2BTDPILATLB100Infant Beacon

Intelligent Locations

Click to zoom

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: Apr 23, 2026
Application Purpose: Original Equipment
Equipment Note: Infant Beacon
Frequency Range: 2402.00000000 - 2480.00000000
Company: Intelligent Locations
Country: United States

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Intelligent Locations Infant Beacon (ILAT-LB100) User Manual Introduction: Intelligent Locations’ infant beacon safety devices are wearable Bluetooth Low Energy (BLE) technology leg bracelets for tracking infants. Infant safety bracelet is intended to be used alongside our Infant security System. The beacon remains in a halt state after when no band is connected. At this state there is no advertising or any other function and could last 4 years on a single battery. Once a band is connected, it will begin advertising, change ad rates depending on motion (1 second interval with motion, 3 second interval without motion). After 1 second of band connection, the capacitive sensor is ready to sense skin against the beacon. A flag in the advertisement packet relays the state. If band is removed or cut, the beacon will advertise for 5 minutes before it stops back to the halt state. The specifications for the infant beacon are as follows: PERFORMANCE • 32 - Bit ARM ® Cortex ® - M3 with 76.8 Mhz SENSOR • Accelerometer & Internal Temperature Sensor (-40°C to 105 °C) CONNECTIVITY • Bluetooth LE 5.2 (direction finding) POWER • 3vCR2032 Coin Cell Battery (non-serviceable) • Expected Lifetime Approximately 3yrs (configuration-dependent) PHYSICAL DIMENSIONS • Length - 1.34in (34.04mm) • Width - 1.25in (31.75mm) • Height - 0.25in (6.35mm The infant beacons are shipped in bulk to a customer site location. The Intelligent Locations Account team is responsible for installing these beacons. Additional Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Class B: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radi-ate radio frequency energy and, if not in- stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help.

RF Exposure Info

Test Setup Photos

Test Report

EUROFINS ELECTRICAL TESTING SERVICE (SHENZHEN) CO., LTD. RADIO TEST - REPORT FCC Compliance Test Report for Product name: Infant Beacon Model name: ILAT-LB100 FCC ID: 2BTDPILATLB100 Test Report Number: EFGX25090520-IE-09-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Phone: +86-0755-829118671 Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8 Fax: +86-0755-82910749 Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 1 of 26 1 General Information 3 1.1 Notes 3 1.2 Testing laboratory 4 1.3 Details of applicant 4 1.4 Details of manufacturer 4 1.5 Application details 5 1.6 Test item 5 1.7 Test standards 5 2 Technical test 6 2.1 Summary of test results 6 2.2 Test environment 6 2.3 Measurement uncertainty 6 2.4 Test mode 7 2.5 Test equipment utilized 8 2.6 Auxiliary equipment used during test 9 2.7 Test software information 9 2.8 Test setup 10 2.9 Test results 12 3 Technical Requirement 13 3.1 Conducted emission AC power port 13 3.2 Duty cycle 14 3.3 6dB bandwidth 15 3.4 99% Occupied Bandwidth 16 3.6 Conducted Peak output power 17 3.7 Power spectral density 18 3.8 Conducted Spurious Emissions 19 3.9 Band edge 20 3.10 Spurious radiated emissions for transmitter 23 4 Test Setup Photos 25 5 External Photo 25 6 Internal Photos 25 7 Appendix 25 Test Report No.: EFGX25090520-IE-09-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 3 of 25 1 General Information 1.1 Notes The results of this test report relate exclusively to the item tested as specified in chapter “Description of test item” and are not transferable to any other test items. Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. is not responsible for any generalisations and conclusions drawn from this report. Any modification of the test item can lead to invalidity of test results and this test report may therefore be not applicable to the modified test item. The test report may only be reproduced or published in full. Reproducing or publishing extracts of the report requires the prior written approval of the Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. This document is subject to the General Terms and Conditions and the Testing and Certification System of Eurofins Electrical Testing Service (Shenzhen) Co., Ltd., available on request or accessible at www.eurofins.com. Operator: 2025-12-08 Bruce Zheng / Project Engineer Date Eurofins-Lab. Name / Title Signature Technical responsibility for area of testing: 2025-12-08 Albert Xu / Lab Manager Date Eurofins-Lab. Name / Title Signature Test Report No.: EFGX25090520-IE-09-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 4 of 25 1.2 Testing laboratory Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Telephone : +86-755-82911867 Fax : +86-755-82910749 The Laboratory has passed the Accreditation by the American Association for Laboratory Accrediation (A2LA). The Accreditation number is 5376.01 The Laboratory has been listed by industry Canada to perform electromagnetic emission measurements, The CAB identifier is CN0088 1.3 Details of applicant Name : Intelligent Locations Address : 8601 Six Forks Rd., Suite 205, Raleig, North Carolina, 27615-5236, United States Telephone : ./. Fax : ./. 1.4 Details of manufacturer Name : Kaertech Limited Address : Suite 1601-02. Seaview Commercial Building, 21-24 Connaught Road West, Hong Kong Telephone : ./. Fax : ./. Test Report No.: EFGX25090520-IE-09-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 5 of 25 1.5 Application details Date of receipt of application : 2025-09-27 Date of receipt of test item : 2025-09-27 Date of test : 2025-09-27 to 2025-12-08 Date of issue : 2025-12-08 1.6 Test item Product type : Infant Beacon Test Model : ILAT-LB100 Sample ID : 250927-11-004 Brand : ./. Serial number : ./. Hardware Version : 1.0 Software / Firmware Version : 1.4 Ratings : DC 3V Test voltage : DC 3V RadioTechnical data Frequency range : 2402MHz – 2480MHz Radio Tech. : Bluetooth Low Energy Frequency channel : 40 Channels Modulation : GFSK Antenna type : Chip antenna Maximum antenna gain : 2.4dBi Additional information : ./. The above sample(s) and sample information was/were submitted and identified on behalf of the applicant. Eurofins assures objectivity and impartiality of the test, and fulfills the obligation of confidentiality for applicant’s commercial infor- mation and technical documents. 1.7 Test standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES Subpart C - Intentional Radiators Test Method 1: ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emis- sions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 2: ANSI C63.10-2020, American National Standard for Testing Unlicensed Wireless Devices. 3: KDB558074 D01 15.247 Meas Guidance v05r02 Test Report No.: EFGX25090520-IE-09-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 6 of 25 2 Technical test 2.1 Summary of test results No deviations from th…

