2BSTS-MC400Projector

USB Input USB Output 5V DC 0.5A HDMl lnput ON/OFF IR IR 3.5mm Stereo Jack DC in Open the side cover. Clean the projector by the cotton swab. Reinstall the bottom cover after cleaning. Quick Start Guide Technical Support: for more detailed usage instructions, please download the HP MC400 user manual at https://www.hp-projector.com/support Email:[email protected] Web: www.hp-projector.com Congratulations, and thank you for choosing an HP projector. We wish you an enjoyable and immersive big-screen audiovisual experience. Product I/F Remote Control Package Contents - HP MC400 ◊1 <Accessories> - Power Adapter ◊1 - Power Cord ◊1 - Remote Control ◊1 - Quick Start Guide ◊1 - Warranty Card ◊1 - Product Notice ◊1 - Clean Kit for Optical Engine ◊1 ENEN Usage Tips EN Notice: It is recommended to use an HP-certified 65W USB-C power adapter (or an equivalent adapter with the specifications listed below) Input Power Requirements - Interface: USB Type-C - Protocol: USB Power Delivery (PD) 3.0 - Voltage/Current (MC400): 20V / 2.25A - Voltage/Current (MC425): 20V / 3.25A Power Charger/Power Bank Requirements Specification - Output Interface: USB Type-C - Protocol: USB Power Delivery (PD) 3.0 - Rated Output Power: 65W - Voltage: 20V - Current (MC400): 2.25A - Current (MC425): 3.25A - Tolerance: <±5% * * * Power Supply In addition to the standard power adapter or charger, the MC Series also supports power input via a fast-charging power bank (minimum 65W, 20V/3.25A, not included) through the USB-C port. When using a power bank, ensure it is dedicated exclusively to the projector and not connected to other devices. Power Operation -Power On: Press the power key to turn on the MC400. -Power Off: While the projector is operating, press the power key again to shut it down. Focus Adjustment For a sharp and vivid display, adjust the focus before use. Use the [FOCUS (+)] and [FOCUS (ñ)] buttons on the remote control to fine-tune. A focus icon will appear on the screenóadjust until you achieve the desired clarity. In addition, the MC400 features an autofocus function that automatically adjusts the image. You can enable or disable it by navigating to: Settings Projection Auto Focus. - Helpful Tips for Focus The recommended projection distance for the MC400 is 70 cm to 2 m (2.3ñ6.6 ft), measured from the projector to the screen. EN Optical System Cleaning If spots or blemishes appear on the image, they may be caused by dust inside the optical system. Follow the instructions to open the optical module cover, then use the provided cotton swab from the cleaning kit to gently clean the optical system. * * * * Setting Users can personalize projector settings, including network configuration, Bluetooth pairing, and other advanced system preferences. Advanced Features The MC400 supports auto vertical keystone correction and side projection via 4-point keystone correction. Enable or disable it by navigating to: Setting ɒ Projection ɒ Auto Keystone, then press OK to apply. For manual keystone adjustment, select 4-point Keystone to fine-tune the image alignment. Info. On the Home Page, click Info to view projector details. You can also scan the relevant QR code with your mobile phone to access the user manual and FAQs. Enjoy your MC400! Initial Setup On first use, follow the on-screen instructions to select your preferred language and connect to Wi-Fi. Wi-Fi Setup and Connection If Wi-Fi setup is skipped during the initial setup, you can configure it later by going to: Setting > Wi-Fi > Turn on Wi-Fi > Connect to your network / Add new network EN Start to Use You can browse a wide library of audiovisual content through the pre-installed apps in the App Center or download additional apps from the store. You may also wirelessly mirror your smartphone, connect a computer or DVD player via HDMI, or access multimedia files directly from a USB drive. * * Wi-Fi Projection Note: Ensure that both the MC400 and your device are connected to the same network. - Android Wireless Mirroring: On the Home Page, click Wi-Fi Projection to open the app. Select Android Wireless Mirroring and follow the on-screen instructions. Your Android phone will be prompted to download the Transcreen app. Open the app, select the projector, and tap Connect to start screen sharing. - Miracast Mirroring (for Android Device) On the Home Page, click Wi-Fi Projection to open the app. Select Miracast Mirroring, then use your phoneís mirroring function to search for the projector and start screen sharing. - iOS (Airplay Mirroring): On your iOS device, open the Control Center, select the projector name, then tap Screen Mirroring. - USB connection for Android Wired Mirroring Connect your Android phone to the projectorís USB port using a USB cable. On first connection, your phone will prompt you to download the mirroring app. Once installed, confirm the request in the pop-up window to begin screen sharing. - USB connection for iOS Wired Mirroring Connect your iOS device to the projectorís USB port using a USB cable. After connecting, enter the password to begin screen sharing. EN * ENENEN * * * My Favorite On the Home Page, click My Favorite to open the folder. You can add or remove apps from your Favorites by clicking the [+/ñ] icon. Later, simply tap My Favorite for quick access. Proj. Source In addition to HDMI projection, the MC400 also supports Android/iOS screen mirroring via USB cable. On the Home Page, click Proj-Source and select your preferred connection. - HDMI: Connect your device, such as a notebook or DVD player, to the projector with an HDMI cable to enjoy a larger display. * * ****** USB Input USB Output 5V DC 0.5A HDMl Marche/ArrÍt Infrarouge Infrarouge Prise audio 3,5 mm DC in Ouvrez le capot latÈral. Nettoyez le projecteur avec un coton-tige. Remettez le capot infÈrieur en place aprËs le nettoyage. Guide de dÈmarrage rapide Assistance technique : Pour des instructions díutilisation plus dÈtaillÈes, veuillez tÈlÈcharger le manuel de líutilisate…

