2BS6F-3896124Press to vibrate the airplane cup

Shenzhen UTIMI Technology Co., LTD (Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China) Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: (2026/4/10) 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BS6F-3896124 Shenzhen UTIMI Technology Co., LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Kim Nengying Title: Manager Address: Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China

1 | P a g e Shenzhen UTIMI Technology Co., LTD (Floor 2/3/4, Building 2 District D Qiaosheng Industrial Park, Lilin Town, Huicheng District, Huizhou, China) Attestation Statements To: Federal Communications Commission Date: (2026/4/10) 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2BS6F-3896124] Product Name: [Press to vibrate the airplane cup] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Kim Nengying Title: Manager Address: Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Shenzhen UTIMI Technology Co., LTD (Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China) (2026/4/10) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BS6F-3896124 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely, (Signature) Printed Name: Kim Nengying Title: Manager Address: Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China

Shenzhen UTIMI Technology Co., LTD (Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China) (2026/4/10) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BS6F-3896124 I, the undersigned, hereby authorize (Shenzhen STS Test Services Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen STS Test Services Co., Ltd.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Shenzhen UTIMI Technology Co., LTD). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Full name of contact person listed on FCC’s website): Kim Nengying (Title): Manager

Shenzhen UTIMI Technology Co., LTD Model Difference 2026-04-10 EUT NAME: Press to vibrate the airplane cup FCC ID: 2BS6F-3896124 MODEL : 3896124, 3896125, 3896126, 3896127 All the model are the same circuit and RF module, except model names. Regards Sincerely Client’s signature: Client’s name / title : Kim Nengying / Manager Contact information / address: Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China

Page 1 of 7 FCC ID: 2BS6F-3896124 External Photos Page 2 of 7 FCC ID: 2BS6F-3896124 Page 3 of 7 FCC ID: 2BS6F-3896124 Page 4 of 7 FCC ID: 2BS6F-3896124

Size:50*20mm Press to vibrate the airplane cup FCC ID: 2BS6F-3896124 Label location

Page 5 of 7 FCC ID: 2BS6F-3896124 Internal Photos Page 6 of 7 FCC ID: 2BS6F-3896124 Antenna Page 7 of 7 FCC ID: 2BS6F-3896124

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.: STS2603316H01 Issued for Shenzhen UTIMI Technology Co., LTD Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China Product Name: Press to vibrate the airplane cup Brand Name: N/A Model Name: 3896124 Series Model(s): 3896125, 3896126, 3896127 FCC ID: 2BS6F-3896124 Test Standards: FCC 47CFR §2.1093 Page 2 of 7 Report No.: STS2603316H01 TEST REPORT Applicant’s Name ................. : Shenzhen UTIMI Technology Co., LTD Address ................................. : Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China Manufacturer's Name ........... : Shenzhen UTIMI Technology Co., LTD Address ................................. : Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China Product Description Product Name ........................ : Press to vibrate the airplane cup Brand Name .......................... : N/A Model Name .......................... : 3896124 Series Model(s) ...................... : 3896125, 3896126, 3896127 Test Standards ..................... : FCC 47CFR §2.1093 447498 D01 Interim General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 27 Feb. 2026 Date (s) of performance of tests ............. : 27 Feb. 2026~10 Mar. 2026 Date of Issue .......................................... : 11 Mar. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 7 Report No.: STS2603316H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 7 Page 4 of 7 Report No.: STS2603316H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 11 Mar. 2026 STS2603316H01 ALL Initial Issue Page 5 of 7 Report No.: STS2603316H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Press to vibrate the airplane cup Brand Name N/A Model Name 3896124 Series Model(s) 3896125, 3896126, 3896127 Model Difference All the model are the same circuit and RF module, except model names. Product Description The EUT is Press to vibrate the airplane cup Operation Frequency: 2402~2480 MHz Modulation Type: GFSK (1Mbps, 2Mbps) Antenna gain: 2.92dBi Antenna Designation: PCB Antenna Power Rating DC 3.7V from battery, DC 5V from USB Adapter N/A Battery DC 3.7V Hardware Version N/A Software Version N/A 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 7 Report No.: STS2603316H01 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in KDB 447498 D01 General RF Exposure Guidance v06 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Page 7 of 7 Report No.: STS2603316H01 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2.3 TEST RESULT Maximum measured transmitter power. Worst Case Mode frequency Maximum Output Power Tune up tolerance Max Tune up GHz dBm dBm dBm GFSK(BLE) 2.480 0.59 0±1 1 Evaluation Result Mode Frequency Antenna Distance RF output power including tune up (dBm) SAR Test Exclusion Threshold SAR Test Exclusion Estimated SAR GHz mm dBm mw GFSK(BLE) 2.48 5 1 1.259 0.393 Yes / Note: 1. Remark: The worst case gain of the antenna is 2.92dBi. 2. Threshold at which no SAR required is 0.393≤ 3.0 for 1-g SAR, Separation distance ≤ 5mm. ※※※※※END OF THE REPORT※※※※※

