2BSIIHD-90-1DIGITAL TWO WAY RADIO

Digital Two Way Radio SkyConnex Communications Limited Instruction Manual 2 Attention Please read this instruction manual carefully before use. Please keep this manual, which contains important instructions on the use of Digital Trunking portable radio series. △ ! Battery Usage Precautions.  Do not disassemble or modify the battery. Batteries have internal protective circuitry, and disassembly or modification of the battery may cause damage to the protective circuitry, and the battery may smoke, rupture, or catch fire.  Do not short-circuit the battery. Do not use any metal to connect the "+" and "-" terminals of the battery, and do not place or store the battery in a container with a metal object. If the battery is short-circuited, excessive current will be drawn, and the battery will heat up, smoke, rupture, or catch fire.  Do not place the battery near a fire, furnace or other heater, and do not burn or heat the battery. Batteries may generate heat, smolder, rupture, or catch fire.  Do not expose the battery to rain, snow, seawater or any other liquids. Do not charge or use wet batteries. If the battery gets wet, be sure to dry it before use. △ ! Charger usage precautions.  Do not block the air vents of the charger, as this may cause damage to the internal parts and result in electric shock or disaster.  Do not allow the charger to get close to heat sinks or heat sources; do not put paper under the charger.  Do not place the charger in a closed container or on a bed, sofa or carpet.  Do not use the charger near bathtubs, pools, swimming pools or in wet basements.  Do not place metal sheets in the card holder, as these conductive materials may damage the unit.  Do not press the power supply strongly enough to bend or distort the pins.  Do not leave the charger exposed to dirt, dust, water or food.  Do not expose the charger to high temperatures or sunlight. 3 Content 1. Overview ....................................................................................................................... 1 1.1 product description ...................................................................................................... 1 1.1.1 Product use .......................................................................................................... 1 1.1.2 product composition ............................................................................................. 1 1.1.3 Main functions ...................................................................................................... 1 1.2 product profile ............................................................................................................. 2 1.2.1 Brief description of the appearance of the whole machine ................................... 2 1.2.2 Interface layout ..................................................................................................... 3 1.2.3 Status bar icon indication ..................................................................................... 4 1.2.4 Introduction to the keyboard ................................................................................. 4 2. Working mode................................................................. 2.1 Conventional mode................................................... 2.2 Trunking mode.......................................................... 3. Mounting and dismounting ............................................................................................ 4 3.1 Pre-installation inspection ........................................................................................... 4 3.2 Battery mounting and dismounting .............................................................................. 4 3.3 antenna mounting and dismounting ............................................................................ 5 3.4 Belt clip mounting and dismounting ............................................................................ 6 3.4.1 Standard belt clip mounting and dismounting............................. 3.4.2 Optional cradle clip mounting and dismounting 3.5 Accessories jack mounting and dismounting .............................................................. 7 4. Operating instructions .................................................................................................... 8 4.1 Basic operations ......................................................................................................... 8 4.1.1 Start-up operation ................................................................................................. 8 4.1.2 Power off operations ............................................................................................. 8 4.1.3 Volume adjustment ............................................................................................... 9 4.1.4 Channel/group switching............................ 4.2 Conventional mode voice calls .................................................................................... 9 4.2.1 PTT call ................................................................................................................ 9 4.2.2 Manual dialing calls .............................................................................................. 9 4.2.3 Contact person paging ....................................................................................... 10 4.2.4 Contact list................................................................ 4.3 Conventional mode MESSAGE communication ....................................................... 10 4.3.1 New MESSAGE.................................................................................................. 11 4.3.2 Status MESSAGE sending ................................................................................. 12 4.3.3 Sending Quick Text SMS 4.3.4 Text SMS reception 4.3.5 Inbox 4.3.6 Outbox 4.4 Zone selecting 4.5 Scanning Settings 4.5.1 Viewing a List 4.5.2 Setting an Effective List 4.6…

Text truncated - open the document above for the full version.

