2BSV8100FT72LEDLED light

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure require- ment. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operat- ing and installation

Appendix-100Ft/72LED-Photos Page 3 of 10 2. Photographs –Constructional Details 2.1. EUT – External View Model 100Ft/72LED FCC ID: 2BSV8100FT72LED Appendix-100Ft/72LED-Photos Page 4 of 10 Appendix-100Ft/72LED-Photos Page 5 of 10 Appendix-100Ft/72LED-Photos Page 6 of 10 Appendix-100Ft/72LED-Photos Page 7 of 10

Product Name: Smart WiFi Controller For Smart WiFi LED Strip Model: 100Ft/72LED Power: DC 5-24V WiFi: IEEE 802.11 B/G/N 2.4GHz Material: ABS V0 FCC ID: 2BSV8100FT72LED

Appendix-100Ft/72LED-Photos Page 8 of 10 2.2. EUT – Internal View Model 100Ft/72LED FCC ID: 2BSV8100FT72LED Appendix-100Ft/72LED-Photos Page 9 of 10 ANT Appendix-100Ft/72LED-Photos Page 10 of 10 ======End======

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 8 TEST REPORT Referen ce No. .................... : WTN25D09235725W004 FCC ID ................................ : 2BSV8100FT72LED Applicant ............................ : Linghong Lighting Co., Ltd., Address .............................. : No. 1 Qianyang East Road, Dongcheng Town, Linhai City, Zhejiang Province, China Manufacturer .................... : Linghong Lighting Co., Ltd., Address ............................. : No. 1 Qianyang East Road, Dongcheng Town, Linhai City, Zhejiang Province, China Product ............................... : LED light Model(s). ............................ : 100Ft/72LED Standards........................... : FCC 47CFR Part 2 Subpart J Section 2.1091 Date of Receipt Sample .... : 2025-09-05 Date of Test ....................... : 2025-09-19 to 2025-10-14 Date of Issue ...................... : 2025-11-24 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTN25D09235725W004 Page 2 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2. Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2. CONTENTS ............................................................................................................................................................ 2 3. REVISION HISTORY ............................................................................................................................................ 3 4. GENERAL INFORMATION .................................................................................................................................. 4 4.1. GENERAL DESCRIPTION OF E.U.T. ............................................................................................................ 4 4.2. DETAILS OF E.U.T. ..................................................................................................................................... 4 4.3. TEST FACILITY ............................................................................................................................................ 5 4.4. SUBCONTRACTED ....................................................................................................................................... 5 4.5. ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 5 5. TEST SUMMARY .................................................................................................................................................. 6 6. RF EXPOSURE ...................................................................................................................................................... 7 6.1. REQUIREMENTS .......................................................................................................................................... 7 6.2. THE PROCEDURES / LIMIT ........................................................................................................................... 7 6.3. MPE CALCULATION METHOD .................................................................................................................... 8 6.4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ......................................................................... 8 Reference No.: WTN25D09235725W004 Page 3 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 3. Revision History Test Report No. Date of Receipt Sample Date of Test Date of Issue Purpose Comment Approved WTN25D09235725W004 2025-09-05 2025-09-19 to 2025-10-14 2025-11-24Original - Valid Reference No.: WTN25D09235725W004 Page 4 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4. General Information 4.1. General Description of E.U.T. Product: LED light Model(s): 100Ft/72LED Model Description: N/A Test Sample No.: 1-1/1 Bluetooth Version: 5.1 Wi-Fi Specification: 2.4G-802.11b/g/n HT20 Hardware Version: 2.3 Software Version: 1.5.2 4.2. Details of E.U.T. Operation Frequency: BLE: 2402-2480MHz, 40 Channels in total Wi-Fi: 802.11b/g/n HT20: 2412~2462MHz, 11CH Max. RF output power: BLE: 4.77dBm Wi-Fi: 14.70dBm Modulation Technology: BLE: GFSK Wi-Fi: DSSS, OFDM Antenna installation: PCB Antenna Antenna Gain: 1.39dBi Note: #: The antenna gain is provided by the applicant, and the applicant should be responsible for its authenticity, WALTEK lab has not verified the authenticity of its information. Ratings: Remote controller: CR2025, DC 3V Light: DC 24V, 1.5A charging from adapter Adapter: Light: Model: ZL-E040W2401500 Input: 100-240V~, 50/60Hz, 1.0A Output: 24V 1.5A Manufacturer: UPRITE ELECTRONIC CO.,LTD Reference No.: WTN25D09235725W004 Page 5 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4.3. Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0013. Test Firm Registration No.: 7760A. Waltek Testing Group Co., Ltd. Has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration number 7760A, October 15, 2016. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. Waltek Testing Group Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Comm…

Text truncated - open the document above for the full version.

Antenna describe 1. Antenna describe: Antenna plate PCB ANTENNA Make name/model name 2#_2811CW_1KEY_V2.3_ Antenna gain 1.39dBi Frequency range 2.4GHZ-2.483GHZ Connector type direct Manufacturer Name: Shenzhen CoreAPT Technology.CO.,LTD ManufactureAddress: Room 407, BuilGing B, 368 Dong' an NoUth RoaG, Guzhen Town, Zhongshan City 2.External view drawing: Picture of antenna 3.Antenna Radiation Pattern Unit (mm) Phi02D Phi902D Theta902D 2400MHz3D 2450MHz3D 2500MHz3D 5

