2BS6C-NEOTAGNeotag

1 NeoTag Instruction Manual This is the new standard Table of Contents I. P roduct Features:3 II. T erms of use:3 III. N eoTag (this product) :4 1. Power On/Off4 2. Adding NeoTag5 3. Attaching to the power cable5 4. Find your NeoTag :5 5. Location notification settings6 6. When your whereabouts become unknown6 7. Resetting the device6 IV . R eg arding unknown accessory detection :6 V. About the Find My network :6 VI. Battery:6 VII. Regulations ( FCC/Technical Compliance):6 VIII. Check for Find My compatible accessories:7 IX . s tatement:7 X. Installation environment :7 XI. Warranty period and contact details :7 XII. Disposal method :7 XIII. Disclaimer7 XIV. Trademarks8 2 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 3 This is a Works with Apple Find My compatible accessory. Apple is not responsible for the operation or use of this product or its compliance with safety and regulatory standards. I. Product Features: This product is an accessory designed to assist in the location management and confirmation of cables and materials used in solar power generation facilities, etc. It works in conjunction with Apple devices such as iPhones, and updates location information when detected by nearby Apple devices (this depends on the communication environment, power status, and the presence of nearby Apple devices, etc.). Dustproof and waterproof: Equivalent to IP67. The battery is non-replaceable and lasts for approximately one year. Dummy cases are also available for distributed installation (multiple installations are recommended). To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS. Product specifications : Item Content Product name NEOTAG Purpose Checking the location of materials and cables, detecting entrances and exits, BLE tag system Communication method Bluetooth Low Energy (BLE) 2.4GHz Radio wave range Open space approximately 30 to 80m (depending on environment) Alarm Beep Power supply Button battery ( SR44 x 2) / Non-replaceable battery Operating time Approximately 1 year (depending on beacon interval and alarm frequency) Battery replacement Not replaceable ( totally waterproof ) Operating temperature range -20 to +60°C Dustproof/waterproof IP67 equivalent Dimensions and weight 17.4×81.7×8.6mm/approx. 15g Compatible apps Apple Find My app Patents Patent No. 7721204 II. Terms of use: ● iPhone with iOS 14.5 or later, iPad with iPadOS 14.5 or later, or iPod touch with two- factor authentication enabled 4 ● Find My app enabled, Bluetooth/Location Services on ● Wi-Fi or mobile connectivity available ● Go to "Settings > Privacy and Security > Location Services" and set "Find My Phone" to "While Using the App" and turn on precise location services. III. NeoTag (this product) : 1. Power On/Off ON: Press the button once → beep once OFF: Press and hold the button for 5 seconds or more → beep twice Status check: Press twice quickly → 1 beep Reset: Press 4 times quickly + hold the 5th time for 5 seconds or more → Reset sound * The buttons are slightly stiff to prevent accidental operation. Please press firmly. List of buttons and other operations on this product Situation The purpose Button operation Reaction Remarks Pairing status Turn on Press the button one or more times Beeping sounds The power turns on after a sound is heard Turn it off Press and hold for more than 5 seconds Two short beeps The sound will play and then the power will turn off Check the status Press twice quickly One short beep Indicates power-on state Reset Press four times quickly, then press the fifth time for at least five seconds Factory beep sounds Factory reset * Operate "Delete belongings" using the app Shows factory default settings Factory default Turn on Press the button one or more times Turn it off Press and hold for more than 5 seconds Two short beeps The sound will play and then the power will turn off Check the status Press twice quickly One short beep Indicates power-on state * Owner information will not be overwritten even if you operate it while it is locked (see [7. Resetting the 5 device]). 2. Adding NeoTag Go to the Find My app > Find my belongings > Add an item > Other supported items > select NeoTag and set it up. 3. Attaching to the power cable ● Figures 1 to 5 and secure …

Text truncated - open the document above for the full version.