Text truncated - open the document above for the full version.

Rev 1/26/2023 (Global Aiptek Inc.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date:12-26-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BSTS-MC400 [Global Aiptek Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Global Aiptek Inc.] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) Christina Twu Rev 1/26/2023 (Global Aiptek Inc.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-26-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BSTS-MC400 [Global Aiptek Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) Christina Twu

Rev 1/26/2023 (Global Aiptek Inc.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12/26/2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2BSTS-MC400 Applicant FRN: 0037614534 [Global Aiptek Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, [Global Aiptek Inc.] is our designated U.S. agent for service of process for the above referenced FCC ID. [Global Aiptek Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Global Aiptek Inc.] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Global Aiptek Inc. U.S. Agent FRN: 0037614534 Address: 2911 N Cicero Ave., Chicago Illinois United States 60641 Contact Person: Christina Twu Tel.: (847)285-1851 Email: [email protected] Sincerely, Global Aiptek Inc. Global Aiptek Inc. Christina Twu Christina Twu [Insert Applicant signature] [U.S. Agent signature]

Global Aiptek Inc. Declaration of Authorization We Name: Global Aiptek Inc. Address: 2911 N Cicero Ave., Chicago Illinois United States 60641 Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3,Jinshagang 1st Road, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s) and signing all the related documents including 731 forms: Product description: Projector Type designation: MC400, X1FR,MC400A,MC400PRO,X1F Pro,X1F Plus Trademark: FCC ID: 2BSTS-MC400 on our behalf. Date:2025-12-26 City: Chicago Name: Christina Twu Function: VP of Producer Center Signature:

Global Aiptek Inc. Date: 2025-12-26 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BSTS-MC400 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description Operation Description for software security The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ----- Christina Twu -------- Grantee Contact’s Signature Global Aiptek Inc.

Model Declaration Letter Date: 2025.12.26 We, the undersigning company Company Name: Global Aiptek Inc. Address: 2911 N Cicero Ave., Chicago Illinois United States 60641 Hereby confirm that the following products: Product description: Projector Type Design: MC400, X1FR, MC400A, MC400PRO, X1F Pro, X1F Plus Brand: The differences of model name show below: Models MC400, X1FR, MC400A, MC400PRO, X1F Pro and X1F Plus are identical except following. Model name and colors are different. Signature: Name: Christina Twu Telephone: +1 8472851851 E-mail: [email protected]

Project No.: 2510C323 Page 2 of 23 Project No.: 2510C323 Page 3 of 23 Project No.: 2510C323 Page 4 of 23 Project No.: 2510C323 Page 5 of 23 Project No.: 2510C323 Page 6 of 23 Project No.: 2510C323 Page 7 of 23 Project No.: 2510C323 Page 8 of 23 Project No.: 2510C323 Page 9 of 23 Project No.: 2510C323 Page 10 of 23 Project No.: 2510C323 Page 11 of 23

