2BSAZ-TP10Screen Mirroring Display

FCC ID LABEL: Ca. 15mm x 30mm Label Location FCC ID: 2BSAZ-TP10

FCC RF Exposure EUT Descrip tion: Screen Mirroring Display Model No.: TP10 FCC ID: 2BSAZ‐TP10 1. Limits According to KDB 447498 D01 General RF Exposure Guidance v06 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel, in cluding tune‐up tolerance, mW)/(min. test separation distance, mm)]·[√ f(GHz)]≤3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, Where: Result=P/D*√F F= the RF channel transmit frequency in GHz P=Maximum turn‐up power in mw D=Min. test separation distance in mm 2. Test Result of RF Exposur e Evaluation Frequency (MHz) Output power (dBm) Tune Up Power (dBm) Max Tune Up power (dBm/mW) Min test separation distance (mm) Result Limit SAR Test Exclusion EDR 2440 1.69 1±1 2/1.585 5 0.495 3.0 Pass 2.4G WiFi 2422 4.95 4±1 5/3.162 5 0.984 3.0 Pass 5.2G WiFi 5190 2.58 2±1 3/1.995 5 0.909 3.0 Pass Note: PK Output power= conducted power. Conducted power see the test report HK2508154600‐1E/2E/3E, BT antenna gain=2.25dBi, 2.4GWiFi antenna gain=1.63dBi, 5.2GWiFi antenna gain=1.76dBi. BT and 2.4GWiFi Simultaneous evaluation: 0.495 / 3 + 0.984/ 3= 0.493<1, SAR testing is not required Pe r KDB 447498 D01, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine RF Exposure test exclusion. The test exclusion threshold meets the requirements, SAR testing is not required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f (GHz)] f(GHz) is the RF channel transmit frequency in GHz Distance=5mm

ShenzhenJiexuntongWireless TechnologyCo.,Ltd AntennaSpecificationSheet Projectmodel：TP10 Antennafrequencyband：2400-2500MHz、5200MHz Version：V1.0 Effectivedate：2025-8-18 Testengineer： Address：409,BuildingA,No.30,AviationRoad,SanweiCommunity, HangchengStreet,Bao'anDistrict,Shenzhen ContactNumber：0755-23731203 Website：http://www.jxtant.com ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 2nd CATALOGUE 1SCOPE.........................................................................................................................................3 2TECHNICALINDEX..................................................................................................................3 3STRUCTURESPECIFICATION..............................................................................................1 7 4GENERALTECHNICALREQUIREMENTS..........................................................................1 9 5RELIABILITYCHARACTERISTICS......................................................................................1 9 6PRODUCTPACKAGING,STORAGE,ANDTRANSPORTATION......................................2 0 ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 3rd 1Scope Thisdocumentspecifiestheradiofrequencytechnicalindicatorsandthe externalstructureofthe"TP10WIFI/BTAntenna".Thisdocumentisapplicableto allaspectssuchasproductdesign,verification,productionandqualityinspection ofthe"TP10WIFI/BTAntenna",andthematerialdescriptionis:TP10WIFI/BT Antenna. 2Technicalindex 2.1Electricalspecification Technicalindex Frequencydomain(MHz)2400-2500、5150-5250 PolarizationmodeLinearpolarization Gain(dBi)≤3 VSWR≤3.0 Inputimpedance(Ω)50 JointcategoriesTheThirdGenerationController AntennacolorBlack Coaxiallinedimensions(mm)45 Form1 ： ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 4th 2.2VSWR Figure1：VSWR-2.4GWiFi ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 5th Figure2 ： VSWR-5GWiFi ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 6th Figure3：VSWR-BT ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 7th 2.3Gain&Efficiency WiFi：2400-2500MHz Freq(MHz)Gain(dBi)Efficiency(dB)Efficiency(%) 24001.525663553-3.92837466240.47273317 24101.632701353-3.92672837640.48807813 24201.514104475-3.97861861340.00719828 24301.463126751-3.95002278140.27149219 24401.319192469-3.99586573839.84863287 24501.538609794-3.8959217740.77630068 24601.552993985-3.91175083440.62795068 24701.369069396-3.88475436440.88128738 24801.382512303-3.88784076440.8522446 24901.473705282-3.81560444441.53742361 25001.399209099-3.8783067840.94202527 ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 8th WiFi：5150-5300MHz Freq(MHz)Gain(dBi)Efficiency(dB)Efficiency(%) 51501.621616264-5.08344565931.02097431 52001.761662194-5.04718166331.28108683 52501.728729275-5.01178449331.53708515 ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 9th BT：2400-2500MHz Freq(MHz)Gain(dBi)Efficiency(dB)Efficiency(%) 24001.806116724-6.78412586420.96946805 24101.843716643-6.73085487321.2282656 24201.486774075-6.75754367521.09821106 24301.356505207-6.79276258720.92780796 24401.601553312-6.90475262720.39504826 24501.908005684-6.66327646421.56117148 24601.64782602-6.47168790522.53363262 24701.70076377-6.35310955723.15735985 24802.212223053-6.32486177723.30847298 24902.249753027-6.20084526223.98366083 25001.899772357-6.1632567224.19214228 ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 10th 2.43D&2DDiagram WiFi-2400MHz ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 11th WiFi-2450MHz ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 12th WiFi-2500MHz ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 13th WiFi-5200MHz ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 14th BT-2400MHz ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 15th BT-2450MHz ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 16th BT-2500MHz ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 17th 3Structurespecification Figure3 ： WiFiStructuraldimensiondrawing Figure4 ： WiFiAntennapicture ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 18th Figure5：BTStructuraldimensiondrawing Figure6：BTAntennapicture ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 19th 4Generaltechnicalrequirements  Operatingtemperature:-30 °C to+70 °C ,humidity: ≤ 95%  Storagetemperature:-30 °C to+70 °C ,humidity:20%to80%  Testtemperature:15 °C to+30 °C ,humidity:40%to70%  Atmosphericpressure:86-106kPa  Transportationrequirements:Thepackagingmustberainproofand shockproof.Theouterpackagingshouldbemarkedwithfireprevention, moistureresistanceandchemicalresistance.  Requirementsforpackagingdroptestandrandomvibrationtest:Refer toitemsFALLOUT/VIBRATION/RANDOMinTABLE6of EN_3000190202v020102P(EnvironmentalEngineering(EE); EnvironmentalConditionsandEnvironmentalTestingfor TelecommunicationEquipment;Part2-2:EnvironmentalTesting Specifications;Transportation)asthestandard. 5Reliabilitycharacteristics Thefeasibilitytestwasconductedinaccordancewith"GB/T5080.7— 1986EquipmentReliabilityTest-VerificationTestSchemeunderthe AssumptionofConstantFailureRate".Thereliabilityoftheproductwas measuredbytheMeanTimeBetweenFailures(MTBF). Theaveragetimebetweenfailures(MTBF)oftheproductshallnotbe ShenzhenJiexuntongWirelessTechnologyCo.,LTDTP10WIFI/BTAntennaSpecificationSheetV1.0 20th lessthan100,000hours. 6Productpackaging,storage,andtransportation 6.1Productpackaging Theproductorpackagingshouldbemarkedwith:productname,model specification,standardnumber,manufacturer'snam…

