2BSIGLXCO5LIXO ATOM-LXCO-5

4. [Option with Roof antenna] Installation of the roof antenna for 4G/GPS 9. Regulatory 9.1. Supplier’s Declaration of Conformity - FCC (USA) 9.2. Supplier’s Declaration of Conformity - IC (Canada) 9.3. Radiofrequency radiation exposure Information Pass the camera cable and screw in the M12 connector Add the waterproof silicone tape around the connector and screwthe camera onto its bracket (screws supplied with the camera) ● ● ● ● ●

V01222025 Certification for Designating a U.S. Agent for Service of Process In compliance with section 2.911(d)(7), all applicants are required to appoint a U.S.-based contact to serve as their agent for service of process. This requirement applies to both domestic and foreign applicants. Entities located within the United States are permitted to designate themselves as their own agent for this purpose. Regardless of the applicant’s status, the designation of the U.S. agent must be included as an attachment to the equipment authorization application. The written certification must adhere to the following requirements: 1. It must bear the signatures of both the applicant and the designated U.S. agent for service of process, provided the agent is a separate entity from the applicant. 2. It must clearly state the applicant’s consent and confirm the agent’s obligation to accept service of process on the applicant’s behalf. 3. It must include a physical address and email address located in the United States for the designated agent. 4. It must acknowledge that the applicant will maintain the designated agent’s role for at least one year after ceasing all marketing and importation activities or upon the conclusion of any FCC-related proceedings involving the equipment. Key Details Regarding the U.S. Agent for Service of Process: ● The agent cannot be a Telecommunication Certification Body (TCB) or have affiliations with one (e.g., the agent cannot work for or be owned by a TCB or a related company). ● The agent must not be an FCC-recognized testing laboratory or have affiliations with one (e.g., the agent cannot work for or be owned by a test lab or a related company). ● The agent may be an individual or a company entity. ● The designated agent entity must have a physical U.S. address and phone number. ● It is recommended that the agent possess a Federal Registration Number (FRN), and including the FRN in the agent letter is considered best practice. ● The agent designation letter may be general for the grantee and is not required to be FCC ID-specific. If there is a change in the U.S. Agent for Service of Process for devices that are still being marketed or have ceased marketing for less than one year, the TCB must request the FCC to place the application in Audit Mode for every relevant TC Number. The updated agent letter will then need to supersede the previous version. Important Note: The role of the U.S. Agent for Service of Process should not be confused with the authorized agent responsible for signing the FCC Form 731, cover letters included in the application, or the agent who interacts directly with the TCB. Note for Attestation Letter: Print the attestation letter onto the manufacturer's corporate letterhead prior to submission. V01222025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 United States Date: Dec 23, 2025 Ref: Attestation Statement Part 2.911(d)(7) Filing FCC ID: 2BSIG-LXCO5 LIXO certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi “iCertifi” is our designated U.S. agent for service of process for the above referenced FCC ID. LIXO accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Information: Name Americas Compliance consulting, LLC dba iCertifi FCC FRN 0033399411 Address 2445 NE Division Street, Suite 202 Bend, OR 97703 United States Contact Person Paul Preston Telephone +1-866-885-4575 Email [email protected] Sincerely, LIXO Americas Compliance Consulting LLC dba iCertifi 0037548138 0033399411 Igor RAJZBAUM Paul Preston Head of Embedded Systems President/CEO Signature

