW-1.15mm 2FERRITE 50*5.3*1.0 Ferrite hard magnet 3GLUE white glue 4SOLDERXCD-907B 5Adhesive adhesive backing 6 High temperature adhesive 3MM H i g h - t e m p e r a t u r e t a p e 7 8 Address: Room 202, No. 191 Tai'an Road, Wei Town, Zhangmutou Town, Dongguan City, Guangdong Province 东莞市德欣达电子科技有限公司 DongguanDesindaElectronicTechnologyCo.,Ltd. 三．参考图/CIRCUITDIAGRAM 四．外形图 /OUTSIDEDIAGR unit：MM A Note: Wrap 3MM (ref) high-temperature adhesive tape around the coil outlet position standard ABCDEFHGJI STD 19.5±119.5±144.5±143.5±149.5±110±1.510±16 2-5 5.3±0.52.8Max Address: Room 202, No. 191 Tai'an Road, Wei Town, Zhangmutou Town, Dongguan City, Guangdong Unit：MM Province 东莞市德欣达电子科技有限公司 DongguanDesindaElectronicTechnologyCo.,Ltd. 五．包装 /PACKAGE 5.3 包装以现有包装盘为参照标准，以实际出货包装为准，如有特需要求可以定制。 Thepackagingshallbebasedontheexustingpackingplateandtheactualdeliverypackage shallprevail.Ifthereisanyrequirement,wecancustomizeit. Address: Room 202, No. 191 Tai'an Road, Wei Town, Zhangmutou Town, Dongguan City, Guangdong Province

FCCID:2BS5T-M26-A EUTPHOTOSExternalPhotos FCCID:2BS5T-M26-A FCCID:2BS5T-M26-A FCCID:2BS5T-M26-A FCCID:2BS5T-M26-A FCCID:2BS5T-M26-A FCCID:2BS5T-M26-A FCCID:2BS5T-M26-A ※※※※※ENDOFREPORT※※※※※

Size:20mm*18mm FCCID:2BS5T-M26-A

FCCID:2BS5T-M26-A EUTPHOTOSInternalPhotos FCCID:2BS5T-M26-A ANT FCCID:2BS5T-M26-A FCCID:2BS5T-M26-A FCCID:2BS5T-M26-A ※※※※※ENDOFREPORT※※※※※