Report No.: AGC15733260101AP02 Page 1 of 5 EXTERNAL PHOTOS All View of EUT Top View of EUT UHF Antenna Report No.: AGC15733260101AP02 Page 2 of 5 Bottom View of EUT Front View of EUT Report No.: AGC15733260101AP02 Page 3 of 5 Back View of EUT Left View of EUT Report No.: AGC15733260101AP02 Page 4 of 5 Right View of EUT Port-1 View of EUT Report No.: AGC15733260101AP02 Page 5 of 5 Adapter View of EUT ****************************************End of Report*************************************

Report No.: AGC15733260101AP01 Page 1 of 2 TEST SETUP PHOTOS Radiated Emission Test Setup Below 1GHz Radiated Emission Test Setup Above 1GHz Report No.: AGC15733260101AP01 Page 2 of 2 Conducted Test Setup ****************************************End of Report*************************************

Report No.: AGC15733260101FR01 Page 39 of 60 B. Audio Frequency Response: Note: All the modes had been tested, but only the worst data recorded in the report. 12.5kHz, Analog modulation, Assigned Frequency:406.125MHz-4W Frequency (Hz) Deviation (kHz) Audio Frequency Response(dB) 100 -- -- 200 -- -- 300 0.24 -11.38 400 0.34 -8.36 500 0.41 -6.73 600 0.49 -5.18 700 0.54 -4.34 800 0.62 -3.14 900 0.71 -1.96 1000 0.89 0.00 1200 0.92 0.29 1400 1.15 2.23 1600 1.38 3.81 1800 1.43 4.12 2000 1.62 5.20 2400 1.72 5.72 2500 1.87 6.45 2800 2.27 8.13 3000 2.37 8.51 3200 2.52 9.04 3600 0.24 -11.38 4000 0.34 -8.36 4500 0.41 -6.73 5000 0.49 -5.18 5500 0.54 -4.34 6000 0.62 -3.14 6500 0.71 -1.96 7000 0.89 0.00 7500 0.92 0.29 Report No.: AGC15733260101FR01 Page 40 of 60 10. Maximum Transmitter Power 10.1 Provisions Applicable Per FCC §2.1046 and §90.205: Maximum ERP is dependent upon the station’s antenna HAAT and required service area. 10.2 Measurement Procedure The RF output of Two-way Radio was conducted to a spectrum analyzer through an appropriate attenuator. In the semi-anechoic chamber, setup as illustrated above the DUT placed on the 0.8m height of Turn Table, rotated the table 45 degree each interval to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1m to 4m to find the maximum polar radiated power for each degree interval. The “Read Value” is the spectrum reading of maximum power value. The substitution antenna is substituted for DUT at the same position and signals generator (S.G) export the CW signal to the substitution antenna via a TX cable. The receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1m to 4m to find the maximum radiation power. Record the power level of maximum radiation power from spectrum. So, the Measured substitution value = Ref level of S.G + TX cables loss – Substituted Antenna Gain. EIRP = “Read Value” + Measured substitution value + 2.15. 10.3 Measurement Setup Conducted Output Power: Report No.: AGC15733260101FR01 Page 41 of 60 Effective Radiated Power: Radiated Below 1GHz Radiated Above 1 GHz Report No.: AGC15733260101FR01 Page 42 of 60 10.4 Measurement Result Conducted Power Measurement Results Mode Channel Separation Test Channel Measurement Result (dBm) For 30.00dBm(1W) Analog +Voice 12.5 kHz Bottom(406.125MHz) 29.94 Middle(453.2125MHz) 29.78 Middle (458.2125MHz) 29.66 Top (469.975MHz) 29.77 Digital (Voice+Data) 12.5 kHz Bottom(406.125MHz) 29.94 Middle(453.2125MHz) 29.66 Middle (458.2125MHz) 29.53 Top (469.975MHz) 29.73 Conducted Power Measurement Results Mode Channel