Text truncated - open the document above for the full version.

Test Report

Appendix A: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.640 2401.720 2402.360 0.5 PASS 2440 0.648 2439.712 2440.360 0.5 PASS 2480 0.632 2479.720 2480.352 0.5 PASS Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0829 2401.5068 2402.5897 --- --- 2440 1.0997 2439.4989 2440.5986 --- --- 2480 1.1107 2479.4964 2480.6071 --- --- Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Appendix C: Maximum conducted output power Test Result Peak TestMode Antenna Frequency[MHz] Conducted Peak Powert[dBm] Conducted Limit[dBm] BLE_1M Ant1 2402 -6.20 ≤30 2440 -7.06 ≤30 2480 -7.61 ≤30 Test Graphs Peak BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Appendix D: Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -8.27 ≤8.00 PASS 2440 -9.04 ≤8.00 PASS 2480 -9.63 ≤8.00 PASS Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Appendix E: Band edge measurements Test Result TestMode Antenna ChName Frequency [MHz] RefLevel[dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 Low 2402 -6.99 -43.68 ≤-26.99 PASS High 2480 -8.64 -46.64 ≤-28.64 PASS Test Graphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 Appendix F: Conducted Spurious Emission Test Result TestMode Antenna Frequency [MHz] FreqRange [MHz] RefLevel [dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 Reference -7.34 -7.34 --- PASS 30~1000 -7.34 -58.4 ≤-27.34 PASS 1000~26500 -7.34 -30.4 ≤-27.34 PASS 2440 Reference -8.30 -8.30 --- PASS 30~1000 -8.30 -58.32 ≤-28.3 PASS 1000~26500 -8.30 -34.21 ≤-28.3 PASS 2480 Reference -8.86 -8.86 --- PASS 30~1000 -8.86 -57.95 ≤-28.86 PASS 1000~26500 -8.86 -33.55 ≤-28.86 PASS Test Graphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 Appendix G: Duty Cycle Test Result TestMode Antenna Frequency[MHz] ON Time [ms] Period [ms] Duty Cycle [%] BLE_1M Ant1 2402 0.40 0.63 63.49 2440 0.40 0.63 63.49 2480 0.40 0.63 63.49 Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Appendix H: Restricted Band Mode: LE 1M Channel: 2402MHz Test Graph Suspected Data List NO. Frequency [MHz] Reading [dBμV/m] Level [dBμV/m] Factor [dB] Limit [dBμV/m] Margin [dB] Height [cm] Angle [°] Det Polarity Verdict 1 2310.0000 36.88 39.55 2.67 74.00 34.45 150 110 PK Horizontal PASS 2 2330.5400 38.95 41.75 2.80 74.00 32.25 150 40 PK Horizontal PASS 3 2350.0400 39.49 42.54 3.05 74.00 31.46 150 230 PK Horizontal PASS 4 2363.8200 38.94 41.88 2.94 74.00 32.12 150 280 PK Horizontal PASS 5 2381.3700 39.75 42.78 3.03 74.00 31.22 150 350 PK Horizontal PASS 6 2390.0000 38.67 41.62 2.95 74.00 32.38 150 340 PK Horizontal PASS Note:(1)Level=Reading+Factor (2)Margin=Limit-Level Mode: LE 1M Channel: 2402MHz Test Graph Suspected Data List NO. Frequency [MHz] Reading [dBμV/m] Level [dBμV/m] Factor [dB] Limit [dBμV/m] Margin [dB] Height [cm] Angle [°] Det Polarity Verdict 1 2310.0000 38.03 40.70 2.67 74.00 33.30 150 210 PK Vertical PASS 2 2333.4000 38.87 41.64 2.77 74.00 32.36 150 270 PK Vertical PASS 3 2350.0400 38.73 41.78 3.05 74.00 32.22 150 60 PK Vertical PASS 4 2369.4100 38.74 41.77 3.03 74.00 32.23 150 190 PK Vertical PASS 5 2377.7300 39.27 42.35 3.08 74.00 31.65 150 80 PK Vertical PASS 6 2390.0000 38.19 41.14 2.95 74.00 32.86 150 260 PK Vertical PASS Note:(1)Level=Reading+Factor (2)Margin=Limit-Level Mode: LE 1M Channel: 2480MHz Test Graph Suspected Data List NO. Frequency [MHz] Reading [dBμV/m] Level [dBμV/m] Factor [dB] Limit [dBμV/m] Margin [dB] Height [cm] Angle [°] Det Polarity Verdict 1 2483.5000 40.82 44.28 3.46 74.00 29.72 150 160 PK Horizontal PASS 2 2484.7000 42.02 45.54 3.52 74.00 28.46 150 110 PK Horizontal PASS 3 2487.7000 39.76 43.24 3.48 74.00 30.76 150 210 PK Horizontal PASS 4 2490.7500 39.38 42.93 3.55 74.00 31.07 150 280 PK Horizontal PASS 5 2494.1500 38.42 42.01 3.59 74.00 31.99 150 210 PK Horizontal PASS 6 2500.0000 38.94 42.44 3.50 74.00 31.56 150 190 PK Horizontal PASS Note:(1)Level=Reading+Factor (2)Margin=Limit-Level Mode: LE 1M Channel: 2480MHz Test Graph Suspected Data List NO. Frequency [MHz] Reading [dBμV/m] Level [dBμV/m] Factor [dB] Limit [dBμV/m] Margin [dB] Height [cm] Angle [°] Det Polarity Verdict 1 2483.5000 46.07 49.53 3.46 74.00 24.47 150 350 PK Vertical PASS 2 2484.7500 41.82 45.34 3.52 74.00 28.66 150 180 PK Vertical PASS 3 2488.5000 39.72 43.22 3.50 74.00 30.78 150 240 PK Vertical PASS 4 2493.4000 39.44 43.02 3.58 74.00 30.98 150 350 PK Vertical PASS 5 2494.8000 38.92 42.49 3.57 74.00 31.51 150 240 PK Vertical PASS 6 2500.0000 37.35 40.85 3.50 74.00 33.15 150 180 PK Vertical PASS Note:(1)Level=Reading+Factor (2)Margin=Limit-Level Appendix I: Spurious emissions Final Data List NO. Freq. [MHz] Factor [dB/m] QP Value [dBμV/m] QP Limit [dBμV/m] QP Margin [dB] Height [cm] Angle [°] Polarity Verdict 1 36.0625 -14.38 15.83 40.00 24.17 100 50 Vertical PASS 2 48.4300 -14.35 16.12 40.00 23.88 100 164 Vertical PASS 3 152.8262 -14.06 16.60 43.50 26.90 200 48 Vertical PASS 4 584.4763 -7.16 25.24 46.00 20.76 200 234 Vertical PASS 5 722.2162 -4.67 27.07 46.00 18.93 200 287 Vertical PASS 6 902.5150 -1.32 28.75 46.00 17.25 200 127 Vertical PASS Final Data List NO. Freq. [MHz] Factor [dB/m] QP Value [dBμV/m] QP Limit [dBμV/m] QP Margin [dB] Height [cm] Angle [°] Polarity Verdict 1 43.3375 -14.13 15.30 40.00 24.70 100 319 Horizontal PASS 2 58.7362 -15.04 21.31 40.00 18.69 200 105 Horizontal PASS 3 577.9288 -7.47 24.19 46.00 21.81 200 252 Horizontal PASS 4 719.3062 -4.75 24.81 46.00 21.19 100 84 Horizontal PASS 5 843.2238 -2.58 27.38 46.00 18.62 200 248 Horizontal PASS 6 946.6500 0.23 30.65 46.00 15.35 20…

