2BSPP-WI002102-in-1 Wireless Charger

2-in-1 Wireless Charger Product Manual Model Numbers: WI00210 FCC ID: 2BSPP-WI00210 Specifications Input: DC 5V/3A, DC 9V/2.22A, DC 12V/1.67A Wireless Output (Phone): 5W, 7.5W, 10W, 15W (Max) Wireless Output (AirPods): 5W (Max) Charging Tips To begin charging, simply center your device on the puck and allow it to snap into optimal charging position. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator and your body: Use only the supplied antenna.

Rev 1/26/2023 Dongguan Haoyu Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 21, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BSPP-WI00210 [Dongguan Haoyu Technology Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Dongguan Haoyu Technology Co., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Guo Liang Wu Rev 1/26/2023 Dongguan Haoyu Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Oct. 27, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BSPP-WI00210 [Dongguan Haoyu Technology Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Guo Liang Wu

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofDongguanHaoyuTechnologyCo.,Ltd. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:DongguanHaoyuTechnologyCo.,Ltd. ProductDescription:2-in-1WirelessCharger FRN:0037611035 GranteeCode:2BSPP FCCID:2BSPP-WI00210 ContactName:GuoLiangWu Address:Room501,Building2,KeruixinScienceandTechnologyPark,No.76DashaRoad, DalingshanTown,DongguanCity TelephoneNo:13760251168 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2025/11/26 Applicant’sName: DongguanHaoyuTechnologyCo.,Ltd. USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:GeneralManagerTitle:Manager SignatureSignature

Dongguan Haoyu Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 21, 2025 Subject; Request for Confidentiality FCC ID: 2BSPP-WI00210 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Guo Liang Wu Title: General Manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Dongguan Haoyu Technology Co., Ltd. Date: Nov. 21, 2025 Product Model Number: WI00210 FCC ID: 2BSPP-WI00210 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: General Manager Email: [email protected] Telephone: 13760251168 On behalf of: Dongguan Haoyu Technology Co., Ltd.

SPECIFICATION FOR APPROVAL CUSTOMER: Shenzhen Jiayucang Technology Co., Ltd. 25.21272-1 Y- 2521272 CUST P/N: YUYAOP/N: 20.5 * 0.08 * 24P * 10TS - 6.5UH - 25mm + Lead wire sleeve tube 20MM / 43.5 * 0.8 double slot D E S T: DATE: 2025.2.22 VERSION: V1 PREPARED BY CHECKED BYAPPROVED BYCUSTOMER APPROVE Zheng Shaodong Yao Zhendong Cao Qiancheng Version Change History Rev Before Change After ChangeChange DateApproved By A.0 new issue 2025.2.22 SPECIFICATION APPROVAL D E S T: 20.5 * 0.08 * 24P * 10TS - 6.5UH - 25mm + Lead wire sleeve tube 20MM / 43.5 * 0.8 double slot VE RSION: V0 CUSTOMER: Shenzhen Jiayucang Technology Co., Ltd. CUST P/N: 25.21272-1 Y-252127 YUYAOP/N: 2 一、DIMENSION:(mm)A 5.3±0.5 B 43.5±0.5 C 20.5±0.5 D 39.5±1 E 25-1/+2.5 F 3±1.5 G 0.8±0.1 H 2.5 Max I J K L Note: Two wires exit from the same slot. PREPARED BY/DATECHECKED BY/DATE Zheng Shaodong 202 5.2.22 Yao Zhendong 2025.2.22 SPECIFICATION APPROVAL D E S T: 20.5 * 0.08 * 24P * 10TS - 6.5UH - 25mm + Lead wire sleeve tube 20MM / 43.5 * 0.8 double slot VE RSION: V0 CUSTOMER: Shenzhen Jiayucang Technology Co., Ltd. CUST P/N: 25.21272-1 Y-252127 YUYAOP/N: 2 二、SCHEMATIC DIAGRAM: 三、WINDING SPECIFICATION: NO TERMINALWIRETURNSWINDING DIRECTION 1 S F 0.08 * 24P enameled wire 10TS anticlockwise 四、 ELECTRICAL CHARACTERISTICS: TEMPERATURE:25°C±10°C, RELATIVE HUMIDITY:65±20％ NO ITEM SPECIFICATION TEST FREQUENCY TEST EQUIPMENTS 1 IND 3.8UH±10 ％ Coil TERMINA L S-F100KHZ/1V LCZ METER1062B 2 IND S-F 6.5UH±10 ％ With magnetic discs 100KHZ/1V LCZ METER1062B 3 DCR S-F 85mΩ MAX1KHZ/1V TH2810 4S-Q valueF100KHZ/132MINV LCZ METER1062B PREPARED BY/DATECHECKED BY/DATE Zheng Shaodong 202 5.2.22 Yao Zhendong 2025.2.22 SPECIFICATION APPROVAL D E S T: 20.5 * 0.08 * 24P * 10TS - 6.5UH - 25mm + Lead wire sleeve tube 20MM / 43.5 * 0.8 double slot VERSION: V0 CUSTOMER: Shenzhen Jiayucang Technology Co., Ltd. CUST P/N: 25.21272-1 Y-252127 YUYAOP/N: 2 五，PRODUCT PICTURE 六、MATERIAL LIST NO MATERIAL NAME DESCRIPTION MANUFACTURER 1wire rod 0.08 * 24P enameled wire RH 2 magnetic sheet Ø43.5*5.3*0.8mm ferrite hard magnetic sheet KHF 3tin bar High-temperature environmentally friendly tin DB 4 glue BE885-9007BR 5tape No adhesive tape included 6gum double sides adhesive tape 7 packaging EPE foam Remark: The above materials comply with the environmental protection requirements of ROHS 2.0 + REACH. PREPARED BY/DATECHECKED BY/DATE Zheng Shaodong 202 5.2.22 Yao Zhendong 2025.2.22 DONGGUAN YUYAO ELECTRONIC TECHNOLOGY CO.,LTD ADD: Room 201, Building 2, No. 9, Gaolong East Road, Gaobu Town, Dongguan City, Guangdong Province TEL: 0769-82866410 FAX: 0769-82866409

