2BT3T-IB808BABY SWING

1 2 567 34 15’ 30’ 60’ ULOP Smart Electric Baby Swing – User Manual (IB808) Manufacturer Information Manufacturer: TJ (fujian) Industrial Co., Ltd Address: No. 518, Yintai Road, Xingtai Development Zone, Changtai County, Zhangzhou City, Fujian Province Customer Service: 18060996861 (09:00–20:00) Please read this manual carefully before using the product and keep it for future reference.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe w ay and understand the hazards involved children shall not play with the appliance cleaning and user maintenance shall not be made by children without supervision the appliance is only to be used with the unit provided Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Packing List 1. Base unit 2. Base legs 3. Swing main frame 4. Cradle assembly 5. Fabric seat 6. Remote control 7. Power adapter 8. Accessories: - Screwdriver, screws - Toy arm, toy hanger, toy axle & plush toys (3 pieces) Product Assembly Instructions Step 1 – Install Base Legs Insert the base legs into both sides of the base unit. Insert 2 screws and tighten with the screwdriver. Step 2 – Install Main Frame Rotate the swing main frame 90°. Ensure the flat side of the spindle faces forward. Attach the frame to the base unit. Step 3 – Install Cradle Components Align and press the spring-ball connectors into place. Step 4 – Attach Cradle Assembly Align the plastic holes with the clips on the main frame and press down. Step 5 – Install Fabric Seat Place the fabric cover onto the cradle assembly and close all snap buttons. Step 6 – Install Toy Arm Assemble Toy Arm Parts 1 and 2, attach triangle holder, then insert into toy slot on the fabric. Operation Instructions Power Supply: Use only the supplied 12V DC / 2A or 2.5A power adapter. Product Features: 1. 5 swing modes 2. 5 swing speeds 3. 12 built-in music tracks 4. 5 volume levels 5. Bluetooth music playback 6. Remote-control operation 7. Adjustable recline angle (15° EU standard, max 18°) 8. Timer: 12 / 30 / 60 minutes 9. Silent mode activation via long-pressing Volume + Control Panel Details Power Button: Press to turn on/off. Indicator lights activate with a beep. Timer Button: Cycles between 0 / 15 / 30 / 60 minutes. Default = 30 minutes. Swing Amplitude Adjustment: Switch among 18° / 21° / 24° / 27° / 30°. Memory function enabled. Music Button: Start/stop music playback; cycles through 12 tracks. Memory function enabled. Volume Control: 5 levels. Operates via Volume + / – buttons. Silent Mode: Long-press Volume + for 2 seconds to enable/disable. Remote Control Instructions Functions include: - Power - Swing amplitude +/– - Timer (15/30/60 minutes) - Music selection - Volume +/– Bluetooth Music: Enable Bluetooth on your phone → search “ULOP” → pair → play music. Bluetooth frequency band: 2.4–2.480 GHz. Cleaning & Maintenance 1. Regularly check for damaged or worn parts. 2. Fabric cover: - Remove via zipper, wash below 30°C, air dry. - Do not soak long-term, do not use bleach or softener. 3. Avoid water contact with metal parts to prevent rust. 4. Do not modify or disassemble structural components. 5. Store in a cool, dry place away from heat and sunlight. 6. Do not apply sticky mechanical grease to moving parts. Warnings 1. For infants aged 0–6 months only. 2. Maximum load: 9 kg. 3. Standard: GB/T 42804-2023. 4. Always supervise the infant. 5. Use only manufacturer-provided adapters. 6. Do not use if any parts are damaged or missing. 7. Do not place the swing on elevated surfaces. 8. Always use the safety harness. 9. Keep ropes/straps away from infants. 10. Do not add unauthorized cushions, pillows, or pads. 11. Not intended for sleep. Transfer infant to a flat surface if asleep. 12. Ensure all locking devices are secured before use. 13. Not for transporting the baby. 14. Do not place on soft surfaces. 15. Keep seat reclined until infant is 4 months and lifts head independently. 16. Keep music player volume low. 17. Not for infants who sit up unassisted. 18. Not for infants who can climb out. 19. Do not leave baby unattended. 20. Do …

Text truncated - open the document above for the full version.

