2BSTCH-F3Bluetooth headset

H-F3 H-F3 H-F3 H-F3 Product Instruction Manual FCC ID: 2BSTCH-F3 Instruction ManualType-C charging cable Instruction Manual Charging case cover Bluetooth earbuds (L) Charging case digital display Charging case Step 1: Place the earbuds in the charging case, close the case lid for 10 seconds, then open the lid and remove the earbuds. The primary and secondary earbuds will automatically pair. Once pairing is complete, the secondary earbud's indicator light will turn off, and the primary earbud's red and blue indicator lights will flash rapidly. Step 2: Open your phone and search for Bluetooth devices. Find "H-F3" in the list of Bluetooth devices, click to start connecting, and you can use it once the connection is successful. Step 3: Use the Bluetooth earbuds again. Take them out of the charging case and they will automatically pair and connect to the phone that was last connected. To achieve optimal listening performance, the headphone markings "R" indicate right ear wear, and "!" indicate left ear wear Friendly reminder: a: For first-time use, be sure to place the earbuds in the charging case and close the case lid for 10 seconds to activate them. b: For daily use, it is recommended not to frequently open and close the charging case lid. c: For daily use, it is recommended to turn on your phone's Bluetooth before taking out the earphones. Bluetooth earbuds (R) FunctionL (left ear) Click Click triple click double click Long press Long press double click R (right ear) 1.Accessories2.Pairing & Connection4.Music playback/call function/voice assistant 3. Wear headphones correctly Left earphone button area Right earphone button area Place the earbuds in the charging case and close the lid to start charging. While the earbuds are charging, a corresponding indicator light on the charging case will illuminate; the light will turn off when fully charged. 2. Disconnect the Bluetooth connection of the headphones. The Bluetooth headphones will automatically turn off after 3 minutes. 1. Turn off the earphones when they are placed in the charging case to charge. 3. Press and hold the earphone touch button for 5 seconds to turn off both earphones simultaneously. Note: When the charging case's battery level drops below 5%, the digital display on the charging case will flash a low battery warning; charging will stop when the battery level drops below 0%. 6.Charge the headphones11.Power off If the headphones are not connected to your phone, press and hold the left or right earbud simultaneously for 8 seconds to successfully restore them to factory settings. 12.Restore factory settings Pick up the headphones; for the first connection or to a new device, a mobile endpoint connection is required. 13.Connecting the headphones to the new device Insert the charging cable into the Type-C charging port of the charging case to charge it. 1. While the charging case is charging, the digital display will flash to indicate the current battery level. 2. Once fully charged, the digital display will stay lit at 100% battery level for approximately 2 minutes before turning off. 7.Charge the charging case. When the headphone voltage is low, a low battery voice reminder will be given every 5 minutes. Discharge Place the earbuds in the charging case and close the lid to charge. The digital display is constantly lit to indicate the current battery level, and corresponding LED lights on the left and right indicate charging. Once the earphones are fully charged, the corresponding LED lights on the left and right earphones turn off. The screen turns off when both earphones are fully charged. 8.Low battery warning for headphones 9.Charging box discharge phenomenon Four hits to enter Game Mode, then four hits to restore Music Mode 5.game modes Digital tube high lights current Digital tube flashing current display The digital display flashes to show the current battery level The digital tube is consta ntly on when fully charged, and the battery display will turn off after about 2 minutes The digital tube keeps the current battery level on, and the left and right scrolling lights correspond to the scrolling light indicators The corresponding scrolling lights on both sides turn off, and when they are fully charged, the digital display goes out The digital tube flashes at one position (priority for charging the compartment), and the scroll ing lights corresponding to the left and right ears are displayed Earphones can be charged by inserting them into the compar tment and closing the lid Earphones can be charged by inserting them into the compar tment and closing the lid Earphones can be charged by inserting them into the compar tment and closing the lid Charging current 320mA Battery fully charged: 4.2V ± 0.5V Earphone charging in the comp artment/Earphone fully charged drops to 2.4V to maintain voltage Charging box insert type-c charger while charging headphones in stock Uncharged Low power alarm status ≤ 5% Charging current in con stant current state The charging case is fully charged Earphone charging Headphones fully charged Simultaneously char ging headphones and charging case 10.Check the current battery level of the charging case Features Battery check Low battery alarm charge discharge Side fill Status Operation Digital tube display Pairing name: H-F3 Bluetooth version: Bluetooth 5.4 Earphone dimensions: 28.9*26.7*22mm Earphone charging time: approximately 1.5 hours Remote control function for the player: MFB (play/pause) Transmission range (Hz): 2.40GHz~2.48GHz Audio encoding formats: CVSD, MSBC, SBC, AAC Operating temperature: -15°C to +60°C Operating humidity: 10%~85% (non-freezing state) Communication distance: ≥10m 14.Headphone Specifications Dimensions: 65*54.5*28.7mm Charging port: Type-C Charging time for charging case: approximately 1.5 hours Input voltage: DC5V Charging current 320mA Output voltage: DC5V Operating temperature: -15°C to +60°C Operating humidity: 10%~85% (non-freezing state) 15.Charging Case Specificat…

