2BSYH-KS6-10WSolid State Wireless Magnetic Power Bank

Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. p 1 / 2 63_Compliance proof covered list - 2.911(d)(5)(i) and (ii) - software_V02 12/30/2025 --- Covered List Software Incapability 1 --- Device (model name): KS6-10W Grantee: Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. FCC ID: 2BSYH-KS6-10W Device features: Operating System (as applicable): NA Storage Capacity (hard drive or other permanent memory storage): NA Is installation of third-party software possible? YES NO Does the device have an internet connection? YES NO Can the device connect to a PC? YES NO Chipset/module information: Chipset / module part number: Memory size (MB) SC5008 NA Minimum system requirements Kaspersky as of December 3, 2024 Android Memory: 120 MB Disc space: unknown Processor speed: unknown MacOS Memory: 2000 MB Disc space: 2200 MHz Processor speed: unknown Windows Memory: 1000 MB Disc space: 1000 MB Processor speed: 1 GHz Linux Memory: 1000 MB Disc space: 1000 MHz Processor speed: 1 GHz Based on the review of the above factsheet(s) and device features, the device cannot support installation of any cybersecurity or anti-virus software on the covered list. potentially can operate with any cybersecurity or anti-virus software on the covered list – additional 3 rd party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – page 2 of this document applies. Signature: Name: Jie Liu Title/Position: Product Manager 1 List of minimum requirements to implement covered list software – if the EUT does not have capability to install Kaspersky under the given configuration. Page 2 must also be handed in. Note: If the device is capable of running Kaspersky software, at least one document must be provided from a third party showing that the Kaspersky software is not present on the device. This could include the results of a software scan, a screen capture of the device software register or other objective evidence that proves the Kaspersky software is not on the device. Please follow options listed on page 2. Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. p 2 / 2 63_Compliance proof covered list - 2.911(d)(5)(i) and (ii) - software_V02 - Options to provide of compliance with covered list software requirements - Please fill in as applicable and provide additional proof as requested: 1 Has the client signed an attestation stating the device is incapable of running the Kaspersky software (page 1)? * YES – no more proof needed – 2-5 do not apply > N/A ** NO – more proof must be provided (item 2-5 must be answered) YES* NO** 2 Did the test lab or other 3rd party other than the certification body and applicant provide a list of software installed on the device and is there no evidence of Kaspersky software being installed? ***YES – please: YES*** NO N/A Insert File Name: Insert 3 rd Party Name: 3 Have the results of a software scan been provided showing that Kaspersky software is not installed on the device? ***YES – please: YES*** NO N/A Insert File Name: Insert 3 rd Party Name: 4 Has any other objective evidence that Kaspersky software is not installed on the device been provided? ***YES – please: YES*** NO N/A Insert File Name: Insert 3 rd Party Name: 5 Has at least one of the above items been shown as a YES? **** NO – applicant failed to provide sufficient proof – application filing is rejected. YES NO**** Note: Files containing confidential operational details can be kept long-term confidential on applicant’s request.

Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. 2025/12/30 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for 2BSYH-KS6-1 0W [Shenzhen Hongruiteng Supply Chain Management Co.,Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successo rs and assignees, which is also on the “covered list”. Sincerely, Name: jie Liu Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. 2025/12/30 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for 2BSYH-KS6-10W [Shenzhen Hongruiteng Supply Chain Management Co.,Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entit y producing “covered” equipment. Sincerely, Name: jie Liu

Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. 2025/12/30 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR Product Name: Solid State Wireless Magnetic Power Bank FCCID: 2BSYH-KS6-10W Model(s): KS6-10W To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the -Block Diagram -Schematics -Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : jie Liu / Product Manager Contact information / address: Shenzhen Hongruiteng Supply Chain Management Co.,Ltd./ 502,Bldg 2,No.2 Chongqing Rd,Qiaotou Community,Fuhai St,Bao'an,Shenzhen, China,518000

Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. 2025/12/30 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION Product Name: Solid State Wireless Magnetic Power Bank FCCID: 2BSYH-KS6-10W Model(s): KS6-10W To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : jie Liu / Product Manager Contact information / address: Shenzhen Hongruiteng Supply Chain Management Co.,Ltd./ 502,Bldg 2,No.2 Chongqing Rd,Qiaotou Community,Fuhai St,Bao'an,Shenzhen, China,518000

