2BSSPATelepresence Robot

COMPANY LETTERHEAD Covered Equipment Certification Attestation Letter DATE Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2BSSPA No Isolation AS (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. No Isolation AS (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Petter Karal Title: Chief Growth Officer Company Name: No Isolation AS Date: 2/3/2026

U.S.AgentDesignationforServiceofProcess- CertificationAttestationLetter Date: ATTN.:ReviewingEngineer FCCID: Persection2.911(d)(7)oftheFCCrules,(“theapplicant”), FRN:certifiesthattheequipmentforwhichauthorizationissoughtis designatedtothefollowingU.S.agent*forserviceofprocess: CompanyName:+1ComplianceLLC PhysicalU.S.CompanyAddress:2113HuronCircle,Denton,Texas76210USA FRN:0033497389 Agentname:BenjaminW.Tidwell AgentEmailAddress:[email protected] Theabovecontactpersonacceptstheobligationforserviceofprocess. Theapplicantacceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-related proceedinginvolvingtheequipment. ApplicantSigned:AgentSigned: Signed:Signed: Printedname:Printedname:BenjaminW.Tidwell Title:Title:President Company:Company:+1ComplianceLLC FRN:FRN:0033497389 Date:Date: * theapplicantmustdesignateacontactlocatedintheUnitedStatesforpurposesofactingasthe applicant’sagentforserviceofprocess,regardlessofwhethertheapplicantisadomesticorforeign entity.AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforserviceofprocess. Docusign Envelope ID: 5062FF29-BAB6-45A6-A286-FE0CD14EB382 Chief Growth Officer Petter Karal 2BSSPA 0037592060 FRN No Isolation AS No Isolation AS 06 December 2025 09 December 2025 09 December 2025

COMPANY LETTERHEAD February 3, 2026 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2BSSPA Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 90 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform Nemko to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☒ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: Petter Karal Title: Chief Growth Officer Company Name: No Isolation AS