Page 1 of 3 FCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 3 FCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 3 FCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6

Page 1 of 1 FCCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L 1.0cm x W 0.5cm) Label Location Neotag Model: Neotag FCC ID: 2BS6C-NEOTAG

Page 1 of 5 FCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 5 FCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 5 FCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 5 FCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Bluetooth Antenna Page 5 of 5 FCC ID: 2BS6C-NEOTAG Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9

Page 1 of 8 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation For MirateX, Inc. Neotag Test Model: Neotag Prepared for : MirateX, Inc. Address : 3-5-2, Gifu City, Gifu Prefecture 500-8234, Japan Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : November 17, 2025 Number of tested samples : 2 Sample No. : A251117008-1, A251117008-2 Serial number : Prototype Date of Test : November 17, 2025 ~ November 21, 2025 Date of Report : November 24, 2025 Page 2 of 8 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation Report Reference No. ................. : LCSA11175061EB Date of Issue .................................. : November 24, 2025 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ........... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name.......................... : MirateX, Inc. Address ........................................... : 3-5-2, Gifu City, Gifu Prefecture 500-8234, Japan Test Specification Standard ......................................... : FCC KDB publication 447498 D01 General RF Exposure Guidance v06 FCC CFR 47 part1 1.1310 FCC CFR 47 part2 2.1093 Test Report Form No. ................... : TRF-4-E-215 A/0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Neotag Trade Mark ..................................... : N/A Test Model ...................................... : Neotag Ratings ............................................ : Please Refer to Page 6 Result ........................................... : Pass Compiled by: Supervised by: Approved by: Vera Deng/ Administrators Kevin Huang/ RF Manager Gavin Liang/ Manager Page 3 of 8 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation EUT......................................... : Neotag Test Model........................... : Neotag Applicant............................... : MirateX, Inc. Address.................................. : 3-5-2, Gifu City, Gifu Prefecture 500-8234, Japan Telephone............................... : / Fax.......................................... : / Manufacturer....................... : NTEX TECHNOLOGY COMPANY LIMITED Address................................... : Floor 6, Viet A Building, No.9 Duy Tan street, Cau Giay Ward, Hanoi, Vietnam Telephone............................... : / Fax.......................................... : / Factory....................... : NTEX TECHNOLOGY COMPANY LIMITED Address................................... : Floor 6, Viet A Building, No.9 Duy Tan street, Cau Giay Ward, Hanoi, Vietnam Telephone............................... : / Fax.......................................... : / Test Result Pass The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA11175061EB November 24, 2025 Date of issue Page 4 of 8 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 November 24, 2025 Initial Issue --- Page 5 of 8 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TABLE OF CONTENTS Description Page 1. PRODUCT INFORMATION ........................................................................................................................ 6 2. EVALUATION METHOD AND L…

Text truncated - open the document above for the full version.

PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: WIFI6E TRI BAND 2.4/5GHZ LTCC CORNER MOUNTING CHIP ANTENNA PRODUCT SPECIFICATION SHEET No. B EC No: 696753 1 of 26 DATE: 2022-02-21 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2067740001 Cooper Zhou Horace Ma Anson Yin TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC TITLE WIFI6E TRI BAND 2.4/5GHZ LTCC CORNER MOUNTING CHIP ANTENNA TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS 4.0 GENERAL SPECIFICATION 5.0 ANTENNA SPECIFICATION 6.0 MECHANICAL REQUIREMENTS 7.0 ENVIRONMENTAL SPECIFICATION 8.0 RECOMMENDED REFLOW CONDITION 9.0 RECOMMENDED FOOTPRINT ON PCB FOR SOLDERING 10.0 PACKING 11.0 CHANGE HISTORY PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: WIFI6E TRI BAND 2.4/5GHZ LTCC CORNER MOUNTING CHIP ANTENNA PRODUCT SPECIFICATION SHEET No. B EC No: 696753 2 of 26 DATE: 2022-02-21 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2067740001 Cooper Zhou Horace Ma Anson Yin TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC WIFI6E TRI BAND 2.4/5/6GHZ LTCC CORNER MOUNTING CHIP ANTENNA 1.0 SCOPE This product specification covers the mechanical, electrical and environmental performances specification for WiFi6E Tri Band 2.4/5/6GHz LTCC corner mounting chip antenna 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: WiFi6E Tri Band 2.4/5/6GHz LTCC corner mounting chip antenna Series Number: 2067740001 2.2 DESCRIPTION 206774 is a WiFi6E Tri Band 2.4/5/6GHz LTCC SMT monopole antenna. It has high RF performance if it is mounted on the corner of a PCB. With different matching configurations, it supports 2.4GHz single band, 2.4/5GHz dual band or 2.4/5/6GHz tri band. Due to multi- layer LTCC process, it has a stronger ceramic body and a better adhesion to the PCB after reflow. 2.3 FEATURES Configurable working frequencies: 2.4GHz single band, 2.4/5GHz dual band or 2.4/5/6GHz dual band High efficiency - > 55% Compact form factor with less PCB space: 3.2x1.6x0.65mm with a PCB keep-out area of 5.9x5.85mm Linear polarization ANTENNA 3D VIEW Manufacturer: Molex LLC Address:2222 Wellington Ct Lisle, IL 60532, USA PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: WIFI6E TRI BAND 2.4/5GHZ LTCC CORNER MOUNTING CHIP ANTENNA PRODUCT SPECIFICATION SHEET No. B EC No: 696753 3 of 26 DATE: 2022-02-21 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2067740001 Cooper Zhou Horace Ma Anson Yin TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 2.4 PRODUCT STRUCTURE INFORMATION 3.0 APPLICABLE DOCUMENTS DOCUMENT NUMBER DESCRIPTION Sale Drawing (SD) SD-2067740001 Mechanical Dimension of the product Application Specification (AS) AS-2067740001 Antenna Application and surrounding Packing Drawing (PK) PK-2067740001 Product packaging specifications APPLICATION SPECIFICATION 3.0 APPLICABLE DOCUMENTS DOCUMENT NUMBER DESCRIPTION Sale Drawing (SD) SD-2119640001 Mechanical Dimension of the product Product Specification (PS) PS-2119640001 Product Specification Packing Drawing (PK) PK-2119640001 Product packaging specifications 4.0 ANTENNA PERFORMANCE 4.1 RF TEST CONDITIONS All measurements are done of the antenna mounted on a reference PCB (40*20*0.8mm) with VNA Agilent E5071C and Over-The-Air (OTA) chamber. FIGURE4.1.1 ANTENNA LOADED WITH REFERENCE PCB TESTED WITH VNA E5071C DUT APPLICATION SPECIFICATION FIGURE4.1.2 ANTENNA LOADED WITH REFERENCE PCB TESTED IN OTA CHAMBER 4.2 ANTENNA PERFORMANCE DESCRIPTION EQUIPMENT Requirements (For Configure 1) Requirements (For Configure 2) Frequency Range VNA E5071C 2.4-2.5GHz 2.4-2.5GHz 5.15-5.85GHz Return Loss VNA E5071C < -6 dB< -5 dB< -5 dB Peak Gain (Max) OTA Chamber 2.7dBi 2.1dBi 2.2dBi Average Total Efficiency OTA Chamber >80%>70%>65% Polarization OTA Chamber Linear Input Impedance VNA E5071C 50 ohms Note that the above antenna performance is measured with just the antenna mounted on a reference PCB to similar a free-space condition. When implement into the system, the frequency resonant might be off-tune due to the loading of surrounding components especially metal plane. This off-tune can be compensated through matching. Although module manufacturers specify a peak gain limit, it is based on free-space conditions. The peak gain will be degraded by 1 to 2dBi in the actual implementation as the radiation pattern will change due to the surround components. As such, during selection of antenna, you can select one with high peak gain to compensate for the loss. Molex can offer assistant to choose the best location and best tuning in-order to meet this peak gain requirement. DUT APPLICATION SPECIFICATION 4.3 RETURN LOSS PLOT All measurements in this document are done on a reference PCB. FIGURE 4.3.1 RETURN LOSS OF ANTENNA AT 2.4GHZ IN FREE SPACE FOR CONFIGURE 1 FIGURE 4.3.2 RETURN LOSS OF ANTENNA AT 2.4/5GHZ IN FREE SPACE FOR CONFIGURE 2 APPLICATION SPECIFICATION 4.4 EFFICIENCY PLOT All measurements in this document are done on a reference PCB. FIGURE 4.4.1 EFFICIENCY OF ANTENNA AT 2.4GHZ IN FREE SPACE FOR CONFIGURE 1 FIGURE 4.4.2 EFFICIENCY OF ANTENNA AT 2.4/5GHZ IN FREE SPACE FOR CONFIGURE 2 APPLICATION SPECIFICATION 4.5 2D RADIATION PATTERN All measurements in this document are done on a reference PCB. FIGURE 4.5.1 2D RADIATION PATTERN OF ANTENNA AT 2.4GHZ IN FREE SPACE FOR CONFIGURE 1 APPLICATION SPECIFICATION FIGURE 4.5.2 2D RADIATION PATTERN OF ANTENNA AT 2.4GHZ IN FREE SPACE FOR CONFIGURE 2 APPLICATION SPECIFICATION FIGURE 4.5.3 2D RADIATION PATTERN OF ANTENNA AT 5.5GHZ IN FREE SPACE FOR CONFIGURE 2 APPLICATION SPECIFICATION 4.6 3D RADIATION PATTERN All measurements in this document are done on a reference PCB. FIGURE 4.6.1 3D RADIATION PATTERN OF ANTENNA AT 2450GHZ IN FREE SPACE FOR CONFIGURE 1 APPLICATION SPECIFICATION FIGURE 4.6.2 3D RADIATION PATTERN OF ANTENNA AT 2450MHZ IN FREE SPACE FOR CONFIGURE 2 APPLICATION SPECIFICATION FIGURE 4.6.3 3D RADIATION PATTERN OF ANTENNA AT 5500MHZ IN FREE SPACE FOR CONFIGURE 2…

