2BTBL-LIVATYLIVATY

Lume & Care Cosmetic wellness LED device with serums TRANSLATION OF THE ORIGINAL USER MANUAL (GERMAN) USER MANUAL BEMER Int. AG | Austrasse 15 | LI-9495 Triesen | www.bemergroup.com Tel.: +423 399 39 99 | Fax: +423 399 39 98 Document number: 765100 | Revision: 26.1 | Date: 01/2026 3 TABLE OF CONTENTS General safety information Hello! Scope of delivery Contraindications Sensitivity self-test Areas of application Operating the LIVATY Lume Recommended application Helpful tips for best results Charging Cleaning instructions Troubleshooting Disposal Regulatory information Technical specifications Description of symbols 04 05 06 07 08 09 11 12 14 15 16 17 18 18 20 21 4 GENERAL SAFETY INFORMATION LIVATY products are intended for cosmetic use only. They must be used in accordance with this user manual. Note: For detailed information on the individual serums, including ingredients and usage instructions, please refer to the package inserts provided with each serum. This additional information, which is not included in this user manual, must be followed carefully. Safety Instructions 1 Do not look directly at the LED light source during use. Keep your eyes closed. For added comfort, wear the included LIVATY Lume goggles. 2 Do not use the LIVATY Lume in combination with products such as ointments or medications unless they are specif- ically approved for this purpose. If you are unsure, consult a healthcare professional. 3 Do not use on sunburned, hypersensitive, or inflamed skin, or if you have a fever. 4 Implanted medical devices such as pacemakers and defibrillators may be affected by strong magnets. If you or anyone in your household has an implanted medical device or defibrillator, do not place the LIVATY Lume near the device. If in doubt, consult the manufacturer of the implanted device. 5 This device contains a rechargeable lithium-ion battery. • Never open or damage it, or expose it to fire. • Keep the device away from direct sunlight and heat. • If you notice any unusual signs (e.g., overheating, smoke, or odor), switch off the device immediately and stop using it. • Do not dispose of the battery in household waste. Please take the device to an appropriate collection point. 6 The LIVATY Lume can be disassembled for cleaning and rinsed under running water (IP65). Observe the markings on the respective components and do not reach between the upper part of the LIVATY Lume device and the lower housing shell. 7 Always use the USB-C power adapters recommended in the user manual. 8 Do not use chemical, alcohol-based, or aggressive cleaning agents. 9 Never leave the device unattended while it is switched on. The device must not be used by individuals with reduced physical, sensory or mental capabilities, or by those lacking the necessary experience and knowledge, unless supervised or properly instructed in its safe use. This device is not intended for use by children and must be kept out of their reach. 10 Allow the LIVATY Lume to cool for at least 10 minutes between treatments if the ambient temperature exceeds 35°C (95°F). 11 Do not drop the device or the Qi-Charger, as this may cause damage. 12 Do not attempt to disassemble, repair, or modify the device or the Qi-Charger yourself, and do not attempt to replace the battery. 13 Keep the device and Qi-Charger away from heat sources and do not expose them to direct sunlight. 14 Do not expose this product or the Qi-Charger to rain or humid conditions. 15 Do not place metal objects between the device and the Qi-Charger during charging. 5 HELLO! Thank you for choosing the LIVATY Lume & Care Set. This user manual will walk you through each step, making it easy to enjoy all the features of your LIVATY Lume with confidence. Please take a few moments to read this user manual carefully before using your LIVATY Lume for the first time. This will help ensure every- thing runs smoothly, prevent any mishaps – and guarantee full warran- ty coverage for your device. This user manual apply to the following Lume & Care Sets. The includ- ed serums may vary depending on the selected set. • LIVATY Lume & Care Set: 415100 • LIVATY Lume & Care Set Eco Bundle Early Care: 415200 • LIVATY Lume & Care Set Eco Bundle Recovery: 415300 • LIVATY Lume & Care Set Eco Bundle Timeless Skin: 415400 We hope you enjoy discovering and using your LIVATY Lume! 6 SCOPE OF DELIVERY LIVATY Lume Early Care Serum LIVATY Lume Clutch Recovery Serum LIVATY Lume Goggles Timeless Skin Serum LIVATY Lume Qi-Charger Figure 1: The LIVATY Lume with accessories Figure 2: The LIVATY serums 7 CONTRAINDICATIONS Please do not use the device if you ... • are taking prescription or over-the-counter medications known to increase photosensitivity (e.g., certain antibiotics, acne treatments, or St. John’s Wort) • have skin conditions that may be worsened by light and/or heat exposure • have suspicious or cancerous skin lesions • suffer from photosensitivity disorders or inherited eye conditions • are pregnant or breastfeeding • have injured or compromised skin, including open wounds, blisters, local inflammation, infections, bruising, or tumors Do not use the device on moles, tattoos, or permanent makeup. If you have recently undergone any aesthetic or medical skin treatments that may have irritated the skin, we recommend pausing use for at least 72 hours. When in doubt, consult a qualified professional. If you experience any unusual reactions (e.g., pronounced redness, pain, or a burning sensation), stop using the device immediately. 8 SENSITIVITY SELF-TEST If you have very sensitive skin, we recommend testing the Lume & Care Set first on a small area, such as your arm. If you notice any unusual reactions (e.g., pronounced redness, burning, or itch- ing), stop using the device and, if necessary, consult a healthcare professional. Switch on the LIVATY Lume (two short turns to the left or right). Place the LIVATY Lume on your arm (see Figure 3) and carry out one complete 4-minute treatment. Then apply a small am…

