2BSSA-K94G Smart watch

HKLAGENIOTECHNOLOGYCO.,LIMITED RM171017/FTHECLOUD111TUNGCHAUSTREETTAIKOKTSUIHK FederalCommunicationsCommissionDate ： 2026-1-7 AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 FCCID:2BSSA-K9 FRN:0037613932 USAgent–AttestationStatement/Part2.911(d)(7) HKLAGENIOTECHNOLOGYCO.,LIMITEDcertifies,thatasof2026-1-7,wehavedesignated FCCUSAgent,LLCtoacceptserviceofprocessonourbehalfforFCCID:2BSSA-K9. HKLAGENIOTECHNOLOGYCO.,LIMITED,acceptstomaintainanagentofserviceofprocess intheUnitedStatesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminated allmarketingandimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofany Commission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationofbeing thedesignatedagentforthepurposeofacceptingserviceofprocessonbehalfofHKLAGENIO TECHNOLOGYCO.,LIMITEDforFCCID:2BSSA-K9. DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC FRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:HKLAGENIOTECHNOLOGY CO.,LIMITED DesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:AliceZengDesignatedAgentRepresentative:TimPayne Signature: Signature:

HK LAGENIO TECHNOLOGY CO.,LIMITED RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Jan. 23, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BSSA-K9 HK LAGENIO TECHNOLOGY CO.,LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Alice Zeng Title:Manager Address: RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK Tel.: 0755 83683227 Email: [email protected]

HK LAGENIO TECHNOLOGY CO.,LIMITED RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK 1| P a g e Attestation Statements To: Federal Communications Commission Date: Jan. 23, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BSSA-K9 Product Name: 4G Smart Watch This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendixevaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Alice Zeng Title:Manager Address: RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK Tel.: 0755 83683227 Email: [email protected] HK LAGENIO TECHNOLOGY CO.,LIMITED RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK 2| P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☐ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ There is storage capacitylimitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operatingsystem used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☒ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 Google 16.2.40.ve.arm64 Google 2 Google TV 4.39.2835.701168117.6 Google 3 Maps 25.03.01.715545067 Google 4 Gmail 2025.01.05.715468168 Google 5 Android Android 15 Android

HK LAGENIO TECHNOLOGY CO.,LIMITED Family models difference declaration 4G Smart watch FCC ID:2BSSA-K9 Model: K 9 Family Model: L47Q Difference declaration: All models are the same circuit and RF module, except for model name. Regards, Signature Alice Zeng/ Manager Date/City: 2026-01-23 / Hongkong Phone: 0755 83683227 E-mail:[email protected]

HK LAGENIO TECHNOLOGY CO.,LIMITED RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK 2026/01/23 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BSSA-K9 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby requestpermanent confidential treatment of the exhibits accompanying thiscertification application as outlined below :  Block Diagram  Schematics  Operational Description  Part List  Tune-up Procedure The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180)days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOMin the event information regarding the product or the product is made available to the public before the requested period has expired.  User Manual  Internal Photos  Test Setup Photos Sincerely, Applicant Signature Printed Name: Alice Zeng Title:Manager Address: RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK Tel.: 0755 83683227 Email: [email protected]

HK LAGENIO TECHNOLOGY CO.,LIMITED RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK 2026/01/23 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BSSA-K9 I, the undersigned, hereby authorize (Shenzhen NTEK Testing Technology Co., Ltd.) to act on our behalfin all matters relating to this application for equipment certification. Any act carried out by (Shenzhen NTEK Testing Technology Co., Ltd.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (HK LAGENIO TECHNOLOGY CO.,LIMITED). We certify that we are not subject to a denial of federal benefits that includes FCC benefitspursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no partyto the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Applicant Signature Printed Name: Alice Zeng Title:Manager Address: RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK Tel.: 0755 83683227 Email: [email protected]