2J6941MGF Product Datasheet Key Features Cable 1: CELLULAR / LTE - 698-960 MHz - 1710-2170 MHz - 2500-2700 MHz Cable 2: GPS/GLONASS/QZSS/Galileo - 1575-1606 MHz Magnetic Mount Low Profile High Performance Pre-Filtered GNSS Ground Plane Independent Customizable Cable and Connector Dimensions 89 × 76 × 27 mm Certificates: IP67, IP69 www.2j-antennae.comwww.2j-antennasusa.com Page: 1/10 CELLULAR/LTE and GNSS Magnetic Mount Cable 2 Parameters Standard Band (MHz) Frequency(MHz) Patch Size (mm) Return Loss (dB) VSWR Impedance Radiation Pattern Polarization Saw Filter Active Gain (dB) Noise Figure (dB) Voltage (V) Current (mA) Power Consumption (mW) ESD Protection (kV) Connector Type Cable Length Cable Type GPS/GLONASS Antenna 18 × 18 × 4 <=-15.0 dB <=1.4:1 dB 50 Hemispherical RHCP Pre-filter 28 @ 2.7 V 1.5 Typ 1.5 - 3.6 9 Typ 24.3 Typ 2kV SMA-Male Standard (Other Connectors Available) 300 cm Standard (Any Cable Length Available) D100 Standard (Other Cables Available) GPS/QZSS/Galileo 1575 1575.42 GLONASS 1602 1598-1606 www.2j-antennae.comwww.2j-antennasusa.com Page: 2/10 1. Antenna and electrical specifications Parameters Standards Band (MHz) Frequency (MHz) Return Loss (dB) VSWR Efficiency (%) Peak Gain (dBi) Average Gain (dB) Impendance (Ohm) Polarisation Radiation Pattern Max. Input Power (W) Connector Type Cable Length Cable Type 700/850/900 698-960 ~-10.6 ~1.9:1 ~55.9 ~4.2 ~-2.5 CELLULAR / LTE Antenna 2G,3G and 4G 1700/1800/1900/2100 1710-2170 ~-10.5 ~1.9:1 ~50.6 ~5.6 ~-3.1 50 Linear Omni-Directional 25 SMA-Male Standard (Other Connectors Available) 300 cm Standard (Any Cable Length Available) D302 Standard (Other Cables Available) 2600 2500-2700 ~-20.6 ~1.3:1 ~60.3 ~5.8 ~-2.4 Cable 1 Antenna Measurement Conditions: Mounted on 30 x 30 x 0.25 cm ABS Plate 200 cm of Cable D302 Measured in Certified CTIA 3D Anechoic Chamber www.2j-antennae.comwww.2j-antennasusa.com Page: 3/10 2. Mechanical and environmental specifications Specifications Mounting Type Dimensions (mm) Radome Type Radome Color Operating Temperature (C) Storage Temperature (C) Substance Compliance Certificates 2J6941MGF 89 × 76 × 27 ABS UV Stable Black, White -40 to +85 -40 to +85 RoHS IP67, IP69, Magnetic Mount www.2j-antennae.comwww.2j-antennasusa.com Page: 4/10 3. Antenna parameters Cable 1: CELLULAR/LTE -15 -10 -5 0 6007008009001000110012001300140015001600170018001900200021002200230024002500260027002800 R e tu rn L os s (dB) Frequency (MHz) 0 1 2 3 4 5 6 7 6007008009001000110012001300140015001600170018001900200021002200230024002500260027002800 V S WR Frequency (MHz) www.2j-antennae.comwww.2j-antennasusa.com Page: 5/10 0 10 20 30 40 50 60 70 6007008009001000110012001300140015001600170018001900200021002200230024002500260027002800 E f ficie n cy (%) Frequency (MHz) 0 1 2 3 4 5 6 7 6007008009001000110012001300140015001600170018001900200021002200230024002500260027002800 P eak G ain (dBi) Frequency (MHz) -4 -3 -2 -1 0 6007008009001000110012001300140015001600170018001900200021002200230024002500260027002800 A v er ag e Gain (d B) Frequency (MHz) www.2j-antennae.comwww.2j-antennasusa.com Page: 6/10 Radiation pattern reference 750 and 850 MHz Radiation pattern Cable 1: CELLULAR/LTE www.2j-antennae.comwww.2j-antennasusa.com Page: 7/10 940 and 1750 MHz Radiation pattern 1850 and 1950 MHz Radiation pattern www.2j-antennae.comwww.2j-antennasusa.com Page: 8/10 2100 and 2600 MHz Radiation pattern www.2j-antennae.comwww.2j-antennasusa.com Page: 9/10 4. Antenna drawings Magnetic Mount option 27 ±1 89 ±2 76 ±2 Cable Length www.2j-antennae.comwww.2j-antennasusa.com Page: 1/100 5. Antenna Images

Lixo +33625001920 34 rue Godot de Mauroy 75009 [email protected] FRANCE Igor RAJZBAUM December, 10. 2025 Paris 2BSIG LXCO5

Annex A101 - Photographs No. 1-9789-25-01-01_TR1-A101-R01 March 31, 2026 DescriptionExternal photos of EUT This document is electronically signed and valid without handwritten signature. Public keys for verifcation of the electronic signatures can be requested at the testing laboratory. Michael Dorongovski Lab Manager/ Telecommunication Certification Body (USA/CAN/ JPN) Regulatory Services Radio / Assessment &Approvals authorized by cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A101-R01 Page 1 of 6 Photo 1 Photo 2 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A101-R01 Page 2 of 6 Photo 3 Photo 4 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A101-R01 Page 3 of 6 Photo 5 Photo 6 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A101-R01 Page 4 of 6 Photo 7 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A101-R01 Page 5 of 6 Document History End of document ReleaseApplied changesRelease date R01initial releaseMarch 31, 2026 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A101-R01 Page 6 of 6