A0 初版发行 技术要求: 1.材质：（具体参照CMF文件或者产品BOM） 2.产品表面处理：（具体参照CMF文件或者产品BOM） 3.重点管控尺寸使用“*”标示，未标注尺寸公差参考右公差表 4. 未注尺寸参照3D图档，未注脱模斜度：最大1度 5.所用材料需满足 ROHS 要求 7.工艺要求：1）.产品毛刺 2）.符合材料特性，确保与相关零件配合良好 6.分模线高度不得超出0.03mm. 58.34±0.05 29.34±0.05 �3.16±0.05 �9.84±0.05 217-252801 FCC ID:2BSTS-MC400 Made in Philippines Indoor use only 217-252801 Made in China Indoor use only FCC ID:2BSTS-MC400 1245678910123456789101112 8 910 8 9101112 A G H A A 产品名称: 版本变更履历变更人员变更时间 制作 物料编码 产品图 mm1:1 比例 分发部门： ■ 开发部 ■ 品质部 ■生产部 ■ 采购部 物料名称 产品类型图档类型 审核 核准 文件编号 日期 日期 日期 单位 0.25over 180 0.35 0.50 0.20120-1800.300.40 0.1560-1200.250.35 0.1230-60 0.200.25 0.10 6-30 0.150.20 0.050-60.070.10 `A 参考公差 `B`C 深圳市和天创科技有限公司 消银龙 银底黑字

Project No.: 2510C323 Page 1 of 23 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2510C323 Page 12 of 23 BT Antenna WIFI Antenna Project No.: 2510C323 Page 13 of 23 Project No.: 2510C323 Page 14 of 23 Project No.: 2510C323 Page 15 of 23 Project No.: 2510C323 Page 16 of 23 Project No.: 2510C323 Page 17 of 23 Project No.: 2510C323 Page 18 of 23 Project No.: 2510C323 Page 19 of 23 Project No.: 2510C323 Page 20 of 23 Project No.: 2510C323 Page 21 of 23 Project No.: 2510C323 Page 22 of 23 Project No.: 2510C323 Page 23 of 23

Report No.: BTL-FCCP-5-2510C323 Report Version: R00 Page 1 of 4 FCC RF EXPOSURE REPORT FCC ID: 2BSTS-MC400 Project No. : 2510C323 Equipment : Projector Brand Name : Test Model : MC400 Model Name : MC400, X1FR, MC400A, MC400PRO, X1F Pro, X1F Plus Hardware Version : LCD H726 68356A Software Version : Android 14 Applicant : Global Aiptek Inc. Address : 2911 N Cicero Ave., Chicago, IL, 60641, US Manufacturer : Global Aiptek Inc. Address : 2911 N Cicero Ave., Chicago, IL, 60641, US Factory1 : BO CHENG RUBBER PHILIPPINES INC. Address : BLOCK 5 LOT 3 PHASE 3 LIMA TECHNOLOGY CENTER-SEZ SAN FERNANDO MALVAR BATANGAS, 4233 Philippines Factory2 : Chengdu Hotack Technology Co., Ltd. Address : 501-502, Unit 3, Building 13, No. 666 Jinfenghuang Avenue, High-tech Industry Park, Jinniu District, Chengdu City, Si Chuan Province,China. Date of Receipt : Nov. 03, 2025 Date of Test : Nov. 04, 2025 ~ Dec. 22, 2025 Issued Date : Dec. 25, 2025 Test Sample : Engineering Sample No.: DG92025110336 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091 & KDB 447498 D01 v06 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Chella Zheng Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-5-2510C323 Report Version: R00 Page 2 of 4 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-5-2510C323 R00 Original Report. Dec. 25, 2025 Valid Report No.: BTL-FCCP-5-2510C323 Report Version: R00 Page 3 of 4 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 2. ANTENNA SPECIFICATION For BT/LE: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 WIFI/BT FPC N/A 4.76 Note: The antenna gain is provided by the manufacturer. For 2.4GHz: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 WIFI/BT FPC N/A 3.19 Note: The antenna gain is provided by the manufacturer. For 5GHz: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 WIFI/BT FPC N/A 3.75 Note: The antenna gain is provided by the manufacturer. Report No.: BTL-FCCP-5-2510C323 Report Version: R00 Page 4 of 4 3. CALCULATED RESULT Function Frequency (MHz) Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Ratio Result BT 2480 4.76 2.9923 9.06 8.0538 0.0048 1.0000 0.0048 Pass BLE 2480 4.76 2.9923 9.00 7.9433 0.0047 1.0000 0.0047 Pass Wi-Fi 2.4GHz 2437 3.19 2.0845 17.00 50.1187 0.0208 1.0000 0.0208 Pass Wi-Fi 5GHz 5745 3.75 2.3714 16.83 48.1948 0.0227 1.0000 0.0227 Pass For the max simultaneous transmission MPE: Ratio Total Limit of Ratio Test Result BT 5GHz 0.0048 0.0227 0.0275 1 Complies Note: (1) The calculated distance is 20 cm. (2) Ratio=Power Density (S) (mW/cm 2 )/Limit of Power Density (S) (mW/cm 2 ) End of Test Report