Text truncated - open the document above for the full version.

Page 1 of 43 Report No.: HK2508154600-1E FCC Test Report Test Report On Behalf of Shenzhen Langyuan Technology Co., Ltd. For Screen Mirroring Display Model No.: TP10 FCC ID: 2BSAZ-TP10 Prepared For: Shenzhen Langyuan Technology Co., Ltd. Room 301, Building 1, Fuyong Yiku, Fuhai Street, Bao'an District, Shenzhen, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Aug. 12, 2025 ~ Aug. 28, 2025 Date of Report: Aug. 28, 2025 Report Number: HK2508154600-1E Page 2 of 43 Report No.: HK2508154600-1E Test Result Certification Applicant’s Name ................... : Shenzhen Langyuan Technology Co., Ltd. Address .................................... : Room 301, Building 1, Fuyong Yiku, Fuhai Street, Bao'an District, Shenzhen, China Manufacturer's Name ............. : Shenzhen Langyuan Technology Co., Ltd. Address .................................... : Room 301, Building 1, Fuyong Yiku, Fuhai Street, Bao'an District, Shenzhen, China Product Description Trade Mark ................................. : N/A Product Name ............................ : Screen Mirroring Display Model and/or Type Reference .. : TP10 Standards ................................ : 47 CFR FCC Part 15 Subpart C 15.247 KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10: 2020 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .............................................. : Date (s) of Performance of Tests ............... : Aug. 12, 2025 ~ Aug. 28, 2025 Date of Issue ............................................. : Aug. 28, 2025 Test Result ................................................. : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 43 Report No.: HK2508154600-1E Contents Page 1 Test Summary ................................................................................................................................................ 5 1.1 Test Description ......................................................................................................................................... 5 1.2 Measurement Uncertainty ......................................................................................................................... 6 1.3 Information of the Test Laboratory ............................................................................................................ 6 2 General Information ....................................................................................................................................... 7 2.1 General Description of EUT ...................................................................................................................... 7 2.2 Description of Test Conditions .................................................................................................................. 9 2.3 Description of Test Setup ........................................................................................................................ 10 2.4 Description of Support Units .................................................................................................................... 11 3 Equipments List for All Test Items ............................................................................................................. 12 4 Test Result .................................................................................................................................................... 13 4.1 Antenna Requirement.............................................................................................................................. 13 4.2 AC Conduction Emissions Measurement ................................................................................................ 14 4.3 Radiated Emissions Measurement .......................................................................................................... 18 4.4 Maximum Output Power Measurement ................................................................................................... 27 4.5 Power Spectral Density ........................................................................................................................... 28 4.6 6dB Bandwidth ........................................................................................................................................ 31 4.7 Occupied Bandwidth ................................................................................................................................ 34 4.8 Band Edge ............................................................................................................................................... 35 4.9 Conducted Spurious Emissions .............................................................................................................. 37 5 Test Setup Photos ....................................................................................................................................... 41 6 Photos of the EUT ........................................................................................................................................ 43 Page 4 of 43 Report No.: HK2508154600-1E ** Modified History ** Revision Description Issued Date Remark Revision 1.0 Initial Test Report Release Aug. 28, 2025 Jason Zhou Page 5 of 43 Report No.: HK2508154600-1E 1 Test Summary 1.1 Test Description Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Tes…