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

Page 1 of 220 Report No.: N25122405006E FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093) and IEEE Std 1528-2013 Product Name： 4G Smart Watch Brand Name： LAGENIO Model Name： K9 Family Model： L47Q Report No.： N25122405006E FCC ID： 2BSSA-K9 Prepared for HK LAGENIO TECHNOLOGY CO.,LIMITED RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK Prepared by Shenzhen NTEK Testing Technology Co., Ltd. No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China Tel. 0755-23200050 Website: http://www.ntek.org.cn Page 2 of 220 Report No.: N25122405006E TEST RESULT CERTIFICATION Applicant’s name ................. : HK LAGENIO TECHNOLOGY CO.,LIMITED Address ................................. : RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK Manufacturer's Name .......... : SHENZHEN LAGENIO TECHNOLOGY CO.,LIMITED Address ................................. : Floor 12th, Block B, Longhua Digital Innovation Center, North Station Community,Minzhi Street, Longhua District, Shenzhen,China Product description Product name ........................ : 4G Smart Watch Brand Name ......................... : LAGENIO Model and/or type reference ............................. : K9 Family Model ......................... : L47Q Standards ............................. : FCC 47 CFR Part 2(2.1093) IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093). The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number ............................ S2512250016-1# Date of Test Date (s) of performance of tests ............. : Dec. 27, 2025~ Jan. 07, 2026 Date of Issue .......................................... : Jan. 21, 2026 Test Result .............................................. : Pass Prepared By : Reviewed By : Approved By : Owen Xiao (Project Engineer) Aaron Cheng (Supervisor) Alex Li (Manager) Page 3 of 220 Report No.: N25122405006E ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Jan. 21, 2026 Owen Xiao Page 4 of 220 Report No.: N25122405006E TABLE OF CONTENTS 1. General Information .......................................................................................... 6 1.1. RF exposure limits .................................................................................. 6 1.2. Statement of Compliance ....................................................................... 7 1.3. EUT Description ..................................................................................... 7 1.4. Test specification(s) ................................................................................ 8 1.5. Ambient Condition ................................................................................. 9 1.6. Facilities And Accreditations .................................................................. 9 1.6.1. Facilities ........................................................................................... 9 1.6.2. Laboratory Accreditations And Listings ............................................ 9 2. SAR Measurement System ............................................................................... 10 2.1. SATIMO SAR Measurement Set-up Diagram ......................................... 10 2.2. Robot ................................................................................................... 11 2.3. E-Field Probe ........................................................................................ 12 2.3.1. E-Field Probe Calibration ................................................................ 12 2.4. SAM phantoms .................................................................................... 13 2.4.1. Technical Data ................................................................................ 14 2.5. Device Holder ...................................................................................... 15 2.6. Test Equipment List .............................................................................. 16 3. SAR Measurement Procedures ........................................................................ 18 3.1. Power Reference.................................................................................. 18 3.2. Area scan & Zoom scan ........................................................................ 18 3.3. Description of interpolation/extrapolation scheme ............................. 20 3.4. Volumetric Scan ................................................................................... 20 3.5. Power Drift .......................................................................................... 20 4. System Verification Procedure ......................................................................... 21 4.1. Tissue Verification ................................................................................ 21 4.1.1. Tissue Dielectric Parameter Check Results ..................................... 22 4.2. System Verification Procedure ............................................................. 23 4.2.1. System Verification Results ............................................................ 24 4.2.2. Initial Test Position SAR Test Reduction Procedure ......................... 25 4.2.3. Initi…

Text truncated - open the document above for the full version.