Report No.: BTL-FCCP-4-2510C323 Report Version: R01 Page 1 of 102 FCC Radio Test Report FCC ID: 2BSTS-MC400 This report concerns: Original Grant Project No. : 2510C323 Equipment : Projector Brand Name : Model Name : MC400, X1FR, MC400A, MC400PRO, X1F Pro, X1F Plus Applicant : Global Aiptek Inc. Address : 2911 N Cicero Ave., Chicago, IL, 60641, US Manufacturer : Global Aiptek Inc. Address : 2911 N Cicero Ave., Chicago, IL, 60641, US Factory1 : BO CHENG RUBBER PHILIPPINES INC. Address : BLOCK 5 LOT 3 PHASE 3 LIMA TECHNOLOGY CENTER-SEZ SAN FERNANDO MALVAR BATANGAS, 4233 Philippines Factory2 : Chengdu Hotack Technology Co., Ltd. Address : 501-502, Unit 3, Building 13, No. 666 Jinfenghuang Avenue, High-tech Industry Park, Jinniu District, Chengdu City, Si Chuan Province,China. Date of Receipt : Nov. 03, 2025 Date of Test : Nov. 04, 2025 ~ Jan. 08, 2026 Issued Date : Jan. 12, 2026 Test Sample : Engineering Sample No.: DG92025110336 for power, DG92025110335 for other conducted, DG92025110333 for Radiated 1 GHz to 18 GHz, DG92025110335 for worst case of radiated, DG92025110334 for others. Standard(s) : FCC CFR Title 47, Part 15, Subpart E The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Chella Zheng Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-4-2510C323 Report Version: R01 Page 2 of 102 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-4-2510C323 Report Version: R01 Page 3 of 102 Table of Contents Page REVISION HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 TEST MODES 12 3.3 PARAMETERS OF TEST SOFTWARE 14 3.4 DUTY CYCLE 15 3.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 17 3.6 SUPPORT UNITS 17 3.7 CUSTOMER INFORMATION DESCRIPTION 17 4 . AC POWER LINE CONDUCTED EMISSIONS 18 4.1 LIMIT 18 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 18 4.4 TEST SETUP 19 4.5 EUT OPERATION CONDITIONS 19 4.6 TEST RESULTS 19 5 . RADIATED EMISSIONS 20 5.1 LIMIT 20 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM TEST STANDARD 22 5.4 TEST SETUP 22 5.5 EUT OPERATION CONDITIONS 24 5.6 TEST RESULTS - 9 KHZ TO 30 MHZ 24 5.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 24 5.8 TEST RESULTS - ABOVE 1000 MHZ 24 6 . BANDWIDTH 25 6.1 LIMIT 25 Report No.: BTL-FCCP-4-2510C323 Report Version: R01 Page 4 of 102 Table of Contents Page 6.2 TEST PROCEDURE 25 6.3 DEVIATION FROM STANDARD 25 6.4 TEST SETUP 26 6.5 EUT OPERATION CONDITIONS 26 6.6 TEST RESULTS 26 7 . MAXIMUM OUTPUT POWER 27 7.1 LIMIT 27 7.2 TEST PROCEDURE 27 7.3 DEVIATION FROM STANDARD 27 7.4 TEST SETUP 27 7.5 EUT OPERATION CONDITIONS 27 7.6 TEST RESULTS 27 8 . POWER SPECTRAL DENSITY 28 8.1 LIMIT 28 8.2 TEST PROCEDURE 28 8.3 DEVIATION FROM STANDARD 28 8.4 TEST SETUP 29 8.5 EUT OPERATION CONDITIONS 29 8.6 TEST RESULTS 29 9 . FREQUENCY STABILITY 30 9.1 LIMIT 30 9.2 TEST PROCEDURE 30 9.3 DEVIATION FROM STANDARD 30 9.4 TEST SETUP 30 9.5 EUT OPERATION CONDITIONS 30 9.6 TEST RESULTS 30 10 . MEASUREMENT INSTRUMENTS LIST 31 11 . EUT TEST PHOTOS 34 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 40 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 43 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 48 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 51 Report No.: BTL-FCCP-4-2510C323 Report Version: R01 Page 5 of 102 Table of Contents Page APPENDIX E - BANDWIDTH 86 APPENDIX F - MAXIMUM OUTPUT POWER 93 APPENDIX G - POWER SPECTRAL DENSITY 96 APPENDIX H - FREQUENCY STABILITY 100 Report No.: BTL-FCCP-4-2510C323 Report Version: R01 Page 6 of 102 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-4-2510C323 R00 Original Report. Dec. 25, 2025 Invalid BTL-FCCP-4-2510C323 R01 This report changes are as follow: 1. Revised the test date in page 4…

