2BS96-E10PROelectric scooter

Instructions For E10 Pro Max 2 Fixed Button Accelerator Switch Button Folding Handle Charging Port Motor Front Tube Handlebar Brake Lever User ManualPower Adapter T-shape Allen KeyScooter Valve Extension Adapter Screw *8 (send *2) Package Contents Function English Speedometer: When the electric scooter is working, the speedometer displays the current travelling speed; when the electric scooter is faulty, the speedometer displays the fault error code; Fault display: Lights up to indicate that the scooter has a fault andneeds repair,after the repair is OK, the symbol goes out. Bluetooth display: Lights up to indicate Bluetooth connection to the scooter. Disconnecting Bluetooth means the symbol is off. Headlight display: Headlights on when illuminated, headlights off when switched off Battery level display: Five bars indicate battery level, with each bar representing approximately 20% of a full charge Speed unit display: Km/h in metric units on the left, mph in imperial units on the right. Mode Display: ECO low-speed gear (economy mode), D (medium-speed mode), S high-speed mode (sport mode) 3 Assembly 1. Pull the folding handle upwards until there is a click sound, andpull thefolding handle to confirm whether it is locked. 2.Manually connect the fixing seat and the wire in the front tube.and checkwhether it is turned on normally. The arrows on the tube need to be aligned before inserting. 3.Follow the number order as illustrated to pre-tighten the six screws with theincluded Allen key. Make sure the handlebar is correctly installed and thentighten the screws thoroughly. Typical range: Measured in standard mode at 9 mph with a full charge, 165 lbs load, ambient temperature 25°C, flat road surface and no wind. The actual range may vary due to the factors such as load, temperature, wind speed, road surface and the temperature, wind speed, road surface and operating habits. Parameters Product Dimensions Net Weight Rider Name Model Vehicle: L × W × H After Folding: L × W × H Vehicle Net Weight Max. Load Age (years) Height (in) Max Range (Miles) Assembled electric scooter Max. Climbing Angle (%) Suitable Surfaces Operating Temperature (°C) Storage Temperature (°C) IP Rating Charging Time (h) Battery Pack Nominal Voltage (VDC) Max. Charge Voltage (VDC) Rated Energy (Wh) Intelligent Battery Management System Normal Charging Temperature Range (°C) Rated Capacity (Ah)15.6 Battery electric scooter E10 Pro Max 45.67×22.4×48.74 in(116x57x124 cm) 45.67×22.4×23.43 in(116x57x59.5 cm) 48.0 lb (21.8 kg) 265.5 lb (120.45 kg) 14+ 4.72~7.87 20 (Walking : 6mph) Approx. 40 Approx. 18 Cement or asphalt road, with benches of less than 0.39in(1 cm) or crevices narrower than 1.18in(3 cm) -10 to 45 -20 to 50 IPX5 9.0 36.0 42.0 562 Over-heating, short circuit, over-current,over-discharge, and over-charge protection 0 to 40 Charger Output Power (W)84 Input Voltage (VAC)100-240 Max. Output Voltage (VDC)42.0 36; 2.0 Rated Output (VDC; A) TireFront & Back Tires Vacuum tyre,made of natural rubber synthetic rubber English 132 Max. Speed (mph) English 4 Attention : Charge Your Scooter 1. Keep pressing the switch button for 3s to turn on the scooter and check the battery level. lf the battery level is too low, please chargethe scooter. How to ride 1. When the charger is connected to the power supply, the charger's indicator light turns green. 2. Plug in the charging plug and the indicator light will change from green to red. 3. Indicator light changes from red to green when fully charged. 4. When charging, the scooter will automatically shut down Open the rubber flap Plug the power adapter into the charging port Fasten the rubber flap after charging 1. Only use the original power adapter when charging. 2. Keep away from children and animals when charging, and keep away fromflammable materials. 3. Do not charge or use the battery if it emits a peculiar smell, overheats or leaks. 4. Do not open the battery pack or insert anything into the charging port asthe battery contains dangerous substances. 5. When not in use for more than 30 days, fully charge, store in a cool, dry place, and fullycharge every 30 days. 2. After the scooter is turned on, it will be set to a default power mode. To switch between power modes, quickly press the button Once to toggle between pedestrian mode, D, and S. Pedestrian mode, D, and S represent different speed limits. Pedestrian mode has the lowest speed, and S has the highest. Press the switch button three times quickly to switch between metric and imperial units. 3. When pushing the scooter faster > 2.48MPH(4KM) , pressing the accelerator to activate the motor will accelerate the scooter. 4. During the sliding, keep your balance, place the other foot on the pedal and lightly press the acclerator to move forward. English 5 Folding Flip the fold switch up and turn on the fold wrench.Fold and lower the front tube, place the folding hook of the front tube into the hook holder. Unfolding Press the button in the folding hook to remove the folding hook from the hookfixing buckle, straighten the front tube, close thefolding handle until there is a “click"sound; flip the folding handleand make sure it is locked. 5. When steering or decelerating, release the throttle and brake with the push-down lever. 6. When the electric scooter is stationary, press and hold the button for 3 seconds to turn off the electric scooter. Light on/off function This electric scooter features an automatic light control function. When the scootertransitions from a bright environment to a dark one, the front and rear lightsautomatically turn on. Conversely, when the scooter moves from a darkenvironment to a bright one, the front and rear lights automatically turn off.However, these functions only activate when the photosensitive sensor is activated. The photosensitive sensor operates under two conditions: 1. Switch off and restart the electric scooter. 2. After locking and unlocking the scooter using the APP. For instance, if the sco…