Text truncated - open the document above for the full version.

ShenzhenLingyanTechnologyCo.,Ltd Rev1/26/2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025-12-13 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BSTCH-F3 ShenzhenLingyanTechnologyCo.,Ltd(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. ShenzhenLingyanTechnologyCo.,Ltd(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegratedKaspersky Lab,Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24- 886andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) ContactName:ZheSun

ShenzhenLingyanTechnologyCo.,Ltd Rev1/26/2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025/12/13 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BSTCH-F3 ShenzhenLingyanTechnologyCo.,Ltd(“theapplicant”)certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofits subsidiariesoraffiliates)asanentityproducing“covered” equipment. Sincerely, (Applicantsignature) ContactName:ZheSun

ShenzhenLingyanTechnologyCo.,Ltd Rev1/26/2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025/12/13 Ref:AttestationStatementsPart2.911(d)(7)Filing FCCIDorGranteeCode:FCCID:2BSTCH-F3or2BSTC ApplicantFRN:0037614344 ShenzhenLingyanTechnologyCo.,Ltd( “ theapplicant ” )certifiesthat,asofthedateofthefilingofthe application,REPAmericaLLCisourdesignatedU.S.agentforserviceofprocessfortheabovereferenced FCCID.ShenzhenLingyanTechnologyCo.,Ltdacceptstomaintainanagentfornolessthanoneyear afterthegranteehasterminatedallmarketingandimportationortheconclusionofanyCommission- relatedproceedinginvolvingtheequipment. REPAmericaLLCaccepts,asofthedateofthefilingoftheapplication,theobligationofthedesignated U.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:REPAmericaLLC S.AgentFRN:0034192500 Address:350TerrySt.200Longmont,CO80501UnitedStates ContactPerson:MrBenXu Tel.:(719)201-3314 Email:[email protected] Sincerely, ZheSunMrBenXu ShenzhenLingyanTechnologyCo.,LtdREPAmericaLLC [InsertApplicantsignature][U.S.Agentsignature]

ShenzhenLingyanTechnologyCo.,Ltd Rev11/20/07 FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2BSTCH-F3. PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitType Schematics Blockdiagram Operationdescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealsorequest temporaryconfidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitType Sincerely, (signature) ZheSun

ShenzhenLingyanTechnologyCo.,Ltd M:\MasterDocuments\TEMPLATES\POA_Letter.doc FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Date:2025/12/13 SUBJECT:FCCApplicationforFCCID:2BSTCH-F3 ToWhomItMayConcern: We,theundersigned,herebyauthorizeMachaelMoatShenzhenDACETesting TechnologyCo.,Ltd.onourbehalf,toapplytotheFederalCommunicationsCommission onourequipment.AnyandallactscarriedoutbyShenzhenDACETestingTechnology Co.,Ltd.onourbehalfshallhavethesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, (signature) ZheSun

FCCID:2BSTCH-F3 External FCCID:2BSTCH-F3 FCCID:2BSTCH-F3 FCCID:2BSTCH-F3 FCCID:2BSTCH-F3

FCCID:2BSTCH-F3 LabelLocation: FCCIDplaceinusermanual LabelLocation: FCCstatementplaceinusermanual NOTE:DuetotheproductbeingtoosmalltoprinttheFCCIDcode,FCCIDisprintedonthe productboxandinstructionmanual