Text truncated - open the document above for the full version.

Date: 2025/12/17 Dario Werth= T +423 399 39.99 // F +423 399 39.98 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Berner Int. AG Address Austrasse 15, Triesen, N/A, 9495, Liechtenstein FRN 0037673704 Grantee Code 2BTBL= FCC ID: 2BTBL-LIVATY Authorized Contact Name Amy Huang Contact Phone 18681079012= Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)= in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)= in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)= if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. d)= in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)= in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)= neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a "party" for these purposes. g)= the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: httos://www.fcc.gov/wireless/bureau-divisions/technolooies-svstems-and-innovation-division/rules-regulations-title-47 Link to KDBs: httos://anns.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.qc.ca/eic/site/smt-ust.nsffeno/sf01130.html Link to the Covered List: Covered List Title: Head of Quality and Regulatory Affairs NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.4 April 25, 2025= Page 1 of 1= Original Issue: Jan. 4, 2021

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States FCC COVERED LIST DECLARATION LETTER Applicant Legal Business Name Bemer Int. AG Address Austrasse 15, Triesen, N/A, 9495, Liechtenstein FRN 0037673704 Grantee Code 2BTBL= FCC ID: 2BTBL-LIVATY Authorized Contact Name Amy Huang Contact Phone 18681079012= Contact Email [email protected] Bemer Int. AG ("the applicant") certifies: the equipment for which authorization is sought is not "covered" equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing "covered" equipment. the software to be loaded prior to marketing of the equipment identified above is not "covered" software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the "Covered List". the device is not capable of storing or running software listed on the covered list and therefore is not inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: - -= / EMER INT. AG i riesen Date: 2025/12/17 Dario Werth=T +423 399 39,99 li ti-24739991:9e-c9h8lensten A ustrAsse Print Name: Title: Head of Quality and Regulatory Affairs *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authonzed person listed in the FCC database Justification/evidence: 1. The device is not capable of storing or running any software. Please refer to the user manual. 2. The equipment for which authorization is sought is not "covered" equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Please refer to Internat photo. Page 1 of 1= Revision 1.0

Bemer Int. AG U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification - Section 2.911(d)(7) Information Desiqnated U.S. Aqent Company Name: United Consulting Technology Services Co., Ltd FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CIT Y OF INDUSTRY CA 91748 United States Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we ("the Designated U.S. Agent) have accepted the responsib山tyto act as the Designated U.S. Agent for Service of Process as requi「ed by section 47 CFR 2.911 (d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2025/12/17 Signed by (Printed Name/Title): David Wu/CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their respons心lityto inform the FCC wheneve「the Designated U.S. Agent information above changes Applicant Company name: Bemer Int. AG FRN: 0037673704 Grantee Code: 2BTBL FCC ID: 2BTBL-LIVATY Contact Name: Dario Werth Street Address: Austrasse 15 City/Province/Zip: Triesen, N/A, 9495 Telephone No: 18681079012 Email: [email protected] Applicant Signature: Date: 2025/12/17 Signed by (Printed Name/}廿e} 、 、 多 广 已 ． 它 。 \.) I' 1 1 L i e C � : e f l s t e i f l 心 答 - 二 三 39 98 言 : : S 3 e 沪 9 9 9 I I f -\-