Page 78 of 220 Report No.: N25122405006E F. 3D Image 3D screen shot Hot spot position Page 79 of 220 Report No.: N25122405006E 6# System check at 2600 MHz Date of measurement: 4/1/2026 A. Experimental conditions. Probe 0725-EPGO-448 ConvF 1.52 Area Scan dx=12mm dy=12mm, Complete Zoom Scan 7x7x7,dx=5mm dy=5mm dz=5.0mm,Complete Phantom Validation plane Device Position Dipole Band CW2600 Signal CW Channels/Frequency Middle B. Permitivity Middle TX Frequency (MHz) 2600.00 Relative permitivity (real part) 39.74 Relative permitivity (imaginary part) 13.71 Conductivity (S/m) 1.98 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=-2.00, Y=1.00 ; SAR Peak: 10.43 W/kg D. SAR 1g & 10g SAR 10g (W/Kg) 2.340 SAR 1g (W/Kg) 5.544 Variation (%) 0.30 Horizontal validation criteria: minimum distance (mm) 10.00 Vertical validation criteria: SAR ratio M2/M1 (%) 48.54 E. Z Axis Scan Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 10.109 5.904 2.866 1.411 0.734 0.381 0.184 Page 80 of 220 Report No.: N25122405006E F. 3D Image 3D screen shot Hot spot position Page 81 of 220 Report No.: N25122405006E 12. Appendix C. Plots of High SAR Measurement 1# SAR Measurement at GPRS850 (Body, Validation Plane) 2# SAR Measurement at GPRS850 (Body, Validation Plane) 3# SAR Measurement at GPRS1900 (Body, Validation Plane) 4# SAR Measurement at GPRS1900 (Body, Validation Plane) 5# SAR Measurement at Band 2 (1900) (Body, Validation Plane) 6# SAR Measurement at Band 2 (1900) (Body, Validation Plane) 7# SAR Measurement at Band 4 (1700) (Body, Validation Plane) 8# SAR Measurement at Band 4 (1700) (Body, Validation Plane) 9# SAR Measurement at Band 5 (850) (Body, Validation Plane) 10# SAR Measurement at Band 5 (850) (Body, Validation Plane) 11# SAR Measurement at ISM (Body, Validation Plane) 12# SAR Measurement at ISM (Body, Validation Plane) 13# SAR Measurement at LTE band 2 (Body, Validation Plane) 14# SAR Measurement at LTE band 2 (Body, Validation Plane) 15# SAR Measurement at LTE band 4 (Body, Validation Plane) 16# SAR Measurement at LTE band 4 (Body, Validation Plane) 17# SAR Measurement at LTE band 5 (Body, Validation Plane) 18# SAR Measurement at LTE band 5 (Body, Validation Plane) 19# SAR Measurement at LTE band 7 (Body, Validation Plane) 20# SAR Measurement at LTE band 7 (Body, Validation Plane) 21# SAR Measurement at LTE band 12 (Body, Validation Plane) 22# SAR Measurement at LTE band 12 (Body, Validation Plane) 23# SAR Measurement at LTE band 13 (Body, Validation Plane) 24# SAR Measurement at LTE band 13 (Body, Validation Plane) 25# SAR Measurement at LTE band 17 (Body, Validation Plane) 26# SAR Measurement at LTE band 17 (Body, Validation Plane) 27# SAR Measurement at LTE band 26 (Body, Validation Plane) 28# SAR Measurement at LTE band 26 (Body, Validation Plane) 29# SAR Measurement at LTE band 26 (Body, Validation Plane) 30# SAR Measurement at LTE band 26 (Body, Validation Plane) 31# SAR Measurement at LTE band 41 (Body, Validation Plane) 32# SAR Measurement at LTE band 41 (Body, Validation Plane) 33# SAR Measurement at LTE band 66 (Body, Validation Plane) 34# SAR Measurement at LTE band 66 (Body, Validation Plane) Page 82 of 220 Report No.: N25122405006E 1# SAR Measurement at GPRS850 (Body, Validation Plane) Date of measurement: 5/1/2026 A. Experimental conditions. Probe 0725-EPGO-448 ConvF 1.32 Area Scan dx=15mm dy=15mm, Complete Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5.0mm,Complete Phantom Validation plane Device Position Body Band GPRS850 Signal TDMA (GPRS) Channels/Frequency Middle (189)/ frequency 836.40 Mhz Modulation GMSK (CS-4) TX-slots 4 B. Permitivity Middle TX Frequency (MHz) 836.40 Relative permitivity (real part) 41.05 Relative permitivity (imaginary part) 19.17 Conductivity (S/m) 0.89 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=3.00, Y=-12.00 ; SAR Peak: 1.64 W/kg D. SAR 1g & 10g SAR 10g (W/Kg) 0.567 SAR 1g (W/Kg) 1.005 Variation (%) -2.10 Horizontal validation criteria: minimum distance (mm) 16.00 Vertical validation criteria: SAR ratio M2/M1 (%) 58.68 E. Z Axis Scan Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 1.623 1.060 0.622 0.377 0.242 0.153 0.099 Page 83 of 220 Report No.: N25122405006E F. 3D Image 3D screen shot Hot spot position Page 84 of 220 Report No.: N25122405006E 2# SAR Measurement at GPRS850 (Body, Validation Plane) Date of measurement: 5/1/2026 A. Experimental conditions. Probe 0725-EPGO-448 ConvF 1.32 Area Scan dx=15mm dy=15mm, Complete Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5.0mm,Complete Phantom Validation plane Device Position Body Band GPRS850 Signal TDMA (GPRS) Channels/Frequency Middle (189)/ frequency 836.40 Mhz Modulation GMSK (CS-4) TX-slots 4 B. Permitivity Middle TX Frequency (MHz) 836.40 Relative permitivity (real part) 41.05 Relative permitivity (imaginary part) 19.17 Conductivity (S/m) 0.89 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum location: X=-10.00, Y=-12.00 ; SAR Peak: 0.56 W/kg D. SAR 1g & 10g SAR 10g (W/Kg) 0.196 SAR 1g (W/Kg) 0.338 Variation (%) -2.41 Horizontal validation criteria: minimum distance (mm) 16.00 Vertical validation criteria: SAR ratio M2/M1 (%) 59.85 E. Z Axis Scan Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.519 0.345 0.206 0.132 0.086 0.054 0.038 Page 85 of 220 Report No.: N25122405006E F. 3D Image 3D screen shot Hot spot position Page 86 of 220 Report No.: N25122405006E 3# SAR Measurement at GPRS1900 (Body, Validation Plane) Date of measurement: 7/1/2026 A. Experimental conditions. Probe 0725-EPGO-448 ConvF 1.58 Area Scan dx=15mm dy=15mm, Complete Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5.0mm,Complete Phantom Validation plane Device Position Body Band GPRS1900 Signal TDMA (GPRS) Channels/Frequency Middle (661)/ frequency 1880.00 Mhz Modulation GMSK (CS-4) TX-slots 4 B. Permitivity Middle TX Frequency (MHz) 1880.00 Relative permitivity (real part) 38.47 Relative permitivity (imaginary part) 13.77 Conductivity (S/m) 1.44 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Maximum …