To: SGS NorthAmericaInc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Xiamen BabyPretty Products Co., Ltd NO. 1368, Jicheng Road, Tong'an area, Xiamen, Fujian, 361100, China Regarding: Confidentiality Request regarding application forFCC ID: 2BT3T-IB808 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459and0.457 of the commission's rules, the applicant hereby request confidential treatment of thedocuments listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Thedocuments above contain proprietary information not released to the public. Publicdisclosure of this information may prove harmful to thebusiness of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant does NOT request product external photos, internal photos,test setup photos and user manual to beheld confidential until the deviceis marketed or180 days from the grant date, whichever is less. Sincerely, Name (Printed): Sam Yang Signature: 夕伽口 Title: CEO Onbehalfof Company: Xiamen BabyPretty Products Co., Ltd

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix External Photos for GZCR2511001845HS Test Model No.: IB808 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) Model: IB808 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4 - End of the Appendix -

Label on appliance: Baby Swing Model: IB808 FCC ID: 2BT3T-IB808 5 V ; 1,0 A Made in China TJ (fujian) Industrial Co., Ltd. No.518,Yintai Road,Changtai County Zhangzhou City 363000, China. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 6 Appendix Internal Photos for GZCR2511001845HS Test Model No.: IB808 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 6 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 6 BT Classic ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 6 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251100184503 Page: 1 of 8 FCC ID: 2BT3T-IB808 RF EXPOSURE EVALUATION REPORT Application No.: GZCR2511001845HS Applicant:Xiamen Baby Pretty Products Co., Ltd Address of Applicant:NO.1368, Jicheng Road, Tong'an area, Xiamen, Fujian, China Manufacturer:Xiamen Baby Pretty Products Co., Ltd Address of Manufacturer:NO.1368, Jicheng Road, Tong'an area, Xiamen, Fujian, China Factory:Xiamen Baby Pretty Products Co., Ltd Address of Factory:NO.1368, Jicheng Road, Tong'an area, Xiamen, Fujian, China Product Name:BABY SWING Model No.: IB808, IB808X, IB808S   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Standard(s) : KDB 447498 D01 V06 Date of Receipt: 2025-11-20 Date of Evaluation: 2025-12-31 Date of Issue: 2026-03-18 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251100184503 Page: 2 of 8 Revision Record VersionReport No.DateRemark 01 GZCR251100184503 2026-03-18Original Authorized for issue by: Luke Lin/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251100184503 Page: 3 of 8 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure KDB 447498 D01 V06 KDB 447498 D01 V06KDB 447498 D01 V06Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: IB808, IB808X, IB808S According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on appearance decoration and cradle. Therefore, only one model IB808 was evaluated in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251100184503 Page: 4 of 8 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1General Description of Applied Standards........................................................................................7 5.2RF Exposure Evaluation....................................................................................................................7 5.2.1Limit & Test Method......................................................................................................................7 5.2.2Conclusion....................................................................................................................................7 6EUT Constructional Details (EUT Photos).............................................................................................8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251100184503 Page: 5 of 8 4General Information 4.1Details of E.U.T. Power supply:DC 5 V powered by AC/DC Adapter as below: Model: AD006AD50100UV INPUT: AC 100-240V 50/60Hz, 0.4A MAX OUTPUT: DC 5.0 V 1.0 A Cable(s):AC mains, 2 wires, 1.2m, unshielded. RF character:Refer to report GZCR251100184502 for BT classic detail. Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, No.198, Kezhu Road, Science City, Economic & Technological Development Area, Guangzhou, Guangdong, China 510663 Tel: +86 20 82155555 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251100184503 Page: 6 of 8 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS-CSTC Standards Technical Service…