Berner Int. AG Date: 2025/12/17 TO:=Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BTBL-LIVATY To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application.for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until further written notice from the applicant. Name (Printed): Dario Werth Title: Head of Quality and Regulatory Affairs raErlEn T. AG Austrasse 15 // 9495 Triesen // Liechtenstein T +423 399 3 9-99 // F +423 399 39-98 Signature: GROUp On behalf of Company: Berner Int. AG

Berner Int. AG To:=SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Berner Int. AG Austrasse 15, Triesen, N/A, 9495, Liechtenstein Regarding:= Confidentiality Request regarding application for FCC ID: 2BTBL-LIVATY LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant does NOT request product external photos, internal photos, test setup photos and user manual to be held confidential until the device is marketed or 180 days from the grant date, whichever is less. Sincerely, Name (Printed):- Dario Werth Title: Head of Quality and Regulatory Affairs GE)- R ; IN= 0....e - A GRouP r 14.2 r 3a 3 s:5' .//19 C 495 Friesen 99// F=/ liechtenstein 3 +42339939-98 Sign ture: On behalf.of Company: Berner Int. AG

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix External Photos for GZCR2510001596HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4 - End of the Appendix -

Produkt Label Livaty Lume, 28.11.2025

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 10 Appendix Internal Photos for GZCR2510001596HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 10 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 7 of 10 Magnetic Pulse Coils SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 8 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 9 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 10 of 10 - End of the Appendix - WPC antenna