Separation Test Channel Measurement Result (dBm) For 36.02dBm(4W) Analog +Voice 12.5 kHz Bottom(406.125MHz) 35.73 Middle(453.2125MHz) 35.92 Middle (458.2125MHz) 35.91 Top (469.975MHz) 35.94 Digital (Voice+Data) 12.5 kHz Bottom(406.125MHz) 35.76 Middle(453.2125MHz) 35.80 Middle (458.2125MHz) 35.82 Top (469.975MHz) 35.91 Report No.: AGC15733260101FR01 Page 43 of 60 Radiated Power Measurement Results-1W Test Mode Frequency (MHz) Reading Level (dBuv/m) Antenna Polarization S.G. (dBm) Cable Loss (dB) Ant.Gain (dBi) ERP Results (dBm) Limit (dBm) Analog +Vioce 406.125 98.35 V 23.12 0.85 6.9 29.17 30.00 406.125 98.32 H 23.09 0.85 6.9 29.14 30.00 453.2125 98.39 V 23.16 0.85 6.9 29.21 30.00 453.2125 98.36 H 23.13 0.85 6.9 29.18 30.00 458.2125 98.42 V 23.19 0.85 6.9 29.24 30.00 458.2125 98.37 H 23.14 0.85 6.9 29.19 30.00 469.975 98.51 V 23.28 0.85 6.9 29.33 30.00 469.975 98.43 H 23.20 0.85 6.9 29.25 30.00 Digital (Voice+Data) 406.125 98.87 V 23.64 0.85 6.9 29.69 30.00 406.125 98.71 H 23.48 0.85 6.9 29.53 30.00 453.2125 98.65 V 23.42 0.85 6.9 29.47 30.00 453.2125 98.58 H 23.35 0.85 6.9 29.40 30.00 458.2125 98.47 V 23.24 0.85 6.9 29.29 30.00 458.2125 98.40 H 23.17 0.85 6.9 29.22 30.00 469.975 98.61 V 23.38 0.85 6.9 29.43 30.00 469.975 98.53 H 23.30 0.85 6.9 29.35 30.00 Report No.: AGC15733260101FR01 Page 44 of 60 Radiated Power Measurement Results-4W Test Mode Frequency (MHz) Reading Level (dBuv/m) Antenna Polarization S.G. (dBm) Cable Loss (dB) Ant.Gain (dBi) ERP Results (dBm) Limit (dBm) Analog +Vioce 406.125 104.63 V 29.40 0.85 6.9 35.45 36.02 406.125 104.56 H 29.33 0.85 6.9 35.38 36.02 453.2125 104.85 V 29.62 0.85 6.9 35.67 36.02 453.2125 104.73 H 29.50 0.85 6.9 35.55 36.02 458.2125 104.96 V 29.73 0.85 6.9 35.78 36.02 458.2125 104.95 H 29.72 0.85 6.9 35.77 36.02 469.975 104.79 V 29.56 0.85 6.9 35.61 36.02 469.975 104.68 H 29.45 0.85 6.9 35.50 36.02 Digital (Voice+Data) 406.125 104.58 V 29.35 0.85 6.9 35.40 36.02 406.125 104.54 H 29.31 0.85 6.9 35.36 36.02 453.2125 104.63 V 29.40 0.85 6.9 35.45 36.02 453.2125 104.57 H 29.34 0.85 6.9 35.39 36.02 458.2125 104.71 V 29.48 0.85 6.9 35.53 36.02 458.2125 104.64 H 29.41 0.85 6.9 35.46 36.02 469.975 104.81 V 29.58 0.85 6.9 35.63 36.02 469.975 104.74 H 29.51 0.85 6.9 35.56 36.02 Note: Calculation Formula: CP = R + A + L  CP: The final Conducted Power  R: The reading value from spectrum analyzer  A: The attenuation value of the used attenuator  L: The loss of all connection cables  Measurement Result=Peak Power (Max) Report No.: AGC15733260101FR01 Page 45 of 60 11. Spurious Emission on Antenna Port 11.1 Provisions Applicable Please refer to FCC 47 CFR 2.1051, 2.1057 & 90.210 for specification details. Emissions shall be attenuated below the mean output power of the transmitter as follows: FCC Rules Attenuation Limit (dBc) § 90.210 At least 50 + 10 log (P) dB 50 +10 log (Pwatts) Note: In general, the worse case attenuation requirement shown above was applied. Calculation: Limit (dBm) =EL-50-10log10 (TP) EL is the emission level of the Output Power expressed in dBm, In this application, the EL is P( dBm) Limit (dBm) = P( dBm)-50-10 log (Pwatts) = -20dBm 11.2 Measurement Procedure 1. The RF output of the EUT was connected to a spectrum analyzer through appropriate attenuation. 2. The resolution bandwidth of the spectrum analyzer was set to 100 kHz. S…