Text truncated - open the document above for the full version.

Test Report

BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA Part Numbers: 2108838-1 •Wi-Fi 2.4 GHz, Bluetooth, ZigBee •Embedded Ceramic Chip Antenna •On Board SMD Antenna •Available in tape & reel •The following data is based on 10 x 30 mm ground size FEATURES & BENEFITS DATA AND DEVICES /// BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA Frequency Range (MHz)2400-2500 VSWR< 2.0:1 Average Efficiency57% Peak Gain2.4 dBi Average Gain-2.5dBi Feed Point Impedance50 ohms PolarizationLinear Size3.2 mm x 1.6 mm x 1.2 mm Weight< 0.02 g MountingSurface mount Mating ConnectorN/A CableN/A Operating Temperature-40 to +85°C Storage Temperature-40 to +85°C Hazardous MaterialsA certificate of conformance is available from the product page on TE website. SPECIFICATIONS Return LossVSWR Efficiency RF DATA DATA AND DEVICES /// BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA Standard Antenna Solutions Azimuth Elevation 2Elevation 1 Test setup Azimuth Plane Elevation 1 Plane Elevation 2 Plane RADIATION PATTERN DATA AND DEVICES /// BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA Standard Antenna Solutions 0° 90° 0° 90° Z Y X KEEP OUT AREA MOUNTING GUIDE DIMENSIONS DATA AND DEVICES /// BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA Standard Antenna Solutions NOTES: 1. No copper allowed in designated area on all PCB layers – 2. Measured with above matching circuit condition. 3. For more information please call TE. 4. Measured with below matching circuit condition. ①4.7nH②1.8nH ③NC See Note 1 PCB Ground 50 Ohms feeding line Antenna outline (3.2mm x 1.6mm x1.2mm) 20.00 15.00 15.00 20.00 25.00(2x) 5.00(2x) Keep Out Area Antenna Outline Antenna Outline 1.60±0.20 0.40±0.20 0.40±0.20 PCB Ground Dimension: mm Diagrams is not to scale Dimension: mm Diagrams is not to scale Shunt component pads ② Series component pad ① Shunt component pads ③ TE TECHNICAL SUPPORT CENTER USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 For phone numbers in other countries, go to te.com/support-center te.com TE Connectivity, TE Connectivity (logo) are trademarks. All other logos, products and/or company names referred to herein mig ht be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes o nly, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products shouldmake their own evaluation to determine the suitability of each such product for the specific application. © 2020 TE Connectivity Ltd. family of companies All Rights Reserved. 03/2023 PACKAGING BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA Standard Antenna Solutions DATA AND DEVICES /// BT/Wi-Fi 2.4 GHz EMBEDDED CHIP ANTENNA 2,000pcs/1Reel Ø7” x 12 mm 68.00 6,000pcs/3 Reel 3 Reel/1 Inner box 205.00 30,000pcs/5 Inner box 5 Inner box/I Outer box #1 205.00 60,000pcs/10 Inner box 10 Inner box/I Outer box #2