External Photos

Internal Photos ANT

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. MPE Test Report Report No.: STS2512359H01 Issued for Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. 502,Bldg 2,No.2 Chongqing Rd,Qiaotou Community,Fuhai St,Bao'an,Shenzhen, China,518000 Product Name: Solid State Wireless Magnetic Power Bank Brand Name: N/A Model Name: KS6-10W Series Model(s): N/A FCC ID: 2BSYH-KS6-10W Test Standard: FCC CFR 47 part 1, 1.1310 Page 2 of 17 Report No.: STS2512359H01 TEST RESULT CERTIFICATION Applicant’s Name ................... : Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. Address ................................. : 502,Bldg 2,No.2 Chongqing Rd,Qiaotou Community,Fuhai St,Bao'an,Shenzhen, China,518000 Manufacturer's Name ............. : Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. Address ................................. : 502,Bldg 2,No.2 Chongqing Rd,Qiaotou Community,Fuhai St,Bao'an,Shenzhen, China,518000 Product Description Product Name ........................ : Solid State Wireless Magnetic Power Bank Brand Name ........................... : N/A Model Name ........................ : KS6-10W Series Model(s) ...................... : N/A Standards .............................. : FCC CFR 47 part 1, 1.1310 Test Procedure ..................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ............................ : Date of receipt of test item ..... : 05 Dec. 2025 Date of performance of tests .. : 05 Dec. 2025 to 23 Dec. 2025 Date of Issue .......................... : 23 Dec. 2025 Test Result ............................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 17 Report No.: STS2512359H01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 5 1.1 TEST FACTORY 5 1.2 MEASUREMENT UNCERTAINTY 5 1.3 GENERAL DESCRIPTION OF THE EUT 6 1.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 7 1.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 7 2. COIL SPECIFICATIONS 8 2.1 COIL SIZE 8 2.2 LOCATION(S) – COIL TO THE OUTER SURFACE OF THE ENCLOSURE(S) 8 3. MAXIMUM PERMISSIBLE EXPOSURE 9 3.1MEASURING STANDARD 9 3.2 REQUIREMENTS 9 3.3TEST PROCEDURE 11 3.4 TEST SETUP 11 3.5 TEST RESULTS 12 3.6 MAXIMUM PERMISSIBLE EXPOSURE 14 Page 4 of 17 Report No.: STS2512359H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 23 Dec. 2025 STS2512359H01 ALL Initial Issue Page 5 of 17 Report No.: STS2512359H01 1. SUMMARY OF TEST RESULTS 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainly 1 H-filed ±0.83dB 2 E-filed ±0.91dB Page 6 of 17 Report No.: STS2512359H01 1.3 GENERAL DESCRIPTION OF THE EUT Product Name Solid State Wireless Magnetic Power Bank Brand N/A Model Number KS6-10W Series Model(s) N/A Model Difference N/A Equipemnt Category Non-ISM frequency Antenna Type loop coil antenna Operating frequency 112-205KHz Modulation Type ASK Power Rating Type-C Input: DC 5V/2A,9V/2A,12V/1.5A,18W(MAX) Type-C Output: DC 5V/3A,9V/2.22A,12V/1.67A, 10V/2.25A(SCP),22.5W(MAX) Type-A Output: DC 5V/3A,9V/2A,12V/1.5A, 10V/2.25A(SCP),22.5W(MAX) Wireless Output: 5W,7.5W,10W,15W Adapter N/A Battery DC 3.85V,10000mAh Wireless charging power 15W Max Hardware version number N/A Software version number N/A Connecting I/O Port(s) Please refer to the Note 1. Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User Manual. 2. Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector NOTE 1 N/A N/A Coil N/A Antenna The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. Page 7 of 17 Report No.: STS2512359H01 1.4 DESCRIPTION OF THE TEST MODES Equipment under test was operated during the measurement under the following conditions: Test Mode Description Mode 1 AC Adapter + EUT + Load(5W) (Battery Status: < 1%) Record Mode 2 AC Adapter + EUT + Load(5W) (Battery Status: < 50%) Record Mode 3 AC Adapter + EUT + Load(5W) (Battery Status: < 99%) Record Mode 4 EUT + Load(15W) (Battery Status: < 1%) Record Mode 5 EUT + Load(15W) (Battery Status: < 50%) Pre-tested Mode 6 EUT + Load(15W) (Battery Status: < 99%) Pre-tested Mode 7 Test the EUT in idle mode. Pre-tested Note: All test modes were pre-tested, but we only recorded the worst case in this report. 1.5 EQUIPMENTS LIST FOR ALL TEST ITEMS Kind of Equipment Manufacturer Type No. Serial No. Last calibration Calibrated until Electric and Magnetic field Probe - Analyzer Narda EHP 200A 180ZX10220 2025.02.22 2026.02.21 1.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS Item Equipment Mfr/Brand Model/Type No. Note E-1 Adapter ZTC NB-A515A N/A E-2 Load N/A N/A N/A Item Shielded Type Ferrite Core Length Note C-1 N/A N/A 0.8m N/A Note: (1) For detachable type I/O cable should be specified the length in cm in『Length』column. (2) “YES” is means “with core”; “NO” is means “without core”. Page 8 of …

