2BS8A-JC-1JC kids walkie-talkie

FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. User should avoid un-intended operation of usage when it is collocated with other transmitters or antenna.

Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BS8A-JC-1 JC-1, JC-2, JC-3 We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. iv. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. US-American Point of Contact Applicant/Approval Holder Signature Date: 2025-11-27 Signature Date: 2025-11-27 Company Name: GLOCERTS TECHNOLOGY INC Quanzhou Jicheng Technology Co., Ltd FRN: 0036339737 0037664190 Contact Name: Huiying Fan Ai Wenlong Address: 19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507 Room 406, Office Building, No. 46 Changfeng Street Fengze District, Quanzhou City, Fujian Province, China Phone: (626) 588-8039 18650802454 Email: [email protected] [email protected]

Page 1 of 3 FCC ID: 2BS8A-JC-1 External Photos of EUT Page 2 of 3 FCC ID: 2BS8A-JC-1 Page 3 of 3 FCC ID: 2BS8A-JC-1

Label FCC ID:2BS8A-JC-1

Page 1 of 2 FCC ID:2BS8A-JC-1 Internal Photos of EUT Antenna Page 2 of 2 FCC ID:2BS8A-JC-1

Page 1 of 7 Report No.: AiTSZ-250922113FW2 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. RF Exposure evaluation Product Name : JC kids walkie-talkie Brand Name : N/A Model : JC-1 Series Model : JC-2, JC-3 FCC ID : 2BS8A-JC-1 Applicant : Quanzhou Jicheng Technology Co., Ltd Address : Room 406, Office Building, No. 46 Changfeng Street, Fengze District, Quanzhou City, Fujian Province Manufacturer : Quanzhou Jicheng Technology Co., Ltd Address : Room 406, Office Building, No. 46 Changfeng Street, Fengze District, Quanzhou City, Fujian Province Standard(s) : 47CFR §1.1310, 47CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt : Sep. 22, 2025 Date of Test : Sep. 24, 2025~ Oct. 10, 2025 Issued Date : Oct. 11, 2025 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 7 Report No.: AiTSZ-250922113FW2 Report Revise Record Report Version Issued Date Notes M0 Oct. 11, 2025 Initial Release Page 3 of 7 Report No.: AiTSZ-250922113FW2 Contents 1 GENERAL INFORMATION .......................................................................................................................................... 4 1.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 4 1.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 METHOD OF MEASUREMENT ................................................................................................................................... 6 2.1 APPLICABLE STANDARD.................................................................................................................................................. 6 2.2 EVALUATION METHOD AND LIMIT .................................................................................................................................... 6 2.3 MANUFACTURING TOLERANCE ........................................................................................................................................ 7 2.4 EVALUATION RESULT ..................................................................................................................................................... 7 2.5 CONCLUSION ............................................................................................................................................................... 7 Page 4 of 7 Report No.: AiTSZ-250922113FW2 1 GENERAL INFORMATION 1.1 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 1.2 General Description of EUT Name of EUT JC kids walkie-talkie Model Number JC-1 Series Model JC-2, JC-3 Power Supply DC 4.50V from battery Model difference: All models have the same structure and circuit except for the model names and appearance colors. Frequency Range 462.6375MHz Rate Power 10mW Modulation Type FM Channel Separation 12.5KHz Antenna Type Integral antenna Antennal Gain 2.0dBi Page 5 of 7 Report No.: AiTSZ-250922113FW2 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized, certified or accredited by the following organizations: FCC-Registration No.: 251906 Designation Number: CN1376 Guangdong Asia Hongke Test Technology Limited has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. IC —Registration No.: 31737 CAB identifier: CN0165 The 3m Semi-anechoic chamber of Guangdong Asia Hongke Test Technology Limited has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 31737 A2LA-Lab Cert. No.: 7133.01 Guangdong Asia Hongke Test Technology Limited has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. 1.4 Measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncert…

Text truncated - open the document above for the full version.

Page 1 of 27 Report No.: AiTSZ-250922113FW1 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : JC kids walkie-talkie Brand Name : N/A Model : JC-1 Series Model : JC-2, JC-3 FCC ID : 2BS8A-JC-1 Applicant : Quanzhou Jicheng Technology Co., Ltd Address : Room 406, Office Building, No. 46 Changfeng Street, Fengze District, Quanzhou City, Fujian Province Manufacturer : Quanzhou Jicheng Technology Co., Ltd Address : Room 406, Office Building, No. 46 Changfeng Street, Fengze District, Quanzhou City, Fujian Province Standard(s) : FCC CFR Title 47 Part 95B Date of Receipt : Sep. 22, 2025 Date of Test : Sep. 24, 2025~ Oct. 10, 2025 Issued Date : Oct. 11, 2025 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 27 Report No.: AiTSZ-250922113FW1 Report Revise Record Report Version Issued Date Notes M0 Oct. 11, 2025 Initial Release Page 3 of 27 Report No.: AiTSZ-250922113FW1 Contents 1 TEST SUMMARY ....................................................................................................................................................... 4 1.1 TEST STANDARDS ......................................................................................................................................................... 4 1.2 TEST SUMMARY ........................................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 GENERAL INFORMATION .......................................................................................................................................... 6 2.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 6 2.4 SPECIAL ACCESSORIES ................................................................................................................................................... 6 2.5 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 7 3 TEST CONDITIONS AND RESULTS .............................................................................................................................. 8 3.1 MAXIMUM TRANSMITTER POWER ................................................................................................................................... 8 3.2 OCCUPIED BANDWIDTH AND EMISSION MASK ................................................................................................................. 11 3.3 MODULATION CHARACTERISTIC ..................................................................................................................................... 14 3.4 FREQUENCY STABILITY ................................................................................................................................................. 17 3.5 TRANSMITTER RADIATED SPURIOUS EMISSION ................................................................................................................. 19 4 TEST SETUP PHOTOS OF THE EUT ........................................................................................................................... 22 5 PHOTOS OF THE EUT............................................................................................................................................... 23 Page 4 of 27 Report No.: AiTSZ-250922113FW1 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: FCC Rules Part 95: PERSONAL RADIO SERVICES. ANSI C63.10: 2020: American National Standard for Testing Unlicensed Wireless Devices ANSI C63.26:2015: American National Standard of procedures for compliance testing of transmitters used in licensed radio services. 1.2 Test Summary Description of Test Item Standard clause Verdict Maximum Transmitter Power FCC Part 95.567 PASS Modulation Characteristic FCC Part 2.1047 FCC Part 95.575 PASS Occupied Bandwidth and Emission Mask FCC Part 2.1049 FCC Part 95.573 FCC Part 95.579 PASS Radiated Spurious Emission FCC Part 95.579 PASS Frequency Stability FCC Part 2.1055 FCC Part 95.565 PASS Page 5 of 27 Report No.: AiTSZ-250922113FW1 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Lim…

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID: 2BS8A-JC-1