RF Exposure Info

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100399S01 Page 1 of 36 TEST REPORT APPLICANT : Intelligent Locations PRODUCT NAME : Infant Beacon MODEL NAME : ILAT-LB100 BRAND NAME : N/A FCC ID : 2BTDPILATLB100 STANDARD(S) : FCC 47 CFR Part 2 (2.1093) IEEE 1528-2013 RECEIPT DATE : 2025-10-30 TEST DATE : 2025-10-31 ISSUE DATE : 2026-04-20 Edited by: Pang Siyu (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100399S01 Page 2 of 36 DIRECTORY 1. Statement of Compliance·································································································· 5 2. Technical Information ········································································································ 6 2.1. Applicant and Manufacturer Information ····································································· 6 2.2. Equipment under Test (EUT) Description ···································································· 6 2.3. Environment of Test Site/Conditions ··········································································· 7 3. Specific Absorption Rate (SAR) ······················································································· 8 3.1. Introduction······················································································································ 8 3.2. SAR Definition ················································································································· 8 4. RF Exposure Limits ··········································································································· 9 4.1. Uncontrolled Environment ····························································································· 9 4.2. Controlled Environment ································································································· 9 5. Applied Reference Documents ······················································································ 10 6. SAR Measurement System ····························································································· 11 6.1. E-Field Probe ················································································································· 12 6.2. Data Acquisition Electronics (DAE) ············································································ 13 6.3. Robot ······························································································································ 13 6.4. Measurement Server ····································································································· 14 6.5. Light Beam Unit ············································································································· 14 6.6. Phantom ························································································································· 14 6.7. Device Holder ················································································································ 15 6.8. Data Storage and Evaluation ······················································································· 16 6.9. Test Equipment List ······································································································ 18 7. Tissue Simulating Liquids ······························································································ 19 8. SAR System Verification ································································································· 21 8.1. Purpose of System Performance Check ···································································· 21 8.2. System Setup ················································································································· 21 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100399S01 Page 3 of 36 8.3. Validation Results ········································································································· 22 9. EUT Testing Position ······································································································· 24 9.1. Body-worn Configurations ·························································································· 24 9.2. Hotspot Mode Exposure Position Conditions ·························································· 24 10. Measurement Procedures ······························································································· 25 10.1. Spatial Peak SAR Evaluation ······················································································· 26 10.2. Power Reference Measurement ·················································································· 26 10.3. Area Scan Procedures ·································································································· 26…

Text truncated - open the document above for the full version.

RF Exposure Info

Attestation Statements

2025-12- 08 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID : 2BTDPILATLB100 [ Intelligent Locations ] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature: Name: Daniel Mogin 2025-12-08 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID : 2BTDPILATLB100 Intelligent Locations certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Name: Daniel Mogin

RF Exposure Info

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100399S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2025.10.31 Bluetooth_BLE 1Mbps_Front_0mm_Ch0 Communication System: UID 0, Bluetooth (0); Frequency: 2402 MHz;Duty Cycle: 1:1.312 Medium: HSL_2450 Medium parameters used: f = 2402 MHz; σ = 1.808 S/m; ε r = 39.348; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: ES3DV3 - SN3295; ConvF(4.7, 4.7, 4.7) @ 2402 MHz; Calibrated: 2025.08.15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1324; Calibrated: 2025.08.15 - Phantom: Twin-SAM; Type: QD 000 P41 Ax; Serial: 2020 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch0/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.0220 W/kg Ch0/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.3 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0 W/kg SAR(1 g) = 0.003 ; SAR(10 g) = 0.002 Smallest distance from peaks to all points 3 dB below: Larger than measurement grid (> 15 mm) Ratio of SAR at M2 to SAR at M1 = 19.2% Maximum value of SAR (measured) = 0.00114 W/kg 0 dB = 0.00114 W/kg = -29.43 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100399S01

RF Exposure Info

Text truncated - open the document above for the full version.