Text truncated - open the document above for the full version.

Page 1 of 60 FCC Test Report FCC ID : 2BSIIHD-90-1 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : DIGITAL TWO WAY RADIO BRAND NAME : MOHANTON , LISHENG , YSHON MODEL NAME : HD-91, Q8988, HD-90 APPLICANT : SkyConnex Communications Limited DATE OF ISSUE : Mar. 03, 2026 STANDARD(S) : FCC Part 90 Subpart I REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15733260101FR01 Report No.: AGC15733260101FR01 Page 2 of 60 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 03, 2026 Valid Initial Release Report No.: AGC15733260101FR01 Page 3 of 60 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 7 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 8 2.4 Test Methodology ...................................................................................................................................... 8 2.5 Calculation of Emission Indicators ............................................................................................................ 8 2.6 Special Accessories .................................................................................................................................. 8 2.7 Equipment Modifications ........................................................................................................................... 8 3. Test Environment ............................................................................................................................................ 9 3.1 Address of The Test Laboratory ................................................................................................................ 9 3.2 Test Facility ................................................................................................................................................ 9 3.3 Environmental Conditions ....................................................................................................................... 10 3.4 Measurement Uncertainty ....................................................................................................................... 10 3.5 List of Equipment Used ........................................................................................................................... 11 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ................................................................................................................................... 12 4.2 EUT Exercise ........................................................................................................................................... 12 4.3 Configuration of Tested System .............................................................................................................. 12 4.4 Equipment Used in Tested System ......................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................ 13 5. Description of Test Modes ........................................................................................................................... 14 6. Frequency Stability ....................................................................................................................................... 15 6.1 Provisions Applicable .............................................................................................................................. 15 6.2 Measurement Procedure ......................................................................................................................... 15 6.3 Measurement Setup ................................................................................................................................ 15 6.4 Measurement Result ............................................................................................................................... 16 7. 26dB Emission Bandwidth and 99% Occupied Bandwidth ...................................................................... 17 7.1 Provisions Applicable .............................................................................................................................. 17 7.2 Measurement Procedure ......................................................................................................................... 17 7.3 Measurement Setup ................................................................................................................................ 17 7.4 Measurement Result ............................................................................................................................... 18 8. Spurious Radiated Emission ......................................................................................................................... 22 8.1 Provisions Applicable .............................................................................................................................. 22 8.2 Measurement Procedure ..........................................................................…

Text truncated - open the document above for the full version.

Page 1 of 45 SAR Test Report Report No.: AGC15733260101FH01 FCC ID : 2BSIIHD-90-1 PRODUCT DESIGNATION : DIGITAL TWO WAY RADIO BRAND NAME : MOHANTON, LISHENG, YSHON MODEL NAME : HD-91, Q8988, HD-90 APPLICANT : SkyConnex Communications Limited DATE OF ISSUE : Feb. 03, 2026 STANDARD(S) : IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2019 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. Report No.: AGC15733260101FH01 Page 2 of 45 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Feb. 03, 2026 Valid Initial Release Report No.: AGC15733260101FH01 Page 3 of 45 Test Report Applicant Name SkyConnex Communications Limited Applicant Address Room 3601, 36/F Lippo Centre, Tower Two, 89 Queensway, Hong Kong Manufacturer Name Lisheng Communications Co., Ltd. Manufacturer Address 5#, Chongxiang St., Econ & Tech. Area, Quanzhou, Fujian, China Factory Name Lisheng Communications Co., Ltd. Factory Address 5#, Chongxiang St., Econ & Tech. Area, Quanzhou, Fujian, China Product Designation DIGITAL TWO WAY RADIO Brand Name MOHANTON, LISHENG, YSHON Test Model HD-91 Series Model Q8988, HD-90 Declaration of Difference Except for the model name and trademark, everything else is identical. EUT Voltage DC7.4 V Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2019 Date of receipt of test item Jan. 04, 2026 Test Date Jan. 14, 2026 Report Template AGCRT- US -PTT/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Prepared By Bibo Zhang (Project Engineer) Feb. 03, 2026 Reviewed By Jack Gui (Reviewer) Feb. 03, 2026 Approved By Angela Li (Authorized Officer) Feb. 03, 2026 Report No.: AGC15733260101FH01 Page 4 of 45 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ......................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................... 6 2.1. EUT DESCRIPTION......................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ........................................................................................................................ 7 3.1. THE DASY5 SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................... 7 3.2. DASY5 E-FIELD PROBE ................................................................................................................................. 8 3.3. DATA ACQUISITION ELECTRONICS DESCRIPTION ............................................................................................... 8 3.4. ROBOT .......................................................................................................................................................... 9 3.5. LIGHT BEAM UNIT .......................................................................................................................................... 9 3.6. DEVICE HOLDER .......................................................................................................................................... 10 3.7. MEASUREMENT SERVER ............................................................................................................................... 10 3.8. PHANTOM ................................................................................................................................................. 11 4. SAR MEASUREMENT PROCEDURE ............................................................................................................ 12 4.1. SPECIFIC ABSORPTION RATE (SAR) .............................................................................................................. 12 4.2. SAR MEASUREMENT PROCEDURE ................................................................................................................ 13 5. TISSUE SIMULATING LIQUID ....................................................................................................................... 15 5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID..................................................................................... 15 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS ............................................................... 15 5.3. TISSUE CALIBRATION RESULT ....................................................................................................................... 16 6. SAR SYSTEM CHECK PROCEDURE ........................................................................................................... 17 6.1. SAR SYSTEM CHECK PROCEDURES ............................................................................................................. 17 6.2. SAR SYSTEM CHECK ................................................................................................................................... 18 7. EUT TEST POSITION ...................................................................................................................................... 19 7.1. BODY WORN POSITION ................................................................................................................................ 19 8. SAR EXPOSURE LIMITS ............................................................................................................................... 20 9. TEST FACILITY .............................................................................................................................................. 21 10. TEST EQUIPMENT LIST .............................................................................................................................. 22 11. MEASUREMENT UNCERTAINTY ...............................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 18 CALIBRATION DATA PROBE CALIBRATION DATA Page 2 of 18 Page 3 of 18 Page 4 of 18 Page 5 of 18 Page 6 of 18 Page 7 of 18 Page 8 of 18 Page 9 of 18 Page 10 of 18 DAE CALIBRATION DATA Page 11 of 18 Page 12 of 18 Page 13 of 18 DIPOLE CALIBRATION DATA Page 14 of 18 Page 15 of 18 Page 16 of 18 Page 17 of 18 Page 18 of 18