Text truncated - open the document above for the full version.

Rev1/26/2023 ZhejiangjingshenlndustryCo.,ltd FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025-12-01 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BS96-E10PRO ZhejiangjingshenlndustryCo.,ltdcertifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903of theFCCrules. ZhejiangjingshenlndustryCo.,ltdcertifiesthattheequipmentforwhichauthorizationissoughtdoes notincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofits successorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) (KaiXu) Rev1/26/2023 ZhejiangjingshenlndustryCo.,ltd FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025-12-01 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BS96-E10PRO ZhejiangjingshenlndustryCo.,ltdcertifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesor affiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (KaiXu)

Zhejiang jingshen lndustry Co., ltd No.199 Xixi street, Linjiang lndustrial, ParkWucheng District, jinhua City, Zhejiang Province Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 11/28/2025 U.S. Agent Designation Zhejiang jingshen lndustry Co., ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:2BS96-E10PRO): Name and company of U.S. agent:LuxeLane E-trading, LLC Physical U.S. address of agent:6519 TAMARIND SKY LN FULSHEAR, TX 77441 United States FRN of U.S. agent:0036352755 Email address of U.S. agent:[email protected] Contact Name:YUAN SU Tel:7135685923 LuxeLane E-trading, LLC acknowledges their obligation to accept service of process on behalf of Zhejiang jingshen lndustry Co., ltd Zhejiang jingshen lndustry Co., ltd with the FRN 0037670767 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as kDB986446 D01. An expiration date for this letter does not exist. in case the U s. agent changes the arantee is oblicated to notifthe FCC within 30 days via the granting TCB. Sincerely, Signature Name:Kai Xu Title:Manager Company:Zhejiang jingshen lndustry Co., ltd Signature Name of U.S. agent: YUAN SU Title of U.S. agent: Manager Company of U.S. agent: LuxeLane E-trading, LLC 48_[model] US_Agent_2.911(d)(7) - U, V0 5

ZhejiangjingshenlndustryCo.,ltd OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:December1,2025 Subject;RequestforConfidentiality FCCID:2BS96-E10PRO ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:KaiXu Title:Manager

EffectiveDate:April2,2020QSF7.6.4-8–AgentAuthorizationLetterTemplatePage1of1 RevisionDate:Revision:0 ZhejiangjingshenlndustryCo.,ltd Date ： 2025-11-30 ProductModelNumber:E10ProMax,E8Pro,E8ProMax,E10Pro,C8,C8Pro,C8ProMax,C10,C10Pro.C10 ProMax.E8Pro-A.E8ProMax-A.E10Pro-AE10ProMaxA,C8-A,C8Pro-A,C8ProMax-A,C10-A,C10Pro-A,C10 ProMaxA.E8Pro-B.E8ProMax-B.E10Pro-B.E10ProMax-B.C8-B.C8ProB,C8ProMax-B,C10-B,C10Pro-B,C10 ProMax-B,E8Pro-C,E8ProMax-C.E10Pro-C.E10ProMax-C,C8-C,C8Pro-C,C8ProMaxC.C10-C.C10Pro-C.C10 ProMax-C.E8Pro-D.E8ProMax-D.E10Pro-D,E10ProMax-D,C8-D,C8Pro-D,C8ProMax-D,C10-D,C10Pro- D,C10ProMax-D FCCID:2BS96-E10PRO Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C.CanadaV5J5K5to actonourbehalfonallmattersconcerningtheabovenamedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformationrelatedtothe approvalprojecttotheappliedcertificationbodyandtothenotificationentitiesandtodiscuss anyissuesconcerningtheapprovalapplication.AnyandallactscarriedoutbyQAI LaboratoriesLtd.onourbehalfshallhavethesameeffectasactsofourown. By:KaiXu ContactListedonFCCWesbite Title:Manager Email:[email protected] Onbehalfof:ZhejiangjingshenlndustryCo.,ltd

