2BSO2WBTCACDC10NACS AC/DC Charging Connector

NACS AC/DC Charging connector 1.0 NACS Charging connector Designed for home, workplace. Workersbee is an enterprise engaged in the R&D, design, manufacturing and sales of electric vehicle charging components (charging plugs, charging sockets,vehicle chargers, etc.). Features Manually trigger the one-button open lid radio frequency button Certified Compliance to Standards UL 2251:2017, 4th Ed. and SAE J3400 Safety, with smart temperature control for effective protection ,sealed with thermal conductive epoxy. Fire Resistant Compliance to UL94 V-0 Customized design available for ODM Configurable to meet special requirements Anti Rolling Compliance to UL2251/UL2263 Anti-drop: 1m, 200drops High reliability, silver plated contacts for long-life durability Effortless use, lightweight, high-flexible cable. warning: 1.Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Applicant_Declaration: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Technical Data ProductNACS AC/DC CHARGING CONNECTOR Specification Abstract Rated Voltage240VAC/1000VDC Rateud CurrentAC 16A, 32A, 40A, 48A,50A,80A / DC 40A, 50A,60A, 80A Cable Length2.6m, 5.5m, 7.3m Number of Mating Cycles10,000 cycles Mechanical Specification Plug Mating Force<100N Cooling MethodNatural Cooling Installation MethodRiveting Connector Environmental Work Temperature-40°C to +50°C Fire ResistantIEC 60332-1-2/UL94 V-0 IP GradeIP 67 (housing), IP 54 (plugged in) RoHS CompliantYes Additional Temperature SensorsMeasure and control temperature WarrantyTwo years, 10,000 times, whichever comes first UHF electric parameter voltage rangeDC5V--DC12V current range＜30mA operating frequency315MHz Power＜0.15W Reliability & Certification Design Life10,000 cycles Anti-rollingPer UL2263 Tension StrengthPer SAE J3400 Safety Standard "IEC 62196-1 socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 1: General requirements SAE J3400 SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler North American Charging Standard TS-0023666 North American Charging Standard AC/DC Pin Sharing Appendix"

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Jiangsu Yihang Electric Science and Technology Co., Ltd Address 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu, China FRN 0037589561 Grantee Code 2BSO2 FCC ID: 2BSO2WBTCACDC10 Authorized Contact Name gen wang Liu Contact Phone 0510-68590018 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2025-12-11 Print Name: gen wang Liu Title: Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Jiangsu Yihang Electric Science and Technology Co., Ltd Address 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu, China FRN 0037589561 Grantee Code 2BSO2 FCC ID: 2BSO2WBTCACDC10 Authorized Contact Name gen wang Liu Contact Phone 0510-68590018 Contact Email [email protected] Jiangsu Yihang Electric Science and Technology Co., Ltd (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. Link to the Covered List: Covered List Applicant Signature: Date: 2025-12-11 Print Name: gen wang Liu Title: Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Jiangsu Yihang Electric Science and Technology Co., Ltd U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: United Consulting Technology Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY City/Province/Zip: CA 91748 Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicantnoted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): David Wu/ CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion ofany Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Jiangsu Yihang Electric Science and Technology Co., Ltd Grantee Code: 2BSO2 FRN: 0037589561 FCC ID: 2BSO2WBTCACDC10 Contact Name: gen wang Liu Street Address: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng City/Province/Zip: Suzhou, Jiangsu, China, 215143 Telephone No: 0510-68590018 Email: [email protected] Applicant Signature: Date: 12/11/2025 Signed by (Printed Name/Title): gen wang Liu, Engineer

Jiangsu Yihang Electric Science and Technology Co.,Ltd Current Date 2025-09-19 To: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE Jiangsu Yihang Electric Science and Technology Co.,Ltd HEREBY DECLARED THAT Our product: Product Description: NACS AC/DC Charging Connector Model No.: WB-TC-AC1.0,WB-TC-DC1.0 Manufacturer’s Name: Jiangsu Yihang Electric Science and Technology Co.,Ltd Manufacturer’s Address: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu,China *Except that the below deviation, are identical with the original product as follow : Model Number and/or Trade Name and/or Appearance Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No.: WB-TC-AC1.0 Manufacturer’s Name: Jiangsu Yihang Electric Science and Technology Co.,Ltd Manufacturer’s Address: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu,China Sincerely, Signature & Stamp:

< Jiangsu Yihang Electric Science and Technology Co., Ltd > Date: 2025-12-11 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2BSO2WBTCACDC10 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Jiangsu Yihang Electric Science and Technology Co., Ltd This authorization is valid until further written notice from the applicant. Name (Printed): gen wang Liu Title: Engineer Signature: On behalf of Company: Jiangsu Yihang Electric Science and Technology Co., Ltd Telephone: 0510-68590018