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary ANT SPECITEM 2.4G ANTModel Name VerticalHorizontal 2500MHz2400MHz2400MHz2500MHz2400MHz2400MHz Center Frequency -1.86-2.46-5.25-0.58-0.76-1.26 -0.58dBMAX. Gain Horizontal and VerticalPolarization Azimuth Beam Pattern Omni-directional 50 OhmImpedance 38.20mmAntenna Length Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) 7th Floor, Fuhua Technology Building, 9116 Beihuan Avenue, Nanshan District, Shenzhen, Guangdong Province Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 1 of 85 FCC ID: 2BT3T-IB808 TEST REPORT Application No.: GZCR2511001845HS Applicant: Xiamen Baby Pretty Products Co., Ltd Address of Applicant: NO.1368, Jicheng Road, Tong'an area, Xiamen, Fujian, China Manufacturer: Xiamen Baby Pretty Products Co., Ltd Address of Manufacturer: NO.1368, Jicheng Road, Tong'an area, Xiamen, Fujian, China Factory: Xiamen Baby Pretty Products Co., Ltd Address of Factory: NO.1368, Jicheng Road, Tong'an area, Xiamen, Fujian, China Product Name: BABY SWING Model No.: IB808, IB808X, IB808S   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2025-11-20 Date of Test: 2025-12-04 to 2026-01-04 Date of Issue: 2026-03-18 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 2 of 85 Revision Record Version Report No. Date Remark 01 GZCR251100184502 2026-03-18 Original Authorized for issue by: Luke Lin/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 3 of 85 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2020) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10 (2020) Section 6.9.2 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10 (2020) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10 (2020) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10 (2020) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 7.8.7.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(d) Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 4 of 85  Declaration of EUT Family Grouping: Model No.: IB808, IB808X, IB808S According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on appearance decoration and cradle. Therefore, only one model IB808 was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 5 of 85 3 Contents Page 1 Cover Page ................................................................................................................................................. 1 2 Test Summary ............................................................................................................................................ 3 3 Contents ..................................................................................................................................................... 5 4 General Information ................................................................................................................................... 7 4.1 Details of E.U.T. .................................................................................................................................. 7 4.2 Description of Support Units ............................................................................................................... 7 4.3 Measurement Uncertainty ................................................................................................................... 8 4.4 Test Location ....................................................................................................................................... 8 4.5 Test Facility ......................................................................................................................................... 9 4.6 Deviation from Standards .................................................................................................................... 9 4.7 Abnormalities from Standard Conditions ............................................................................................ 9 5 Equipment List ......................................................................................................................................... 10 6 Radio Spectrum Technical Requirement .............................................................................................. 13 6.1 Antenna Requirement ....................................................................................................................... 13 6.1.…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 79 of 85 Pi/4DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV Pi/4DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 80 of 85 Pi/4DQPSK_2DH5_MCH_2441MHz_Ant1_NTNV Pi/4DQPSK_2DH5_HCH_2480MHz_Ant1_NTNV SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 81 of 85 Pi/4DQPSK_2DH5_HCH_2480MHz_Ant1_NTNV Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 82 of 85 Pi/4DQPSK_2DH5_HOPP_Ant1_NTNV 8DPSK_3DH5_LCH_2402MHz_Ant1_NTNV SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 83 of 85 8DPSK_3DH5_LCH_2402MHz_Ant1_NTNV 8DPSK_3DH5_MCH_2441MHz_Ant1_NTNV SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 84 of 85 8DPSK_3DH5_HCH_2480MHz_Ant1_NTNV 8DPSK_3DH5_HCH_2480MHz_Ant1_NTNV SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251100184502 Page: 85 of 85 8DPSK_3DH5_HOPP_Ant1_NTNV 8DPSK_3DH5_HOPP_Ant1_NTNV - End of the Report -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 4 Appendix Test Setup Photo for GZCR251100184502 Test Model No.: IB808 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 4 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands & Radiated Spurious Emissions Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 3 of 4 Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 4 of 4 - End of the Appendix -