ZhejiangjingshenlndustryCo.,ltd No.199XixiStreetLinjiangIndustrialPark.WuchengDistrict,JinhuaCity,ZhejiangProvince Productdifferencesstatement FCCIC:2BS96-E10PRO DATE:Nov.28,2025 We,ZhejiangjingshenlndustryCo.,ltd,electricscooterthesemodel:E10ProMax, E8Pro,E8 ProMax,E10Pro,C8,C8Pro,C8ProMax,C10,C10Pro,C10ProMax,E8Pro-A,E8Pro Max-A,E10Pro-A,E10ProMax-A,C8-A,C8Pro-A,C8ProMax-A,C10-A,C10Pro-A,C10 ProMax-A,E8Pro-B,E8ProMax-B,E10Pro-B,E10ProMax-B,C8-B,C8Pro-B,C8Pro Max-B,C10-B,C10Pro-B,C10ProMax-B,E8Pro-C,E8ProMax-C,E10Pro-C,E10Pro Max-C,C8-C,C8Pro-C,C8ProMax-C,C10-C,C10Pro-C,C10ProMax-C,E8Pro-D,E8Pro Max-D,E10Pro-D,E10ProMax-D,C8-D,C8Pro-D,C8ProMax-D,C10-D,C10Pro-D,C10 ProMax-D .Theproductsareidenticalininteriorstructure,electricalcircuitsandcomponents, justmodelnamesandcolorisdifferent. Company:ZhejiangjingshenlndustryCo.,ltd Address:No.199XixiStreetLinjiangIndustrialPark.WuchengDistrict,JinhuaCity, ZhejiangProvince Person:KaiXu/Manager Tel:15356913238 E-mail:[email protected]

FCC ID:2BS96-E10PRO Antenna spec 1.Antenna Description: Antenna typePCB Antenna ModelPCB-012 Frequency range2400MHz~2500MHz ManufacturerChipsea Technologies(Shenzhen)Corp AddressRoom 201, Building A, No.1 Qianwan 1st Road, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen 2. Antenna Photo: Unit:mm IC:34318-E10 PRO 3. AntennaEfficiencyandGain: Frequency(MHz)Efficiency(dBi)Gain(dBi)Efficiency(%) 2400-4.130.7661.41% 2410-4.020.0148.17% 2420-3.661.1458.88% 2430-4.060.8548.45% 2440-3.830.1159.24% 2450-3.971.2949.17% 2460-3.880.8135.56% 2470-3.950.4333.72% 2480-3.611.1060.58% 2490-4.010.9736.66% 2500-3.530.8341.87% IC:34318-E10 PRO 4. RadiationPattern

FCCID:2BS96-E10PRO ExternalPhotosoftheEUT Fig.1 Fig.2 FCCID:2BS96-E10PRO Fig.3 Fig.4 FCCID:2BS96-E10PRO Fig.5 Fig.6 FCCID:2BS96-E10PRO Fig.7

FCCID:2BS96-E10PRO labelandlocation Fig.1 FCCID:2BS96-E10PRO electricscooter Model:E10ProMax Input:DC42.0V/2.0A ZhejiangjingshenlndustryCo.,ltd 28mm 60mm FCCID:2BS96-E10PRO Fig.2 IC:34318-E10PRO electricscooter Model: E10Pro Input:DC42.0V/2.0A ZHEJIANGJINGSHENINDUSTRYCO.,LTD 28mm 60mm FCCID:2BS96-E10PRO Fig.3 IC:34318-E10PRO electricscooter Model: E8Pro Input:DC42.0V/2.0A ZHEJIANGJINGSHENINDUSTRYCO.,LTD 28mm 60mm FCCID:2BS96-E10PRO Fig.4 IC:34318-E10PRO electricscooter Model: E8ProMax Input:DC42.0V/2.0A ZHEJIANGJINGSHENINDUSTRYCO.,LTD 28mm 60mm FCCID:2BS96-E10PRO Fig.1 IC:34318-E10PRO electricscooter Model: C8 Input:DC42.0V/2.0A ZHEJIANGJINGSHENINDUSTRYCO.,LTD 28mm 60mm

FCCID:2BS96-E10PRO InternalPhotosoftheEUT Fig.1 Fig.2 FCCID:2BS96-E10PRO Fig.3 Fig.4 FCCID:2BS96-E10PRO Fig.5 Fig.6 BLEAntenna FCCID:2BS96-E10PRO Fig.7 Fig.8 FCCID:2BS96-E10PRO Fig.9 Fig.10