CUSTOMER: PART NO.: DESCRIPTION: SPECIFICATION: DATE: 20.5 x 39, 0.08 × 100P, Magnetic edge protrudes by 08MM 20250221 SPECIFICATION FOR APPROVEAL TRX APPROVAL make audit CUSTOMER APPROVAL Result: qualified disqualification Others Acknowledgment Date project approveAcknowledgment Date Zeng Xiaoxian Qiu Zhihui 20250221 Coil + Magnetic Plate -Y20.5×39-08-FR JYC-C268 F NO. CUSTOMEU/DATE TERMINALITEM SPECIFICATIO N TEST FREQUENCY TEST EQUIPMENTS 1 2 3 4 IND. Frequence DC Q value R 20250221 20.5±1.0 39.0±1.5 1 0.08 × 100P hot air line 11TS anticlockwise J K L 42.5±1.0 M N O P 7.8uH ± 10% with magnetic sheet 100KHz/1.0V SHDA 1062 H 8.0±1.5 3.0±1.0 0.8±0.15 E A B C D 0-Y20.5×39-80-FR SPECIFICATION 二、schematic diagram: PREPARED BY/DATE CHECKED BY/DATE DESC Rev:A Customer: Date: Description: 一、DIMENSION:(mm) A B C D E F G I Note: 1. Coil sticker G42.5*0.8 hard magnetic material, with 20*1.0 magnetic sheet placed in the middle of the inner diameter. 2. Wrap 0MM heat- resistant tape at the outlet position of the coil. 3. Stick double-sided adhesive tape on the back of the magnetic sheet with ears. 4. The coil must not be loose. 三、WindingSpecification: NO.TERMINALWIRETurns Winding Direction 四、ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% G 20.0±1.0 JYC-C268 115-205KHz Coil + Magnetic Plate DONGGUAN YUYAO ELECTRONIC TECHNOLOGY CO.,LTD ADD: Room 201, Building 2, No. 9, Gaolong East Road, Gaobu Town, Dongguan City, Guangdong Province TEL: 0769-82866410 FAX: 0769-82866409

Ext Photos Model: WI00210 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Label and Label Location Model: WI00210 FCC ID: 2BSPP-WI00210 1.5cm 5.0cm

Int Photos Model: WI00210 Photo 1 Photo 2 Photo 3 Photo 4 Phone ANT Photo 5 Photo 6 AirPods ANT Photo 7 Photo 8 Photo 9 Photo 10

- Page 1 of 11 - Report No.: HB20251021057E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: 2-in-1 Wireless Charger Trade Mark: N/A Model Number: WI00210 FCC ID: 2BSPP-WI00210 Prepared for Dongguan Haoyu Technology Co., Ltd. Room 501, Building 2, Keruixin Science and Technology Park, No. 76 Dasha Road, Dalingshan Town, Dongguan City Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20251021057E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................... 9 4.1.4. Test Result ................................................................................................................................................... 9 5 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 11 - Page 3 of 11 - Report No.: HB20251021057E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Dongguan Haoyu Technology Co., Ltd. Address ................................. : Room 501, Building 2, Keruixin Science and Technology Park, No. 76 Dasha Road, Dalingshan Town, Dongguan City Manufacturer's Name .......... : Dongguan Haoyu Technology Co., Ltd. Address ................................. : Room 501, Building 2, Keruixin Science and Technology Park, No. 76 Dasha Road, Dalingshan Town, Dongguan City Product description Product name ........................ : 2-in-1 Wireless Charger Model Number ....................... : WI00210 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Oct. 21, 2025~Oct. 31, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20251021057E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue …

Text truncated - open the document above for the full version.

- Page 1 of 33 - Report No.: HB20251021057E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: 2-in-1 Wireless Charger Trade Mark: N/A Model Number: WI00210 FCC ID: 2BSPP-WI00210 Prepared for Dongguan Haoyu Technology Co., Ltd. Room 501, Building 2, Keruixin Science and Technology Park, No. 76 Dasha Road, Dalingshan Town, Dongguan City Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 33 - Report No.: HB20251021057E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................. 7 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 10 5 TEST ITEM AND RESULTS ............................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 24 7 PHOTOGRAPHS OF THE EUT .......................................................................................................................... 26 - Page 3 of 33 - Report No.: HB20251021057E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Dongguan Haoyu Technology Co., Ltd. Address ................................. : Room 501, Building 2, Keruixin Science and Technology Park, No. 76 Dasha Road, Dalingshan Town, Dongguan City Manufacturer's Name .......... : Dongguan Haoyu Technology Co., Ltd. Address ................................. : Room 501, Building 2, Keruixin Science and Technology Park, No. 76 Dasha Road, Dalingshan Town, Dongguan City Product description Product name ........................ : 2-in-1 Wireless Charger Model Number ....................... : WI00210 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Oct. 21, 2025~Oct. 31, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 33 - Report No.: HB20251021057E-01 Add:Room 102, 201, Buil…

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: WI00210 Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted Emission MPE