Label is located in the bottom as shown in the photo

REP148225 Nemko Group Nemko Scandinavia AS, Instituttveien 6, 2007 Kjeller, Norway TEL+47 22 96 03 [email protected] nemko.com/no Template version: B RF Exposure Assessment ProductTelepresence Robot Name and address of the applicant No Isolation AS Pilestredet 28 NO-0166 Oslo, Norway Name and address of the manufacturer No Isolation AS Pilestredet 28 NO-0166 Oslo, Norway ModelAV1.3 RatingSecondary Battery (7.3V DC ,10.5Ah, 6 cell Li-Ion) TrademarkNo Isolation Additional informationWiFi, LTE Evaluated according toFCC Part 2.1091 RF Exposure Assessment FCC KDB 447498 D01 General RF Exposure Guidance ISED RSS-102, Issue 6 Radio Frequency (RF) Exposure Compliance of Radiocommunications Apparatus Order numberPRJ0092738 Issue date2026-01-29 Name and address of the testing laboratory Nemko Scandinavia AS Instituttveien 6 2007 Kjeller, Norway www.nemko.com CAB Number: FCC: NO0001 ISED: NO0470 ISED No: 2040D-1 An accredited technical test executed under the Norwegian accreditation scheme Prepared by [Frode Sveinsen] This report was originally distributed electronically with digital signatures. For more information,pleasecontact NemkoScandinavia AS. Exposure Assessment FCC Part1.1307 REP148225 FCC ID: 2BSSPA Nemko Scandinavia ASPage 2 (4) Revision history Revision DateCommentSign A2025-01-29First EditionFS GENERAL REMARKS This report applies only to the sample(s) tested. It is the manufacturer's responsibility to ensure the additional production units of this product are manufactured with identical electrical and mechanical components. The manufacturer is solely responsible for any modifications to the product that could result in non-compliance with the relevant regulations. This report shall not be reproduced, except in full, without the written approval of Nemko. Any use which a third party makes of this report, or any reliance on, or decisions made based on it, are the responsibility of such third parties. Nemko Group accepts no responsibility for damage suffered by any third party because of decisions made or actions based on this report. Opinions expressed within this report regarding general assessments and qualifications for PASS or FAIL to the standards limits and requirements are not part of the current accreditation. Neither are opinions expressed regarding model variants covered by the testing of this report. Exposure Assessment FCC Part1.1307 REP148225 FCC ID: 2BSSPA Nemko Scandinavia ASPage 3 (4) 1 Exposure Evaluation 1.1EUT Technical Information ProductTelepresence Robot ManufacturerNo Isolation AS ModelAV1.3 FCC ID2BSSPA Serial number764YUF5S Hardware version/ Software version/ Operating ModesWiFi 6, 2.4GHz and 5GHz LTE Band 2, 4, 5, 12 Type of Power SupplySecondary Battery (6 cell Li-Ion, 7.3V DC, 10.5Ah) Charging PortUSB-C (PD Input: DC 15V, 3A) Device CategoryMobile Device Description of Test Item The EUT is a telepresence robot with WiFi and LTE connection. LTE is normally used only when WIFI is not available. The EUT contains the following certified modules: TechnologyManufacturerModelFCC IDISED ID (IC) LTEQuectelEG25-GLXMR202212EG25GL10224A-202212EG25GL WiFiMurataLBEE5PL2DLVPYLBES5PL2EL772C-LBES5PL2EL Antenna Data: TechnologyModelTypeFrequency rangePeak Gain LTEPulse Larsen W3796PCB SMD Antenna698 – 960 MHz1.5 dBi 1695 – 2200 MHz5.5 dBi WiFiPulse Larsen W3006Ceramic Chip Antenna2.4 – 2.5 GHz1.6 dBi 5.15 – 7.125 GHz4.2 dBi Exposure Assessment FCC Part1.1307 REP148225 FCC ID: 2BSSPA Nemko Scandinavia ASPage 4 (4) 1.2Evaluation Summary Maximum whole body power density is calculated using formula 3) from OET Bulletin 65 Edition 97-01 (page 19): Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna RF FunctionWiFi 2.4GHzWiFi 5GHzLTE B2LTE B4LTE B5LTE B12 Frequency (MHz)241251801850.71710.7824.7699.7 Conducted Output Power (dBm)20.0018.0023.0023.0023.0023.00 Tune-Up Tolerance (dB)0.000.000.000.000.000.00 Output Power incl. Tune-Up Tol. (W)0.1000.0630.2000.2000.2000.200 Antenna Gain (dBi)1.604.205.505.501.501.50 Antenna Gain (Numeric)1.452.633.553.551.411.41 Prediction Distance (cm)202020202020Σ of MPE Time Averaged Duty Cycle (%)10010010050100100ratios Calculated Power Density (W/m2)0.2880.3301.4080.7040.5610.561 FCC Limit (W/m2)10.00010.00010.00010.0005.4984.665 ISED Limit (W/m2)5.3669.0474.4774.2432.5772.303 MPE ratio FCC (Power Density/Limit)0.0290.0330.1410.0700.1020.120 MPE ratio ISED (Power Density/Limit)0.0540.0360.3150.1660.2180.243 Worst Case MPE Ratio, FCC0.0330.1410.174 Worst Case MPE Ratio, ISED 0.0540.3150.351 Duty Cycle is assumed to be 100% for all transmitters. Worst case for FCC is with WiFi 5GHz and LTE B2 active at the same time; worst Case for ISED Canada is WiFi 2.4GHz and LTE B2. The sum of MPE ratios is below 1 for all use cases, therefore the EUT is compliant with both FCC and ISED Canada Exposure requirements for simultaneous operation assumed the separation distance to any persons is at least 20cm. References 1) OET Bulletin 65 Edition 97-01, August 1997 2) KDB 447498 D01 General RF Exposure Guidance v06, October 23, 2015 3) Code of Federal Regulations, Title 47, FCC §1.131 4) ISED Canada RSS-102 Issue 6 2 4R PG S  