Text truncated - open the document above for the full version.

Shenzhen Lxc Electronics Technology Co ., Ltd NO.ITEMSDETAILS 1 WIFI-BT 2 2.4G-2.5G/5.15G-5.85G 3 FPC 4 5 RF ME 1. Project brief Shenzhen Lxc Electronics Technology Co ., Ltd 2. Test system and equipment Shenzhen Lxc Electronics Technology Co ., Ltd passive data SWR-WIFI SWR-BT Gain Efficiency FreqEffiGain (MHz)(%)(dBi) 2400 51.342.81 2410 50.32.53 2420 50.02.35 2430 50.12.31 2440 55.32.74 2450 60.383.07 2460 63.823.19 2470 62.922.91 2480 64.112.96 2490 65.432.90 2500 65.832.75 FreqEffiGain (MHz)(%)(dBi) 5150 63.32.52 5350 66.313.46 5550 55.092.81 5650 55.482.76 5850 54.623.75 WIFI-2.4G WIFI-5G FreqEffiGain (MHz)(%)(dBi) 2400 48.944.4 2410 49.414.44 2420 47.414.23 2430 47.684.22 2440 51.934.67 2450 51.334.63 2460 52.934.76 2470 52.964.71 2480 50.234.39 2490 50.864.34 2500 51.224.26 BT-2.4G Apple map direction map WIFI-2.4G BT-2.4G WIFI-5G Active data WiFi(2.4G/B)CHTRP-(11M)TIS-(11M)WiFi(5G/A)CHTRP-(54M)TIS-(54M) 1 16.1 36 14.0 6 15.5 149 16.7 11 15.0-80.0 165 16.0-70.2 B-mode-1 channel data transmission B-modulo-11 channel conducted data

Report No.: BTL-FCCP-1-2510C323 Report Version: R00 Page 30 of 77 13. EUT TEST PHOTO AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-1-2510C323 Report Version: R00 Page 31 of 77 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-1-2510C323 Report Version: R00 Page 32 of 77 Radiated Emissions Test Photos 30 MHz to 1000 MHz Report No.: BTL-FCCP-1-2510C323 Report Version: R00 Page 33 of 77 Radiated Emissions Test Photos Band edge & Harmonic(1 GHz to 18 GHz) Report No.: BTL-FCCP-1-2510C323 Report Version: R00 Page 34 of 77 Radiated Emissions Test Photos Harmonic(18 GHz to 26.5 GHz) Report No.: BTL-FCCP-1-2510C323 Report Version: R00 Page 35 of 77 Conducted Test Photos