FCCID:2BSTCH-F3 Internal FCCID:2BSTCH-F3 FCCID:2BSTCH-F3 FCCID:2BSTCH-F3 ANT FCCID:2BSTCH-F3

Page1of1 RFExposureEvaluationReport 1RFEXPOSURE ProductName: Bluetoothheadset ModelNo: H-F3 FCCID:2BSTCH-F3 NOTE:accordingtoKDB447498D01GeneralRFExposureGuidancev06 ， Unlessspecifically requiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-g extremitySARevaluationforgeneralpopulationexposureconditions,bymeasurementornumerical simulation,isnotrequiredwhenthecorrespondingSARTestExclusionThresholdcondition(s), listedbelow,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: TheEUTisaportabledevice [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Theproductisusedatadistanceof5mmfromthehumanbody. Here, 1.1EUTRFEXPOSUREEVALUATION OperationalMode:EDR Channel (MHz) MaximumPeak Conducted OutputPower (dBm) Tuneup tolerance (dB) Maximum tune-up Power (dBm) Maximum tune-up Power (mW) Calculated value Exclusion threshold 24804.42 ±1 5.423.4831.0803 Conclusion:thecalculatedvalue≤3.0,SARisexempted. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevicecanbeusedin portableexposureconditionwithoutrestriction.

5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 1 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com Product Name: WiFi/Bluetooth Chip Antenna – CW201 Part Number: H2U34C1H1B0100 Features: z Supporting WiFi/Bluetooth, covering 2400 to 2484 MHz z Surface Mount z Dimensions: 2.0 x 1.2 x 0.6 mm z High performance, small size. z RoHS & REACH Compliant Applications: z ISM 2.4 GHz applications z ZigBee/BLE applications z Bluetooth earphone systems z Hand-held devices when WiFi / Bluetooth functions are needed, e.g., Smart phones z IEEE802.11 b/g/n z Wireless PCMCIA cards or USB dongles 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 2 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com WiFi/Bluetooth Chip Antenna MODEL: CW201 Version: A I. Specifications: Mechanical Specifications Dimensions (mm) 2.0(L) x 1.2 (W) x 0.6 (H) Material Ceramic Termination Ag (environmental Pb free) Environmental Conditions Operation Temperature ( o C) -40 ~ +85 Storage Temperature ( o C) -5 ~ +40 Relative Humidity 10 ~ 70 % Items Specifications Frequencies (MHz) 2400~2484 Efficiency (%) 59.2 Average Gain (dB) -2.3 Peak Gain (dBi) 2.5 Test Condition 40 x 20 mm² (Evaluation board) Impedance (ƻ) 50 Polarization Linear Polarization 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 3 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com II. Layout Guide: Solder Land Pattern: The solder land pattern (gold marking areas) is shown below. Recommendation on matching circuit will be provided according to customer’s installation conditions. Grounding Pin Signal Input Transmission Line with 50ƻ Impedance Characteristic Top View Bottom View 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 4 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com III. Mechanical Dimensions: a) Antenna Dimensions b) PIN Definition PIN 1 2 Soldering Pad Signal Input Tuning/Signal Output TOP View Bottom View Side View Unit: mm Unit: mm 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 5 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com c) Test Board with Antenna Unit: mm 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 6 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com IV. Properties: a) Return loss (dB) b) Efficiency (%) 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 7 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com c) Average Gain (dB) d) Peak Gain (dBi) 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 8 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com V. Antenna Radiation Pattern Measurement: The antenna radiation patterns are measured in Unictron’s 3D Anechoic Chamber. The measurement setup is as show below. Z Y X 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 9 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com 3D Radiation Gain Pattern 2450 MHz (unit: dBi) X Y Z 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 10 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com VI. Frequency tuning: System Matching Circuit Component Location Description Vendor Tolerance 1 N/C - - 2 5.0 pF (0402) MURATA ±0.05 pF 3 0.8 pF (0402) MURATA ±0.05 pF 4 2.7 pF (0201) MURATA ±0.05 pF DC Block 22 pF (0402) MURATA ±5% 1 3 2 DC Block 4 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 11 © Unictron Technologies Corp . All specifications subject to change without notice. www.sanav.com www.unictron.com VII. Soldering conditions: Typical Soldering Profile for Lead-free Process VIII. Reminders for use of Unictron’s ceramic chip antennas: a) This chip antenna is made of ceramic materials which is relatively more rigid and brittle compared to circuit board materials. Furthermore, the length of this antenna is quite long. Bending of circuit board at the locations where chip antenna is mounted may cause the cracking of solder joints or antenna itself. b) Punching/cutting of the break-off tab of PCB panel may cause severe bending of the circuit board which may result in cracking of solder joints or chip antenna itself. Therefore break-off tab shall be located away from the installation site of chip antenna. c) Be cautious when ultrasonic welding process needs to be used near the locations where chip antennas are installed. Strong ultrasonic vibration may cause the cracking of chip antenna solder joints. 5F., No. 83, Kewang Rd., Longtan Dist., Taoyuan City 32556, Taiwan (R.O.C.) Tel: 886-3-4072728焋Fax: 886-3-4072738 焋[email protected] 12 © Unictron Technologies Corp . All specifications subject to change with…

Text truncated - open the document above for the full version.