Nemko Group Nemko Scandinavia AS, Philip Pedersens vei 11, P.O. Box 91, 1366 Lysaker, Norway TEL +47 22 96 03 30 EMAIL [email protected] FCC ID. 2BSSPA REP145785 GenCode: 1 (Nemko template revision: 2021/10) Test Report Electromagnetic Compatibility Product School telepresence avatar / robot. Name and address of the applicant NO ISOLATION AS Pilestredet 28, 0166 Oslo, Norway Name and address of the manufacturer NO ISOLATION AS Pilestredet 28, 0166 Oslo, Norway Model AV1.3 Rating 7.27V DC (rechargeable battery pack PA‐INB2006F‐C17UL) or powered with an AC/DC adapter. 100-240V AC 50/60Hz 1.5A (AC/DC adapter input) Trademark NO ISOLATION Additional information Product with Wi-Fi 2.4GHz, Wi-Fi 5GHz and LTE. Tested according to FCC CFR 47 Subpart 15B ISED Canada ICES-003, Issue 7 Project number PRJ0092738 Tested in period 2026-01-12 and 2026-01-13 Issue date 2026-01-21 Name and address of the testing laboratory Nemko Scandinavia AS ☐ Location 1: Philip Pedersens vei 11, 1366 Lysaker, Norway ☒ Location 2: Instituttveien 6, 2007 Kjeller, Norway An accredited technical test executed under the Norwegian accreditation scheme Prepared by [Thanh Tran] Approved by [Thomas Dangle] TEST REPORT REP145785 Date: 2026-01-21 - Page 2 of 23 - REPORT REVISIONS Report Edition Date Project Description A 2026-01-21 PRJ0092738 First issued THIS REPORT APPLIES ONLY TO THE ITEM(S) AND CONFIGURATION(S) TESTED. It is the manufacturer's responsibility to assure the additional production units of this product are manufactured with identical electrical and mechanical components. The manufacturer is responsible to the authorities for any modifications made to the product, which result in non-compliance to the relevant regulations. Nemko authorizes the named Customer (Applicant) to reproduce this report provided it is reproduced in its entirety. Any reproduction of parts of this report requires approval in writing from Nemko. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko accepts no responsibility for damages suffered by any third party as a result of decisions made or actions based on this report. Opinions expressed within this report regarding general assessments and qualifications for PASS or FAIL to the standards limits and requirements, are not part of the current accreditation. Neither is opinions expressed regarding model variants covered by the testing performed in this report. Deviations from, additions to, or exclusions from the test specifications are described in “Test Report Summary”. This report was originally distributed electronically with digital signatures. For more information contact Nemko. TEST REPORT REP145785 Date: 2026-01-21 - Page 3 of 23 - DESCRIPTION OF TESTED ITEM(S) Product description .................... : The tested item is a school telepresence avatar / robot. The product is used as the “eyes, ears, and voice” of an absent student in the classroom, providing a “virtual presence” for the child when they cannot physically attend school. The product is controlled by the student through an app (AV1 app), where the student can observe what is happening in the classroom and control the robot movement as well as some expressions and other forms for interaction with the people in the classroom. Model/type ................................ : AV1.3 FCC ID ......................................... : 2BSSPA Serial number ............................. : 764YUF5S Operating voltage ....................... : 7.27V DC (capacity 10.5 Ah rechargeable battery pack PA-INB2006F-C17UL.4.2.R001 from Fey Elektronik) or powered with AC/DC switching adapter CUI Inc SMI45C (USB-C PD 27-45W), input 100- 240V AC 50/60Hz 1.5A Maximum power/current........... : 45W / 3A Insulation class ........................... : III Highest clock frequency ............. : 416MHz MIPI-CSI CLK to Camera. Hardware version ....................... : AV1.3 Software version ........................ : 3.1.0 Mounting position ...................... : ☒ Tabletop equipment ☐ Wall/ceiling mounted equipment ☐ Floor standing equipment ☐ Handheld equipment ☐ Rack mounted equipment ☐ Console equipment ☐ Other: Handheld CRITICAL MODULES/PARTS Description Manufacturer Type AC/DC switching adapter CUI INC SMI45C LTE module Quectel EG2x-GL Wi-Fi module Murata Electronics LBEE5PL2DL Camera Kai Lap Technologies KLT-MAA69-AR1335 V1.0 ACCESSORIES USED DURING TEST Description Manufacturer Type AC/DC switching adapter SMI45C SMI45C Wi-Fi router (2.4GHz and 5GHz) LYNKSYS WRT3200ACM Laptop Lenovo Thinkpad P1 Gen 7 Wideband radio communication tester R&S CMW500 INPUT/OUTPUT PORTS Port name and description Cable Longer than 3m Attached during test Shielded USB-C (for charger using AC/DC adapter with USB-C charger PD) ☐ ☒ ☐ This equipment has been tested with certain cable types and cable configurations. Any changes to these parameters when installed may influence the EMC properties of this equipment. TEST REPORT REP145785 Date: 2026-01-21 - Page 4 of 23 - OPERATING MODES OP no. Description Applied for testing Emissions Immunity OP1 Standby and charging mode (LTE-connection) ☒ ☐ OP2 Operating, Video streaming (2.4GHz Wi-Fi connection), EUT powered by Battery. ☒ ☐ OP3 Operating, Video streaming during charging (5GHz Wi-Fi connection) ☒ ☐ POWER SUPPLY CONDITIONS The following nominal power supply conditions have been tested: PC no. Voltage Frequency Type Ground terminal PC1 7.27 V ☐ AC 50Hz / ☐ AC 60Hz / ☒ DC ☐ 3AC / ☐ 3ACN / ☐ PoE ☐ PE / ☐ GND / ☒ None PC1 120 V (for charging mode) ☐ AC 50Hz / ☒ AC 60Hz / ☐ DC ☐ 3AC / ☐ 3ACN / ☐ PoE ☐ PE / ☐ GND / ☒ None OTHER INFORMATION Modifications ........................... : None Additional information ............. : The EUT connected LTE-band 2 or LTE-band 5 during emission test in standby and charging mode. The EUT powered by battery and connected 2.4GHz Wi-Fi during emission test in operating mode. The EUT powered b…

Text truncated - open the document above for the full version.