Label FCC for LXCO-5 Dimensions: 63,5 x 29,6 mm Type of Label: Adhesive Silver Heavy Duty Labels, Water, dirt UV and temperature (-40°C to + 150°C) resistant, tearproof This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES (B) / NMB (B) Contains FCC ID: 2AL6KBLM8723DU1 Contains IC: 20944-BLM8723DU1 FCC-ID: 2BSIGLXCO5 ISED-Nr: 34637-LXCO5 LXCO-5

Annex A102 - Photographs No. 1-9789-25-01-01_TR1-A102-R01 March 31, 2026 DescriptionInternal photos of EUT This document is electronically signed and valid without handwritten signature. Public keys for verifcation of the electronic signatures can be requested at the testing laboratory. Michael Dorongovski Lab Manager/ Telecommunication Certification Body (USA/CAN/ JPN) Regulatory Services Radio / Assessment &Approvals authorized by cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A102-R01 Page 1 of 8 Photo 1 Photo 2 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A102-R01 Page 2 of 8 Photo 3 Photo 4 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A102-R01 Page 3 of 8 Photo 5 Photo 6 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A102-R01 Page 4 of 8 Photo 7 Photo 8 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A102-R01 Page 5 of 8 Photo 9 Photo 10 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A102-R01 Page 6 of 8 Photo 11 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A102-R01 Page 7 of 8 Document History End of document ReleaseApplied changesRelease date R01initial releaseMarch 31, 2026 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-01_TR1-A102-R01 Page 8 of 8

Test Report No. 1-9789-25-01-06_TR1-R01 March 12. 2026 ApplicantLIXO ProductLIXO ATOM-LXCO-5 ModelLIXO ATOM-LXCO-5 Tested TechnologyLTE Test StandardFCC 47 CFR Part 2 VerdictTEST EXEMPTION FULFILLED The test results apply only to the equipment specified in this document. This test report is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Alexander Hnatovskiy Coordinator Area Regulatory Services Radio authorized by Eric Tuettmann Testing Manager Regulatory Services Radio created by cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-06_TR1-R01 Page 1 of 16 Table of Contents 1.Disclaimer....................................................................................................................................................3 2.Document history..........................................................................................................................................4 2.1.Current release.................................................................................................................................................................................4 2.2.Previous releases.............................................................................................................................................................................4 3.Test laboratory..............................................................................................................................................5 3.1.Contact information.........................................................................................................................................................................5 3.2.Involved test locations......................................................................................................................................................................5 3.3.Subcontracted laboratories...............................................................................................................................................................5 3.4.Laboratory listings and recognitions.................................................................................................................................................5 4.Client information.........................................................................................................................................6 4.1.Applicant..........................................................................................................................................................................................6 4.2.Manufacturer....................................................................................................................................................................................6 5.Test sample information...............................................................................................................................7 5.1.General Information.........................................................................................................................................................................7 5.1.1.General Data of Main EUT as Declared by Applicant...................................................................................................................7 6.Measurement details....................................................................................................................................8 6.1.Test methodology.............................................................................................................................................................................8 7.Description of the test setup.........................................................................................................................9 7.1.No Test Performed...........................................................................................................................................................................9 8.1.1 General Information..............................................................................................................................10 8.1.Notes and Disclaimer.....................................................................................................................................................................10 8.2.References.....................................................................................................................................................................................10 8.3.General RF Exposure Test Exemptions............................................................................................................................................11 9.SAR Based Test Exemption.........................................................................................................................13 9.1.KDB 447498 D04 Interim General RF Exposure Guidance v01, section 2.1.3:....................................................................................13 9.1.1.Results....................................................................................................................................................................................15 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-9789-25-01-06_TR1-R01 Page 2 of 16 The test results of this test report relate exclusively to the test item specified in chapter “Test sample information”. cetecom advanced does not assume responsibility for any conclusions and generalizations drawn from the test results regarding other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of …

Text truncated - open the document above for the full version.