V1.0ReportNo.:DACE251124009RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 1 of 92 RFTESTREPORT For ShenzhenLingyanTechnologyCo.,Ltd ProductName:Bluetoothheadset TestModel(s):H-F3 ReportReferenceNo.:DACE251124009RL001 FCCID:2BSTCH-F3 Applicant’sName:ShenzhenLingyanTechnologyCo.,Ltd Address: 6F,Bldg23,LongbiIndPark,DafapuCommunityBantian,Longgang, Shenzhen,Guangdong,China TestingLaboratory:ShenzhenDACETestingTechnologyCo.,Ltd. Address: 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark, TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen, Guangdong,China TestSpecificationStandard:47CFRPart15.247 DateofReceipt:November24,2025 DateofTest:November24,2025toDecember9,2025 DataofIssue:December9,2025 Result:Pass Note:Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenDACE TestingTechnologyCo.,Ltd.ThisdocumentmaybealteredorrevisedbyShenzhenDACETestingTechnology Co.,Ltd.personnelonly,andshallbenotedintherevisionsectionofthedocument.Thetestresultsinthe reportonlyapplytothetestedsample V1.0ReportNo.:DACE251124009RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 2 of 92 Applyforcompanyinformation Applicant’sName:ShenzhenLingyanTechnologyCo.,Ltd Address:6F,Bldg23,LongbiIndPark,DafapuCommunityBantian,Longgang, Shenzhen,Guangdong,China ProductName:Bluetoothheadset TestModel(s):H-F3 SeriesModel(s):N/A TestSpecificationStandard(s):47CFRPart15.247 NOTE1: Themanufacturershouldensurethatallproductsinseriesproductionareinconformitywiththeproductsampledetailedin thisreport.Iftheproductinthisreportisusedinanyconfigurationotherthanthatdetailedinthereport,themanufacturer mustensurethenewsystemcomplieswithallrelevantstandards. Compiledby: Supervisedby: Approvedby: LucyMo/TestEngineerBenTang/ProjectEngineerMachaelMo/Manager December9,2025December9,2025December9,2025 V1.0ReportNo.:DACE251124009RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 3 of 92 RevisionHistoryOfReport VersionDescriptionREPORTNo.IssueDate V1.0OriginalDACE251124009RL001December9,2025 V1.0ReportNo.:DACE251124009RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 4 of 92 CONTENTS 1TESTSUMMARY...................................................................................................................................................6 1.1TESTSTANDARDS........................................................................................................................................6 1.2SUMMARYOFTESTRESULT.........................................................................................................................6 2GENERALINFORMATION....................................................................................................................................7 2.1CLIENTINFORMATION..................................................................................................................................7 2.2DESCRIPTIONOFDEVICE(EUT)..................................................................................................................7 2.3DESCRIPTIONOFTESTMODES....................................................................................................................8 2.4DESCRIPTIONOFSUPPORTUNITS................................................................................................................8 2.5EQUIPMENTSUSEDDURINGTHETEST........................................................................................................9 2.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................11 2.7IDENTIFICATIONOFTESTINGLABORATORY.................................................................................................11 2.8ANNOUNCEMENT........................................................................................................................................11 3EVALUATIONRESULTS(EVALUATION)...........................................................................................................12 3.1ANTENNAREQUIREMENT............................................................................................................................12 3.1.1Conclusion:.................................................................................................................................12 4RADIOSPECTRUMMATTERTESTRESULTS(RF).........................................................................................13 4.1CONDUCTEDEMISSIONATACPOWERLINE................................................................................................13 4.1.1E.U.T.Operation:........................................................................................................................13 4.1.2TestSetupDiagram:...................................................................................................................13 4.1.3TestData:...................................................................................................................................14 4.220DBBANDWIDTH.....................................................................................................................................16 4.2.1E.U.T.Operation:........................................................................................................................16 4.2.2TestSetupDiagram:...............................…

Text truncated - open the document above for the full version.

FCCID:2BSTCH-F3 ConductedEmissionatACpowerline Emissionsinfrequencybands(below1GHz) FCCID:2BSTCH-F3 Emissionsinfrequencybands(above1GHz)