2BSVE-FSC1SAFlowtica Scribe Case

Quick Start Guide Product Overview Binding and Connection Start & End RecordingFlowMark™How to Use To Write: Rotate the pen cone clockwise until the tip is fully extended. To Store: Rotate the pen cone counter-clockwise to protect the tip. To Replace Refill: Keep rotating counter-clockwise to unscrew the pen cone. Short press to timestamp a key point. Press and hold to highlight a recording segment. Open the case and remove the activation strip of Scribe. The LED will breathe white, indicating the charging case is ready to connect. Open the Flowtica app and follow the on-screen instructions to complete the binding process. White pulsing - ready to pair Solid Green - fully charged Blinking Amber - attention required · The Scribe is charging, the charging case is charging, or the battery is low (insufficient to fully charge the Scribe once). Start End Press & Hold Single Vibration Press & Hold Double Vibration Indicator Light Download Flowtica App *Scan the QR code to download Flowtica app. Record Button FlowMark™ Button Microphone For additional support, please visit support.flowtica.ai or email us at [email protected] Charging Contacts Indicator Light Spare Tip Holder Indicator Light Charging Pins USB-C Input Button Charging CaseScribe Download APK Directly White pulsing - ready to pair Red flashing - recording in progress with sufficient battery Amber flashing - recording in progress with low battery Solid Green - fully charged Cyan flashing - firmware update in progress Purple light - storage full ScribeCharging Case 12-Month Worry-Free Warranty Operating Environment, Storage & Transportation Conditions Operating Conditions Thank you for choosing Flowtica Scribe! We are honored to have you as our customer and are committed to providing you with the best experience possible. We offer a 12-month (or longer if required by the local consumer protection laws) worry-free warranty for the Flowtica Scribe from the date of original purchase. ·During the warranty period, if a defect arises in Flowtica Scribe, Flowtica will, at its option, repair or replace the defective product at no charge to the customer. · To obtain warranty service, you must contact Flowtica customer support at [email protected], provide proof of purchase, and return the product in accordance with the instructions provided by Flowtica support. · This warranty does not apply to: - The Flowtica Scribe is not purchased through an authorized Flowtica sales channel. - The Flowtica Scribe has been opened, repaired, maintained, resold, or modified without permission. - The Flowtica Scribe’s failure is due to force majeure, misuse, abuse, neglect, accident, or improper storage or maintenance. - The Flowtica Scribe’s failure is due to use not in accordance with the instructions. - The Flowtica Scribe is damaged by external factors (such as liquid, fire, or other causes) due to improper storage or faults and negligence. - The Flowtica Scribe’s serial number has been altered or removed. - The Flowtica Scribe is used for commercial or other non-personal use, including but not limited to rental, testing, or business purposes. - Normal wear and tear. - Damage caused by human actions, animals, pests, or other external factors. If you encounter any problems using Flowtica Scribe, please contact us at [email protected]. To ensure proper operation, performance, and product longevity, the Flowtica Scribe must be used, stored, and transported under the following environmental conditions. - Operating Temperature: 0°C to 35°C - Operating Humidity: 10% to 90% RH (non-condensing) - Maximum Operating Altitude: 2,000 meters above sea level Product Privacy & Disclaimer Privacy Policy Privacy Protection We value your information privacy. For more details, please visit https://www.flowtica.ai/policies/privacy-policy Regarding data safety uploaded to the cloud or phone: - If you do not use the cloud services, all recordings will only be stored locally on your phone. - If you choose to use the cloud services, all uploaded data are encrypted and actively protected. FCC Regulatory Conformance FCC ID: 2BSVE-FSC1SA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. IC Statement: CAN ICES-3(B)/NMB-3(B) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. Le dispositif a été évalué pour répondre aux exigences générales en matière d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an…

Text truncated - open the document above for the full version.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:YangyangXu TelephoneNo:561-875-9826 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenDeltronIntelligentInnovationTechnologyCo.,Ltd. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenDeltronIntelligentInnovationTechnologyCo.,Ltd. ProductDescription:FlowticaScribeCase FRN:0037624509 GranteeCode:2BSVE FCCID:2BSVE-FSC1SA ContactName:NicoleLiu Address:RM501,BLK10,DreamworkNorthQianhaiSZ-HK,NanshanDistrict,Shenzhen TelephoneNo:18923456567 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2026/1/31 Applicant’sName: ShenzhenDeltronIntelligentInnovation TechnologyCo.,Ltd. USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:ManagerTitle:Manager SignatureSignature

Rev 1/26/2023 Shenzhen Deltron Intelligent Innovation Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 24, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BSVE-FSC1SA [Shenzhen Deltron Intelligent Innovation Technology Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Deltron Intelligent Innovation Technology Co., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24- 886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Nicole Liu Rev 1/26/2023 Shenzhen Deltron Intelligent Innovation Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 24, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BSVE-FSC1SA [Shenzhen Deltron Intelligent Innovation Technology Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Nicole Liu

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Deltron Intelligent Innovation Technology Co., Ltd. Date: Jan. 24, 2026 Product Model Number: FSC1SRUS/A FCC ID: 2BSVE-FSC1SA To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 18923456567 On behalf of: Shenzhen Deltron Intelligent Innovation Technology Co., Ltd.