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, all test data presented in this report is only applicable to presented test sample. Shenzhen STS Test Services Co., Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] RADIO TEST REPORT Report No.: STS2306111W01 Issued for SIMCom Wireless Solutions Limited Building 3, No.289 Linhong Road, Shanghai, China Product Name: LTE/WCDMA/GSM/GNSS MODULE Brand: SIMCom Model Number: SIM7600G-H Series Model(s): SIM7600G-H miniPCIE FCC ID: 2AJYU-8PYA007 Test Standard: 47 CFR Part 2, 22, 24, 27 S T L A B S Page 2 of 44 Report No.: STS2306111W01 TEST RESULT CERTIFICATION Applicant’s Name ................... : SIMCom Wireless Solutions Limited Address .................................. : Building 3, No.289 Linhong Road, Shanghai, China Manufacturer’s Name ............. : SIMCom Wireless Solutions Limited Address .................................. : Building 3, No.289 Linhong Road, Shanghai, China Product Description Product Name ........................ : LTE/WCDMA/GSM/GNSS MODULE Brand ...................................... : SIMCom Model Number ........................ : SIM7600G-H Series Model(s) ...................... : SIM7600G-H miniPCIE Test Standards ....................... : 47 CFR Part 2, 22, 24, 27 Test Procedure ....................... : KDB 971168 D01 v03r01,ANSI C63.26( 2015) This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STS, this document may be altered or revised by STS, personal only, and shall be noted in the revision of the document.. Date of Test ................................ : Date of receipt of test item .......... : 16 June 2020 Date (s) of performance of tests . : 16 June 2020 ~ 12 July 2023 Date of Issue .............................. : 12 July 2023 Test Result .................................. : Pass Testing Engineer : (Chris Chen) Technical Manager : (Sean she) Authorized Signatory : (Bovey Yang) Page 3 of 44 Report No.: STS2306111W01 Table of Contents Page 1 INTRODUCTION 7 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2 PRODUCT INFORMATION 8 3 TEST CONFIGURATION OF EQUIPMENT UNDER TEST 10 4 MEASUREMENT INSTRUMENTS 11 5 TEST ITEMS 12 5.1 CONDUCTED OUTPUT POWER&TRANSMITTER RADIATED POWER 12 5.2 PEAK TO AVERAGE RATIO 18 5.3 OCCUPIED BANDWIDTH 19 5.4 FREQUENCY STABILITY 20 5.5 SPURIOUS EMISSIONS AT ANTENNA TERMINALS 26 5.6 BAND EDGE 27 5.7 FIELD STRENGTH OF SPURIOUS RADIATION MEASUREMENT 29 APPENDIX-PHOTOS OF TEST SETUP 44 Page 4 of 44 Report No.: STS2306111W01 Revision History Rev. Issue Date Report NO. Effect Page Contents 00 12 July 2023 STS2306111W01 ALL Initial Issue Page 5 of 44 Report No.: STS2306111W01 SUMMARY OF TEST RESULTS Test procedures according to the technical standards: The radiated emission testing was performed according to the procedures of KDB 971168 D01 v03r01 and ANSI C63.26( 2015) Test Description FCC Rules Band Test Limit Test Result Conducted Output Power 2.1046 / Reporting Only PASS Transmitter Radiated Power 22.913 B5 ERP < 7 Watt PASS 24.232(c) B2 EIRP < 2Watt 27.50(d) B4 EIRP < 1Watt Peak-to-Average Ratio 22.913(d) B5 < 13 dB PASS 24.232(d) B2 27.50 B4 Occupied Bandwidth 2.1049 / Reporting Only PASS Frequency Stability 2.1055 / < 2.5 ppm PASS 22.355 B5 24.235 B2 27.54 B4 Spurious Emission at Antenna Terminals 2.1051 / < 43+10log10(P[Watts]) PASS 22.917 B5 24.238(a) B2 27.53(h) B4 Band Edge 2.1051 / Please refer to standard PASS 22.917 B5 24.238(a) B2 27.53(h) B4 Page 6 of 44 Report No.: STS2306111W01 Field Strength of Spurious Radiation 2.1053 / < 43+10log10(P[Watts]) PASS 22.917 B5 24.238(a) B2 27.53(h) B4 Page 7 of 44 Report No.: STS2306111W01 1 INTRODUCTION 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The measurement uncertainties shown below were calculated in accordance with the requirements ofANSI C63.4-2014. All measurement uncertainty values are shown with a coverage factor of k = 2 toindicate a 95% level of confidence. The measurement data shown herein meets or exceeds the UCISPRmeasurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly tospecified limits to determine compliance. No. Item Uncertainty 1 RF output power, conducted ±1.197dB 2 Unwanted Emissions, conducted ±2.896dB 3 All emissions, radiated 9K-30MHz ±3.84dB 4 All emissions, radiated 30M-1GHz ±3.94dB 5 All emissions, radiated 1G-6GHz ±4.59dB 6 All emissions, radiated>6G ±5.22dB 7 Conducted Emission (9KHz-150KHz) ±2.14dB 8 Conducted Emission (150KHz-30MHz) ±2.54dB Page 8 of 44 Report No.: STS2306111W01 2 PRODUCT INFORMATION Product Name LTE/WCDMA/GSM/GNSS MODULE Brand SIMCom Model Number SIM7600G-H Series Model(s) SIM7600G-H miniPCIE Model Difference Only different in model name and appearance. Tx Frequency: GPRS/EDGE: 850: 824 MHz ~ 849MHz 1900: 1850 MHz ~ 1910MHz WCDMA: Band V: 824 MHz ~ 849 MHz Band II: 1850 MHz ~ 1910 MHz Band IV: 1710 MHz ~ 1755 MHz Rx Frequency: GPRS/EDGE: 850: 869 MHz ~ 894 MHz 1900: 1930 MHz ~ 1990MHz WCDMA: Band V: 869 MHz ~ 894 MHz Band II: 1930 MHz ~ 1990 MHz Band IV: 2110 MHz ~ 2155 MHz Max RF Output Power: GPRS850(1-Slot):34.02dBm, GPRS1900(1-Slot):30.94dBm GPRS850(2-Slot):32.19dBm, GPRS1900(2-Slot):27.10dBm GPRS850(3-Slot):30.61dBm, GPRS1900(3-Slot):25.21dBm GPRS850(…