Text truncated - open the document above for the full version.

Page 152 of 220 Report No.: N25122405006E Page 153 of 220 Report No.: N25122405006E Page 154 of 220 Report No.: N25122405006E Page 155 of 220 Report No.: N25122405006E Page 156 of 220 Report No.: N25122405006E Page 157 of 220 Report No.: N25122405006E Page 158 of 220 Report No.: N25122405006E Page 159 of 220 Report No.: N25122405006E Page 160 of 220 Report No.: N25122405006E Page 161 of 220 Report No.: N25122405006E Page 162 of 220 Report No.: N25122405006E Page 163 of 220 Report No.: N25122405006E Page 164 of 220 Report No.: N25122405006E Page 165 of 220 Report No.: N25122405006E Page 166 of 220 Report No.: N25122405006E Page 167 of 220 Report No.: N25122405006E Page 168 of 220 Report No.: N25122405006E Page 169 of 220 Report No.: N25122405006E Page 170 of 220 Report No.: N25122405006E Page 171 of 220 Report No.: N25122405006E Page 172 of 220 Report No.: N25122405006E Page 173 of 220 Report No.: N25122405006E Page 174 of 220 Report No.: N25122405006E Page 175 of 220 Report No.: N25122405006E

Page 176 of 220 Report No.: N25122405006E Page 177 of 220 Report No.: N25122405006E Page 178 of 220 Report No.: N25122405006E Page 179 of 220 Report No.: N25122405006E Page 180 of 220 Report No.: N25122405006E Page 181 of 220 Report No.: N25122405006E Page 182 of 220 Report No.: N25122405006E Page 183 of 220 Report No.: N25122405006E Page 184 of 220 Report No.: N25122405006E Page 185 of 220 Report No.: N25122405006E Page 186 of 220 Report No.: N25122405006E Page 187 of 220 Report No.: N25122405006E Page 188 of 220 Report No.: N25122405006E Page 189 of 220 Report No.: N25122405006E Page 190 of 220 Report No.: N25122405006E Page 191 of 220 Report No.: N25122405006E Page 192 of 220 Report No.: N25122405006E Page 193 of 220 Report No.: N25122405006E Page 194 of 220 Report No.: N25122405006E Page 195 of 220 Report No.: N25122405006E Page 196 of 220 Report No.: N25122405006E Page 197 of 220 Report No.: N25122405006E Page 198 of 220 Report No.: N25122405006E