Text truncated - open the document above for the full version.

Page 1 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for BLE (Conducted Measurement) Product Name: Neotag Test Model: Neotag Environmental Conditions Temperature: 25.2C Relative Humidity: 56.0 % ATM Pressure: 100.0 kPa Test Engineer: Can Kun Supervised by: Paddi Chen Page 2 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1M 2402 Ant1 0.649 >=0.5 Pass NVNT BLE 1M 2440 Ant1 0.652 >=0.5 Pass NVNT BLE 1M 2480 Ant1 0.645 >=0.5 Pass Page 3 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs -6dB Bandwidth NVNT BLE 1M 2402MHz Ant1 -6dB Bandwidth NVNT BLE 1M 2440MHz Ant1 Page 4 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -6dB Bandwidth NVNT BLE 1M 2480MHz Ant1 Page 5 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.2 Maximum Peak Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT BLE 1M 2402 Ant1 0.66 30 Pass NVNT BLE 1M 2440 Ant1 3.08 30 Pass NVNT BLE 1M 2480 Ant1 2.07 30 Pass Page 6 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Power NVNT BLE 1M 2402MHz Ant1 Power NVNT BLE 1M 2440MHz Ant1 Page 7 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT BLE 1M 2480MHz Ant1 Page 8 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.3 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Conducted PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT BLE 1M 2402 Ant1 -16 8 Pass NVNT BLE 1M 2440 Ant1 -13.89 8 Pass NVNT BLE 1M 2480 Ant1 -14.64 8 Pass Page 9 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs PSD NVNT BLE 1M 2402MHz Ant1 PSD NVNT BLE 1M 2440MHz Ant1 Page 10 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity PSD NVNT BLE 1M 2480MHz Ant1 Page 11 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.4 Band Edge Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT BLE 1M 2402 Ant1 -56.04 -20 Pass NVNT BLE 1M 2480 Ant1 -56.73 -20 Pass Page 12 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Band Edge NVNT BLE 1M 2402MHz Ant1 Ref Band Edge NVNT BLE 1M 2402MHz Ant1 Emission Page 13 of 23 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-8…

Text truncated - open the document above for the full version.

Page 1 of 32 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For MirateX, Inc. Neotag Test Model: Neotag Prepared for : MirateX, Inc. Address : 3-5-2, Gifu City, Gifu Prefecture 500-8234, Japan Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : November 17, 2025 Number of tested samples : 2 Sample No. : A251117008-1, A251117008-2 Serial number : Prototype Date of Test : November 17, 2025 ~ November 21, 2025 Date of Report : November 24, 2025 Page 2 of 32 FCC ID: 2BS6C-NEOTAG Report No.: LCSA11175061EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15 C(15.247) Report Reference No. ................. : LCSA11175061EA Date of Issue .................................. : November 24, 2025 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : MirateX, Inc. Address .......................................... : 3-5-2, Gifu City, Gifu Prefecture 500-8234, Japan Test Specification Standard ......................................... : FCC CFR 47 PART 15 C(15.247) Test Report Form No.................... : TRF-4-E-145 A/0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for an…

Text truncated - open the document above for the full version.