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159602 Page: 1 of 12 FCC ID: 2BTBL-LIVATY TEST REPORT Application No.: GZCR2510001596HS Applicant:Bemer Int. AG Address of Applicant:Austrasse 15, 9495 Triesen, Principality of Liechtenstein Manufacturer:Bemer Int. AG Address of Manufacturer:Austrasse 15, 9495 Triesen, Principality of Liechtenstein Factory:Flink production GmbH Address of Factory:No. 11, Alley 24, Lane 198, Xiao-dong Road, 70154 Tainan City, Taiwan, China Product Name:LIVATY Model No.: Lume Standard(s) : 47 CFR Part 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Receipt: 2025-10-17 Date of Test: 2025-11-26 Date of Issue: 2026-05-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159602 Page: 2 of 12 Revision Record VersionReport No.DateRemark 01GZCR2510001596022026-05-08Original Authorized for issue by: Key Liang/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159602 Page: 3 of 12 2Test Summary Radio Spectrum Matter Part ItemStandardMethodRequirementResult Field strength 47 CFR Part 1.1310 KDB 680106 D01 47 CFR Part 1.1310 & KDB 680106 D01 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159602 Page: 4 of 12 3Contents Page 1Cover Page.................................................................................................................................................1 2Test Summary............................................................................................................................................3 3Contents.....................................................................................................................................................4 4General Information...................................................................................................................................5 4.1Details of E.U.T...................................................................................................................................5 4.2Description of Support Units................................................................................................................5 4.3Measurement Uncertainty...................................................................................................................5 4.4Test Location.......................................................................................................................................6 4.5Test Facility.........................................................................................................................................6 4.6Deviation from Standards....................................................................................................................6 4.7Abnormalities from Standard Conditions.............................................................................................6 5Equipment List...........................................................................................................................................7 6Radio Spectrum Matter Test Results.......................................................................................................8 6.1Magnetic field strength........................................................................................................................8 6.1.1E.U.T. Operation.............................................................................................................................8 6.1.2Test Mode Description....................................................................................................................9 6.1.3Test Setup Diagram........................................................................................................................9 6.1.4Measurement Procedure and Data..............................................................................................10 7Test Setup Photo.....................................................................................................................................11 8EUT Constructional Details (EUT Photos).............................................................................................12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159602 Page: 5 of 12 4General Information 4.1Details of E.U.T. Power supply:Battery operation: DC 3.7V 1500mAh for internal rechargeable battery as below: Model: 803450 Rated: DC 3.7 V, 1500mAh, 5.55Wh Charged by wireless charger MH-D043(FCC ID: 2BSBS-MH-D43) which was powered by AC/DC adapter, details refer to section 4.2 of test report. Test voltage:AC 120V, 60 Hz Cable(s):1.2m unscreened USB C charging cable. Operation frequency:146 kHz to 205.974 kHz Modulation type:Load modulation Antenna type:Loop Antenna Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 4.2Description of Support Units DescriptionManufacturerModel No.Serial No. AC/DC adapter provided by applicant. -- Model: PD20W-C- GAN Input: AC 100-240V 50/60Hz 0.6A Output: DC 5.0V 3A, DC 9.0V 2.22A, DC 12.0V 1.67A, -- 4.3Measurement Uncertainty Test ItemMeasurement Uncertainty Field strengthMF:U=0.13dB,EF:U=0.4dB Remark: The U lab (lab Uncertainty) is less than U cispr (CISPR Uncertainty) or U ETSI (ETSI Uncertainty). Emission decision rule: – Compliance is deemed to occur if no measured disturba…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159601 Page: 1 of 31 FCC ID: 2BTBL-LIVATY TEST REPORT Application No.: GZCR2510001596HS Applicant:Bemer Int. AG Address of Applicant:Austrasse 15, 9495 Triesen, Principality of Liechtenstein Manufacturer:Bemer Int. AG Address of Manufacturer:Austrasse 15, 9495 Triesen, Principality of Liechtenstein Factory:Flink production GmbH Address of Factory:No. 11, Alley 24, Lane 198, Xiao-dong Road, 70154 Tainan City, Taiwan, China Product Name:LIVATY Model No.: Lume Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2025-10-17 Date of Test: 2025-11-04 to 2025-11-18 Date of Issue: 2026-05-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159601 Page: 2 of 31 Revision Record VersionReport No.DateRemark 01GZCR2510001596012026-05-08Original Authorized for issue by: Key Liang/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159601 Page: 3 of 31 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult 20dB Bandwidth ANSI C63.10 (2020) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Conducted Emissions at AC Mains Power Port (150kHz-30MHz) ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Restricted Bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2020) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2020) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251000159601 Page: 4 of 31 3Contents Page 1Cover Page.................................................................................................................................................1 2Test Summary............................................................................................................................................3 3Contents.....................................................................................................................................................4 4General Information...................................................................................................................................6 4.1Details of E.U.T...................................................................................................................................6 4.2Description of Support Units................................................................................................................6 4.3Measurement Uncertainty...................................................................................................................7 4.4Test Location.......................................................................................................................................7 4.5Test Facility.........................................................................................................................................8 4.6Deviation from Standards....................................................................................................................8 4.7Abnormalities from Standard Conditions.............................................................................................8 5Equipment List...........................................................................................................................................9 6Radio Spectrum Technical Requirement...............................................................................................11 6.1Antenna Requirement.......................................................................................................................11 6.1.1Test Requirement:........................................................................................................................11 6.1.2Conclusion....................................................................................................................................11 7Radio Spectrum Matter Test Results.....................................................................................................12 7.120dB Bandwidth................................................................................................................................12 7.1.1E.U.T. Operation...........................................................................................................................12 7.1.2Test Mode Description..................................................................................................................12 7.1.3Test Setup Diagram......................................................................................................................12 7.1.4Measurement Procedure and Data..............................................................................................13 7.2Conducted Emissions at AC Mains Power Port (150kHz-30MHz)....................................................14 7.2.1E.U.T. Operation...........................................................................................................................14 7.2.2Test Mode Description..................................................................................................................14 7.2.3Test Setup Diagram....…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 7 Appendix Test Setup Photo for GZCR251000159602 Test Model No.: Lume SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 7 Test Setup Photo Magnetic field strength Side 1 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 3 of 7 Side 2 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 4 of 7 Side 3 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-AR…

Text truncated - open the document above for the full version.