2BSBN-PQ100-HNanoHydra

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen iNewMe Technology Co., Ltd Grantee code: 2BSBN FCC ID: FRN: 0037526167 Contact Name: gary liu Address: Building 6, West Wing 801, TianAn Cloud Park(Plot 02-07) , Gangtou Community, Bantian Street, Longgang District, Shenzhen Telephone No: 18179825925 Fax No: N/A Email: [email protected] i.[Shenzhen iNewMe Technology Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii.[Shenzhen iNewMe Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not(as a specifically named entity or any of its subsidiaries or affiliates)identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen iNewMe Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment . Date: 2025-10-15 Applicant’s Name: gary liu Title:Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist 2BSBN-PQ100-H

Shenzhen iNewMe Technology Co., Ltd Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐Yes, go to Item 2. ☑No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device NanoHydra Company name Shenzhen iNewMe Technology Co., Ltd Grantee code 2BSBN FCC ID 2BSBN-PQ100-H FRN 0037526167 Contact name gary liu Address Building 6, West Wing 801, TianAn Cloud Park(Plot 02-07) , Gangtou Community, Bantian Street, Longgang District, Shenzhen Telephone number 18179825925 [email protected] Chipset/module information JL7012F6, FM17611 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 3 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher 3 RAM: 1 GB 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐Yes, go to Item 3. ☑No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3.Connectivity Capabilities: 4 # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☑Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: gary liu Date:2025-10-15 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

TCB CALL página 1 File FCC ID: 2BSBN-PQ100-H Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://opencorporates.com/companies/us_il/LLC_12842678 In google: TCB CALL página 2 Bank information TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

Shenzhen iNewMe Technology Co., Ltd Building 6, West Wing 801, TianAn Cloud Park(Plot 02-07) , Gangtou Community, Bantian Street, Longgang District, Shenzhen Date: 2025-11-5 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BSBN-PQ100-H FRN: 0037526167 US Agent – Attestation Statement / Part 2.911(d)(7) Shenzhen iNewMe Technology Co., Ltdcertifies, that as of 2025-11-5, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BSBN-PQ100-H. Shenzhen iNewMe Technology Co., Ltd, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Shenzhen iNewMe Technology Co., Ltd for FCC ID: 2BSBN-PQ100-H. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Shenzhen iNewMe Technology Co., Ltd. Designated Agent: FCC US Agent, LLC Company Representative: gary liu Designated Agent Representative: Tim Payne Signature: Signature:

C5266091_X10_Ed.2 1/1 Shenzhen iNewMe Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:2025-10-15 Subject: Request for Confidentiality FCC ID: To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☒ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of __180__ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 2BSBN-PQ100-H C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: gary liu Title:manager

C5266091_X8_Ed.1 1/1 Letter of Authorization < Shenzhen iNewMe Technology Co., Ltd > Company: Shenzhen iNewMe Technology Co., Ltd Address: Building 6, West Wing 801, TianAn Cloud Park(Plot 02-07) , Gangtou Community, Bantian Street, Longgang District, Shenzhen Product Name: NanoHydra Model Number: PQ100-H FCC Identifier: We authorize LGAI Technological Center S.A., Ronda de la Font delCarme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: gary liu Date: 17/10/2025 Title: manager Signature of applicant: 2BSBN-PQ100-H

FCC ID: 2BSBN-PQ100-H Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BT: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculation SAR Exclusion threshold SAR test exclusion 2.4022.051.602±132.00<50.618473.00YES 2.441 2.23 1.672±132.00<50.623473.00YES 2.480 2.05 1.602±132.00<50.628433.00YES 2.402 2.49 1.772±132.00<50.618473.00YES 2.441 2.76 1.892±132.00<50.623473.00YES 2.480 2.52 1.792±132.00<50.628433.00YES 2.402 2.63 1.832±132.00<50.618473.00YES 2.441 2.9 1.952±132.00<50.623473.00YES 2.480 2.69 1.862±132.00<50.628433.00YES 2.402 -0.97 0.800±111.26<50.390233.00YES 2.440 -0.74 0.840±111.26<50.393303.00YES 2.480 -0.91 0.810±111.26<50.396513.00YES 2.402 -0.94 0.810±111.26<50.390233.00YES 2.440 -0.69 0.850±111.26<50.393303.00YES 2.480 -0.89 0.810±111.26<50.396513.00YES GFSK π/4- DQPSK 8-DPSK BLE 1M BLE 2M Conclusion: For the max result : 0.62843≤ 3.0 for 1g SAR, SAR is not required. NFC： Antenna Type: Internal antenna Antenna Gain: 0dBi Nominal field strength: 49.64dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB According to the KDB 447498: Based on the Maximum allowed field strength of production tolerance was 52.64dBμV/m at 3m in frequency 13.56MHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 0.000055mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power = 0.000055mW. The SAR Exclusion Threshold Level for 13.56MHz when the minimum test separation According to KDB447498 D01, 4.3 General SAR test exclusion guidance distance is < 50mm: SAR test exclusion= [474 * (1 + log(100/f (MHz) )]/2 = 442.7mW Conclusion: Since the above conducted output power is well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing. Signature: Date: 2025-10-27 NAME AND TITLE (Please print or type): Alex Li/Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China