Shenzhen Deltron Intelligent Innovation Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 31, 2026 Subject; Request for Confidentiality FCC ID: 2BSVE-FSC1SA To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Nicole Liu Title: Manager

Shenzhen Litongchuang Technology Co., Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± SCALE：N/AUNIT：mm These drawings and specifications are the property of Litongchuang Technology Limited and shall not be reproduced or used as a basis for the manufacture or sale of instruments or equipment without permission DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE： LTC2- 2405-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 SPECIFICATIONS Ceramic Antenna LTC-3216MLT CUSTOMER: DESCRIPTION: CUSTOMER PART No: OUR MODEL NO: DATE: PLEASE RETURN TO US ONE COPY OF “SPECIFICATION FOR APPROVAL” WITH YOUR APPROVED SIGNATURES CheckMai wencaiAudit Kang zhongzhu makeHuang ruile The customer acknowledges the signature and seal. Date Shenzhen Litongchuang Technology Co., Ltd. No. 603, Shenghuihui Commercial Building, Jinhai Road, Yantian Community, Xixiang Street, Bao'an District, Shenzhen City Shenzhen Litongchuang Technology Co., Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± SCALE：N/AUNIT：mm These drawings and specifications are the property of Litongchuang Technology Limited and shall not be reproduced or used as a basis for the manufacture or sale of instruments or equipment without permission DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE： LTC2- 2405-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 LTC-3216MLT Specification Operating Temp. : -40°C~+85°C 1. FEATURES : ●Light weight, compact ●Wide bandwidth, low cost ●Built-in antenna with high gain 2. APPLICATIONS : ●Bluetooth, Wireless LAN, Mobile TV ●Home RF System, etc 3. PRODUCT IDENTIFICATION (1)(2)(3) (1) Product type: Multilayer chip Antenna (2) Center Frequency: 2450MHz (3) External Dimensions (L×W) (mm): 3.2*1.6 4. SHAPE AND DIMENSIONS: LWHA 3.2±0.21.6±0.20.52±0.10.4±0.1 LT C240 532 2 16 Shenzhen Litongchuang Technology Co., Ltd. Shenzhen Litongchuang Technology Co., Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± SCALE：N/AUNIT：mm These drawings and specifications are the property of Litongchuang Technology Limited and shall not be reproduced or used as a basis for the manufacture or sale of instruments or equipment without permission DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE： LTC2- 2405-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 Unit： mm Shenzhen Litongchuang Technology Co., Ltd. ANT Laying copper on the bottom layer Top layer coated with copper Shenzhen Litongchuang Technology Co., Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± SCALE：N/AUNIT：mm These drawings and specifications are the property of Litongchuang Technology Limited and shall not be reproduced or used as a basis for the manufacture or sale of instruments or equipment without permission DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE： LTC2- 2405-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 Piercing reference diagram APPLICATION GUIDE 5. SPECIFICATIONS: * Test condition: Test board size 90*40 mm Matching circuit: Pi matching circuit will be required Shenzhen Litongchuang Technology Co., Ltd. ANT Laying copper on the bottom layer Top layer coated with copper punching Test Item specification bandwidth polarization mode Max dbi efficiency input impedance linear polarization Shenzhen Litongchuang Technology Co., Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± SCALE：N/AUNIT：mm These drawings and specifications are the property of Litongchuang Technology Limited and shall not be reproduced or used as a basis for the manufacture or sale of instruments or equipment without permission DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE： LTC2- 2405-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 6. Electrical Characteristics : RL (return loss) VSWR MarkFrequencyVSWR 12400 MHz1.513 22440 MHz1.068 32480 MHz1.464 Shenzhen Litongchuang Technology Co., Ltd. Shenzhen Litongchuang Technology Co., Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± SCALE：N/AUNIT：mm These drawings and specifications are the property of Litongchuang Technology Limited and shall not be reproduced or used as a basis for the manufacture or sale of instruments or equipment without permission DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE： LTC2- 2405-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 Radiation Pattern The Gain pattern is measured in FAR-field chamber. DUT is placed on the table of rotator,a standard horn antenna and Vector Network Analyzer is used to collect data. ◎efficiency maximum gain Shenzhen Litongchuang Technology Co., Ltd. Shenzhen Litongchuang Technology Co., Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± SCALE：N/AUNIT：mm These drawings and specifications are the property of Litongchuang Technology Limited and shall not be reproduced or used as a basis for the manufacture or sale of instruments or equipment without permission DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE： LTC2- 2405-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 ◎3D Gain Pattern (2400 MHz) ◎3D Gain Pattern (2440 MHz) ◎3D Gain Pattern (2480 MHz) Shenzhen Litongchuang Technology Co., Ltd. Shenzhen Litongchuang Technology Co., Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± SCALE：N/AUNIT：mm These drawings and specifications are the property of Litongchuang Technology Limited and shall not be reproduced or used as a basis for the manufacture or sale of instruments or equipment without permission DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE： LTC2- 2405-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 7. Environmental Characteristics (1) Reliability Test (2) Storage Condition (a) At warehouse: The temperature should be within 0 ~ 30°…