Text truncated - open the document above for the full version.

Dongguan City Xinwang Coil Technology Co., Ltd Add: Room 601, Building 2, No. 92, Xinxing Road, Hengtang Industrial Zone, Tangxia Town, Dongguan City Tel: 13662722286 Fax: SPECIFICATION APPROVAL CUSTOMER: Shenzhen Hancaiwei Electronics Co.,Ltd Product Name of Customer: Coil Module Product Name of Ours(Material): Coil Module APPROVED: APPROVED: DRAWN: Wang Xingwang DATE: 2025-7-2 Page 1 of 4 Specification CUSTOM P/N: Coil Module PART NUMBER： 1.DIMENSIONS：mm A 5.3±0.5 B 13.4±0.5 C 39±1 D 43.5±0.5 E 39±1 F 2-5 G Total Thickness 1.5MAX H Disk Thickness 0.6±0.1 I J k L M N O R Q P Note:Attach genuine 3M 9448 adhesive to the coil surface APPROVED BY CHECKED BY PREPARED BY DATE PAGE Huang Yanping Wang Xingwang 2025-7-2 2 of 4 Specification CUSTOM P/N: Coil Module PART NUMBER： 5.WINDING DETAILS： Wdg.NO. Start Finish Turns Wire Dia Wdg.Type:Spread/Loose Wdg.Direct ion Layer/Turns per layer S F 13TS 0.08*24*2P Loose Counte rclock wise 1 Layer / 13 TS 6.ELECTRICAL CHARACTERISTICS： PARAMETERS UNIT LIMTI Inductance ls@100KHz/1v UH 8.0UH±10% Q @100KHz/1v 30MIN DCR @100KHz/1v Ω 0.2MAX APPROVED BY CHECKED BY PREPARED BY DATE PAGE Huang Yanping Wang Xingwang 2025-7-2 3 of 4 MATERIAL LIST CUSTOM P/N: Coil Module PART NUMBER： NO. Material name Description Manufacturer Material 1 Hot Air Twisted Wire 0.08*24*2P 99.95% Pure Copper 2 Lead-Free Solder Bar High Temperature 3 High-Temperature Adhesive Tape Gold Finger 6mm 4 Adhesive Resin Adhesive 5 Magnetic Sheet 43.5*5.3*0.6MM Ferrite, Mn-Zn PC40 6 3M Double-Sided Adhesive Tape 42*9*0.15 Tearable Backing 7 EPE Foam 270*380*55 8 Carton Box 280*390*190 APPROVED BY CHECKED BY PREPARED BY DATE PAGE Huang Yanping Wang Xingwang 2025-7-2 4 of 4