Text truncated - open the document above for the full version.

Page 1 of 72 Report No.: HK2508154600-2E FCC Test Report Test Report On Behalf of Shenzhen Langyuan Technology Co., Ltd. For Screen Mirroring Display Model No.: TP10 FCC ID: 2BSAZ-TP10 Prepared For: Shenzhen Langyuan Technology Co., Ltd. Room 301, Building 1, Fuyong Yiku, Fuhai Street, Bao'an District, Shenzhen, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Aug. 12, 2025 ~ Aug. 28, 2025 Date of Report: Aug. 28, 2025 Report Number: HK2508154600-2E Page 2 of 72 Report No.: HK2508154600-2E Test Result Certification Applicant’s Name .................. : Shenzhen Langyuan Technology Co., Ltd. Address .................................. : Room 301, Building 1, Fuyong Yiku, Fuhai Street, Bao'an District, Shenzhen, China Manufacturer's Name ........... : Shenzhen Langyuan Technology Co., Ltd. Address .................................. : Room 301, Building 1, Fuyong Yiku, Fuhai Street, Bao'an District, Shenzhen, China Product Description Trade Mark ............................. : N/A Product Name ......................... : Screen Mirroring Display Model and/or Type Reference : TP10 Standards ............................... : FCC Rules and Regulations Part 15 Subpart C Section 15.247 ANSI C63.10: 2020 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of Performance of Tests ............ : Aug. 12, 2025 ~ Aug. 28, 2025 Date of Issue ........................................... : Aug. 28, 2025 Test Result ............................................... : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 72 Report No.: HK2508154600-2E Table of Contents 1. Test Result Summary ............................................................................... 5 1.1 Test Procedures and Results ........................................................................................................... 5 1.2 Information of the Test Laboratory ................................................................................................. 5 1.3 Measurement Uncertainty ................................................................................................................ 6 2. EUT Description ........................................................................................ 7 2.1 General Description of EUT ............................................................................................................. 7 2.2 Carrier Frequency of Channels ........................................................................................................ 8 2.3 Operation of EUT during Testing ..................................................................................................... 8 2.4 Description of Test Setup ................................................................................................................. 9 3. General Information ................................................................................ 10 3.1 Test Environment and Mode .......................................................................................................... 10 3.2 Description of Support Units ......................................................................................................... 12 4. Test Results and Measurement Data .................................................... 13 4.1 AC Conducted Emission ................................................................................................................ 13 4.2 Test Result ....................................................................................................................................... 15 4.3 Maximum Peak Conducted Output Power .................................................................................... 17 4.4 Emission Bandwidth ....................................................................................................................... 20 4.5 Power Spectral Density .................................................................................................................. 26 4.6 Conducted Band Edge and Spurious Emission Measurement .................................................. 33 4.7 Radiated Spurious Emission Measurement ................................................................................. 43 4.8 Antenna Requirement ..................................................................................................................... 69 5. Photographs of Test ............................................................................... 70 6. Photos of the EUT ................................................................................... 72 Page 4 of 72 Report No.: HK2508154600-2E ** Modified History ** Revision Description Issued Date Remark Revision 1.0 Initial Test Report Release Aug. 28, 2025 Jason Zhou Page 5 of 72 Report No.: HK2508154600-2E 1. Test Result Summary 1.1 Test Procedures and Results Requirement CFR 47 Section Result Antenna Requirement §15.203/§15.247(b)(4) PASS AC Power Line Conducted Emission §15.207 PASS Conducted Peak Output Power §15.247(b)(3) PASS 6dB Emission Bandwidth §15.247(a)(2) PASS Power Spectral Density §15.247(e) PASS Band Edge §15.247(d) PASS Spurious Emission §15.205/§15.209 PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided b…

Text truncated - open the document above for the full version.