Jiangsu Yihang Electric Science and Technology Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Jiangsu Yihang Electric Science and Technology Co., Ltd 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu, China Regarding: Confidentiality Request regarding application for FCC ID: 2BSO2WBTCACDC10 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): gen wang Liu Title: Engineer Company Name: Jiangsu Yihang Electric Science and Technology Co., Ltd

Compliance Certification Services (Kunshan) Inc. Page: 1 of 3 External Photos for KSEM2509002838EV Test Model No.: WB-TC-AC1.0 Compliance Certification Services (Kunshan) Inc. Page: 2 of 3 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 3

镭射信息 Laser information Name:EV Connector TYPE:WB-TC-DC1.0- 40A SPEC: 40A /1000VDC Type 3S OTR:-40 °C～ 50 °C XX XX XX XXXX 左 left 右 right Name:EV connector TYPE:WB-TC-DC1.0- 40 A SPEC: 40 A/1000VDC Type 3S OTR:-40 °C～ 50 °C XX XX XX XXXX 年 月 日 流水号 Year Month Date serial number CAUTION-Do not use this product if there is any damage to the EV cable or the connector; ATTENTION - N'utilisez pas ce produit si le câble EV ou le connecteur est endommagé; CAUTION-Do not use this product if there is any damage to the EV cable or the connector; ATTENTION - N'utilisez pas ce produit si le câble EV ou le connecteur est endommagé; 下 bottom This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 30 18 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID ： 2BSO2WBTCACDC10

Compliance Certification Services (Kunshan) Inc. Page: 1 of 4 Internal Photos for KSEM2509002838EV Test Model No.: WB-TC-AC1.0 Compliance Certification Services (Kunshan) Inc. Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Page: 4 of 4

Report No.: KSCR250900283803 Page: 1 of 9 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2509002838AT FCC ID: 2BSO2WBTCACDC10 Applicant: Jiangsu Yihang Electric Science and Technology Co.,Ltd Address of Applicant: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu,China Manufacturer: Jiangsu Yihang Electric Science and Technology Co.,Ltd Address of Manufacturer: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu,China Factory: Jiangsu Yihang Electric Science and Technology Co.,Ltd Address of Factory: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu,China Equipment Under Test (EUT): EUT Name: NACS AC/DC Charging Connector Model No.: WB-TC-AC1.0,WB-TC-DC1.0 Trade Mark: Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-09-30 Date of Test: 2025-11-27 to 2025-11-28 Date of Issue: 2025-11-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR250900283803 Page: 2 of 9 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2025-11-28 / Authorized for issue by: Tested By Damon_Zhou/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR250900283803 Page: 3 of 9 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Contents Page 1 Cover Page .................................................................................................................................. 1 2 Contents ...................................................................................................................................... 3 3 General Information..................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................ 4 3.2 Details of E.U.T. .................................................................................................................... 4 3.3 Test Location ........................................................................................................................ 5 3.4 Test Facility ........................................................................................................................... 5 4 FCC Radiofrequency radiation exposure limits ......................................................................... 6 4.1 Blanket 1 mW Blanket Exemption .......................................................................................... 6 4.2 MPE-based Exemption .......................................................................................................... 6 4.3 SAR-based Exemption .......................................................................................................... 7 5 Measurement and Calculation .................................................................................................... 9 5.1 Maximum transmit power ...................................................................................................... 9 5.2 RF Exposure Calculation ....................................................................................................... 9 Report No.: KSCR250900283803 Page: 4 of 9 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 General Information 3.1 General Description of E.U.T. Power supply: DC 5-12V Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Operation Frequency: 315MHz Antenna Type: Monopole antenna Modulation Type: ASK Number of Channels: 1 Transmitter type: Manually Report No.: KSCR250900283803 Page: 5 of 9 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.3 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g., max. internal working frequency, antenna gain, cable loss, etc) is provided by the applicant. (If applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (If applicable). 3. Sample source: sent by customer. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Laboratory Accreditation (A2LA). Certificate No. 2541.01. • FCC Compliance Certification Services (Kunshan) Inc. has been recognized as an accredited testing laboratory. Designation Number: CN1172. • ISED Compliance Certification Services (Kunshan) Inc. has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. Company Number: 2324E • VCCI The 3m and 10m Semi-anechoic chamber and Shielded Room of Compliance Certification Services (Kunshan) Inc. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-20134, R-11600, C-11707, T-11499, G-10216 respectively. Report No.: KSCR250900283803 Page: 6 of 9 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 4 FCC Radiofrequency radiation exposure limits Test exemptions apply for devices used in general population/uncontrolled exposure environments, according to the SAR-based, or MPE-based exemption thresholds. 4.1 Blanket 1 mW Blanket Exemption The 1 mW Blanket Exemption of §1.1307(b)(3)(i)(A) applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power of no more than 1 mW, regardless of separation distance. The 1-mW blanket exemption applies at separation distances less than 0.5 cm, including where there is no separation. This exemption shall not be used in conjunction wi…

Text truncated - open the document above for the full version.