Report No.: N25090304318E Version.1.3 Page 1 of 78 RADIO TEST REPORT FCC ID: 2BSBN-PQ100-H Product: NanoHydra Trade Mark: Model No.: PQ100-H Family Model: N/A Report No.: N25090304318E Issue Date: Sept. 26, 2025 Prepared for Shenzhen iNewMe Technology Co., Ltd Building 6, West Wing 801, TianAn Cloud Park(Plot 02-07) , Gangtou Community, Bantian Street, Longgang District, Shenzhen Prepared by Shenzhen NTEK Testing Technology Co., Ltd. No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China Tel. 0755-23200050 Website: http://www.ntek.org.cn Report No.: N25090304318E Version.1.3 Page 2 of 78 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.1.1 Applicable Standard .................................................................................................................................. 14 7.1.2 Conformance Limit ................................................................................................................................... 14 7.1.3 Measuring Instruments............................................................................................................................. 14 7.1.4 Test Configuration .................................................................................................................................... 14 7.1.5 Test Procedure ........................................................................................................................................... 14 7.1.6 Test Results ................................................................................................................................................ 15 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.2.1 Applicable Standard .................................................................................................................................. 17 7.2.2 Conformance Limit ................................................................................................................................... 17 7.2.3 Measuring Instruments............................................................................................................................. 18 7.2.4 Test Configuration .................................................................................................................................... 18 7.2.5 Test Procedure ........................................................................................................................................... 19 7.2.6 Test Results ................................................................................................................................................ 20 7.3 6DB BANDWIDTH ....................................................................................................................................... 26 7.3.1 Applicable Standard .................................................................................................................................. 26 7.3.2 Conformance Limit ................................................................................................................................... 26 7.3.3 Measuring Instruments............................................................................................................................. 26 7.3.4 Test Setup .................................................................................................................................................. 26 7.3.5 Test Procedure ........................................................................................................................................... 26 7.3.6 Test Results ................................................................................................................................................ 26 7.4 DUTY CYCLE .........................................................................…

Text truncated - open the document above for the full version.