Text truncated - open the document above for the full version.

Ext Photos Model: FSC1S/A Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

Int Photos Model: FSC1S/A Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 ANT Photo 7 Photo 8

- Page 1 of 9 - Report No.: HB20251230008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Flowtica Scribe Case Trade Mark: N/A Model Number: FSC1S/A FCC ID: 2BSVE-FSC1SA Prepared for Shenzhen Deltron Intelligent Innovation Technology Co., Ltd. RM501, BLK 10, Dreamwork North Qianhai SZ-HK, Nanshan District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 9 - Report No.: HB20251230008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 7 4 RF EXPOSURE .................................................................................................................................................. 8 4.1 STANDALONE SAR TEST EXCLUSION CONSIDERATIONS........................................................................................................ 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Result ................................................................................................................................................... 9 - Page 3 of 9 - Report No.: HB20251230008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Deltron Intelligent Innovation Technology Co., Ltd. Address ................................. : RM501, BLK 10, Dreamwork North Qianhai SZ-HK, Nanshan District, Shenzhen Manufacturer's Name .......... : FLOWTICA AI PTE. LTD. Address ................................. : 112 ROBINSON ROAD #03-01 ROBINSON 112, SG, SG, 068902 Product description Product name ........................ : Flowtica Scribe Case Model Number ....................... : FSC1S/A Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 447498 D01 General RF Exposure Guidance v06 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Jan. 04, 2026~Jan. 24, 2026 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 9 - Report No.: HB20251230008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Jan. 24, 2026 Original - Page 5 of 9 - Report No.: HB20251230008E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com 1 General Description 1.1 Description of EUT Product name: Flowtica Scribe Case Model name: FSC1S/A Series Model: N/…

Text truncated - open the document above for the full version.

- Page 1 of 53 - Report No.: HB20251230008E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Flowtica Scribe Case Trade Mark: N/A Model Number: FSC1S/A FCC ID: 2BSVE-FSC1SA Prepared for Shenzhen Deltron Intelligent Innovation Technology Co., Ltd. RM501, BLK 10, Dreamwork North Qianhai SZ-HK, Nanshan District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 53 - Report No.: HB20251230008E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 6 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 6 1.2 TEST MODE .............................................................................................................................................................. 6 1.3 OPERATION CHANNEL LIST ........................................................................................................................................... 7 1.4 TEST SETUP .............................................................................................................................................................. 7 1.5 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 7 1.6 ANCILLARY EQUIPMENT .............................................................................................................................................. 7 2 SUMMARY OF TEST RESULT ............................................................................................................................. 8 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 9 3.1 TEST LABORATORY ................................ ..................................................................................................................... 9 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 9 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 9 3.4 TEST SOFTWARE ...................................................................................................................................................... 10 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 11 5 TEST ITEM AND RESULTS ............................................................................................................................... 13 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 13 5.1.1 Standard Requirement ............................................................................................................................. 13 5.1.2 Test Result ................................................................................................................................................. 13 5.2 CONDUCTED EMISSION ............................................................................................................................................. 14 5.2.1 Limits ................................ ........................................................................................................................ 14 5.2.2 Test Procedures ......................................................................................................................................... 14 5.2.3 Test Setup.................................................................................................................................................. 15 5.2.4 Test Result ................................................................................................................................................. 15 5.3 RADIATED EMISSION ................................................................................................................................................ 18 5.3.1 Limits ........................................................................................................................................................ 18 5.3.2 Test Procedures ......................................................................................................................................... 18 5.3.3 Test Setup.................................................................................................................................................. 18 5.3.4 Test Result …

Text truncated - open the document above for the full version.