Page 33 of 72 Report No.: HK2508154600-2E 4.6 Conducted Band Edge and Spurious Emission Measurement Test Specification Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: KDB 558074 D01 15.247 Meas Guidance v05r02 Limit: In any 100 kHz bandwidth outside of the authorized frequency band, the emissions which fall in the non-restricted bands shall be attenuated at least 20 dB / 30dB relative to the maximum PSD level in 100 kHz by RF conducted measurement and radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209(a). Test Setup: Test Mode: Transmitting mode with modulation Test Procedure: 1. The testing follows FCC KDB Publication 558074 D01 15.247 Meas Guidance v05r02. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Set RBW = 100 kHz, VBW=300 kHz, Peak Detector. Unwanted Emissions measured in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at least 20 dB relative to the maximum in-band peak PSD level in 100 kHz when maximum peak conducted output power procedure is used. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30 dB instead of 20 dB per 15.247(d). 5. Measure and record the results in the test report. 6. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. Test Result: PASS Page 34 of 72 Report No.: HK2508154600-2E Test Instruments RF Test Room Equipment Manufacturer Model Serial Number Calibration Date Calibration Due Spectrum analyzer Agilent N9020A HKE-025 Feb. 19, 2025 Feb. 18, 2026 Spectrum analyzer Agilent N9020A HKE-117 Feb. 19, 2025 Feb. 18, 2026 High pass filter unit Tonscend JS0806-FHKE-055 Feb. 19, 2025 Feb. 18, 2026 RF Cable (9KHz-26.5GHz) Tonscend 170660 N/A Feb. 19, 2025 Feb. 18, 2026 RF automatic control unit Tonscend JS0806-2HKE-060 Feb. 19, 2025 Feb. 18, 2026 RF Test software Tonscend JS1120-3 Version 3.5.39 HKE-083 N/A N/A Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Page 35 of 72 Report No.: HK2508154600-2E Test Data 802.11b Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 36 of 72 Report No.: HK2508154600-2E Middle Channel Spurious Emission Page 37 of 72 Report No.: HK2508154600-2E 802.11g Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 38 of 72 Report No.: HK2508154600-2E Middle Channel Spurious Emission Page 39 of 72 Report No.: HK2508154600-2E 802.11n (HT20) Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 40 of 72 Report No.: HK2508154600-2E Middle Channel Spurious Emission Page 41 of 72 Report No.: HK2508154600-2E 802.11n (HT40) Modulation Lowest Channel Highest Channel Band Edge Band Edge Spurious Emission Spurious Emission Page 42 of 72 Report No.: HK2508154600-2E Middle Channel Spurious Emission Page 43 of 72 Report No.: HK2508154600-2E 4.7 Radiated Spurious Emission Measurement Test Specification Test Requirement: FCC Part15 C Section 15.209 Test Method: ANSI C63.10: 2020 Frequency Range: 9 kHz to 25 GHz Measurement Distance: 3 m Antenna Polarization: Horizontal & Vertical Operation Mode: Transmitting mode with modulation Receiver Setup: Frequency Detector RBW VBW Remark 9kHz- 150kHzQuasi-peak200Hz 1kHz Quasi-peak Value 150kHz- 30MHz Quasi-peak9kHz 30kHz Quasi-peak Value 30MHz-1GHzQuasi-peak120KHz300KHz Quasi-peak Value Above 1GHz Peak 1MHz 3MHz Peak Value Peak 1MHz 10Hz Average Value Limit: Frequency Field Strength (microvolts/meter) Measurement Distance (meters) 0.009-0.490 2400/F(KHz) 300 0.490-1.705 24000/F(KHz) 30 1.705-30 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Frequency Field Strength (microvolts/meter) Measurement Distance (meters) Detector Above 1GHz 500 3 Average 5000 3 Peak Test Setup: For radiated emissions below 30MHz Page 44 of 72 Report No.: HK2508154600-2E 30MHz to 1GHz Above 1GHz Test Procedure: 1. For the radiated emission test below 1GHz: The EUT was placed on a turntable with 0.8 meter above ground. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high PASS filter are used for the test in order to get better signal level. 2. For the radiated emission test above 1GHz: Place the measurement antenna on a turntable with 1.5 meter above ground, which is away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. Page 45 of 72 Report No.: HK2508154600-2E The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level 4. For measurement below 1GHz, If the emission level of the EUT measured by the peak detector is 3 dB lower than the applicable l…

Text truncated - open the document above for the full version.

Test Model: TP10 Radiated Emission AC Conducted Emission RF Conducted Emission

Test Model: TP10 Radiated Emission AC Conducted Emission RF Conducted Emission