Page 1 of 10 FCCID:2BS5T-M26-A ProductName: Motorcyclephonemount ProductModelNo.:M26-A M26-A1,M26-A2,M26-A3,M23 ModelDifference:M26-Aistestedmodel,othermodelsarederivativemodels.Themodelsare identicalincircuit,onlydifferentonthemodelnames.Sothetestdataof M26-Acanrepresenttheremainingmodels. Transmittingmode:KeeptheEUTincontinuouslywirelesschargingmode OperationFrequency:110.1-205kHz Powersupply:INPUT:DC12-24V OUTPUT: Wirelesscharging:15W(Max) USB-C:36W(Max) Page 2 of 10 TestModes: Mode1 ACAdapter+Phonechargingport(BatteryStatus:≤1%) Mode2ACAdapter+Phonechargingport(BatteryStatus:50%) Mode3ACAdapter+Phonechargingport(BatteryStatus:≥98%) Mode4Standby Note:Allmodesweretested,onlytheworst-casewasrecordedinthereport.Mode1istheworstmode. Item EquipmentMfr/BrandModel/TypeNo.SeriesNo.Note E-1DCPOWERSUPPLY SophpowerElectronicsCo., Ltd. DSP100-100/AE E-2Mobilephone XiaomiCommunications Co.,Ltd. Xiaomi13/AE Page 3 of 10 1MeasuringStandard KDB680106D01WirelessPowerTransferv04 2Requirements Requirementsofsection3ofKDB680106D01Yes/NoDescription MobileDeviceandPortableDeviceConfigurationsYesMobileDevice EquipmentAuthorizationProceduresforDevicesOperatingat FrequenciesBelow4MHz Yes Thedeviceoperateinthe frequencyrange110.1-205kHz. RFExposurecompliancemaybeensuredonlyforaminimum conditionsatsmallerdistancescanstillbeconsidered unlikely.separationdistancethatisgreaterthan20cm,whileuse Yes TheaggregateH-fieldandE-field strengthsanywhereatorbeyond 20cmsurroundingthedevice, and20cmawayfromthetop surface. Page 4 of 10 3Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Page 5 of 10 4TestSetup 5TestProcedure 1)TheRFexposuretestwasperformedinanechoicchamber. 2)Themeasurementprobewasplacedattestdistance(20cmfromallsidesand20cmfromthetop)whichis betweentheedgeofthechargerandthegeometriccenterofprobe. 3)Thehighestemissionlevelwasrecordedandcomparedwithlimitassoonasmeasurementofeachpoints (A,B,C,D,E)werecompleted. 4)TheEUTwasmeasuredaccordingtothedictatesofKDB680106D01v04. Remark：TheEUT’stestpositionA,B,C,DandEisvalidfortheEandHfieldmeasurements. Page 6 of 10 6TestInstrumentslist TestEquipmentManufacturerModelSerialNo.LastCal.NextCal. Near-fieldElectric and ElectricFieldSensor System Schmid&Partner EngineeringAG MAGPy-8H3D+E3D V2 3127 September 09,2025 September 08,2026 Near-fieldElectric and ElectricFieldSensor System Schmid&Partner EngineeringAG MAGPy-DASV23121 September 09,2025 September 08,2026 7MEASUREMENTUNCERTAINTY Thereporteduncertaintyofmeasurementy±U,whereexpendeduncertaintyUisbasedonastandard uncertaintymultipliedbyacoveragefactorofk=2,providingalevelofconfidenceofapproximately95%. No.ItemUncertainty 1H-field±0.7dB 2E-field±1.06dB DecisionRule Uncertaintyisnotincluded Uncertaintyisincluded Page 7 of 10 8TestResult Wehaveevaluatedmode1tomode4andtheworstmode1isshowedinthisreport. Charging coil Frequency Range (MHz) Test Position A (A/m) Test Position B (A/m) Test Position C (A/m) Test Position D (A/m) Test Position E (A/m) Test Position F (A/m) 50% Limits (A/m) Limits (A/m) test result Phone110.1-2050.0860.0870.0650.0930.0950.1800.8151.63PASS Charging coil Frequency Range (MHz) Test Position A (V/m) Test Position B (V/m) Test Position C (V/m) Test Position D (V/m) Test Position E (V/m) Test Position F (V) 50% Limits (V/m) Limits (V/m) test result Phone110.1-2050.6600.3900.3000.3500.4802.870307614PASS Page 8 of 10 9TestSet-upPhoto Page 9 of 10 Page 10 of 10