Report No.: AGC15733260101AP02 Page 1 of 10 INTERNAL PHOTOS Open View-1 of EUT Open View-2 of EUT Report No.: AGC15733260101AP02 Page 2 of 10 Internal View-1 of EUT Internal View-2 of EUT Report No.: AGC15733260101AP02 Page 3 of 10 Internal View-3 of EUT Internal View-4 of EUT Report No.: AGC15733260101AP02 Page 4 of 10 Internal View-5 of EUT Internal View-6 of EUT Report No.: AGC15733260101AP02 Page 5 of 10 Internal View-7 of EUT Internal View-8 of EUT Report No.: AGC15733260101AP02 Page 6 of 10 Internal View-9 of EUT Internal View-10 of EUT Report No.: AGC15733260101AP02 Page 7 of 10 Internal View-11 of EUT Internal View-12 of EUT Report No.: AGC15733260101AP02 Page 8 of 10 Internal View-13 of EUT Internal View-14 of EUT Report No.: AGC15733260101AP02 Page 9 of 10 Internal View-15 of EUT Internal View-16 of EUT Report No.: AGC15733260101AP02 Page 10 of 10 Internal View-17 of EUT Internal View-18 of EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm*20mm FCC ID: 2BSIIHD-90-1

SkyConnex Communications Limited Room 3601, 36/F Lippo Centre, Tower Two, 89 Queensway, Hong Kong Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: March 9, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BSIIHD-90-1 SkyConnex Communications Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Name: Stone He Title: Manager

SkyConnex Communications Limited Room 3601, 36/F Lippo Centre, Tower Two, 89 Queensway, Hong Kong Date:2026-03-09 FCC Part 90 Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §90.203 FCC ID: 2BSIIHD-90-1 Dear Sir/Madam, We, SkyConnex Communications Limited, acknowledge that this device will not be marketed to USA users with the frequency band which is not allowed by rule part 90.and it is a violation of FCC rules if this device is operated on unauthorized frequencies inside the U.S.A. This equipment meets the requirements of the FCC Rules, Parts 90.203(e) and (g), as applicable. Programming of this products transmit frequencies can be performed ONLY by the manufacturer or by service or by maintenance personal. The operator can’t program transmit frequencies using the equipment’s external operation controls. This is to certify that the requirements of 47 CFR Part 90.203(j)(4) and (5) spectrum efficiency are met by the SkyConnex Communications Limited demonstrated by the tests conducted on the sample radio provided. The tests show that the 4FSK data rate is in accordance with ETSI TS 102 361-1, that is 9600 bits per second in a 12.5 kHz bandwidth to satisfy the data rate requirement of 4800 bits per second per 6.25 kHz of channel bandwidth (7K60F1D emissions). Additionally, the radio uses the AMBE+2 half-rate vocoder to compress 60ms of normal bursts are sent in alternate 30ms TDMA slots and so comply with the equivalence of one voice channel per 6.25 kHz bandwidth (7K60F1W emission). Additionally, the radio also meets the requirement of one voice channel per 12.5 kHz of channel bandwidth for analogue speech (11k0F3E emission). Sincerely Yours, Signature: Name: Stone He Title: Manager

SkyConnex Communications Limited Room 3601, 36/F Lippo Centre, Tower Two, 89 Queensway, Hong Kong Date: 2026-03-09 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transmitter FCC ID: 2BSIIHD-90-1 Dear Sir/Madam, This transmitter was designed to operate in following frequency ranges 400-470Mhz To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, SkyConnex Communications Limited is requesting that the FCC lists the frequencies 400-470MHz, under FCC Rule Parts 90 on the FCC Grant. SkyConnex Communications Limited attests that the Digital TWO WAY RADIO will not be marketed to USA users with the frequency band which is not allowed by the rule part 90. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this devi…

Text truncated - open the document above for the full version.