DongGuanSYLTechnologyCO.,LTD AntennaSpecification Manufacture：SYL ProductName：MMA-153-BTAntenna AntennaType：PCB TestDate：2026/3/30 Testedby ：CheckedBy:ApprovedBy: ChengMingWeiDuLinQianCongGen Dong Guan SYL Technology CO.,LTD 1、General Description Manufacturer：Dong Guan SYL Technology CO.,LTD Address： Room 203,DongHui Industrial Park,No.198 DaTang Road, DongGuan, GuangDong,China Product Name：MMA-153-BT Antenna Product model：MMA-153-BT Antenna Type ：PCB Antenna Test Frequency ：2400-2490MHz Peak Gain （ dBi ）2.92 Average Gain（dBi）>-3 VSWR ：<1.6 Impedance：50Ω Polarization：Linear DongGuanSYLTechnologyCO.,LTD 2、Antennasize: Dong Guan SYL Technology CO.,LTD 3、Gain and Efficiency Frequency （ MHz ） Gain （ dBi ） Effciency （ % ） AverageGain （ dBi ） Efficiency （ dB ） 24002.9272.20%-1.14-1.41 24101.9561.36%-2.05-2.12 24202.0061.00%-1.98-2.15 24300.8047.29%-3.09-3.25 24400.1240.82%-3.87-3.89 24500.9748.41%-3.08-3.15 24601.2853.80%-2.81-2.69 24701.2951.75%-2.98-2.86 24801.7958.79%-2.45-2.31 2490 1.4655.05%-2.61-2.65 DongGuanSYLTechnologyCO.,LTD 4、VSWR；ReturnLoss DongGuanSYLTechnologyCO.,LTD 5、2400MHz2D-ThetaPattern 6、2440MHz2D-ThetaPattern DongGuanSYLTechnologyCO.,LTD 7、2480MHz2D-ThetaPattern 8、2400MHz2D-PhiPattern DongGuanSYLTechnologyCO.,LTD 9、2440MHz2D-PhiPattern 10、2480MHz2D-PhiPattern DongGuanSYLTechnologyCO.,LTD 11、2400MHz3D-TotalPattern 12、2440MHz3D-TotalPattern 13、2480MHz3D-TotalPattern DongGuanSYLTechnologyCO.,LTD 14、TestSetupPhoto

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2603316W01 Issued for Shenzhen UTIMI Technology Co., LTD Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China Product Name: Press to vibrate the airplane cup Brand Name: N/A Model Name: 3896124 Series Model(s): 3896125, 3896126, 3896127 FCC ID: 2BS6F-3896124 Test Standards: FCC Part15.247 Page 2 of 69 Report No.: STS2603316W01 TEST REPORT Applicant’s Name ................. : Shenzhen UTIMI Technology Co., LTD Address ................................. : Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China Manufacturer's Name .......... : Shenzhen UTIMI Technology Co., LTD Address ................................. : Room 501, Zone B, Building A, Jingfa Intelligent Park, Xiawei Garden, Gushu Community, Xixiang Street, Bao ‘an District, Shenzhen, China Product Description Product Name ....................... : Press to vibrate the airplane cup Brand Name .......................... : N/A Model Name .......................... : ... : 3896124 Series Model(s) .................... : 3896125, 3896126, 3896127 Test Standards ..................... : FCC Part15.247 Test Procedure ...................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the IC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ..................... : 27 Feb. 2026 Date (s) of performance of tests ............. : 27 Feb. 2026~10 Mar. 2026 Date of Issue .......................................... : 11 Mar. 2026 Test Result.............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 69 Report No.: STS2603316W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 15 4. RADIATED EMISSION MEASUREMENT 17 4.1 RADIATED EMISSION LIMITS 17 4.2 TEST PROCEDURE 19 4.3 TEST SETUP 20 4.4 EUT OPERATING CONDITIONS 20 4.5 FIELD STRENGTH CALCULATION 21 4.6 TEST RESULTS 21 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 36 5.1 LIMIT 36 5.2 TEST PROCEDURE 36 5.3 TEST SETUP 36 5.4 EUT OPERATION CONDITIONS 36 5.5 TEST RESULTS 36 6. POWER SPECTRAL DENSITY TEST 37 6.1 LIMIT 37 6.2 TEST PROCEDURE 37 6.3 TEST SETUP 37 Page 4 of 69 Report No.: STS2603316W01 Table of Contents Page 6.4 EUT OPERATION CONDITIONS 37 6.5 TEST RESULTS 37 7. BANDWIDTH TEST 38 7.1 LIMIT 38 7.2 TEST PROCEDURE 38 7.3 TEST SETUP 38 7.4 EUT OPERATION CONDITIONS 38 7.5 TEST RESULTS 38 8. PEAK OUTPUT POWER TEST 39 8.1 LIMIT 39 8.2 TEST PROCEDURE 39 8.3 TEST SETUP 39 8.4 EUT OPERATION CONDITIONS 39 8.5 TEST RESULTS 39 9. ANTENNA REQUIREMENT 40 9.1 STANDARD REQUIREMENT 40 9.2 EUT ANTENNA 40 APPENDIX 1-TEST DATA 41 APPENDIX 2- EUT TEST PHOTO 69 Page 5 of 69 Report No.: STS2603316W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 11 Mar. 2026 STS2603316W01 ALL Initial Issue Page 6 of 69 Report No.: STS2603316W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 69 Report No.: STS2603316W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 69 Report No.: STS2603316W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Press to vibrate the airplane cup Brand Name N/A Model…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2BS6F-3896124 Conducted emissions 30MHz-1GHz Page 2 of 2 FCC ID: 2BS6F-3896124 Spurious emissions