ProjectNo.:ZHT-250903118W02 Page 1 of 20 FCCTESTREPORT FCCID:2BS5T-M26-A ReportNo..........................:ZHT-250903118W02 Product..............................:Motorcyclephonemount Trademark.........................:/ Model(s)............................:M26-A M26-A1,M26-A2,M26-A3,M23 Modeldifference...............:M26-Aistestedmodel,othermodelsarederivativemodels.Themodelsare identicalincircuit,onlydifferentonthemodelnames.Sothetestdataof M26-Acanrepresenttheremainingmodels. Applicant...........................:DongguanZhuoShiIntelligentTechCo.,Ltd Address.............................:No.7,LianxinRoad,Chang'anTown,DongguanCity,GuangdongProvince, China Manufacturer.....................:DongguanZhuoShiIntelligentTechCo.,Ltd Address.............................:No.7,LianxinRoad,Chang'anTown,DongguanCity,GuangdongProvince, China Preparedby.......................:GuangdongZhonghanTestingTechnologyCo.,Ltd. Address.............................:Room104/201,Building1,YibaolaiIndustrialPark,Qiaotou,Fuhai Subdistrict,Bao'anDistrict,Shenzhen,Guangdong,China DateofReceipt.................:Sept.3,2025 DateofTest(s)...................:Sept.3,2025toSept.19,2025 DateofIssue.....................:Sept.22,2025 TestStandard(s)................:FCCCFRTitle47Part15SubpartC Testprocedure.....................................: : ANSIC63.10-2013 Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. Preparedby:Reviewedby:Approvedby: KimiLu/EngineerBaretWu/DirectorLeviLee/Manager Note:Theresultsshowninthistestreportreferonlytothesample(s)testedunlessotherwisestated.Thistest reportshallnotbereproducedexceptinfull,withoutpriorwrittenapprovalofZHT.Thisdocumentmaybe alteredorrevisedbyZHT,personnelonly,andshallbenotedintherevisionofthedocument. ProjectNo.:ZHT-250903118W02 Page 2 of 20 TABLEOFCONTENTS 1.VERSION...................................................................................................................3 2.TESTSUMMARY.......................................................................................................4 3.GENERALINFORMATION........................................................................................5 3.1GENERALDESCRIPTIONOFEUT......................................................................5 3.2Testmode..............................................................................................................6 3.3BlockDiagramofEUTConfiguration.....................................................................7 3.4TestConditions......................................................................................................7 4.TESTFACILITYANDTESTINSTRUMENTUSED...................................................8 4.1TestFacility............................................................................................................8 4.2InstrumentListForAllTestItems..........................................................................8 4.3Testingsoftware.....................................................................................................9 4.4MeasurementUncertainty......................................................................................9 5.CONDUCTEDEMISSIONTEST..............................................................................10 5.1CONDUCTEDEMISSIONMEASUREMENT.......................................................10 5.1.1POWERLINECONDUCTEDEMISSIONLimits...............................................10 5.1.2TESTPROCEDURE.........................................................................................10 5.1.3DEVIATIONFROMTESTSTANDARD............................................................10 5.1.4TESTSETUP....................................................................................................11 5.1.5EUTOPERATINGCONDITIONS.....................................................................11 5.1.6TestResult........................................................................................................11 6.RADIATEDEMISSIONMEASUREMENT...............................................................12 6.1RadiatedEmissionLimits.....................................................................................12 6.2AnechoicChamberTestSetupDiagram..............................................................13 6.3TestProcedure....................................................................................................13 6.4DEVIATIONFROMTESTSTANDARD...............................................................13 6.5TestResult...........................................................................................................14 7.BANDWIDTHTEST.................................................................................................17 8.ANTENNAREQUIREMENT.....................................................................................19 9.TESTSETUPPHOTO..............................................................................................20 10.EUTCONSTRUCTIONALDETAILS.....................................................................20 ProjectNo.:ZHT-250903118W02 Page 3 of 20 1.VERSION ReportNo.IssueDateDescriptionApproved ZHT-250903118W02Sept.22,2025OriginalValid ProjectNo.:ZHT-250903118W02 Page 4 of 20 2.TESTSUMMARY TestItemSectioninCFR47Result Antennarequirement15.203Pass ACPowerLineConductedEmission15.207Pass SpuriousEmission15.209(a)(f)Pass 20dBBandwidth15.215Pass NOTE: (1)”N/A”denotestestisnotapplicableinthisTestReport ProjectNo.:ZHT-250903118W02 Page 5 of 20 3.GENERALINFORMATION 3.1GENERALDESCRIPTIONOFEUT ProductName: MotorcyclePhoneMount TestModelNo: M26-A Hardwareversion: V1.0 Softwareversion: V1.0 OperationFrequency: 110.1-205kHz Modulationtype:ASK AntennaType:InductiveloopcoilAntenna Antennagain:0dBi Powersupply: INPUT:DC12-24V OUTPUT: Wirelesscharging:15W(Max) USB-C:36W(Max) SampleNumber:250903118YP001 Remark:Theantennagainisprovidedbythecustomer,ifthedataprovidedbythecustomerisnotaccurate, GuangdongZhonghanTestingTechnologyCo.,Ltd.do…

Text truncated - open the document above for the full version.

FCCID:2BS5T-M26-A EUTTESTPHOTOS ※※※※※ENDOFREPORT※※※※※