Text truncated - open the document above for the full version.

TEST REPORT Test report no.: 1-9789-25-01-03_TR1-R03 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS). The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12047-01-00. ISED Testing Laboratory Recognized Listing Number: DE0001 FCC designation number: DE0002 LIXO 34 RUE GODOT DE MAUROY 75009 Paris / FRANCE Phone: +33 06 25 00 19 20 Contact: Igor Rajzbaum e-mail: [email protected] Manufacturer LIXO 34 RUE GODOT DE MAUROY 75009 Paris / FRANCE Test standard/s FCC - Title 47 CFR Part 22 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 22 - Public mobile services FCC - Title 47 CFR Part 24 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 24 - Personal communications services FCC - Title 47 CFR Part 27 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 27 - Miscellaneous wireless communications services For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: LIXO ATOM-LXCO-5 Model name: LIXO ATOM-LXCO-5 FCC ID: 2BSIGLXCO5 ISED certification number: 34637-LXCO5 Frequency Bands: LTE bands 2, 4, 5, 12, 13, 25, 26, 41, 66 Technology tested: LTE Antenna: Integrated antenna Power supply: 12.0 V to 24.0 V DC by power supply Temperature range: -20°C to +55°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Alexander Becker René Oelmann Lab Manager Lab Manager Regulatory Services Radio Regulatory Services Radio Test report no.: 1-9789-25-01-03_TR1-R03 © cetecom advanced GmbH Page 2 of 114 1 Table of contents 1 Table of contents .................................................................................................................................... 2 2 General information ................................................................................................................................ 4 2.1 Notes and disclaimer .................................................................................................................... 4 2.2 Application details ........................................................................................................................ 4 2.3 Test laboratories sub-contracted .................................................................................................. 4 3 Test standard/s, references and accreditations ....................................................................................... 5 4 Reporting statements of conformity – decision rule ................................................................................ 6 5 Test environment.................................................................................................................................... 7 6 Test item ................................................................................................................................................ 7 6.1 General description ...................................................................................................................... 7 6.2 Additional information .................................................................................................................. 7 7 Description of the test setup ................................................................................................................... 8 7.1 Shielded semi anechoic chamber .................................................................................................. 9 7.2 Shielded fully anechoic chamber ................................................................................................ 11 7.3 Radiated measurements > 18 GHz .............................................................................................. 13 7.4 Conducted measurements with peak power meter & spectrum analyzer ...................................... 14 8 Sequence of testing .............................................................................................................................. 15 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz .............................................................. 15 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz ............................................................. 16 8.3 Sequence of testing radiated spurious 1 GHz to 18 GHz .............................................................. 17 8.4 Sequence of testing radiated spurious above 18 GHz .................................................................. 18 9 Measurement uncertainty ..................................................................................................................... 19 10 Summary of measurement results LTE band 2; LTE band 25 .............................................................. 20 10.1 LTE – Band 2........................................................................................................................... 20 10.2 LTE – Band 25 ......................................................................................................................... 21 11 RF measurements LTE band 2 ........................................................................................................... 22 11.1 Description of test setup ......................................................................................................... 22 11.2 Results .................................................................…

Text truncated - open the document above for the full version.

Annex A103 - Photographs No. 1-9789-25-01-01_TR1-A103-R01 March 31, 2026 DescriptionTest setup photos This document is electronically signed and valid without handwritten signature. Public keys for verifcation of the electronic signatures can be requested at the testing laboratory. Michael Dorongovski Lab Man…

Text truncated - open the document above for the full version.