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 40 TEST REPORT Referen ce No. .................... : WTN25D09235725W002 FCC ID ................................ : 2BSV8100FT72LED Applicant ............................ : Linghong Lighting Co., Ltd., Address .............................. : No. 1 Qianyang East Road, Dongcheng Town, Linhai City, Zhejiang Province, China Manufacturer .................... : Linghong Lighting Co., Ltd., Address ............................. : No. 1 Qianyang East Road, Dongcheng Town, Linhai City, Zhejiang Province, China Product ............................... : LED light Model(s). ............................ : 100Ft/72LED Standards........................... : FCC 47CFR Part 15.247 Date of Receipt Sample .... : 2025-09-05 Date of Test ....................... : 2025-09-19 to 2025-10-14 Date of Issue ...................... : 2025-11-24 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTN25D09235725W002 Page 2 of 40 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 4 4 GENERAL INFORMATION ....................................................................................................................... 5 4.1 General Description of E.U.T. ....................................................................................................... 5 4.2 Details of E.U.T. ............................................................................................................................ 5 4.3 Channel List .................................................................................................................................. 6 4.4 Test Facility ................................................................................................................................... 6 4.5 Subcontracted ............................................................................................................................... 6 4.6 Abnormalities from Standard Conditions ...................................................................................... 6 4.7 Test Mode ..................................................................................................................................... 7 5 TEST SUMMARY ...................................................................................................................................... 8 6 EQUIPMENT USED DURING TEST ......................................................................................................... 9 6.1 Equipments List ............................................................................................................................ 9 6.2 Description of Support Units ....................................................................................................... 10 6.3 Measurement Uncertainty .......................................................................................................... 10 6.4 Test Equipment Calibration ........................................................................................................ 10 7 DUTY CYCLE .......................................................................................................................................... 11 8 CONDUCTED EMISSION ....................................................................................................................... 12 8.1 E.U.T. Operation ......................................................................................................................... 12 8.2 EUT Setup .................................................................................................................................. 12 8.3 Measurement Description ........................................................................................................... 12 8.4 Conducted Emission Test Result ............................................................................................... 13 9 RADIATED EMISSIONS ......................................................................................................................... 15 9.1 EUT Operation ............................................................................................................................ 15 9.2 Test Setup .................................................................................................................................. 16 9.3 Spectrum Analyzer Setup ........................................................................................................... 17 9.4 Test Procedure ........................................................................................................................... 18 9.5 Corrected Amplitude & Margin Calculation ................................................................................ 18 9.6 Summary of Test Results ........................................................................................................... 19 10 CONDUCTED SPURIOUS EMISSIONS…

Text truncated - open the document above for the full version.

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 49 TEST REPORT Referen ce No. .................... : WTN25D09235725W003 FCC ID ................................ : 2BSV8100FT72LED Applicant ............................ : Linghong Lighting Co., Ltd., Address .............................. : No. 1 Qianyang East Road, Dongcheng Town, Linhai City, Zhejiang Province, China Manufacturer .................... : Linghong Lighting Co., Ltd., Address ............................. : No. 1 Qianyang East Road, Dongcheng Town, Linhai City, Zhejiang Province, China Product ............................... : LED light Model(s). ............................ : 100Ft/72LED Standards........................... : FCC 47CFR Part 15.247 Date of Receipt Sample .... : 2025-09-05 Date of Test ....................... : 2025-09-19 to 2025-10-14 Date of Issue ...................... : 2025-11-24 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTN25D09235725W003 Page 2 of 49 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 4 4 GENERAL INFORMATION ....................................................................................................................... 5 4.1 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................... 5 4.2 DETAILS OF E.U.T. .............................................................................................................................. 5 4.3 CHANNEL LIST ..................................................................................................................................... 5 4.4 TEST FACILITY .................................................................................................................................... 6 4.5 SUBCONTRACTED ................................................................................................................................ 6 4.6 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 6 4.7 TEST MODE ........................................................................................................................................ 7 5 TEST SUMMARY ...................................................................................................................................... 8 6 EQUIPMENT USED DURING TEST ......................................................................................................... 9 6.1 EQUIPMENTS LIST ............................................................................................................................... 9 6.2 DESCRIPTION OF SUPPORT UNITS ...................................................................................................... 10 6.3 MEASUREMENT UNCERTAINTY ........................................................................................................... 10 6.4 TEST EQUIPMENT CALIBRATION ......................................................................................................... 10 7 DUTY CYCLE .......................................................................................................................................... 11 8 CONDUCTED EMISSION ....................................................................................................................... 12 8.1 E.U.T. OPERATION ............................................................................................................................ 12 8.2 EUT SETUP ...................................................................................................................................... 12 8.3 MEASUREMENT DESCRIPTION ............................................................................................................ 12 8.4 CONDUCTED EMISSION TEST RESULT ................................................................................................ 13 9 RADIATED EMISSIONS ......................................................................................................................... 15 9.1 EUT OPERATION ............................................................................................................................... 15 9.2 TEST SETUP ..................................................................................................................................... 16 9.3 SPECTRUM ANALYZER SETUP ............................................................................................................ 17 9.4 TEST PROCEDURE ............................................................................................................................. 18 9.5 CORRECTED AMPLITUDE & MARGIN CALCULATION .............................................................................. 18 9.6 SUMMARY OF TEST RESULTS ............................................................................................................. 19 1…

Text truncated - open the document above for the full version.

Appendix-100Ft/72LED-Photos Page 1 of 10 1. Test Setup photos Model 100Ft/72LED FCC ID: 2BSV8100FT72LED 1.1 Photograph – Conducted Emission For Conducted Emission Test Site 2# 1.2 Photograph – Radiated Emissions For 9kHz-30MHz Test Site 2# Appendix-100Ft/72LED-Photos Page 2 of 10 For 30MHz-1000MHz Test Site 2# For Above 1GHz Test Site 1#