-1 - 产 品 技 术 规 格 书 SPECIFICATION 拟制Prepared by： 审核Checked by ： 批准Approved by： 送样日期Formed On 产品版本Document Version ( V1.1 ) 产品型号 PART NO： 客户料号CUSTOMER PART NO： 客户确认CUSTOMER APPROVED BY： 确认日期APPROVED DATE： LTA312450-P30 ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] 2 目 录 Table of contents 规格书版本更改记录 Version rejigger track record ..............................3 1. 概述 Introduction..................................................................4 2. 型号 Part Number...............................................................4 3. 外型尺寸及测试板焊盘尺寸 Dimensions.....................4～5 4. 测试电路和匹配电路 Evaluation Board and Matching Circuits............5 5. 电气性能 Electrical Characteristics..........................................6 6. 特性曲线 Characteristic curve...................................................6 7. 方向图 Radiation Pattern...................................................7～8 8. 可靠性试验后允许误差 Post Dependability Tolerance ...............9 9. 可靠性试验 Dependability Test..........................................9～10 10. 回流焊温度 Reflow Soldering Standard Condition.....................10 11. 包装尺寸 Packaging and Dimensions ....................................11 ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] 3 产品规格书版本更改记录 Version rejigger track record 版本号 Version 更改记录 Rejigger 拟制 Prepared 批准 Approve 日期 Date V1.0 首次发行 2015.10.22 备注： 1、更改产品电性能指标时，版本号需更换（V1.0换为V2.0、V3.0......）； 2、更改产品测试方法（包括可靠性测试条件），或更改使用条件时，当前版本号加系列（V1.0 换为V1.1、V1.2......）。 ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] -4 - 产品尺寸/Size：3.2×1.6×1.2 1. 概述 INTRODUCTION 微波多层陶瓷天线LA系列产品设计用于WLAN、WiFi、蓝牙、PHS，手机 多频天线, FM等小体积SMD片式设计。 Microwave Multi-Layer Ceramic Antenna LA series are designed to be used in WLAN、WiFi、Bluetooth、PHS、 Multiple-band Mobile phone antenna, FM, etc and compact size SMD chip design. 2. 型号 Part Number LTA 31 2450 -P30 3. 外型尺寸及测试板焊盘尺寸 Dimensions（Unit：mm） 天线频率/ Antenna Frequency: 2450 MHz 多层结构天线/Multi-layer Antenna 产品名称，编号/Proudct Name ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] 5 4. 测试电路和匹配电路 Evaluation Board and Matching Circuits 5.6nH 0.5pF 50ΩFeeding Line GND VIA πType Matching Network Clearance Area 2.25 5.0 4.0 1 . 8 0 . 7 4 0 . 7 4 0 . 6 3 1 . 7 7 1.63 1.0 Unit:mm ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] 6 - 5. 电气性能 Electrical Characteristics No. Item （项目） Specifications （特性） 5.1 Central Frequency 中心频率(No matching) 2545MHz (带匹配电路测试)After Matching 2450 MHz 5.2 Band Width 通带宽度 80MHz typ. 5.3 Peak Gain 峰值增益 6.62 dBi 5.4 V.S.W.R (in BW) 驻波比 ≤2.0 5.5 Polarization 极化方式 Linear 线性 5.6 Azimuth Beam width 方位角 Omni-directional 全向 5.7 Impedance 阻抗 50 Ω 6. 特性曲线 Characteristic curve ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] 7 7. 方向图及效率 Radiation Pattern & Efficiency coordinates： X-Z Plane Plane X-Y Plane ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] 8 - Y-Z Plane 3D Radiation Pattern Frequency (MHz) 2400 2450 2500 Avg. Gain (dBi) -1.54 -1.20 -1.125 Peck Gain (dBi) 4.81 6.62 5.53 Efficiency (%) 65.5 72.9 70.8 ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] 9 8可靠性试验后允许误差 Post Dependability Tolerance 经可靠性试验后允许比起始读数偏差见下表 No. Item （项目） Post Dependability Tolerance (可靠性试验后允许附加误差) 8.1 Central Frequency 中心频率 ±5 MHz 8.2 Band Width 通带宽度 ±5 MHz 8.3 Gain 增益 ±0.1 dBi 8.4 V.S.W.R (in BW) 驻波比 ±0.1 Post Dependability Tolerance ( Refer to the table ) 9 可靠性试验 Dependability Test 基准条件：温度范围 Temperature range 25±5°C 相对湿度范围 Relative Humidity range 55~75%RH 工作温度 Operating Temperature range -40°C~+85°C 贮藏温度 Storage Temperature range -40°C~+85°C 9.1 耐振动 Vibration Resist 在振动频率为10~55Hz振幅为1.5mm 沿X.Y.Z方向各振动2小时后测试符合表9.1~9.4规定。 The device should satisfy the electrical characteristics specified in paragraph 9.1~9.4 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions. 9.2 耐跌落冲击 Drop Shock 在100cm高度处按X，Y，Z三个面分别自由跌落在木制地板上共3次后测试符合表9.1~9.4规 定。 The device should satisfy the electrical characteristics specified in paragraph9.1~9.4 after dropping onto the hard wooden board from the height of 100cm for 3 times each facet of the 3 dimensions of the device. 9.3 耐焊接热 Solder Heat Proof 能承受经120~150°C的温度预热120秒后，在255°C+10°C的焊锡浸5±0.5秒，或300°C-10°C的 电烙铁焊接3±0.5秒，焊接面无损伤。 The device should be satisfied after preheating at 120°C~150°C for 120 seconds and dipping in soldering Sn at 255°C+10°C for 5±0.5 seconds，or electric iron 300°C-10°C for 3±0.5 seconds， without damnify. 9.4 结合力试验 Tensile Strength of Terminal 在产品电极端子上或表面上应能承受1kg垂直拉力10±1秒。 The device should not be broken after tensile force of 1.0kg is slowly applied to pull a lead pin of the fixed device in the lead axis direction for 10±1 seconds. ANTENNA 深圳市森美嘉电子有限公司 13510385948 [email protected] -10 - 9.5 耐弯曲试验 Bending Resist Test 将产品按图焊在1.6±0.2mm的 PCB 板中间，由箭头方向施 力：1mm/S，弯曲距离：1.5mm，保持5±1S，产品金属层无脱落。 Weld the product to the center part of the PCB with the thickness 1.6±0.2mm as the illustration shows, and keep exerting force arrow-ward on it at speed of :1mm/S , and hold for 5±1S at the position of 1.5mm bending distance , so far , any peeling off of the product metal coating should not be detected . 9.6 耐湿热特性 Moisture Proof 在温度为60±2°C，相对湿度90~95%的恒温湿箱中放置96小时，在常温中恢复1~2小时后测 试，符合表9.1~9.4规定。 The device should satisfy the electrical characteristics specified in paragraph 9.1~9.4 after exposed to the temperature 60±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condlition. 9.7 高温特性 High Temperature Endurance 在温度为85±5°C的恒温箱中放置96±2小时，在常温中恢复1~2小时后测试。符合表9.1~9.4 规定。 The device should satisfy the electrical characteristics specified in paragraph9.1~9.4 after exposed to temperature 85±5°Cfor 96±2 hours and 1~2 hours recovery time under normal temperature. 9.8 低温特性 Low Temperature Endurance 在温度为-40°C±5°C低温箱中放置96±2小时后恢复1~2小时测试符合表9.1~9.4规定。 The device should also satisfy the electrical characteristics specified in paragraph 9.1~9.4 after exposed to the temperature -40°C±5°C for 96±2 hours and to 2 hours recovery time under normal temperature. 9.9 温度循环 Temperature Cycle Test 在-40°C温度中保持30分钟，再在+85°C温度中保持30分钟，共循环5…

Text truncated - open the document above for the full version.