2BSMI-PB1Wireless power bank

parameter 1. Chargethe battery Connectthe power adapterto the Type-Cport of the charger, and then connectthe power adapterto the power outlet. 2. Charge your phone ① Adapted to iPhone 12/13/14/15/16/17 (with or without MagSafe case) Charging can be done from the back with a maximum power of 7.5W. Note: There is no need to press the power button.As long as you attach the charger,the chargerwill automaticallychargethe phone.When you take the chargeraway from the phone,the chargingwill be automaticallydisconnected. Product Name: Wireless Power Bank Model: PB1 Lithium Battery Capacity:3000mAh/3.85V/11 5Wh Rated Capacity:3000mAh(5V==2A) USB-C Input: 5V==3A/ 9V==2.22A USB-C + Wireless Charging Output:10W + 15W Max Wireless Charging Output : 5W 7.5W Warning: Donot useafterget tingwet ! DongguanInnosmart Electronics Co., Ltd. Made in China FCCWARNING ThisdevicecompIieswithpart15oftheFCCRuIes. Operationis subject tothefoIIowingtwo conditions: (1) this device may not cause harmfuI interference, and(2) this devicemust acceptanyinterferencereceived, incIuding interference that may causeundesired operation. Any changes or modifications not expressIy appro- vedby thepartyresponsibIe for compIiance couId void the userIs authority to operate the equipment. NOTE: Thisequipmenthasbeentestedandfound to compIywiththeIimitsforaCIassBdigitaI device, pursuant toPart 15of theFCCRuIes. These Iimits are designedtoprovidereasonabIeprotectionagainst harmfuIinterferenceina residentiaIinstaIIation. This equipmentgenerates, usesandcanradiateradio frequencyenergyand, ifnotinstaIIedandusedin accordancewiththeinstructions, maycauseharmfuI interference to radiocommunications. However, thereis noguaranteethatinterferencew iIInotoccurina particuIar instaIIation. If this equipment does causeharmfuI interferenceto radio or teIevision reception, which can be determinedby turning the equipment off andon, theuser is encouragedto try tocorrect theinterferencebyoneormoreof the foIIowingmeasures: -- Reorient or reIocate the receiving antenna. --Increasetheseparationbetweenthe equipment andreceiver. -- Connect the equipment intoanoutIet ona circuit different fromthat to whi ch the receiver is connected. --ConsuItthedeaIeroranexperiencedradio/TV technician for heIp. FCCRF RadiationExposure Statement ThisequipmentcompIieswithFCCRFradiation exposureIimits set forth for an uncontroIIed environ - ment. Thisdeviceanditsantennamust notbeco- Iocatedoroperatinginconjunction withanyother antennaortransmitter. “TocompIy withFCCRF exposure compIiance requirements, this grant is appIi - cabIe to onIy MobiIe Configuratio ns. The antennas used forthistransmittermustbeinstaIIedtoprovidea separationdistance of at Ieast 20cmfromaII persons andmust not be co-Iocated or operating in conjunction with any other antenna or transmitter.” CarryLighter,LiveNow. FCCID: ICID: 3000mAhmagneticcharging bank pay attentionto： Do not put the batteryor equipmentnear heat sourceor exposedfire source, such as electricheater,microwaveoven, oven, hot water heater,stove, candle or other placesthat may producehigh temperature,otherwiseit may cause equipmentfailure,fire or explosion; Puttingthe batterypack into fire or heatingfurnace,or mechanical compressionor cuttingof the batterypack may lead to explosion; If consumersuse a power adapterto charge,they shouldpurchasea matching power adapterthat is CCC certifiedand meets the standardrequirements. explain： ①Type-Cinterfacefor input and output. ②The mobilepowersupplyhas built-insafety protectionmechanisms,including overvoltageand overcurrentprotectionmechanism,overchargeprotectionmechanism, short circuitprotectionmechanism,overtemperatureprotectionmechanism,overdisc- harge protectionmechanismand electromagneticshieldingprotectionmechanism. 3. Buttonsand Indicators Press the power button of the portablepower supply,and the indicatorlight will be on to show the currentpower. ②Alternatively,you can use a chargingcable to connectthe TypeCport of the batterybank and the phone for wired charging,with a maximumchargingpower of 20W.