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2512359W01 Issued for Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. 502,Bldg 2,No.2 Chongqing Rd,Qiaotou Community,Fuhai St,Bao'an,Shenzhen, China,518000 Product Name: Solid State Wireless Magnetic Power Bank Brand Name: N/A Model Name: KS6-10W Series Model(s): N/A FCC ID: 2BSYH-KS6-10W Test Standards: FCC Part 15 Subpart C Page 2 of 21 Report No.: STS2512359W01 TEST REPORT Applicant’s Name ................... : Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. Address ................................. : 502,Bldg 2,No.2 Chongqing Rd,Qiaotou Community,Fuhai St,Bao'an,Shenzhen, China,518000 Manufacturer's Name ............. : Shenzhen Hongruiteng Supply Chain Management Co.,Ltd. Address ................................. : 502,Bldg 2,No.2 Chongqing Rd,Qiaotou Community,Fuhai St,Bao'an,Shenzhen, China,518000 Product Description Product Name ........................ : Solid State Wireless Magnetic Power Bank Brand ..................................... : N/A Model Number ....................... : KS6-10W Series Model(s)...................... : N/A Test Standards ..................... : FCC Part 15 Subpart C Test Procedure ...................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ...............................: Date of receipt of test item ..........: 05 Dec. 2025 Date (s) of performance of tests .: 05 Dec. 2025 to 23 Dec. 2025 Date of Issue ............................. : 23 Dec. 2025 Test Result ..................................: Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 21 Report No.: STS2512359W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 5 1.1 TEST FACTORY 5 1.2 MEASUREMENT UNCERTAINTY 5 2. GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF THE EUT 6 2.2 DESCRIPTION OF THE TEST MODES 7 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 9 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 3. CONDUCTED EMISSION TEST RESULT (SECTION 15.207) 11 3.1 POWER LINE CONDUCTED EMISSION LIMITS 11 3.2 TEST PROCEDURE 12 3.3 TEST SETUP 12 3.4 EUT OPERATING CONDITIONS 12 3.5 TEST RESULTS 13 4. RADIATED& FIELD EMISSION TEST RESULT (SECTIOU 15.209) 15 4.1 LIMIT 15 4.2 TEST PROCEDURE 15 4.3 TEST SETUP 16 4.4 TEST RESULTS 17 4.4.1 SPURIOUS RADIATED EMISSION BELOW 30 MHZ 17 5. 20 DB BANDWIDTH TEST 20 5.1 LIMIT 20 5.2 TEST SETUP 20 5.3 TEST RESULTS 20 APPENDIX-PHOTOS OF TEST SETUP 21 Page 4 of 21 Report No.: STS2512359W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 23 Dec. 2025 STS2512359W01 ALL Initial Issue Page 5 of 21 Report No.: STS2512359W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.209(a) Radiated emission, Spurious Emission PASS 2.1049 20 dB Bandwidth PASS 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.755dB 2 Unwanted Emissions, conducted ±2.874dB 3 All emissions, radiated 9K-30MHz ±3.80dB 4 All emissions, radiated 30M-1GHz ±4.18dB 5 All emissions, radiated 1G-6GHz ±4.90dB 6 All emissions, radiated>6G ±5.24dB 7 Conducted Emission (9KHz-150KHz) ±2.19dB 8 Conducted Emission (150KHz-30MHz) ±2.53dB 9 Occupied Channel Bandwidth ±3.5% 10 Power Spectral Density, conducted ±1.245dB 11 Duty Cycle ±3.2% Page 6 of 21 Report No.: STS2512359W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Solid State Wireless Magnetic Power Bank Brand N/A Model Number KS6-10W Series Model(s) N/A Model Difference N/A Equipemnt Category Non-ISM frequency Antenna Type loop coil antenna Operating frequency 112-205KHz Modulation Type ASK Power Rating Type-C Input: DC 5V/2A,9V/2A,12V/1.5A,18W(MAX) Type-C Output: DC 5V/3A,9V/2.22A,12V/1.67A, 10V/2.25A(SCP),22.5W(MAX) Type-A Output: DC 5V/3A,9V/2A,12V/1.5A, 10V/2.25A(SCP),22.5W(MAX) Wireless Output: 5W,7.5W,10W,15W Adapter N/A Battery DC 3.85V,10000mAh Wireless charging power 15W Max Hardware version number N/A Software version number N/A Connecting I/O Port(s) Please refer to the Note 1. Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User Manual. 2. Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector NOTE 1 N/A N/A Coil N/A Antenna Page 7 of 21 Report No.: STS2512359W01 2.2 DESCRIPTION OF THE TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2BSYH-KS6-10W Setup photo AC Conduction RE (Below 30MHz) Page 2 of 2 FCC ID: 2BSYH-KS6-10W RE (Below 1GHz)