Justification statement for Antenna To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BSO2WBTCACDC10 Dear Sir/Madam, Only radiated measurements are used for EUT with FCC ID: 2BSO2WBTCACDC10 to show compliance with FCC limits for fundamental and spurious emissions. All measurements were performed radiated and therefore additional antenna gain documentation is not required. The detailed information for antenna as below shows: Design Specifications Typical Antenna Type PCB Antenna Working Frequency 315 MHz Overall Dimensions Refer to below picture

Report No.: KSEM250900283802 Page: 1 of 25 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 TEST REPORT Application No.: KSEM2509002838EV FCC ID: 2BSO2WBTCACDC10 Applicant: Jiangsu Yihang Electric Science and Technology Co.,Ltd Address of Applicant: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu,China Manufacturer: Jiangsu Yihang Electric Science and Technology Co.,Ltd Address of Manufacturer: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu,China Factory: Jiangsu Yihang Electric Science and Technology Co.,Ltd Address of Factory: 538 Fangqiao Road, Caohu Sub-district, Xiangcheng, Suzhou, Jiangsu,China Equipment Under Test (EUT): EUT Name: NACS AC/DC Charging Connector Model No.: WB-TC-AC1.0,WB-TC-DC1.0   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2025-09-30 Date of Test: 2025-11-27 to 2025-11-28 Date of Issue: 2025-11-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSEM250900283802 Page: 2 of 25 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2025-11-28 / Authorized for issue by: Tested By Damon_Zhou/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSEM250900283802 Page: 3 of 25 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.231 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions above 1GHz 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2020) Section 6.6 47 CFR Part 15C Section 15.231(b) and 15.209 Pass Field Strength of the Fundamental Signal (15.231(b)) ANSI C63.10 (2020) Section 6.5 47 CFR Part 15, Subpart C 15.231(b) Pass Radiated Emissions below 1GHz ANSI C63.10 (2020) Section 6.4&6.5 47 CFR Part 15C Section 15.231(b) and 15.209 Pass Dwell Time (15.231(a1)) ANSI C63.10 (2020) Section 7.4 47 CFR Part 15, Subpart C 15.231(a1) Pass 20dB Bandwidth ANSI C63.10 (2020) Section 6.9.2 47 CFR Part 15, Subpart C 15.231(c) Pass Declaration of EUT Family Grouping: Note: There are series models mentioned in this report, and they are identical in electrical and electronic characters. Only the model WB-TC-AC1.0 was tested since their differences were the model number trade mark and appearance. Report No.: KSEM250900283802 Page: 4 of 25 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 Test Summary .................................................................................................................................... 3 3 Contents ............................................................................................................................................ 4 4 General Information........................................................................................................................... 5 4.1 Details of E.U.T. .......................................................................................................................... 5 4.2 Description of Support Units ........................................................................................................ 5 4.3 Measurement Uncertainty ........................................................................................................... 5 4.4 Test Location .............................................................................................................................. 6 4.5 Test Facility ................................................................................................................................. 6 4.6 Deviation from Standards ............................................................................................................ 6 4.7 Abnormalities from Standard Conditions ...................................................................................... 6 5 Equipment List .................................................................................................................................. 7 6 Radio Spectrum Technical Requirement .......................................................................................... 8 6.1 Antenna Requirement ................................................................................................................. 8 7 Radio Spectrum Matter Test Results ................................................................................................ 9 7.1 Radiated Emissions above 1GHz ................................................................................................ 9 7.2 Field Strength of the Fundamental Signal (15.231(b)) .................................................................12 7.3 Radiated Emissions below 1GHz ................................................................................................14 7.4 Dwell Time (15.231(a1)) .............................................................................................................16 7.5 20dB Bandwidth .........................................................................................................................17 8 Test Setup Photo ..............................................................................................................................18 9 EUT Constructional Details (EUT Photos) .......................................................................................18 10 Appendix ...........................................................................................................................................19 Report No.: KSEM250900283802 Page: 5 of 25 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 4 General Information 4.1 Deta…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 2 Appendix Photographs of Test Setup for KSEM2509002838EV Test Model No.: WB-TC-AC1.0 Compliance Certification Services (Kunshan) Inc. Page: 2 of 2 Test Setup Photo Radiated Emissions below 1GHz Radiated Emissions above 1GHz