Page 199 of 220 Report No.: N25122405006E Page 200 of 220 Report No.: N25122405006E Page 201 of 220 Report No.: N25122405006E Page 202 of 220 Report No.: N25122405006E Page 203 of 220 Report No.: N25122405006E Page 204 of 220 Report No.: N25122405006E Page 205 of 220 Report No.: N25122405006E Page 206 of 220 Report No.: N25122405006E Page 207 of 220 Report No.: N25122405006E Page 208 of 220 Report No.: N25122405006E Page 209 of 220 Report No.: N25122405006E Page 210 of 220 Report No.: N25122405006E Page 211 of 220 Report No.: N25122405006E Page 212 of 220 Report No.: N25122405006E Page 213 of 220 Report No.: N25122405006E Page 214 of 220 Report No.: N25122405006E Page 215 of 220 Report No.: N25122405006E <Justification of the extended calibration> If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 750MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -29.73 - 52.50 - Feb. 21, 2024 29.875 0.488 52.798 0.298 Feb. 13, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 216 of 220 Report No.: N25122405006E <Head 835MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -42.84 - 50.50 - Feb. 21, 2024 -46.216 7.88 51.571 1.071 Feb. 13, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 217 of 220 Report No.: N25122405006E <Head 1800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -24.53 - 44.8 - Feb. 21, 2024 -25.579 4.276 44.876 0.076 Feb. 13, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 218 of 220 Report No.: N25122405006E <Head 1900MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.28 - 46.2 - Feb. 21, 2024 -27.206 16.86 46.948 0.748 Feb. 13, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 219 of 220 Report No.: N25122405006E <Head 2450MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -29.27 - 53.6 - Feb. 21, 2024 -25.738 12.07 55.969 2.369 Feb. 13, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 220 of 220 Report No.: N25122405006E <Head 2600MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -25.57 - 54.5 - Feb. 21, 2024 -23.352 8.674 55.439 0.939 Feb. 13, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data _____________________________________ END_______________________________________

Technical Specification Antenna Mode L47Q LDS ANT Manufactured SHENZHEN HENGXIANGTONG ANTENNA TECNOLOGY CO., LTD. Address 606, Building E, Enterprise Aviation Technology Innovation Research and Development Industrial Park, No. 1008, Songbai Road, Sunshine Community, Xili Street, Nanshan District, Shenzhen Size & Picture GSM/WDMA/LTE Main: 31.62mm*28.25mm*8.16mm PIFA G/W/B: 15.58mm*10.63mm*8.75mm PIFA Technical Specification Band Mode Frequency Antenna Type Antenna Peak Gain GSM Band Band-5 GSM 850 824-894 PIFA -5.5 dBi Band-2 PCS 1900 1850-1990 -2.45 UMTS Band Band-1 2100 1920-2170 PIFA -2.52 dBi Band-2 1900 1850-1990 -2.45 Band-4 1700/2100 1710-2155 -3.01 Band-5 850 824-894 -5.5 LTE Band Band-1 2100 FDD 1920-2170 PIFA -2.52 dBi Band-2 1900 FDD 1850-1990 -2.45 Band-4 1700/2100 FDD 1710-2155 -3.01 Band-5 850 FDD 824-894 -5.5 Band-7 2600 FDD 2500-2690 -3.0 Band-12 700 FDD 699-746 -7.52 Band-13 FDD 777-787 -7.11 Band-17 700 FDD 704-746 -7.53 Band-28 700 FDD 703-803 -7.52 Band-38 2600 TDD 2570-2620 -3.0 Band-41 2500 TDD 2496-2690 -3.0 Band-66 1700 FDD 1710-2200 -2.52 WiFi 802.11b 2.4GHz 2401-2495 PIFA -3.5 dBi GPS Gps L1 Band 1575.42 PIFA -2.5 dBi Technical Specification Main 3D and 2D Patten Plots Main: 700Mhz Main: 700Mhz Main:800Mhz Main: 800Mhz Main: 960Mhz Main: 960Mhz Main: 1700Mhz Main:1700Mhz Main: 2180Mhz Main: 2170Mhz Main: 2700Mhz Main: 2700Mhz Technical Specification G/W/B 3-D Patten Plots GPS:1575Mhz GPS:1575Mhz W/B: 2400Mhz W/B: 2400Mhz W/B: 2500Mhz W/B: 2500Mhz

Report No.: N25122405002E Version.1.3 Page 1 of 78 FCC RADIO TEST REPORT FCC ID: 2BSSA-K9 Product: 4G Smart Watch Trade Mark: LAGENIO Model No.: K9 Family Model: L47Q Report No.: N25122405002E Issue Date: Jan. 20, 2026 Prepared for HK LAGENIO TECHNOLOGY CO.,LIMITED RM1710 17/F THE CLOUD 111 TUNG CHAU STREET TAI KOK TSUI HK Prepared by Shenzhen NTEK Testing Technology Co., Ltd. No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China Tel. 0755-23200050 Website:http://www.ntek.org.cn Report No.: N25122405002E Version.1.3 Page 2 of 78 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS ............................................................…

Text truncated - open the document above for the full version.