Dongguan Innosmart Electronics Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: 10-11-2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BSMI-PB1 Dongguan Innosmart Electronics Co., Ltd. certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Dongguan Innosmart Electronics Co., Ltd. FRN: 0037555042 Address: Room 401, Building 2, No. 9 Heshun Road, Shatou Community, Chang'an Town, Dongguan City, GuangDong province, China Signature: Contact Person: Peng Fu Tel: 13649898165 Email: [email protected]

Rev 1/26/2023 (Dongguan Innosmart Electronics Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 11, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BSMI-PB1 [Dongguan Innosmart Electronics Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Dongguan Innosmart Electronics Co., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, By: Peng Fu Rev 1/26/2023 (Dongguan Innosmart Electronics Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 11, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BSMI-PB1 [Dongguan Innosmart Electronics Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, By: Peng Fu

深 圳 市 深 广 电 子 有 限 公 司 Shenzhen Shenguang Electronic Technology Co.,LTD 客戶： CUSTOMER: 客 戶 料 號： CUST P/N: 名 称： NAMA P/N: 産 品 型 號： DESC: 日期： DATE: 版本： Version: 05A5/05B7 6.5UH/ G42.5*0.5 0.08*24P*2P*11TS 3mm 2024.05.15 A.0 擬制 PREPAREDBY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMERAPPROVE Shenzhen Shenguang Electronic Technology Co.,LTD Wireless charging transmitting coil Acknowledgment 深 圳 市 深 广 电 子 有 限 公 司 ShenzhenShenguangElectronicTechnologyCo.,LTD VersionChangeHistory 版本 Rev. 變更前 BeforeChang 變更後 After Change 更 改 日 期 ChangeDate 批准 ApprovedBy A.0 new issue ---- 202 40515 Xie Xiaozai 深 圳 市 深 广 电 子 有 限 公 司 ShenzhenShenguangElectronicTechnologyCo.,LTD 産 品 型 號： DESC 6.5 UH /G42.5*0.5 版本 Rev：A.0 客戶CUST : 客户料号CUSTP/N: 05A5/05B7 一、尺寸DIMENSION:( mm ) 二、原理图SCHEMATICDIAGRAM: A 42.5±0.5 B 38 ±0.5 C 16 ±0.5 H 48±2 E 2-5 I 0.5 ±0.05 T 1. 5Max 三、绕线参数WindingSpecification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 WindingDirection 1SF 0.08*48P 11TsCCW 四、电气特性ELECTRICALCHARACTERISTICS: 温度TEMPERATURE:25 ±10 °C,湿度RELATIVEHUMIDITY:65 ±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND .S-F 3.8 u H ±10%单独线圈 100 KHz /1.0V CH 1063 2IND .S-F 6.5uH ±10%加磁片 100 KHz /1.0VCH 1063 3DCRS-F 85mΩMAX 100 KHz /1.0V502BC 4 Q S-F30MIN100 KHz /1.0V502BC 擬制/日期PREPAREDBY/DATE審核/日期CHECKEDBY/DATE 2024- 8-152024- 8-15 Adhesive backing and hand-tear position 深圳市深广电子有限公司 ShenzhenShenguangElectronicTechnologyCo.,LTD 五、包装/PACKAGE 5.3包装以现有包装盘为参照标准，以实际出货包装为准，如有特需要求可以定制。 Thepackagingshallbebasedontheexustingpackingplateandtheactualdeliverypackageshall prevail.Ifthereisanyrequirement,wecancustomizeit. 六、贮存和使用条件StorageandUsecondition 6.1贮存条件Storagecondition 6.1.1建议贮存条件：温度-25°C~85°C，湿度70%(Max.) Recommendedkeepingconditions:-25°C ~ 85°C,70%RH(Max.) 6.1.2贮存期限：自生产之日起六个月内 Storagelife:Withinthelimitsofsixmonthsfrombeingproduced. 6.2使用条件Usecondition 使用条件限制：温度=-25°C ~ 85°C,湿度≤90% Useconditionlimit:T=-25°C~85°C,RH≤90%.

Dongguan Innosmart Electronics Co., Ltd. Date：October 11, 2025 Product Model Number: PB1 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Peng Fu Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 13649898165 On behalf of: Dongguan Innosmart Electronics Co., Ltd.