Page 1 of 2 RFExposureevaluation FCCID:2BS96-E10PRO 1.1.ApplicableStandard Accordingto§1.1307(b)(1),systemsoperatingundertheprovisionsofthissectionshallbeoperatedina mannerthatensuresthatthepublicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission’sguidelines. Accordingto§1.1310and§2.1093RFexposurerequirement KDB447498v06:MobileandPortableDevicesRFExposureProceduresandEquipmentAuthorization Policies 1.2.Requirement AccordingtoKDB447498D01GeneralRFExposureGuidancev06Section4.3.1StandaloneSARtest exclusionconsiderations:“UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures, standalone1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions, bymeasurementornumericalsimulation,isnotrequiredwhenthecorrespondingSARTestExclusion Thresholdcondition,listedbelow,issatisfied.Thesetestexclusionconditionsarebasedonsource-based time-averagedmaximumconductedoutputpoweroftheRFchannelrequiringevaluation,adjustedfortune-up tolerance,andtheminimumtestseparationdistancerequiredfortheexposureconditions.22Theminimum testseparationdistanceisdeterminedbythesmallestdistancefromtheantennaandradiatingstructuresor outersurfaceofthedevice,accordingtothehostformfactor,exposureconditionsandplatformrequirements, toanypartofthebodyorextremityofauserorbystander(see5)ofsection4.1).ToqualifyforSARtest exclusion,thetestseparationdistancesappliedmustbefullyexplainedandjustifiedbytheoperating configurationsandexposureconditionsofthetransmitterandapplicablehostplatformrequirements,typically intheSARmeasurementorSARanalysisreport,accordingtotherequiredpublishedRFexposureKDB procedures.WhennootherRFexposuretestingorreportingisrequired,astatementofjustificationand compliancemustbeincludedintheequipmentapproval,inlieuoftheSARreport,toqualifyfortheSARtest exclusion.Whenrequired,thedevicespecificconditionsdescribedintheotherpublishedRFexposureKDB proceduresmustbesatisfiedbeforeapplyingtheseSARtestexclusionprovisions;forexample,handheldPTT two-wayradios,handsets,laptops&tabletsetc.23“ [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)] · [√f(GHz)] ≤3.0for1-gSARand≤7.5for10-gextremitySAR,where: •f(GHz)istheRFchanneltransmitfrequencyinGHz •PoweranddistanceareroundedtothenearestmWandmmbeforecalculation •Theresultisroundedtoonedecimalplaceforcomparison • 3.0and7.5arereferredtoasthenumericthresholdsinthestep2below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis ≤ 50mmandfor transmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtestseparationdistanceis<5 mm,adistanceof5mmaccordingto5)insection4.1isappliedtodetermineSARtestexclusion. 1.3.Manufacturingtolerance BLE(Peak) GFSK ChannelChannel00Channel19Channel39 Target(dBm)1.01.01.0 Tolerance±(dB)1.01.01.0 2.EvaluationResult EvaluationResults Band/Modef(GHz) Antenna Distance (mm) RFoutputpower (includingtune-up tolerance) SARTest Exclusion Threshold SARTest Exclusion dBmmW BLE2.480521.58490.4992<3.0Yes Page 2 of 2 3.Conclusion ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1093fortheuncontrolledRFExposure andSARExclusionThresholdperKDB447498v06. .....................EndofReport.........................

ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd. 101#,BuildingK&BuildingT,TheSecondIndustrialZone,JiazitangCommunity, FenghuangStreet,GuangmingDistrict,Shenzhen,China FCCPART15SUBPARTCTESTREPORT FCCPART15.247 ReportReferenceNo........................: FCCID.................................................: GRCTR250802014-01 2BS96-E10PRO Compiledby (position+printedname+signature) .. : TestingEngineerJimmyWang Supervisedby (position+printedname+signature)..: ProjectEngineerKelleyZhang Approvedby (position+printedname+signature)..: ManagerSamWang Dateofissue.........................................:Aug.27,2025 TestingLaboratoryName................: ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd. Address ................................................. : 101#,BuildingK&BuildingT,TheSecondIndustrialZone,Jiazitang Community,FenghuangStreet,GuangmingDistrict,Shenzhen, China Applicant’sname...............................: ZhejiangjingshenlndustryCo.,ltd Address ................................................. : No.199Xixistreet,Linjianglndustrial,ParkWuchengDistrict,jinhua City,ZhejiangProvince Testspecification..............................: Standard................................................:FCCPart15.247 ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerand sourceofthematerial.ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd.takesno responsibilityforandwillnotassumeliabilityfordamagesresultingfromthereader'sinterpretationofthe reproducedmaterialduetoitsplacementandcontext. Testitemdescription ........................ : electricscooter TradeMark ............................................ : / Manufacturer ......................................... : ZhejiangjingshenlndustryCo.,ltd Model/Typereference.........................: E10ProMax ListedModels......................................: E8Pro,E8ProMax,E10Pro,C8,C8Pro,C8ProMax,C10,C10 Pro,C10ProMax,E8Pro-A,E8ProMax-A,E10Pro-A,E10ProMax- A,C8-A,C8Pro-A,C8ProMax-A,C10-A,C10Pro-A,C10ProMax- A,E8Pro-B,E8ProMax-B,E10Pro-B,E10ProMax-B,C8-B,C8Pro- B,C8ProMax-B,C10-B,C10Pro-B,C10ProMax-B,E8Pro-C,E8Pro Max-C,E10Pro-C,E10ProMax-C,C8-C,C8Pro-C,C8ProMax- C,C10-C,C10Pro-C,C10ProMax-C,E8Pro-D,E8ProMax-D,E10 Pro-D,E10ProMax-D,C8-D,C8Pro-D,C8ProMax-D,C10-D,C10 Pro-D,C10ProMax-D FirmwareVersion ................................. :V1.0 HardwareVersion................................:V1.0 Modulation ........................................... : GFSK Frequency.............................................. From2402MHzto2480MHz ReportNo.:GRCTR250802014-01Page 2 of 37 Ratings...................................................: 42.0V2.0A(chargedbyPowerAdapter)or 36.0V15.6Ah(ByLi-ionrechargeablebattery) Result ..................................................... : PASS ReportNo.:GRCTR250802014-01Page 3 of 37 TESTREPORT EquipmentunderTest:electricscooter Model/Type:E10ProMax ListedModels:E8Pro,E8ProMax,E10Pro,C8,C8Pro,C8ProMax,C10,C10 Pro,C10ProMax,E8Pro-A,E8ProMax-A,E10Pro-A,E10Pro Max-A,C8-A,C8Pro-A,C8ProMax-A,C10-A,C10Pro-A,C10Pro Max-A,E8Pro-B,E8ProMax-B,E10Pro-B,E10ProMax-B,C8- B,C8Pro-B,C8ProMax-B,C10-B,C10Pro-B,C10ProMax-B,E8 Pro-C,E8ProMax-C,E10Pro-C,E10ProMax-C,C8-C,C8Pro- C,C8ProMax-C,C10-C,C10Pro-C,C10ProMax-C,E8Pro-D,E8 ProMax-D,E10Pro-D,E10ProMax-D,C8-D,C8Pro-D,C8Pro Max-D,C10-D,C10Pro-D,C10ProMax-D Applicant : ZhejiangjingshenlndustryCo.,ltd Address: No.199Xixistreet,Linjianglndustrial,ParkWuchengDistrict, jinhuaCity,ZhejiangProvince Manufacturer : ZhejiangjingshenlndustryCo.,ltd Address: No.199Xixistreet,Linjianglndustrial,ParkWuchengDistrict, jinhuaCity,ZhejiangProvince TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:GRCTR250802014-01Page 4 of 37 Contents 1TESTSTANDARDS..............................................................................................................................5 2SUMMARY.................................................................................................................................................6 2.1GeneralRemarks..........................................................................................................................................6 2.2ProductDescription.....................................................................................................................................6 2.3EquipmentUnderTest.................................................................................................................................6 2.4ShortdescriptionoftheEquipmentunderTest(EUT).............................................................................7 2.5EUToperationmode.....................................................................................................................................7 2.6BlockDiagramofTestSetup.......................................................................................................................7 2.7RelatedSubmittal(s)/Grant(s)...................................................................................................................7 2.8Modifications.................................................................................................................................................7 3TESTENVIRONMENT........................................................................................................................8 3.1Addressofthetestlaboratory....................................................................................................................8 3.2TestFacility...................................................................................................................................................8 3.3Environmentalconditions...........................................…

Text truncated - open the document above for the full version.

FCCID:2BS96-E10PRO TestSetupPhotosoftheEUT TestSetupPhoto(s)ofRadiatedEmissionsMeasurement Fig.1 Fig.2 FCCID:2BS96-E10PRO TestSetupPhoto(s)ofConductedEmissionsMeasurement Fig.3 TestSetupPhoto(s)ofRFMeasurement Fig.4