Dongguan Innosmart Electronics Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 13, 2025 Subject; Request for Confidentiality FCC ID: 2BSMI-PB1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Peng Fu Title: Manager

Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report Annex A. EUT External Photos Model: PB1 EUT View 1 EUT View 2 Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report EUT View 7 EUT View 8

Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report Annex B. EUT Internal Photos Model: PB1 EUT Internal View 1 EUT Internal View 2 Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Coil ANT1 Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report EUT Internal View 5

Report No: SSP25090187-2E MPE Test Report Page 1 of 14 MPE Test Report FCC ID: 2BSMI-PB1 Report No. : SSP25090187-2E Applicant : Dongguan Innosmart Electronics Co., Ltd. Product Name : Wireless power bank Model Name : PB1 Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2025-09-28 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090187-2E MPE Test Report Page 2 of 14 Test Report Basic Information Applicant..................................: Dongguan Innosmart Electronics Co., Ltd. Address of Applicant...............: Room 401, Building 2, No. 9 Heshun Road, Shatou Community, Chang'an Town, Dongguan City, GuangDong province Manufacturer..........................: Dongguan Innosmart Electronics Co., Ltd. Address of Manufacturer........: Room 401, Building 2, No. 9 Heshun Road, Shatou Community, Chang'an Town, Dongguan City, GuangDong province Product Name.........................: Wireless power bank Brand Name.............................: - Main Model..............................: PB1 Series Models..........................: - Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2025-09-13 to 2025-09-22 Test Result...............................: PASS Tested By ................................: (Leonis Cai) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090187-2E MPE Test Report Page 3 of 14 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................7 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Setup Block Diagram ......................................................................................................................................9 2.4 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 12 Report No: SSP25090187-2E MPE Test Report Page 4 of 14 Revision History Revision Issue Date Description Revised By V1.0 2025-09-28 Initial Release Lahm Peng Report No: SSP25090187-2E MPE Test Report Page 5 of 14 1. General Information 1.1 Product Information Product Name: Wireless power bank Trade Name: - Test Model: PB1 Series Models: - Rated Voltage: Type-C Input: 5V⎓2A Type-C Output: 5V⎓2A Wireless Output: 5W, 7.5W Battery: 3.85V 3000mAh, 11.55Wh Test Sample No: SSP25090187-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: Wireless charging Output :110.5kHz-205kHz Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Modular Device Report No: SSP25090187-2E MPE Test Report Page 6 of 14 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 5W+adapter charging - TM2 Wireless charging 7.5W - TM3 Wireless charging 5W - Note 1: All modes above have been tested and only the worst modes: TM2, data are represented in the report. Note 2: The adapter charging mode only supports 5W output. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite USB cable 100 Unshielded Without Ferrite - - - - List and Details of Auxiliary Equipment Description Manufacturer Model Serial Number Adapter XIAOMI MDY-14-EU HC78E2N6A23645 Phone iPhone iPhone 12pro - Report No: SSP25090187-2E MPE Test Report Page 7 of 14 1.3 Test Facilities Laboratory Name: Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China CNAS Laboratory No.: L18863…

Text truncated - open the document above for the full version.

Report No: SSP25090187-1E FCC Test Report Page 1 of 27 FCC TEST REPORT FCC ID: 2BSMI-PB1 Report No. : SSP25090187-1E Applicant : Dongguan Innosmart Electronics Co., Ltd. Product Name : Wireless power bank Model Name : PB1 Test Standard : FCC Part 15 Subpart C Date of Issue : 2025-09-28 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090187-1E FCC Test Report Page 2 of 27 Test Report Basic Information Applicant..................................: Dongguan Innosmart Electronics Co., Ltd. Address of Applicant...............: Room 401, Building 2, No. 9 Heshun Road, Shatou Community, Chang'an Town, Dongguan City, GuangDong province, China Manufacturer..........................: Dongguan Innosmart Electronics Co., Ltd. Address of Manufacturer........: Room 401, Building 2, No. 9 Heshun Road, Shatou Community, Chang'an Town, Dongguan City, GuangDong province, China Product Name.........................: Wireless power bank Brand Name.............................: - Main Model..............................: PB1 Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 + Cor:1-2023 Date of Test .............................: 2025-09-13 to 2025-09-22 Test Result...............................: PASS Tested By ................................: (Leonis Cai) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090187-1E FCC Test Report Page 3 of 27 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 26 6.1 Standard and Limit.............................................................................................................................................. 26 6.2 Test Procedure.................................................................................................................................................... 26 6.3 Test Data and Results ..................................................................................................................…

Text truncated - open the document above for the full version.

Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report Radiated Emission Test View 3 Report No: SSP25090187-1E FCC ID: 2BSMI-PB1 Annex of Test Report